Manuale d’uso / di manutenzione del prodotto NBN-921 del fabbricante Bosch Appliances
Vai alla pagina of 132
DinionHD 720p IP Camera NBN-921 en Installation and Operation Manual.
.
DinionHD 720p IP Camera Table of Cont ents | en 3 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 T able of Contents 1S a f e t y 8 1.1 Safety precautions 8 1.2 Important safety instructions 9 1.3 Connection in applications 10 1.
4 en | Table of Contents DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 4 Planning 22 4.1 Unpacking 22 4.2 System requirements 23 5 Installation 24 5.1 Lens mounting 24 5.2 Mounting the camera 25 5.
DinionHD 720p IP Camera Table of Cont ents | en 5 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 8.3 Date/Time 42 8.4 Network 43 8.5 Encoder 44 8.6 Audio 44 8.7 Recording 44 8.7.1 Storage medium 44 8.8 System Overview 44 9 Advanced Mode 45 9.
6 en | Table of Contents DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.5.5 Recording Status 78 9.6 Alarm 79 9.6.1 Alarm Connections 79 9.6.2 Video Content Analyses (VCA) 82 9.6.3 VCA configuration- Profiles 83 9.
DinionHD 720p IP Camera Table of Cont ents | en 7 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 10.2 Recordings page 115 10.2.1 Controlling playback 115 11 Troubleshooting 117 11.1 Function test 117 11.2 Resolving problems 118 11.
8 en | Safety DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 1S a f e t y 1.1 Saf ety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product.
DinionHD 720p IP Camera Safety | en 9 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 1.2 Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Follow all warnings on the unit and in the operating instructions be fore operating the unit.
10 en | Safety DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 1.3 Connection in applications Power lines: An outdoor system should not be located in the vicinity of overhead power lin es, electrical lights, or power circuits, or where it may contac t such power lines or circuits.
DinionHD 720p IP Camera Safety | en 11 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 1.4 FCC & ICES compliance FCC & ICES Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules .
12 en | Safety DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 1.5 MicroSD c ards Some microSD cards have been foun d to generate high levels of electromagnetic interference that can disturb the normal behavior of some telecom or me dical equipment.
DinionHD 720p IP Camera Safety | en 13 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 1.7 Bosch notices Video / Recording loss Bosch Security systems reco mmends that local storage on microSD card should only be used for alarm recordin g and Automatic Network Replenis hment (ANR) applications.
14 en | Safety DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 1.8 Copyrights The firmware uses the fonts "Adobe-Helvetica-Bold-R-.
DinionHD 720p IP Camera Introduction | en 15 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 2 Introduction 2.1 F eature s The DinionHD 720p IP Day/Night camera is a high-performance, surveillance color camera.
16 en | Introduction DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems – Password protection to prev ent unauthorized connection or con.
DinionHD 720p IP Camera Syst em Information | en 17 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 3 Syst em Information 3.1 Over view of functions The camera incorporates a network video server. Its primary function is to encode video and control data for transmission over an IP network.
18 en | Syst em Information DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 3.1.4 ONVIF (Ope n Network Video Interface Forum) The camera complies to the ONVIF standard which means that it is easier to install and inte grate into larger systems.
DinionHD 720p IP Camera Syst em Information | en 19 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 3.1.11 Encryption The unit offers a variety of options fo r protection against unauthorized reading. Web browser connections can be protected using HTTPS.
20 en | Syst em Information DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 3.2 Operation with external sy stems The camera can be used.
DinionHD 720p IP Camera Syst em Information | en 21 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 camera, such as controlling relays , remote control of peripheral devices, and remote configuration.
22 en | Planning DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 4 Planning 4.1 Unpacking Unpack carefully and handle the equipment with care.
DinionHD 720p IP Camera Planning | en 23 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 4.2 System r equirements – Computer with Windows XP/Vista operating system, network access, and Microsof t Internet Explorer web browser version 7.
24 en | Installation DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 5 Installation 5.1 Lens mounting Note If a short circuit is detected on the lens connector, the message LENS SHORT CIRCUIT is shown.
DinionHD 720p IP Camera Installation | en 25 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 5.2 Mounting the camera The camera can be mounted eith er from the top or from the bottom (1/4" 20 UNC thread). Figu re 5.
26 en | Installation DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 5.3 Ne twork (and po wer) connect or Figure 5.4 Ne twork connection – Connect the camera to a 10/100 Base-T network.
DinionHD 720p IP Camera Installation | en 27 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 5.4 Po wer connect or Figu re 5.5 Powe r c on n ec ti on Connect power from a 24 VAC or 12 VDC class 2 power supply as follows: – Use AWG16 to 22 stranded wi re or AWG16 to 26 solid wire; cut back 5 mm (0.
28 en | Installation DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 5.5 Alarm and re lay connector Figure 5.6 Alarm and relay connect or pins Alarm Input – AWG 26-16 max.(0. 13-1.5 mm 2 ); cut back 5 mm (0.
DinionHD 720p IP Camera Installation | en 29 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 5.6 Audio connectors Figu re 5.7 Audio connectors Connect audio devices to the Audio In and Audio Out connectors. The unit has full-duplex mono audio.
30 en | Installation DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 5.7 MicroSD c ard Figure 5.8 Insert ing an microSD card 1. Unscrew the microSD card slot cover. 2. With the connection pads to the left, slide the microSD card into the slot until it locks in place.
DinionHD 720p IP Camera Installation | en 31 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 5.8 Data connector Figu re 5.9 Data connector pins The data connector is used to connect the control data coming out of the camera to external devices.
32 en | Installation DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 2. Unlock the back focus locking button. 3. In a web browser, open the Len Wizard in the Camera/ Installer menu and select the wizard mode.
DinionHD 720p IP Camera Installation | en 33 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 5.10 Reset but ton Figu re 5.10 Reset but ton With the power on, use a small po inted object to press and hold the reset button for more than 10 seconds to restore the factory defaults.
34 en | Camera se t-up DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 6 Camera set-up The camera normally provides an optimal picture without the need for further adjustments. Configuration of the camera is carried out via the network using a web browser.
DinionHD 720p IP Camer a Camera se t-up | en 35 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 6.2 Day/Night switching The camera is equipped with a motorized I R filter. The mechanical IR filter can be removed in low-light or IR illuminated applications by so ftware configuration settings.
36 en | Brow ser connection DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 7 Bro wser connection A computer with Microsoft Intern et Explorer can be used to receive live images from the camera, control cameras, and replay stored sequences.
DinionHD 720p IP Camera Brow ser connection | en 37 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 7.2 Establishing the connection The camera must be assigned a valid IP address to operate on your network. The default addr ess pre-set at the factory is 192.
38 en | Brow ser connection DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 7.4 Connection established When a connection is established, the LIVEPAGE is initially displayed. The application titl e bar displays three items: LIVEPAGE , RECORDINGS , SETTINGS .
DinionHD 720p IP Camera Brow ser connection | en 39 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 7.4.3 SETTINGS Click SETTINGS in the application title bar to configure the camera and the application interface.
40 en | Basic Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 8B a s i c M o d e 8.1 Basic Mode menu tree The basic mode configuration menu allows a set of basic camera parameters to be configured.
DinionHD 720p IP Camer a Basic Mode | en 41 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 8.2 Device Access 8.2.1 Camera name Assign a name to assist in identification. This name simplifies the management of multiple devices in more extensive systems.
42 en | Basic Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Confirm password Re-enter the new password to ensure that there are no typing mistakes. The new password is only saved after clicking Set .
DinionHD 720p IP Camer a Basic Mode | en 43 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 8.4 Net wo rk Use the settings on this page to integrate the device into a network. Some changes only take effect after a reboot.
44 en | Basic Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 8.5 Encoder Select a profile for encoding the vide o signal. Pre-programmed profiles are available that give pr iority to different parameters.
DinionHD 720p IP Camer a Advanced Mode | en 45 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9 Advanced Mode 9.1 Advan ced Mode menu tre e The advanced mode configuration menu contains all camera parameters that can be configured.
46 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.2 G eneral 9.2.1 Identification Camera ID Each device should be assigned a unique identifier that can be entered here as an addition al means of identification.
DinionHD 720p IP Camer a Advanced Mode | en 47 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 – live is the lowest authorization le vel. It can only be used to view the live video image and switch between the different live image displays.
48 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.2.3 Date/Tim e Date format Select the required date format. Device date / Device time If there are multiple devices operating in your system or network, it is important to sync hronize their intern al clocks.
DinionHD 720p IP Camer a Advanced Mode | en 49 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 5. Click one of the entries in th e table to make changes. The entry is highlighted. 6. Click Delete to remove the entry from the table.
50 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems If the Custom option is selected, enter values in the X and Y position fields. Time stamping This field sets the position of th e time and date overlay.
DinionHD 720p IP Camer a Advanced Mode | en 51 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.3 W eb Interface 9.3.1 Appearance Adapt the appearance of the web interface and change the website language to meet your requirements.
52 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.3.2 LIVEPAGE Functions In this window, adapt the Livepage f unctions to meet your requirements. Choose from a vari ety of different options for displaying information and controls.
DinionHD 720p IP Camer a Advanced Mode | en 53 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Show event log The event messages are displayed with the date and time in a field next to the video image. Uncheck the box to hide the event log on the Livepage .
54 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems File for system log Enter the path for saving the syst em log here. If necessary, click Browse to find a suitable folder.
DinionHD 720p IP Camer a Advanced Mode | en 55 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4 Camera If the camera is in monochrome mode, all color-related menu items are disabled and cannot be accessed. 9.
56 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 4. Smart BLC Settings optimized to capture details in high contrast and extremely bright-dark conditions. 5. Low noise Enhancements are set to redu ce picture noise.
DinionHD 720p IP Camer a Advanced Mode | en 57 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.2 ALC ALC level Adjust the video output level (-15 to 0 to +15). Select the range within which the ALC will operate.
58 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Actual shutter Displays the actual shutter va lue from the camera to help compare lighting levels and op timum shutter speed during set- up.
DinionHD 720p IP Camer a Advanced Mode | en 59 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.4 Day/night The Day/Night camera is equi pped with a motorized IR (infrared) filter. The IR filter can be removed in low-light or IR- illuminated applications.
60 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems IR contrast There are two modes for IR contrast: – Enhanced : the camera optimizes co ntrast in applications with high IR illumination leve ls.
DinionHD 720p IP Camer a Advanced Mode | en 61 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.5 Enhance Dynamic engine – Off: turns off a ll automatic scene detail and enhancements (only recommended for testing).
62 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.4.6 Color White balance – ATW : Auto tracking white balance allows the camera to continually adjust for optimal color reproduction.
DinionHD 720p IP Camer a Advanced Mode | en 63 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.7 Encoder Profile Adapt the video data transmission to the operating environment (network structure, bandwidth, data structures).
64 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Profile Configuration Profiles can be configured for use with the H.264 settings of encoder streams. Select a profile by clicking the appropriate tab.
DinionHD 720p IP Camer a Advanced Mode | en 65 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 advantageous with low bandwidths. The image rate in ips (images per second) is displayed n ext to the slider. Video resolution Select the desired resolution fo r the video image.
66 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems P-frame quality This setting adjusts the maximum image quality of the P-frames. Auto automatically adjusts to the optimum combination of movement and image definition (focus).
DinionHD 720p IP Camer a Advanced Mode | en 67 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.8 Encoder Streams Select H.264 Settings 1. The codec algorithm for stream 1 is always: – H.264 MP 720p25/30 fixed 2.
68 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Note: The JPEG resolution follows the highest resolution setting of either stream 1 or stre am 2. The M-JPEG frame rate can vary depending on system loading.
DinionHD 720p IP Camer a Advanced Mode | en 69 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.11 Installer Menu Synchronization Select the Synchronization method for the camera: – Line lock to lock to the power supply frequency; – Internal for free running camera operation.
70 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Restore all defaults Click Restore all defaults to restore the fact ory defaults for the camera. A confirmation screen ap pears.
DinionHD 720p IP Camer a Advanced Mode | en 71 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.5 Recording Record the images from the camera to local storage media or to an appropriately configured iSCSI system.
72 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems iSCSI Med ia If an iSCSI system is selected as the storage medium, a connection to the desi red iSCSI system is ne eded to set the configuration parameters.
DinionHD 720p IP Camer a Advanced Mode | en 73 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 available drives. The medi um is then added to the Managed storage media list. Newly added media is indicated in the Status column by the status Not active .
74 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Deactivating Storage Media Deactivate any storage medium from the Managed storage media list. It is then no lo nger used for recordings.
DinionHD 720p IP Camer a Advanced Mode | en 75 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.5.2 Recording Profiles Define up to ten different record ing profiles here, then assign these to individual days or times of day on the Recording Scheduler page.
76 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Alarm recording Select the Pre-alarm t ime from the list box. Select the Post-alarm time from the list box. Select the Alarm stream to use for alarm recording.
DinionHD 720p IP Camer a Advanced Mode | en 77 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.5.4 Recording Scheduler The recording scheduler allows you to link the created recording profiles to the days and times at which the camera's images are to be record ed in the event of an alarm.
78 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Profile name s To change the names of the recording profiles listed in the Time periods bo x: 1. Click a pro file.
DinionHD 720p IP Camer a Advanced Mode | en 79 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6 Alarm 9.6.1 Alarm Connections Select the response of the camera when an alarm occurs. In the event of an alarm, the device can automatically connect to a pre-defined IP address.
80 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems system such as the Bosch Video Client or the Bosch Video Management System. The camera connects to all remote stations protected by the same general password.
DinionHD 720p IP Camer a Advanced Mode | en 81 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 split image is set for this output on the receiver, select the decoder from Decoder in the receiver that is to be used to display the alarm image.
82 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.6.2 Video Content Analyses (VCA) The camera has integrated VCA which can detect and analyze changes in the signal using image processing algorith ms.
DinionHD 720p IP Camer a Advanced Mode | en 83 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6.3 VCA configuration- Profiles Configure two profiles with diff erent VCA configuration s. Save profiles on your computer's hard drive and load saved profiles from there.
84 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Analysis type Select the required analysis algorithm. By default, only Motion+ is available — this offers a motion detector and essential recognition of tampering.
DinionHD 720p IP Camer a Advanced Mode | en 85 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 environmental conditions to which the camera is subject. The sensor reacts to variations in th e brightness of the video image.
86 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Tamper detection Detect tampering of cameras and video cables by means of various options. Run a series of tests at different times of the day and night to ensure that the video sensor is operating as intended.
DinionHD 720p IP Camer a Advanced Mode | en 87 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Scene too bright Activate this function if tamperi ng associated with exposure to extreme light (for instance, s hining a flashlight directly on the objective) should trigger an al arm.
88 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems would not trigger an alarm, then an alarm is triggered immediately to indicate the inadequate reference image.
DinionHD 720p IP Camer a Advanced Mode | en 89 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6.4 VCA configuration - Scheduled A scheduled configuration allows you to link a VCA profile with the days and times at which the video content analysis is to be active.
90 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 3. Click OK . The item is deleted from the table and the window closes. 4. The process must be repeated for deleting additional days.
DinionHD 720p IP Camer a Advanced Mode | en 91 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6.5 VCA configuratio n - Event triggered This configuration allows you to stipulate that the video content analysis is only to be activated when triggered by an event.
92 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.6.6 Audio A larm Create alarms based on audio signals. Configure signal strengths and frequency ranges so that false alarms, for example, machine nois e or ba ckground noise, are avoided.
DinionHD 720p IP Camer a Advanced Mode | en 93 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6.7 Alarm E-Mail As an alternative to automatic connecting, alarm states can also be documented by e-mail. This makes it possible to notify a recipient who does not have a video receiver.
94 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Destination address Enter the e-mail address for alarm e-mails here. The maximum address length is 49 characters. Sender name Enter a unique name for the e-mail sen der, for example, the location of the device.
DinionHD 720p IP Camer a Advanced Mode | en 95 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6.8 Alarm Task Editor Editing scripts on this page ov erwrites all settings and entries on the other alarm pages.
96 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.7 Interfaces 9.7.1 Alarm input Configure the alarm triggers for the camera. Select N.C. (Normally Closed) if the al arm is to be triggered by closing the contact.
DinionHD 720p IP Camer a Advanced Mode | en 97 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Select Select External device or Motion+/IVA to trigger the relay. Relay name The relay can be assigned a name he re.
98 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.8 Ne tw ork 9.8.1 Network Access The settings on this page are used to integrate the device into a network. Some changes only take effect after a reboot.
DinionHD 720p IP Camer a Advanced Mode | en 99 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Subnet mask Enter the appropriate subnet mask for the set IP address. Gateway address For the device to estab lish a connection to a remote location in a different subnet, enter the IP address of th e gateway here.
100 en | Advanced Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems deactivates all unencrypted conne ctions allowing connections on the HTTPS port only. Configure and activate encryption for media data (video, audio, metadata) on the Encryption page.
DinionHD 720p IP Camer a Advanced Mode | en 101 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 host name for the device on that site. Note: Information about the service , registration process and available host names can be found at DynDNS.
102 en | Advanced Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.8.2 Advanc ed The settings on this page are used to set advanced settings the network. Some changes only take effect after a reboot.
DinionHD 720p IP Camer a Advanced Mode | en 103 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 RTSP port If necessary, select a different port from the list for the exchange of the RTSP data. The standard RTSP port is 554.
104 en | Advanced Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems A special IP address (class D addr ess) must be configured f or multicast operation in a mult icast-enabled network.
DinionHD 720p IP Camer a Advanced Mode | en 105 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.8.4 FTP Posting Save individual JPEG images on an FTP server at specific intervals. If required, retrieve these images at a later date to reconstruct alarm events.
106 en | Advanced Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.8.5 Encryp tion If an encryption license is installed, this submenu gives access to the encryption parameters.
DinionHD 720p IP Camer a Advanced Mode | en 107 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.9 Ser vice 9.9.1 Maintenance Firmware The camera functions and para meters can be updated by uploading new firmware.
108 en | Advanced Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems The new firmware is unpacked and the Flash memory is reprogrammed. The time remain ing is shown by the message going to reset Reconnecting in .
DinionHD 720p IP Camer a Advanced Mode | en 109 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Once all files have been successf ully uploaded, the device must be rebooted. In the address field of the browser, enter /reset after the camera's IP address, for example: 192.
110 en | Operation via the brow ser DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 10 Operation via the brow ser 10.1 Liv epage After the connection is established, the Livepage is initially displayed.
DinionHD 720p IP Camera Operation via the bro wser | en 111 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 10.1.2 Image selection View the image on a full screen. – Click a tab below the video image to swi tch between the different display streams of the camera image.
112 en | Operation via the brow ser DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 10.1.3 View Control If the data port is set-up to cont rol a PTZ device, a View Control tab is shown and activated.
DinionHD 720p IP Camera Operation via the bro wser | en 113 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 end of alarms are shown in the Ev ent Log field. These messages can be saved automatically in a file.To delete the entries, click the icon in the top right-hand corner of the relevant field.
114 en | Operation via the brow ser DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 10.1.9 Audio communication Audio can be sent and received via the Livep age if the active monitor and the remote station of the camera support audio.
DinionHD 720p IP Camera Operation via the bro wser | en 115 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 10.2 Recordings page Click Recordings to access the Recordings page from the Livepage or Settings page.
116 en | Operation via the brow ser DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems – If required, drag the green ar row to the point in time at which the playback should begin. – Red bars indicate the points in time where alarms were triggered.
DinionHD 720p IP Camera T roubleshooting | en 117 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 11 T roubleshooting 11.1 F unction te st The camera offers a variety of co n figuration options. Therefore, check that it works properly afte r installation and configuration.
118 en | T roubleshooting DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 11.2 Resolving problems The following table is intended to help identify the causes of malfunctions and correc t them where possible .
DinionHD 720p IP Camera T roubleshooting | en 119 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 No audio transmission to remote station. Hardware fault. Check that all connected audio units are operating correctly.
120 en | T roubleshooting DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 11.3 Customer ser vice If a fault cannot be resolved, pl ease contact your supplier or system integrator, or go directly to Bosch Security Systems Customer Service.
DinionHD 720p IP Camera Maintenance | en 121 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 12 Maintenance 12.1 T esting the ne twork connection The ping command can be used to check the connection between two IP addresses.
122 en | T echnical Data DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 13 T echnical Data 13.
DinionHD 720p IP Camer a T echnical Data | en 123 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Controls Via web browser or Configuration Manager Control feedback Actual shutter, Actual gain LAN interface STP, Ethernet 10/100 Base-T, auto-sensing, half/full duplex, RJ-45 Video encoding protocols H.
124 en | T echnical Data DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 13.1.1 Accessories Contact your Bosch representati ve for the latest available accessories. Dimensions (H x W L) without lens 58 x 66 x 122 mm (2.
DinionHD 720p IP Camera Glossar y | en 125 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Glossar y 0…9 10/100Base-TIEEE-802.3 specificati on for 10 or 100 Mbps Ethernet. 802.1x The IEEE 802.1x standard provides a general method for authentication and authorization in IEEE-802 networks.
126 en | Glossar y DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems F FTP File Transfer Protocol: Used to transfe r files between computers on a network, such as the Internet. Full duplex Simultaneous data transmission in both directions (sending and receiving).
DinionHD 720p IP Camera Glossar y | en 127 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 IEEE Institute of Electrical and Electronics Engineers: T he world's leading professional associati on for the advancement of technology.
128 en | Glossar y DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems M MAC Media Access Control: A quas i-unique identifier attached to most network adapters (NICs). It is a number that acts like a name for a particular network adapter.
DinionHD 720p IP Camera Glossar y | en 12 9 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 R RADIUS serverRemote Authentication Di al-In User Service: a client/server protocol for the authentication, authorization and accounting of users with dial-up connections on a computer network.
130 en | Glossar y DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems TLS Transport Layer Security: TLS 1.0 and 1.1 and the standard advanced developments of SSL 3.0 ( see SSL ). TTL Time-To-Live: life cycle of a data packet in station transfers.
.
Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2011.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Bosch Appliances NBN-921 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Bosch Appliances NBN-921 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Bosch Appliances NBN-921 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Bosch Appliances NBN-921 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Bosch Appliances NBN-921, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Bosch Appliances NBN-921.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Bosch Appliances NBN-921. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Bosch Appliances NBN-921 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.