
English Deutsch Nederlands Français Italiano Español
Gebruiksaanwijzing
Mode d’emploi Istruzioni operative Instrucciones de funcionamiento
Bouilloire (usage domestique)
Bollitore (utilizzo domestico)
Hervidor (uso doméstico)
Model No. NC-ZK1
NC-DK1



Please make sure to follow these instructions.
In order to prevent accidents or injuries to the user, other people, and damage to property, please follow the instructions below. The following charts indicate the degree of
damage caused by wrong operation.

follows.


lead or mains plug. Following actions are strictly prohibited. Modifying, touching on or placing near heating elements, bending, twisting, pulling, pulled over sharp edges, putting heavy objects on top, bundling the mains lead and carrying the appliance by the mains lead. (
It may cause electric shock, or fire due to short circuit.

lead or mains plug is damaged or the mains plug is loosely connected to the household mains socket. (
It may cause electric shock, or fire due to short circuit. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.
with wet hands. (It may cause electric shock.)
Always ensure that hands are dry before ● handling the mains plug or switching on the appliance.
label of the appliance is the same as your local supply. (It may cause electric shock or fire.) Also avoid plugging other devices into the same household mains socket to prevent electric over heating. However, if you are connecting a number of mains plugs, make sure the total wattage does not exceed the rated wattage of the household mains socket.

Please make sure to follow these instructions.
Insert the mains plug firmly.
Otherwise it may cause electric shock and fire due to heat that may be generated around the mains plug.
)
Clean the mains plug regularly.
Dust and moisture build-up on the mains plug may cause insufficient insulation, which may cause a fire. Unplug the mains plug, and wipe with a
)
dry cloth.
children. Do not let the mains lead hang over the edge of the table or worktop. (It may cause burns, injury or electric shock.)
the power base) in water or splash it with water. (
It may cause electric shock, or fire due to short circuit. Do not allow the bottom of the kettle to ● get wet when filling directly from the tap or placing it in the sink.

appliance. (It may cause fire, electric shock or injury.) Consult the place of purchase or a
Panasonic service centre.
spout during or after use. (It may cause burns.)
Especially keep the appliance out of reach ● of infants and children.
Do not block the spout with a cloth etc.
Hot water may spill out, which may cause burns.
Do not close the lid vigorously.
Hot water may splash out, which may cause burns.
water. This appliance is for boiling water only. (
If you boil the appliance with tea bags, tea leaves, milk, alcohol, boil-in-the-bag products etc., bubbles may form, causing a discharge of liquid which may cause burns.

Please make sure to follow these instructions.
Do not shake or tip over the body.
Hot water may pour out, it may cause burns.
Do not lick the power base connector.
Pay attention when infants and children are ● near the appliance.
metal components such as pins and wires or dust) to adhere to the body connector or power base connector. (
It may cause electric shock, or fire due to short circuit.
Do not use the body as a cooler.
This generates condensation, which may cause electric shock.
or in a microwave. (It may cause fire.)

boiling. (
Hot water may splash out, which may cause burns.
by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. (It may cause burns, injury or electric shock.)
appliance. (It may cause burns or injury.)
Children do not realise dangers that are ● likely to occur because of improper use of appliances.

Please make sure to follow these instructions.
may be ejected. (
Hot water may boil over, which may cause burns. Fill with water between the minimum water ● level and the maximum water level.
immediately and unplug in the unlikely event that this appliance stops working properly. (
It may cause smoking, fire, electric shock or burns. e.g. for abnormal or breaking down
consult the place of purchase or a Panasonic service centre for inspection or repair.

turning on the appliance. (
If the appliance tips over, hot water may spill out, it may cause burns. Otherwise the appliance will keep boiling until it gets empty.
moving the body, turn off the power switch and pick up by the handle. (
Hot water may spill out from the spout, which may cause burns. Do not tilt except when pouring. ●

Please make sure to follow these instructions.
other than those described in these instructions. (It may cause burns or injury.)
Panasonic will not accept any liability if the ● appliance is subject to improper use, or failure to comply with these instructions.
during or after use. (It may cause burns.)
Do not pour hot water or move the
appliance while the water is boiling. (
Hot water may splash out, which may cause burns. )

places.
It may cause electric shock or electrical leakage. Near any open water such as bathtubs, ● sinks, or other containers. (
unplugging the mains plug. Never pull on the mains lead. (
Otherwise it may cause electric shock, or fire due to short circuit.

Please make sure to follow these instructions.
off and unplug the mains plug when it is not in use, before moving and before cleaning. (
Otherwise it may cause electric shock, or fire due to electrical leakage.
flat heatproof worktop. (Otherwise it may cause burns or injury.)
Beware not to be tripped over or get
caught in the mains lead while in use. (Otherwise it may cause burns or injury.)
and water drips. (It may cause burns.)
Replace the lid packing if it turns white, is
scratched, or split. (
If the appliance is tilted or tipped over, hot water may spill out, which may cause burns. For replacement, consult the place of
purchase or a Panasonic service centre.

the spout. (
Pouring out from another location may result in water splashing, it may cause malfunction or burns.
stand provided. Do not use power source other than the dedicated power base, or use the power base with any other equipment. (It may cause burns, malfunction or fire.)
down fully before cleaning and storing away. (It may cause burns.)
Pay attention to the appliance when it is
in use. (It may cause fire.)
When leaving it, turn the power switch off. ●
Beware when pouring hot water. Pour
slowly, and do not over-tilt the appliance. (It may cause burns.)
Remove the appliance from its stand
before filling or pouring. (It may cause burns.)

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13- amp fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 13-amp and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse. If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. If the fitted moulded plug is unsuitable for the socket outlet in your home, then the fuse should be removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13-amp socket.

How to replace the fuse The location of the fuse differs according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug. Open the fuse cover with a screwdriver and replace the fuse and close or attach the fuse cover.



The illustrations inside mainly show model NC-ZK1.

Mains plug * The shape of plug may be different from illustration.

Clean the appliance by following the steps below for the first time or when you have not used it for a while.
Fill water up to the maximum water level and boil. (P.20)
Pour the water out from the spout. (P.21 After use, pour out any remaining water.)
Lid packing · Spout · Power base connector

How to Use 1 Open the lid and fill with water. 2 Close the lid, put the kettle on the power base and insert the mains plug.


lid firmly as illustrated until you hear a click.

* Wind the mains lead on the bottom of the power base to adjust the length.
Do not put the power base on the mains lead. )

3 Turn on the power switch. (Press “ ”) 4 Remove from the power base and pour.
Max 1.4
Max 1.4
Power indicator lights up. )
During use, the power indicator lights up.
When the water has boiled, the power switch turns off automatically.
The kettle takes around 3 minutes to boil. •
Water temperature 23°C, room temperature 23°C, water to max level
)
After use, pour out any remaining
water.
To stop boiling before the •
water has boiled, turn off the power switch.
Immediately after the water has boiled, •
do not force the kettle to continue heating the water by keep pressing the power switch. (It may cause malfunction.)
* Keep the lid closed when pouring away the water.
Empty-use prevention function When the power switch is on without water, an empty-use prevention function works to automatically turn off the power in order to prevent accidents and malfunction due to overheating. Allow the body to cool sufficiently. Remove the body from the power base and fill the water. Place it on the power base and turn on the power switch again. * If you boil the kettle without water, it may smell strange.
Max

Clean the appliance after every use. Before cleaning, unplug the mains plug, pour away the hot water, and cool the body.
Do not use soap. (This may cause a residual odour.) •
Do not use benzine, thinner, alcohol, bleach, polishing powder, metal brush or nylon •
brush, otherwise the surface will be damaged. Do not wash in a dishwasher. •

If the spout is blocked by scale, hot •
water will pour less easily. After cleaning, always attach it to the •
(Inside) Rub with a soft sponge and rinse. Scale build-up Minerals such as calcium carbonate contained in the water build up in the kettle.
Substance generated by minerals such as calcium carbonate in water. Brown, grey or green colours •
Please remove the scale. Remove it regularly using a suitable scale •
scale remover. After removal, repeat the following steps a few times: fill with water, boil, pour away.
Seal in a plastic bag to prevent insects •

Check the following before contacting the shop or asking for a repair.
Problem Cause How to correct
Insert the mains plug
Is the mains plug
into the household mains socket. (P.20)
Is the body set correctly
Ensure the body is set
on the power base?
correctly.
Is the power switch
Press ‶ ", and turn on the power switch. (P.21)
Is there a piece of metal
or foreign material adhered to the power base connector or body connector?
of metal or foreign material. (P.22)
Once the kettle has boiled, the power switch is
automatically turned off and cannot be turned on for approximately 3 minutes.
Did you try to turn on
Fill with water and turn
The Empty-use prevention function will work to turn off the power switch. )
on the power switch. (P.20)
Is the water level above
Reduce the water down
Hot water may burst out from the spout.
the maximum water level?
to the maximum water level or lower. (P.20)
Since the kettle is designed to sense steam and turn off
Water is dripping from the bottom of the body.
the power switch, the steam can condense and drip from the bottom of the body as water droplets. This is not malfunction.
plugged in? · turned off? · Remove the piece

Problem Cause How to correct
Depending on the amount of chloride contained in the
water supply, there may be a residual chalky smell.
The hot water has a strange smell.
The first time of use, there may be plastic smell, but this
will disappear as you continue to use the kettle.
Shiny white or brown substances are floating in the hot water.
This is scale.
Scale is more likely to be generated when using water with a high mineral content.
Rough milky white substances are adhered to parts inside the body.
Mineral water. •
Clean the kettle with a
scale remover. (P.22)
Water from ionic water •
purifiers.
The sound of water boiling has become very loud.
The sound grows larger
as scale adheres.
Detach and clean with a
Has the mesh filter
Hot water is difficult to pour.
been blocked by foreign matter or scale?
brush etc. (P.22) Clean the kettle with a
scale remover. (P.22)
A clicking sound is heard a short time after use.
This sound is made when an internal heat component
cools down. This is not malfunction.
Did you boil with the lid
open? Close the lid. (P.20)
The kettle is taking a long time to boil.
Scale build up. Clean the kettle with a
scale remover. (P.22)
If the water is very cold, the kettle will take longer time to
boil.

Power supply 220 - 240 V 50 - 60 Hz
Power consumption 2520 - 3000 W
Dimensions (W D H) (approx.)
Body 22.8 cm 15.6 cm 26.1 cm
Body + Power base 22.8 cm 15.6 cm 28.4 cm
Weight (approx.)
Body 1.6 kg 1.6 kg
Body + Power base 2.1 kg 1.9 kg
Rated capacity 1.4 L
Length of the mains lead (approx.) 0.75 m
In certain regions (high altitude, very cold locations), it may not be possible to obtain the
predetermined performance.
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
I possessori del prodotto e il nostro team di solito rispondono entro 24 ore, e la tua domanda sarà utile anche ad altri.
Invia la prima domanda: risponderanno altri possessori o il nostro team.