IT
Sharp logo
Manuale d'uso ufficiale

Sharp PS-920

40 pagine·1 MB·Altoparlante·PDF·ENNLJA
Sharp PS-920
Indice dei contenuti 30 sezioni PS-920 User manual · Party Speaker System · EN ES DE IT FR PL · Important safety instructions · … MostraNascondi
Page 1 of the Sharp PS-920 user manual — Party Speaker System
Pagina 1 · clicca per ingrandire
Pagina 1
Sharp PS-920 — PS-920 User manual diagram (page 1)
Fig. 1 · PS-920 User manual
Sharp PS-920 — PS-920 User manual diagram (page 1)
Fig. 2 · PS-920 User manual

PS-920 User manual

Party Speaker System

EN ES DE IT FR PL

Page 2 of the Sharp PS-920 user manual — PS-920 User manual
Pagina 2 · clicca per ingrandire
Pagina 2
Page 2 of the Sharp PS-920 user manual — PS-920 User manual
Page 3 of the Sharp PS-920 user manual — Built-in Battery Care
Pagina 3 · clicca per ingrandire
Pagina 3

Important safety instructions

  • To reduce the risk of fire, electric shock or damage to this product, do not expose it to direct sunlight, dust, rain and moisture. Never expose it to dripping or splashing and do not place objects filled with liquids on or near the product.
  • Do not place objects fi lled with liquids, such as vases, on the apparatus.
  • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat.
  • Do not place the product where the humidity is high and ventilation is poor.
  • Don’t mount this product on a wall or ceiling.
  • Do not place the unit near TVs, speakers and other objects that generate strong magnetic fi elds.
  • Do not leave the unit unattended when it is in use.
  • Allow at least 30 cm clearance from the rear and the top of the unit and 5 cm from each side. Do not block any ventilation openings of this product. Always ensure that the ventilation openings are not covered with items such as newspapers, table-cloths, curtains, etc.
  • NEVER let anyone, especially children, push anything into holes, slots or any other openings in the unit’s casing as this could result in a fatal electric shock.
  • Storms are dangerous for all electric appliances. If the mains or aerial wiring is struck by lightning, the appliance might get damaged, even if it is turned off . You should disconnect all the cables and connectors of the appliance before a storm.
  • Excessive sound pressure from earphones and headphones can cause hearing loss.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Please, read these safety instructions and respect the following warnings before the appliance is operated:

The lightning fl ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi cient magnitude as to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

In order to prevent fi re always keep candles and other open fl ames away from this product.

Maintenance

  • Unplug the power cable from the power source before cleaning the appliance.
  • Use a soft and clean rag to clean the outside of the unit. Never clean it with chemicals or detergent.

Warning:

Batteries

  • Always follow basic safety precautions when using this applience, especially when children are present.
  • Children should be supervised to ensure that they do not play with the appliance.
  • Do not damage the power cord, neither do not place any heavy objects on it, do not strech it or bend it. Also do not attach extension cables. Damage to the power cord may occur fi re or electric shock.
  • If the supply cord is damaged, it must be replaced by the manufacturer, a service agent or similarly qualied persons in order to avoid a hazard.
  • Ensure that the unit is plugged into an AC 220-240V 50Hz power outlet. Using higher voltage may cause the unit to malfunction or even fi re catching.
  • If the power plug does not fi t into your outlet, do not force the plug into an electrical socket if it does not fi t.
  • Turn off the unit before unplugging it from power source to completely switch it off .
  • Do not disconnect or connect the power cord with wet hands. It may cause an electric shock.
  • NOTE: To disconnect the system completely if it not to be used for a long time, remove the AC power plug from the wall outlet.
  • Ensure that the mains plug is always easily accessible.
  • This product does not contain any parts that are serviceable by the user. In case of a fault, contact the manufacturer or authorised service department. Exposing the internal parts inside the device may endanger your life. The manufacturers guarantee does not extend to faults caused by repairs carried out by unauthorised third parties.
  • Do not use this product immediately after unpacking. Wait until it warms up to room temperature before using it.
  • Ensure this product is used in moderate climates only (not in tropical/ subtropical climates).
  • Place product on a fl at, stable surface that is not subject to vibrations.
  • Ensure the product and its parts is not overhanging the edge of the supporting furniture.
  • Observe the correct polarity when inserting the batteries.
  • Do not expose batteries to high temperatures and do not place them on locations where the temperature might increase quickly, e.g. near the fi re or on the direct sunshine.
  • Do not expose batteries to excessive radiant heat, do not throw them into the fi re, do not disassemble them and do not try to recharge un-rechargeable batteries. They could leak or explode.
  • Never use diff erent batteries together or mix new and old ones.
  • When the Remote Control is not to be used for a long time (more than a month), remove the battery from the Remote Control to prevent it from leaking.
  • If the batteries leak, wipe away the leakage inside the battery compartment and replace the batteries with new ones.
  • Do not use any batteries other than those specied. Do not ingest battery, chemical burn hazard
  • If the battery is swallowed, it can cause severe internal burns in just 2 hours and lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Built-in Battery Care

  • Please observe the following if the product contains a battery:
  • Your product is powered by a built-in rechargeable battery.
  • The battery can be charged and discharged hundreds of times, but will eventually wear out.
  • Unplug the charger from the electrical plug and the product when not in use.

Cd

Page 4 of the Sharp PS-920 user manual — Disposal of this equipment and Batteries
Pagina 4 · clicca per ingrandire
Pagina 4

EN

  • Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime.
  • If left unused, a fully charged battery will lose its charge over time.
  • Leaving the product in hot or cold places, such as in a closed car in the summer and winter conditions, will reduce the capacity and life time of the battery.
  • Always try to keep your device in a cool, moisture-free environment that's less than 32'C.
  • A product with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.
  • If you plan to store your device for longer than six months, fully charge the battery every six months to keep it fresh.
  • The unit should be fully recharged after using the device each time. This will keep the health of the battery.
  • skin or eyes wash immediately with copious amounts of water for several minutes. Seek immediate medical attention for eyes. For spillages again wash immediately with water or soapy water or acid neutralizer. 4. CHARGING (using charging devices). Charging the battery using supplied charger or under the charging condition specifi ed in user manual. Charging the battery under any other conditions may cause the battery to overhead. Emit hydrogen gas, leak, ignitor burst. Don't charge the battery in the inverted position. Overcharging in the inverted position may cause battery leakage from the safety valve.
  • Recharge lead acid batteries after each use to prevent sulfation. Do not store on low charge.
  • Do not allow a lead acid to freeze. An empty battery freezes sooner than one that is fully charged. Never charge a frozen battery.
  • Avoid charging at temperatures above 49°C. 5. HANDLING AND STORAGE Batteries are fi lled with acid and should be kept upright at all times. Store in a cool dry well ventilated place. Exclude storage where sparks may be generated. If the battery is stored for a year or longer without being charged, its service life may be shortened. Store the battery after fully charging it. Otherwise its service life may be shortened. 6. DISPOSAL CONSIDERATIONS Old batteries should be recycled through a registered scheme. The supplier of the new battery will have access to such a scheme. We advise that this is the best way to correctly dispose of failed batteries WARRANTY. Products are warranted against faulty workmanship and/or material according to applicable law only. Proof of purchase is required to claim. Warranty does not cover incorrect fi tment, inadequate charging, accidental damage or faults on other forms of abuse. A battery replaced under warranty is only warranted to the end of the original battery warranty period. Batteries left for long periods out of use will fail owing to neglect. 7. REPLACEMENT BATTERIES Replacement batteries should be of the same type, size, manufacturer and model number, if possible. The replacement battery should be charged to a range of 90 to 95 percent of rated capacity. Capacity will rise to rated value after several charge-discharge cycles or after a period of fl oat operation.

Battery warning!

  • The battery used in this product may present a risk of fi re or chemical bum if mistreated.
  • Do not attempt to open the product or replace the battery. It is built-in and not changeable. Use of other batteries may present a risk of fi re or explosion and the warranty will be terminated.
  • Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste or in a fi re as they may explode.
  • Batteries may explode if damaged.
  • Charging the battery using supplied charger or under the charging condition specifi ed in user manual. Charging the battery under any other conditions may cause the battery to overhead, emit hydrogen gas, leak, ignite or burst. CAUTION! 1. Important safety considerations When charging the battery take note of the charging conditions specifi ed as below.
  • Recharge in upright only.
  • Do not incinerate.
  • Do not use other than the attached AC adapter. 2. To prevent deterioration or damage to the battery
  • Do not drop or subject to strong physical shock. 3. To ensure long battery life
  • The unit should be fully recharged after using each time.
  • If the unit is stored for more than six months without any recharging activity, the battery in the unit will be over discharged, please contact our authorized service center to replace the battery, using over discharged battery will lead to leak, ignite or explode
  • Do not discharge completely.
  • Shutdown the main switch after usage, otherwise an over discharge state may occur.

How to remove the battery for disposal

RISK OF INJURY. WEAR GLOVES WHEN WORKING! The battery should be removed only by authorized service point. 1. Remove 10 screws on the back side of the speaker. 2. Open the main unit case. 3. From printed circuit board disconnect 3 connectors that connect front and back cabinets. 4. In the back cabinet remove 4 screws holding battery in a place. 5. Take out the battery and turn the battery connected wires to face top. 6. Cut off the heat sink tubes from battery wires. 7. Remove the soldering points between the battery and the wires. 8. Remove the batteries from the battery case.

Lead-Acid Battery Safety and Handling Guides

Lead-Acid rechargeable batteries require routine maintenance and care in their use and handling. Read and follow the guidelines in this document to safely use 1. OVERVIEW Batteries not handled and used correctly can be a danger, read the instructions in full prior to carrying out any work on the battery. Batteries are heavy; take care for lifting and carrying. Please read and follow carefully all the instructions in this document, on the battery and in the product handbook. Keep the battery upright to prevent spillage. 2. MAINTENANCE. Replace a battery with new one within the time period specifi ed in the user manual or equipment. Contact authorized service center if any unclear regarding battery checking and replacement. 3. FIRST-AID MEASURES If acid is ingested seek immediate professional medical attention. Do not induce Vomiting and drink a lot of water. In the event of contact with

Disposal of this equipment and Batteries

  • Do not dispose of this product or its batteries as unsorted municipal waste. Return it to a designated collection point for the recycling of WEEE in accordance with local law. By doing so, you will help to conserve resources and protect the environment.
  • Most of the EU countries regulate the disposal of batteries by law. Contact your retailer or local authorities for more information.
  • The shown above appears on electrical and electronivcal equipment and batteries (or the packaging) to remind users of this. If "Hg" or 'Pb' appears below the symbol, this mean that the battery cantains traces of mercury (Hg) or lead (Pb), respectively.
  • Users are requested to use existing return facilities for used equipment and batteries.
Page 5 of the Sharp PS-920 user manual — Trademarks:
Pagina 5 · clicca per ingrandire
Pagina 5

CE Statement:

  • Hereby, Universal Media Corporation sp. z o.o. declares that this audio device is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU. The full text of the EU declaration of conformity is available by following the link <a href="http://www" rel="nofollow noopener" target="_blank">http://www</a> <a href="http://sharp.eu/av/documents-of-confi" rel="nofollow noopener" target="_blank">sharp.eu/av/documents-of-confi</a> rmity

Trademarks:

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG,. Inc.

Page 6 of the Sharp PS-920 user manual — RADIO OPERATION
Pagina 6 · clicca per ingrandire
Pagina 6

EN

Accessories

Front and Back view 23. HANDLE 24. SPEAKERS 25. DISCO LED LIGHT 26. TWEETERS 27. FM ANTENNA 28. VENTILATION HOLES 29. AC SOCKET

  • 1x User manual
  • 1x Microphone
  • 1x EU power cord
  • 1x Quick start guide
  • 1x UK power cord

Guide to the Appliance

Getting Started

Sharp PS-920 — Guide to the Appliance diagram (page 6)
Fig. 3 · Guide to the Appliance

POWER SOURCE

Before using this unit, it is recommended that the internal lead-acid battery (4000mAh) is fully charged. When the battery is full, the charge light will turn green, when charged remove the power cord from the socket. Usage time will be approximately two hours when the battery is fully charged. When the battery charge is low, the charge light will fl ash red. WARNING: Do not attempt to change or replace the battery. This can only be carried out by a qualifi ed engineer.

OPERATION INSTRUCTION

BASIC FUNCTION

TURNING THE UNIT ON/OFF Press the power ON/OFF button to switch the unit on/off .

SETTING THE FUNCTION MODE To change the function modes, press the FUNCTION button repeatedly to choose USB1/USB2/BLUETOOTH/AUX/RADIO function.

Top View 1. 3.5mm AUX IN JACK 2. 6.3mm MIC JACK 1 3. 6.3mm MIC JACK 2 4. USB PORT 1 5. USB PORT 2 6. 10/M./FOLD.+ BUTTON 7. LIGHT BUTTON 8. 10/M./FOLD.- BUTTON 9. ECHO BUTTON 10. EQ BUTTON 11. FUNCTION BUTTON

12. /TUN.- BUTTON 13. /TUN.+ BUTTON 14. P-MODE/M. BUTTON 15. /BT/SCAN BUTTON 16. LCD DISPLAY 17. PAIR INDICATOR 18. SUPER BASS BUTTON 19. POWER ON/OFF BUTTON 20. CHARGE INDICATOR 21. MIC VOL. CONTROL 22. VOLUME CONTROL

ADJUSTING THE VOLUME 1. Rotate the VOLUME knob on the unit to increase or decrease the music volume.

2. Rotate the MIC VOL. knob on the unit to increase or decrease the microphone volume.

BASS ADJUSTMENT Press the SUPER BASS button on unit to increase the bass eff ect.

EQUALIZER (EQ) FUNCTION This unit has a built-in equalizer system, press the EQ button on unit to select a setting that best matches the music style: FLAT, CLASSIC, ROCK, POP (default) and JAZZ.

Sharp PS-920 — BASIC FUNCTION diagram (page 6)
Fig. 4

MICROPHONE ECHO ADJUSTMENT Press the ECHO button on unit turn on or off the microphone echo eff ect.

FLASHING LIGHT There are 5 modes for the DISCO LED lighting. Press the LIGHT button to choose the light modes. L-1: By default mode, blue LED will be on constantly when it is selected. L-2: Blue LED will be on fl ashing mode. L-3: Red LED will be on constantly. L-4: Red LED will be on fl ashing mode. L-5: 7 colors LED will be on fl ashing mode. Press one more time to turn off . There are 2 modes for the decoration LED lighting around the speakers. Press and hold the LIGHT button to choose the light modes. E-1: Default mode, white LED will be on constantly. E-2: White LED will be fl ashing. Press one more time to turn off .

RADIO OPERATION

Listen to FM radio broadcasts. Press the FUNCTION button on the unit, the display reads FM and the radio frequency.

Page 7 of the Sharp PS-920 user manual — MIC JACK OPERATION
Pagina 7 · clicca per ingrandire
Pagina 7
2. To cancel repeat play, press P-MODE/M. button on unit until “ ” disappears from the display.

To repeat all the Tracks 1. Press P-MODE/M. button on unit until the “ ” shows steadily on the display, all tracks on the USB will be played over and over again.

  • TUNING TO A RADIO STATION If you know the station frequency that you want to tune to directly:
  • Tune to a station by press the / TUN.+ or / TUN.- button repeatedly. Hold them to search upward or downward. The station frequency is shown on the display. To tune to a preset station:
  • To tune to the next preset station, press the 10/M./FOLD.+ button.
  • To tune to the previous preset, press the 10/M./FOLD.- button.
2. To cancel repeat play, press the P-MODE/M. button on unit until “ ” disappears from the display.

To repeat the folder (only for USB which contains more than one folder) 1. Press the P-MODE/M. button on unit until “ FOLDER” shows steadily on the display, the current folder will be repeated over and over again.

AUTO PRESET MEMORY/SCAN To scan for stations within reception range and save them to preset memory automatically, press and hold the /BT/SCAN button. After the unit is fi nished scanning, the unit will automatically tune to preset number 1 (P01).

2. To cancel repeat play, press the P-MODE/M . button on unit until “ FOLDER” disappears from the display.

RANDOM PLAY Press the P-MODE/M. button on unit in play mode till the “RAND” shows steadily on the display, the random play will start from next track automatically. Press the P-MODE/M. button on unit again until the “RAND” disappears from the display to cancel.

MANUAL PRESET MEMORY OPERATION Choose which stations to save in preset memory instead of scanning automatically. 1. Use the / TUN.+ or / TUN.- button to tune to the station that you want to save as a preset (e.g., 93.1).

BLUETOOTH OPERATION

1. Press the FUNCTION button on unit to switch to BLUETOOTH function, the LCD will display “bt” and the pair indicator will fl ash at high speed.
2. Press the P-MODE/M. button. “P01” will fl ash on the display to indicate that you are saving the station as Preset Memory 01. (To change the preset memory number, press the 10/M./FOLD.+ or 10/M./FOLD.- buttons.)
2. Turn on the Bluetooth function on the device, scan the unit “PS-920” and connect, then input the password 0000 if required, the pair indicator keep light up to indicate connection done, and the display will show “bt”. Press Play to start playback.
3. Press the P-MODE/M. button to fi nish saving the station (e.g., P01 is now set to 93.1).
4. To save another station, repeat steps 1 to 3. You may save up to 30 FM stations.
3. Rotate the VOLUME knob on the unit or adjust the volume on the external device to increase or decrease the music volume to your desired level.

USB OPERATION

4. Press and hold the /BT/SCAN button to disconnect Bluetooth.

This unit provides two USB ports for music playback. 1. Press the FUNCTION button on unit to select “USB1” or “USB2” mode.

AUX-IN OPERATION

2. Plug the USB memory stick to the USB port on top of the unit. Playback will start automatically from Track 1.
1. Press the FUNCTION button on unit to select the “AUX” mode.
3. To pause playback, press the /BT/SCAN button on unit. The playing time will fl ash on the display.
2. Connect your audio device to the AUX IN jack on the top panel of the unit with an AUX IN cable.(audio cable is not included)
4. To resume playback, press the /BT/SCAN button again.
3. Rotate the VOLUME knob on the unit or adjust the volume on the external device to increase or decrease the music volume to your desired level.
5. To select a desired track, press the /TUN.+ or /TUN.- button respectively during playing until the desired track appears on the display. The unit will start play automatically.
4. Control the playback with your audio device.
6. To search for a particular passage during playback, press and hold the /TUN.+ or /TUN.- button to scan the current playing track at high speed until desired point (passage) appears, then release the button for normal playback mode.

MIC JACK OPERATION

Microphone input is available in all modes. 1. Connect your microphone to the 6.3mm MIC JACK found on the top panel of the unit.

7. To select a song which track number exceeds 10, press the 10/M./ FOLD.+ or 10/M./FOLD.- button each time to skip forward/backward 10 tracks, then press the /TUN.+ or /TUN.- button to select desired track.
2. Rotate the MIC VOL. knob on the unit to increase or decrease the microphone volume.
3. Press the ECHO Button to turn on or off the echo eff ect of the microphone.
8. To select a desired folder (if the USB contains more than one folder), press and hold the 10/M./FOLD.+ or 10/M./FOLD.- button each time to skip forward/backward a folder, then press the /TUN.+ or /TUN.- button to select desired track.

REPEAT PLAY You can play one track or all tracks on the USB repeatedly. To Repeat a Single Track 1. Press P-MODE/M. button on unit during play, the display will show “ ” and the current track will be played over an over again.

Page 8 of the Sharp PS-920 user manual — EN
Pagina 8 · clicca per ingrandire
Pagina 8

EN

Technical specifi cation

ModelPS-920 General Power RequirementsAC100-240V~50/60Hz Power Consumption33 W Power Consumption StandBy<0,5W Power Output2 x 25W (RMS) Total max power output150 W Frequency Response40Hz-15KHz FM FrequencyFM 87.5-108MHz AUX in jack3.5mm Microphone jack6.3mm Operating temperature5°C - +40°C Bluetooth Communication systemBluetooth Standard version 2.1+EDR Reception Range10 meter (line-of-sight distance) Compatible Bluetooth profi lesAdvanced Audio Distribution Profi le (A2DP)

7,3 Kg · 597mm · 259mm 260mm

Fonti

Riferimenti e link

Pagine di riferimento in questo manuale: produttore, supporto e download.

Fai una domanda su Sharp PS-920

I possessori del prodotto e il nostro team di solito rispondono entro 24 ore, e la tua domanda sarà utile anche ad altri.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Nessuna domanda ancora per il dispositivo Sharp PS-920

Invia la prima domanda: risponderanno altri possessori o il nostro team.

Documento originale

Sharp PS-920 manuale in PDF

40 pagine·1 MB·Altoparlante·PDF
Clicca su qualsiasi pagina in alto per aprirla qui
Pagina 1 / …
100%
Caricamento pagine…