
EN ES DE IT FR PL
Product images are for illustration purposes only. Actual product may vary. | Das Bild auf der Verpackung kann vom Inhalt abweichend sein. | Las imágenes del producto son para fi nes ilustrativos solamente. | Le immagini dei prodotti sono solo ai fi ni illustrativi. | Les images du produit sont présentées à titre d’illustration uniquement. | Zdjęcie produktu jest tylko w celach ilustracyjnych. Produkt może się różnić.



Important safety instructions
Please, read these safety instructions and respect the following warnings before the appliance is operated:
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Use only power supply listed in the user manual.
This symbol means that the product should be disposed of in an environmentally friendly manner and not with general household waste.
For indoor use only
Energy effi ciency marking with level VI
Polarity of d.c. power connector
In order to prevent fi re always keep candles and other open fl ames away from this product.
AC voltage · DC voltage · Class II equipment

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,. Inc.
The terms HDMI and HDMI High-Defi nition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.

What is included in the box:
Connect the mains adaptor to the DC power socket on the rear panel of the radio.
Get the Best Reception Extend the telescopic aerial as far as it can go.
Turn On the Radio Press the MODE/STANDBY button to turn on the radio.
Switch to Standby Mode When in use, long press the MODE/STANDBY button to enter Standby mode. Press it again to wake up the radio. The radio will turn into standby mode automatically if no any operations after 15 minutes.
Adjust the Volume Rotate the Volume Knob to adjust the volume to a comfortable level. Listening to the radio at a high volume levels may damage your hearing. Avoid listening at high volume levels for long periods of time.

The fi rst time the radio is used The fi rst time you turn the radio on it will automatically scan for stations. During scanning, the screen will display a slide bar that indicates the progress of the scan and the amount of radio stations that have been found so far. Once the scan has fi nished, the radio will play the fi rst station it fi nds.
EQ function You can change the sound eff ect by pressing the Volume Knob in.
Snooze function When the alarm is sounding in Standby mode, rotate the Volume Knob to activate the SNOOZE function. The alarm will sound again after 5 minutes.
Sleep Time To set the sleep time, repeatedly press the SLEEP button to select from: off , 15, 30, 45, 60, 90 minutes. When the set time has passed, the unit will enter sleep mode.
Select Modes When in use, press the MODE/STANDBY button repeatedly to switch to your desired mode: DAB/DAB+, FM, Bluetooth.
Station Information Press the INFO/MENU button to check the station information.
Time Auto Update The time and date can be updated automatically if the system detects the RDS signal. If the RDS signal is weak or cannot be detected, the time will not automatically update.
Long press the INFO/MENU button to enter the main menu setup screen. Find and enter the <System> screen by pressing the ENTER/SCAN button. Then use the ◄/► button to cycle through the menu options: <Time setup>, <Alarms>, <Sleep>, <Language>, <Prune>, <Station Order>, <Backlight>, <Factory reset>, <SW version>.

Select one of the options and then press the ENTER/SCAN button to access that menu.
After you fi nish the steps above, the time is set up manually.
Mains Adaptor (supplied with the package)
Front Panel

When the <Alarms> appears, 1. Press ENTER/SCAN button to enter the alarm setting screen.
It is possible to store up to 10 of your favourite DAB stations. This will enable you to access your favourite stations quickly & easily. 1. To store a preset, you must fi rst be listening to the station you would like to save.
Once you have saved the stations to the preset stations. You can recall by pressing the PRESET button. Press the ◄/► button to select the stored stations, and press ENTER/ SCAN button to confi rm.
Enter the Sleep time setting screen to select the sleep time: off /15/30/45/60/90 minutes.
Every time you press the INFO/MENU button, the display will cycle through the following display modes: The information is displayed on the lower segment of the LCD display.
Enter Language setting screen, use the ◄/► and ENTER/SCAN buttons to set the system language.
Enter Backlight setting screen, using the ◄/► button to select your desired display backlight level: 3, 2, 1, off . Then press the ENTER/SCAN button to confi rm your selection.
To set the radio to the original settings, enter the Factory reset screen, follow the tips <Factory reset?>, choose <YES> to reset, and the radio will be restarted.
Dynamic Label Segment (DLS) Displays scrolling text information supplied by the broadcaster.
To check the software version of the system.
PTY (Programme Type) Shows the type and description of the programme provided by the DAB/ DAB+ station.
To remove stations that listed but are unavailable. Enter the Prune screen, use the ◄/► button to select <Yes> or <No>, then press the ENTER/SCAN button to confi rm your selection. The unavailable stations now be deleted if you chose <Yes>.
Bit Rate The data rate which the signal is being transmitted.
Frequency Displays the station's transmission channel number and frequency.
Time and Date Displays the time and date information provided by the broadcaster. NOTES: DAB-unlike normal radio, groups together several radio stations and transmits them on one frequency.
Enter the Station order screen, use the ◄/► button to select one of the station orders, then press the ENTER/SCAN button to confi rm.
FM Operations
After turn on the radio, press the MODE/STANDBY button repeatedly to select and enter DAB/DAB+ mode.
Switch to FM mode by pressing the MODE/STANDBY button.
Select Stations
When turning on to DAB/DAB+ mode, the radio will automatically scan the stations it found in this area. Press the ◄/► button to select the previous or next stations, then press the ENTER/SCAN button to activate to play the station.
To search for an FM station from 87.5 to 108.00MHz. 1. Press the ◄ or ► button to skip to go back or go forward the frequency by the step of 0.05MHz.
Long press the INFO/MENU button, when the <Station scan> appears, press the ENTER/SCAN button, then use the ◄/► button to cycle through the scanning options: <Full scan>, <Manual tune>.

Troubleshooting
This product does not contain any parts that are serviceable by the user. In case of a fault, contact the manufacturer or authorised service department. Exposing the internal parts inside the device may endanger your life. The manufacturers guarantee does not extend to faults caused by repairs carried out by unauthorised third parties.
It is possible to store up to 10 of your favourite FM stations. This will enable you to access your favourite FM stations quickly & easily. 2. To store a preset, you must fi rst be listening to the station you would like to save.
Once you have saved the stations to the preset stations. You can recall by pressing the PRESET button. Press the ◄/► button to select the stored stations, and press ENTER/ SCAN button to confi rm.
Press the INFO/MENU button to cycle through the FM information provided by the stations:
Press the MODE/STANDBY button repeatedly to select and enter Bluetooth mode.



234 mm 145 mm
1,2kg KG
I possessori del prodotto e il nostro team di solito rispondono entro 24 ore, e la tua domanda sarà utile anche ad altri.
Invia la prima domanda: risponderanno altri possessori o il nostro team.