Manuale d’uso / di manutenzione del prodotto SPZ50 del fabbricante Boston Acoustics
Vai alla pagina of 26
.
Index Introduction Page 2 Specifications Page 3 Dimensions Page 4 Included Parts and Accessories Page 6 T weeter Installation Page 8 Axis Mount / Phase Plug Installation Page 10 SPZ50 W oofer Installa.
Introduction Thank you for purchasing the Boston Acoustics SPZ component system. Nothing better describes SPZ components than best-in-class. With nearly 1-inch of peak-to-peak excursion, SPZ delivers more bass from a standard size speaker opening.
3 Specifications Model: SPZ60 SPZ50 Nominal Size: 6 1 ⁄ 2 " (165mm) 5 1 ⁄ 4 " (135mm) RMS Power Handling: 150w 150w Max Power Handling: 300w 300w Nominal System Impedance: 3 Ω 3 Ω W .
SPZ50 Woofer 92.1mm 3.62” 61.9mm 2.54” 36mm 1.42” 119mm 4.69” 36mm 1.42” 67.4mm 2.65” 97.6mm 3.84” 134mm 5.27” SPZ60 Woofer 4 Dimensions.
Dimensions 5 110mm 4.33” 197mm 7.75” 56.1mm 2.21” SPZ Crossover SPZ T weeter 1 8mm .71” 27mm 1.1” 43mm 1.69” 52mm 2.05” 38mm 1.5” 51mm 2”.
SPZ60 Included Parts and Accessories: 6 # Description Quantity 1 SPZ60 Woofer 2 2 T ype-M1 1" Alloy Dome T weeter 2 3 SPZ60 Crossover 2 4 T weeter Grille 2 5 T weeter Axis-Mount 2 6 T weeter Flus.
SPZ50 Included Parts and Accessories: 7 # Description Quantity 1 SPZ50 Woofer 2 2 T ype-M1 1" Alloy Dome T weeter 2 3 SPZ50 Crossover 2 4 T weeter Grille 2 5 T weeter Axis-Mount 2 6 T weeter Flus.
8 T weeter Installation: Flush Mount 19 18 17 6 2 4 1) Drill a hole for the tweeter cup (1 3 ⁄ 4 ”/ 45mm) making sure that there is adequate depth available ( 3 ⁄ 4 ”/ 19mm). 2) Connect the speaker wires to the tweeter cup . 3) Insert the tweeter cup into the mounting hole.
T weeter Installation: Angle Mount 18 21 7 22 8 2 4 19 18 17 6 2 4 1) Drill a hole for the speaker wire and pre-drill for the mounting screws if necessary 2) Mount the bottom cup to the mounting surface using the provided screws routing the speaker wires through the center hole.
10 SPZ W oofer Axis Mount Installation: 10 4 2 27 5 1 1) Insert the axis mount into the woofer . 2) Insert and hand-tighten the retaining screw with the provided tool . 3) Insert the tweeter into the axis mount , twist clockwise to lock the tweeter into position.
SPZ W oofer Phase Plug Installation: 10 27 26 1 1) Insert the phase plug into the woofer . 2) Insert and hand-tighten the retaining screw using the provided tool .
SPZ50 W oofer Installation: 9 1 32 11 12 13 14 1) Install the gaskets on the mounting flange of the woofer and the back side of the 5 1 ⁄ 4 ” (135mm) adapter ring . 2) Mount the speaker into the speaker location using the provided screws . 3) Position the axis mount into the desired location (if applicable), refer to page 17.
13 SPZ60 W oofer Installation with Grille: 9 9 1 29 9 11 12 2 1 14 13 1) Install the gaskets on the mounting flange of the woofer and the back side of the 6” (160mm) adapter ring . 2) Mount the speaker into the speaker location using the provided screws .
9 9 1 1 29 9 31 3 9 30 9 11 12 23 2 16 15 14 13 14 SPZ60 W oofer Installation with 6 1 ⁄ 2 ” (165mm) V ariMount ™ Adapter Rings: 1) Install the gaskets on the mounting flange of the woofer and the back side of the 1 ⁄ 2 ” (13mm) spacer ring (if applicable).
SPZ60 W oofer Installation with 5 x 7” V ariMount ™ Adapter Rings: 15 9 9 1 1 1 29 9 31 31 9 30 9 28 11 12 23 23 16 15 15 16 20 1 1) Install the gaskets on the mounting flange of the woofer and the back side of the 1 ⁄ 2 ” (13mm) spacer ring (if applicable).
16 Connecting Speaker Wires: 10 10 1) Strip 1 ⁄ 4 ” (10mm) of shield off of the speaker wires. 2) Insert the wire into the speaker terminal observing proper polarity . 3) Hand-tighten the gold set screws using the provided tool (2.5mm). ( Note: do not overtighten the set screws.
17 SPZ Axis Mount Positioning: 10 The axis mount on the SPZ woofer is designed so it can be positioned to properly direct the tweeter’ s output towards the listening position. 1) Loosen the retaining screw located on the face of the axis mount with the provided tool (2.
10 25 24 Crossover Installation: 20 1) Remove the four screws and located at each corner of the top panel. 2) Once the screws are removed, the cover will lift off the chassis. 3) Using the provided screws , secure the crossover to a solid surface. Note; Due to shock and vibration, the crossovers should not be installed in the doors of the vehicle.
19 Crossover Configuration: Axis / Comp Mount Switch: The “Axis/Comp” switch optimizes the output from the crossover for the configuration of the component system. Use the “Axis” setting if the tweeter is installed in the axis mount, use the “Comp” setting if the tweeter is installed separate from the woofer .
SPZ System Wiring (Standard): Standard Wiring (Coaxial Configuration) Standard Wiring (Component Configuration) 20.
SPZ System Wiring (Bi-Amplification / Bi-Wiring): Bi-Amplification Bi-Wiring 21.
Contact Information Contacting Boston For questions regarding installation or service, please contact the dealer from whom you have purchased the product or contact us directly at: Boston Acoustics, Inc. 300 Jubilee Drive Peabody , MA 01960 Phone #: 978-538-5000 Fax #: 978-538-5100 Email: support@bostona.
23 Notes:.
24.
Boston Acoustics, Inc. 300 Jubilee Drive, Peabody , MA 01960 USA T : 978.538.5000 F: 978.538.5100 W: bostonacoustics.com 042-002423-0.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Boston Acoustics SPZ50 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Boston Acoustics SPZ50 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Boston Acoustics SPZ50 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Boston Acoustics SPZ50 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Boston Acoustics SPZ50, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Boston Acoustics SPZ50.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Boston Acoustics SPZ50. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Boston Acoustics SPZ50 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
