Manuale d’uso / di manutenzione del prodotto 12K300 del fabbricante Briggs & Stratton
Vai alla pagina of 16
Document: - page 1 (Black) Screen angle and frequency: 45.0000, 150.0000 Operating & Maintenance Instructions Model 12K300 Intek E Series for Pump applications covered in this manual FORM NO. 276797-1/06 PRINTED IN U.S.A. Copyright 2006 by Briggs & Stratton Corporation www .
Document: - page 2 (Black) Screen angle and frequency: 45.0000, 150.0000 2 Safety References The safety alert symbol ( ) is used to identify safety information about hazards that can result in personal injury . A signal word (DANGER, WARNING, or CAUTION) is used with the alert symbol to indicate the likelihood and the potential severity of injury .
Document: - page 3 (Black) Screen angle and frequency: 45.0000, 150.0000 3 Engine Features 1. Engine Identification Model T ype Code 2. Spark Plug 3 . Oil Fill 4. Oil Drain 5. Stop Switch 6. Star ter Handle 7. Air Cleaner 8. Choke Contr ol 9. Kerosene T ank 10.
Document: - page 4 (Black) Screen angle and frequency: 45.0000, 150.0000 4 Operator Safety Kerosene and its vapors are extremely flammable and explosive. Fire or explosion can cause severe burns or death. WHEN ADDING FUEL Turn engine OFF and let engine cool at least 2 minutes before removing fuel cap.
Document: - page 5 (Black) Screen angle and frequency: 45.0000, 150.0000 5 Allow muf fler , engine cylinder and fins to cool before touching. Remove accumulated combustibles from muffler area and cylinder area.
Document: - page 6 (Black) Screen angle and frequency: 45.0000, 150.0000 6 Oil Recommendation Use a high quality detergent oil classified “For Service SF , SG, SH, SJ” or higher . Do not use special additives. Determine best grade for use by temperature during operation, see chart.
Document: - page 7 (Black) Screen angle and frequency: 45.0000, 150.0000 7 Fuel Recommendation Kerosene Use clean, fresh kerosene. Fr esh kerosene prevent s gum fr om formi ng in the fuel system or on essential carbur etor part s. Pur chase kerosene in quantit y that can be used within 30 days.
Document: - page 8 (Black) Screen angle and frequency: 45.0000, 150.0000 8 Starting Engine 1. Check oil level. 2. Fill kerosene tank with kerosene. 3. Fill petrol tank with petrol per the equipment manufacturer’ s instructions. 4. Move CHOKE to choke position (A).
Document: - page 9 (Black) Screen angle and frequency: 45.0000, 150.0000 9 Operation Do not tip engine or equipment at angle which causes kerosene or petrol to spill. The manufacturer of the equipment on which this engine is installed specifies top speed at which the engine will be operated.
Document: - page 10 (Black) Screen angle and frequency: 45.0000, 150.0000 10 Engine Specifications Operation of this engine is for the application it was intended for . All the components used to build this engine assembly must remain in place for the proper operation of this engine.
Document: - page 11 (Black) Screen angle and frequency: 45.0000, 150.0000 11 Engine Maintenance Regular maintenance will improve the performance and extend the life of the engine. See any Authorized Briggs & Stratton Dealer for service. Use only genuine Briggs & Stratton parts.
Document: - page 12 (Black) Screen angle and frequency: 45.0000, 150.0000 12 Changing Oil Change oil after first 5 to 8 hours of use , then every 50 hours. Change oil every 25 hours when operating the engine under heavy load or in high temperatures. 1.
Document: - page 13 (Black) Screen angle and frequency: 45.0000, 150.0000 13 Cleaning Debris Daily or before every use, clean accumulated debris from engine. Keep linkage, spring and controls clean. Keep area behind and around muffler free of any combustible debris.
Document: - page 14 (Black) Screen angle and frequency: 45.0000, 150.0000 14 Storage Kerosene and its vapors are extremely flammable and explosive. Fire or explosion can cause severe burns or death.
Document: - page 15 (Black) Screen angle and frequency: 45.0000, 150.0000 15 W arranty Effective January 1, 2006 replaces all undated W arranties and all Warranties dated before January 1, 2006.
Document: - page 16 (Black) Screen angle and frequency: 45.0000, 150.0000 16 About Y our Engine W arranty Briggs & Stratton welcomes warranty repair and apologizes to you for being inconvenienced. Any Authorized Service Dealer may perform warranty repairs.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Briggs & Stratton 12K300 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Briggs & Stratton 12K300 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Briggs & Stratton 12K300 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Briggs & Stratton 12K300 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Briggs & Stratton 12K300, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Briggs & Stratton 12K300.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Briggs & Stratton 12K300. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Briggs & Stratton 12K300 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
