


Press on the PMS ELD icon.

Press Yes.
Login/Certification of Records


Press Log In. You do NOT need to select anything from the drop down menu.

Enter your driver PIN and Press Next.
Login/Certification of Records


Enter your Truck Number and Press Next.

Enter your Trailer Number and Press Next.
Login/Certification of Records


Answer Yes or No to the posed question. If yes, you can continue logging in. Note: You may have to Press Yes multiple times if you have been off duty for multiple days.

If you select No from this screen, you must fill out some additional information.
Login/Certification of Records


Press Add Event to enter any missing information.

Fill out the form and when you are finished, Press Save. You will then be returned to the final Login screen.
Login/Certification of Records


Once your data entry is recorded, Press Close.

If you did not enter sufficient data, you must Press Close, which will take you back to the previous screen.
Login/Certification of Records


Select the Product you are carrying and Press Finish.
Login/Certification of Records

Unassigned Record ***An Unassigned Record prompt may show up next if the truck was driven recently but no driver was logged in. All truck moves must be assigned to a driver.***

Press Yes or No. -If you select Yes, then you will claim the previous driving logs. -If you select No, then the unassigned logs will automatically be sent to the office and be assigned from there.
***If the office assigns a missing log to you, you must accept the missing event(s).***

Press Accept OR Decline, then press Finish.


Press on the Inspections tab.

Press Perform Inspection.
Inspections


Press Satisfactory. Doing so will check-mark all the above boxes. You may then unselect any boxes that are not satisfactory. Sign in the box and Press Save. Note: if you Press Non-Satisfactory, the truck cannot be driven.

If you would like to view any previous inspections, select it from the list Press View Inspection.
Inspections

Press on the Home tab to return to the Home Screen.
Inspections


If any Malfunctions or Diagnostics exist, they will appear on this screen.
Press on "Malfunctions" or "Diagnostics" to read the details of each.

Press on any "Malfunction" or "Diagnostic" line to view the details of each. For a complete list of Data Diagnostic / Malfunction Events, please see the last page of the ELD manual.
Malfunctions/Diagnostics


This screen shows any Malfunctions that are present. Press Close to return to the home screen.
***If a Malfunction occurs over an extended period of time and paper logs
must be used, then a written notice of the Malfunction must be provided and turned in to the main office within 8 days.***

This screen shows any diagnostics that are present. Press Close to return to the home screen.
Malfunctions/Diagnostics

Diagnostics/Malfunctions Will the Diagnostic Actions Required clear automatically? Power Data Turn on tablet before you start Yes, if power is restored. (ex. ELD does not record the engine the truck engine turning on or off in the past 24 hours) Engine Syncronization Data Plug in VNA cord Yes, if VNA communicates with (ex. VNA could be unplugged or defective) the ELD. Missing Required Data Elements Edit any past events that are Yes, once no past events are (ex. a data entry must include either highlighted in red missing data. 1. city, state, and zip code OR 2. mile marker and intersection) Data Transfer Call PMS No, the issue must be resolved (ex. The "Officer" function is not working) by PMS Unidentified Driving Records Claim any unlogged driving time Yes (ex. The truck was driven without a OR reject the driving time and it driver being logged in) will be assigned by the home office
Will the Malfunction Actions Required clear automatically? Power Compliance Check power cord Yes, if power is restored and (ex. 30+ minutes of engine hours has is fully functional for 24 hours accumulated without the tablet being *Call home office if power does turned on) not restore or if problem persists Engine Syncronization Compliance Check VNA cord Yes, if VNA communicates with (ex. VNA could be unplugged or defective) the ELD *Call home office if problem persists Timing Compliance Call PMS No, the timing function (ex. The tablet and server are showing between the server and ELD different clock times) must be resolved by the home office Positioning Compliance Check external GPS unit on ELD Yes, if the GPS is fully (ex. The truck was moved while the unit to make sure it has power functional for 24 hours ELD was turned off and it could not and is plugged into the tablet register the movement)
*Call home office if the problem persists Data Recording Compliance Call home office No, the issue must be (ex. There is a problem with the ELD resolved by the home office recording and storing data on the tablet) Data Transfer Compliance Call home office No, the issue must be (ex. the "Officer" function is not working resolved by the home office and has failed multiple times)

Duty Status/ On Duty
Press On Duty.
The "Time Until Break" field has been highlighted to show your time remaining until a break is required if there is less than one hour remaining.

Press on HOS to review your current Hours of Service.

On the HOS screen you can see your current day's Off Duty, Personal, Driving, and On Duty recorded times. To Navigate between days, you can Press the Previous Day or Next Day buttons. To view driving records, Press Driver Records.
Duty Status/HOS


To view Unidentifed Records, Press the Unidentified Records button.
is for viewing only. To return from the Unidentifed Records screen, Press Close.
Duty Status/HOS

Duty Status/HOS 7 Day
Press on HOS 7 Day.

On the HOS screen you can see your current day's Off Duty, Personal, Driving, and On Duty recorded times. To add a document (ex. BOL), Press the Add Document button.

Duty Status/HOS 7 Day

Enter a document number and Press Save. You will be returned to the HOS 7 Day Page.



If an event must be added or edited, Press the Edit button.

To create an event, Press Add Event. Note: If you missed a previous punch, you will need to add the punch here. If you missed an entire shift, you will need to add two events: one for the opening punch and another event for a closing punch.
Editing HOS


Press the field located under Time.

Press the Hour, Minute, and AM/PM fields to select and use the arrows on the right to adjust the time. Press Save when finished and it will return you to the previous screen.
Editing HOS

Press the field located under New Status (this field defaults to "Off Duty").

Once the desired New Duty Status is selected, Press Save. You will be returned to the previous screen.
Editing HOS

Press Save when finished. Note: The Time and New Status default to 12:00 AM and Off Duty, so remember to change those if necessary. Also, a comment is needed or it won't let you save.

This is the confirmation screen that approves your event change. Press Close. Press Close.
Editing HOS


From this page you will be able to see all of your added events. You may choose to Add Event or Edit Event (only if needed). Press Close to return to the home screen. Note: If you missed an entire shift, you will need to add two events: one for the opening punch and another event for a closing punch.
Editing HOS

Duty Assignment Troubleshooting Duty Assignment Troubleshooting If you are on "Personal" time and turn the engine off, when you turn the engine back on you will be asked if you are still on "Personal" time. (Answer Yes or No) Note: If you Press No, you will still be "Off Duty".

***Automatic Switching of Duties May Occur if: 1. You exceed 5 mph (will change from "On Duty" to "Driving") 2. You are unmoved for 5 minutes, you will be asked if you are still driving. If you answer Yes, then your duty will remain "Driving". If you answer No, then your duty will change from "Driving" to "On Duty"
If you do not answer the prompt within 1 minute, your duty will be automatically changed from "Driving" to "On Duty".
***Note: Once your status is set to "Driving", you must come to a complete stop for 3 seconds before you can change your status.***
Duty Status/Yard Move

Press on Yard Move if you are moving a vehicle within a plant lot. Note: All yard moves must be recorded since the truck computer will record a change in GPS location.

Type in your Reason for a Yard Move and Press Save. Note: If you are on "Yard Move" and turn the engine off, when you turn the engine back on you will NOT be asked if you are still on "Yard Move". Your status will automatically change to "On Duty".

Press on Sleeper or Driving to record your current status. Note: All changes will be recorded in your HOS log.
Officer

If a DOT Officer wishes to Transfer data, Press Officer. Also be prepared to show HOS 7 Day.

Select which method of data transfer the officer requests. You will be automatically directed to the next page. You may Press Close to return to the Home screen. For further "Officer" instructions, refer to appendix A (in the back of the manual).
Officer


Enter a comment for the data transfer and Press Save.

Once your data transfer is confirmed, Press Close.
Off Duty/ Personal

Press Off Duty, then Press Personal.

Type in a reason for your Personal time and Press Save.
Logging Out

Press Log Out. Note: You must be "Off Duty" to be able to select "Log Out".

Press Yes. Note: Once you log out, data will begin to upload to the server. Make sure you have a good Wifi signal or else the upload may get disrupted.
Logging Out


Press Yes.
Closing Application


Press Close.

Press Yes.
Additional Support


For Additional Support, Press the PMS icon in the top left of the Home Screen.

For Additional Support, Call the phone number listed.

If you are pulled over by a DOT officer, you may transfer data in 3 ways using the "Officer" button. The instructions for each are listed below:
USB 1. Insert the flash drive into the USB port of the tablet. (The flash drive is provided by the DOT officer) 2. Press the USB button. 3. A screen will pop up that will verify that the data transfer was successful.
Bluetooth 1. Press the Bluetooth button 2. Press "Add Bluetooth or other device" 3. In the following pop-up box, when asked which type of device you want to add, press "Bluetooth". (It will be the top option) 4. Select the device you wish to pair to from the list (the DOT officer will know which one).

Web 1. Press the Web button 2. A screen will pop up that will verify that the data transfer was successful. Note: You must have internet access for this function to work








































































Problemi comuni, cause probabili e soluzioni.
| Problema | Possibile causa | Soluzione | |
|---|---|---|---|
| Engine Syncronization Data (ex. VNA could be unplugged or defective | p.15 | ||
| Engine Syncronization Data (ex. VNA could be unplugged or defective | p.15 | ||
| Missing Required Data Elements (ex. a data entry must include either 1. city, state, and zip code OR 2. mile marker and intersection) | p.15 | ||
| Missing Required Data Elements (ex. a data entry must include either 1. city, state, and zip code OR 2. mile marker and intersection) | p.15 | ||
| Data Transfer (ex. The "Officer" function is not working) | p.15 | ||
| Data Transfer (ex. The "Officer" function is not working) | p.15 | ||
| Unidentified Driving Records (ex. The truck was driven without a driver being logged in) | p.15 | ||
| Unidentified Driving Records (ex. The truck was driven without a driver being logged in) | p.15 | ||
| Check power cord | p.15 | ||
| *Call home office if power does | p.15 | ||
| not restore or if problem persists | p.15 | ||
| Engine Syncronization Compliance (ex. VNA could be unplugged or defective) | Check VNA cord | p.15 | |
| Engine Syncronization Compliance (ex. VNA could be unplugged or defective) | p.15 | ||
| Engine Syncronization Compliance (ex. VNA could be unplugged or defective) | *Call home office if problem | p.15 | |
| Engine Syncronization Compliance (ex. VNA could be unplugged or defective) | persists | p.15 | |
| Timing Compliance (ex. The tablet and server are showing different clock times) | Call PMS | p.15 | |
| Timing Compliance (ex. The tablet and server are showing different clock times) | p.15 | ||
| Positioning Compliance (ex. The truck was moved while the ELD was turned off and it could not register the movement) | Check external GPS unit on ELD | p.15 | |
| Positioning Compliance (ex. The truck was moved while the ELD was turned off and it could not register the movement) | unit to make sure it has power | p.15 | |
| Positioning Compliance (ex. The truck was moved while the ELD was turned off and it could not register the movement) | and is plugged into the tablet | p.15 | |
| Positioning Compliance (ex. The truck was moved while the ELD was turned off and it could not register the movement) | p.15 | ||
| Positioning Compliance (ex. The truck was moved while the ELD was turned off and it could not register the movement) | *Call home office if the problem | p.15 | |
| Positioning Compliance (ex. The truck was moved while the ELD was turned off and it could not register the movement) | persists | p.15 | |
| Data Recording Compliance (ex. There is a problem with the ELD recording and storing data on the tablet) | Call home office | p.15 | |
| Data Recording Compliance (ex. There is a problem with the ELD recording and storing data on the tablet) | p.15 | ||
| Data Transfer Compliance (ex. the "Officer" function is not working and has failed multiple times) | Call home office | p.15 | |
| Data Transfer Compliance (ex. the "Officer" function is not working and has failed multiple times) | p.15 |
I possessori del prodotto e il nostro team di solito rispondono entro 24 ore, e la tua domanda sarà utile anche ad altri.
Invia la prima domanda: risponderanno altri possessori o il nostro team.