

Quick Start Guide | 安裝指南
安装指南 | 取扱説明書
빠른 가이드| Mode d'emploi
Manual de instrucciones | Краткое руководство




RS232 Adapter Cable L-Mount Brackets Screws for Mount Drilling Paper
* The power plug will vary depending on the standard power outlet of the country where it is sold.




2 3 4 5 6 7
1 Status LED 4 RS232 In/Out Port 7 Kensington Lock
2 IR Sensor 5 DC 12V Power Plug
3 USB 3.1 Type B Port 6 PoE Port*
* Power over Ethernet (PoE), compatible with IEEE 802.3AT/802.3AF. Please use CAT 5e FTP cable
(not included.)


Make sure the cable is well connected to the
Use the USB 2.0 cable included in the package.
CAM520 Pro2 has the USB 3.1 port which is USB


remote camera control.
To ensure stability of IP video streaming, please
use CAT 5e FTP cable.
[Notes]


Press and hold the number button “ ”
for 1 second to enable or disable RTMP
streaming function.
Press and hold the number button “ ”
for 1 second to force camera to enter
sleep mode. This will end any video
streaming. To wake up the camera,
press the button or any directional button
for 1 second. This mode is not functional
while USB streaming is on.
only have one camera and do not need
to adjust any setting, the default is
* Not supported for CAM520 Pro2
camera 1. If you press camera 2 or 3 on
the remote control, you will find your
Preset ( ): The Preset button on the remote serves 2 functions.
remote can’t control your camera. In this
case, please press camera 1 on your
To Save a Preset - Move camera to desired position. Press and hold the preset button until you receive the save message on the screen. Select preset position button 0-9 to store the current camera position. Repeat steps if needed.
remote again.
to switch the SmartFrame function
among Manual Framing/Auto Framing/
To Load a Preset - Press the preset button and preset position button 0-9 to load a saved camera position. Repeat steps if needed.
Preset Framing modes. A message (as
figures shown) will display on the screen
Press and hold the number button “ ” for 1 second to turn on or off the WDR function.
to indicate the mode.
Press and hold the number button “ ” for 1 second to turn on or off the SmartFrame function.
[Note] SmartFrame deploys face and
body detection technology. People
wearing masks and side facial profiles
can still be detected. The maximum
detection distance is 7-10 meters.
Set up preset points in advance (Only for
Preset point 1-9. Preset 0 is for home
position).
AAA Batteries (required)

to mount the camera.
package).
L-mount brackets on the wall.
corresponding connection ports.
the L-mount brackets.


A computer is required to use this device.
® Teams, Skype for Business,
Skype, Google Meet, Intel
® Unite™, RingCentral, BlueJeans, V-Cube, LiveOn, CyberLink U
®, TrueConf, Adobe Connect, Cisco WebEx
®, Fuze, GoToMeeting™, Microsoft
Vidyo, vMix, WebRTC, Wirecast, XSplit.
application setup guide for details).
[Note] CAM520 Pro2 is a Plug-n-Play Conference Camera. The system requires no special drivers. For
advanced setting and firmware update, please download PTZApp 2.
CAM520 Pro2 has an Ethernet port for IP streaming and allows administrators to remotely control and
set up the camera via an internet access. Moreover, CAM520 Pro2 also supports RTSP and RTMP
functions. For more details, please refer to user’s manual or contact our technical support.
) and connect CAM520 Pro2 to PC with USB cable.


) to edit IP address**.

Meeting · ® Lync™,

aver4321).
[Note] The browser supports:
connection. Unplug the USB cable.


* In PTZApp2, user can change the IP address setting of CAM520 Pro2, configure the parameters of
the camera, set up AI tracking functions and some advanced image settings, pan, tilt, and zoom the
camera. Please refer to the user manual for details.
Please go to https://www.aver.com/download-center (Global & European Headquarters) or
https://www.averusa.com/business/support/ (USA) to download the PTZApp 2. After downloading,
double-click on the file and follow the on-screen instructions to complete the installation.
After installing the PTZApp 2, double-click on the PTZApp 2 icon to run the application.
** To support IP address changes in groups, user can download AVer IP Finder app.
Headquarters) or https://www.averusa.com/business/support/ (USA).

Logout

pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against
harmful interference when the equipment is operate din a commercial environment. This equipment generates,
uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference at
his own expense.
could void the user's authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This is a class A product. In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
This Class A digital apparatus complies with Canadian ICES-003.
Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the
Instructions.
COPYRIGHT ©2021 AVer Information Inc. All rights reserved.
MORE HELP For FAQs, technical support, software and user manual download, please visit: Global: https://www.aver.com/download-center/ USA: https://www.averusa.com/business/support/ European Headquarters: https://www.aver.com/download-center/ Technical Support: Global: https://aver.com/technical-support USA: https://averusa.force.com/support/s/contactsupport European Headquarters: https://www.avereurope.com/technical-support/
CONTACT INFORMATION Global AVer Information Inc. https://www.aver.com 8F, No.157, Da-An Rd., Tucheng Dist., New Taipei City 23673, Taiwan Tel: +886 (2) 2269 8535
USA AVer Information Inc. https://www.averusa.com 668 Mission Ct., Fremont, CA 94539 Tel: +1 (408) 263 3828 Toll-free: +1 (877) 528 7824 Technical support: support.usa@aver.com
European Headquarters AVer Information Europe B.V. https://www.avereurope.com Westblaak 140, 3012KM, Rotterdam, Netherlands Tel: +31 (0) 10 7600 550 Technical support: eu.rma@aver.com






2 3 4 5 6 7
1 狀態指示燈 4 RS232 輸入/輸出連接埠 7 Kensington 防盜孔
3 USB 3.1 Type B
*Ethernet 供電(PoE),與IEEE 802.3AT/802.3AF 相容。請使用CAT 5e FTP 纜線(未含)。
6 PoE 連接埠*

1. 將鏡頭連接至電源插座。




[注意]
為確保IP 視訊串流的穩定性,請使用CAT 5e FTP

多溴聯苯
六價鉻
多溴二苯醚
(PBB)
電路板及零組件(電子料
- ○
塑膠組件(外殼或導電泡
○
金屬組件(鐵殼或鐵條或
- ○
配件(電源供應器或遙控
- ○
紙製品及包裝件(紙盒或
○
備考1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。
the restricted substance exceeds the reference percentage value of presence condition.
percentage of reference value of presence.
這是甲類的資訊產品,在居住的環境中使用時,可能會造成射頻干擾,
在這種情況下,使用者會被要求採取某些適當的對策






2 3 4 5 6 7
1 LED 状态灯 4 RS232 In/Out 接口 7 Kensington 防盗孔
3 USB 3.1 Type B 接口 6 PoE 接口*
*以太网供电 (PoE),与IEEE 802.3AT/802.3AF 兼容。请使用CAT 5e FTP 线缆(未包括在内。)

1. 将摄影机与电源插座相连接。


![Page 20 of the AVer Conference Camera user manual — [注]](/cdn/reader/90/9047f57caee25c9743417b4a609121583b8039aff3b21f87d728cff1964884e4/images/page-20.webp?w=400)

请使用CAT 5e FTP 线缆以确保IP 视频串流的稳定性。
开关/PoE开关

2. 使用螺丝(未包括在内)将L 型安装支架 A 固定在墙上。
[注] 对于水泥墙:M4 x 20 mm 自攻螺丝(x4) + 塑料锥形胀管
对于木质墙:M4 x 20 mm 自攻螺丝(x4)
[注] 对于水泥墙:M4 x 20 mm 自攻螺丝(x2) + 塑料锥形胀管
对于木质墙:M4 x 20 mm 自攻螺丝(x2)


® Teams、Skype 商业版、Skype、Google Meet、
® Unite™、RingCentral、BlueJeans、V-Cube、LiveOn、CyberLink U Meeting
3. 此时即可进行视频通话操作。
[注] CAM520 Pro2 是一款即插即用型会议摄影机。该系统不要求特殊的驱动程序。对于高级设置和固件
CAM520 Pro2 具备用于IP 串流的以太网接口,可让管理员通过互联网接入来进行远程控制和摄影机的设
置。而且,CAM520 Pro2 亦支持RTSP 和RTMP 功能。如需了解更多详情,请参阅用户手册或是联系我们的
1. 请确保CAM520 Pro2 可与互联网连接。
)以编辑IP 地址**。
Pagine di riferimento in questo manuale: produttore, supporto e download.
I possessori del prodotto e il nostro team di solito rispondono entro 24 ore, e la tua domanda sarà utile anche ad altri.
Invia la prima domanda: risponderanno altri possessori o il nostro team.