Manuale d’uso / di manutenzione del prodotto F.01U.252.722 del fabbricante Bosch Appliances
Vai alla pagina of 36
NurseCall Relay Unit F.01U.252.722 | V1 | 2011.12 en User Manual.
.
NurseCall Relay Unit Table of Cont ents | en 3 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 T able of Contents 1 Safety instructions 5 1.1 Importance of safety instructions 5 1.2 Disregarding safety rules 5 1.3 Environmental conditions 5 1.
4 en | Table of Cont ents NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 4.3 Special settings 21 4.3.1 Displaying the firmware version 21 4.3.2 Resetting all the parameters and buffers 21 4.3.3 Assistance and fire priority 21 4.
NurseCall Relay Unit Safety instructions | en 5 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 1 Safety instructions 1.1 Impor tance of safety instructions Each safety and protection instruction in this manual must be adhered to in order to avoid personnel injurie s, property dama ges or environmental pollution.
6 en | Safety instr uctions NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 1.4.1 Observation and information In case of defective operation or any other technical incident for which no remedy is described in this manual, please contac t immediately your local representative.
NurseCall Relay Unit Descrip tion | en 7 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 2 Description 2.1 G eneral description 2.1.1 Top view 1. Loudspeaker. See Section 2.2.1 Loudspeaker, page 10 . 2. Display. See Section 2.2.2 Display, page 10 .
8 en | Description NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 2.1.2 Bottom view 1. Identification label. 2. Cable channels. 3. Wall mounting holes (distance between holes, 157 mm). See Section 3.2.3 Wall installation, page 14 for a detailed description.
NurseCall Relay Unit Descrip tion | en 9 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 2.1.3 Front view 1. LED Indicator 2.1.4 Relay Unit rear view 1. RS-485 connector. See Section A.5.4 RS-485 socket (unit rear), page 34 for wiring.
10 en | Description NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 2.2 Detailed description 2.2.1 Loudspeaker When one of the following alarms or messages is received by the NurseCall Relay Unit, the internal loudspeaker is acti vated until acknowledgement.
NurseCall Relay Unit Descrip tion | en 11 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 Keys Function Access to the printer/display setup (Relay Plus Unit only) See Section 4.4 Printer/display se tup on the Relay Plus Unit, Page 22 .
12 en | Description NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 2.2.4 RS-485 interface One NurseCall Main Unit and up to 32 NurseC all Relay Units can be connected by a RS-485 bus. The bus must be connected to pins 2 and 5 of the RS-485 socke t.
NurseCall Relay Unit Installation | en 13 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 3 Installation 3.1 Unpacking The NurseCall Relay Unit is care fully packed fo r transportation. The components contained in the box are prot ected, but should be handled with care.
14 en | Installation NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 3.2 Installation 3.2.1 Generalities Install the NurseCall Relay Unit in a dry place, away from any source of heat. Tools required: – Torx T20 screwdriver.
NurseCall Relay Unit Installation | en 15 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 3.2.5 Connecting to the mains The NurseCall Relay U nit is powered b y an adaptor (230/10 VAC or 115/10 VAC). 1. Plug the power adaptor into a power outlet placed near the unit.
16 en | Installation NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 3.2.6 Setting the jumpers on the commun ication board on the Relay Plus Unit 1. Disassemble the unit; see Section 6.5.1 Disassembl ing the unit, page 29 .
NurseCall Relay Unit Installation | en 17 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 3.2.7 Connecting the RS-485 One NurseCall Main Unit and up to 32 NurseCa ll Relay Units can be connected to an RS-485 bus. Please contact a specialist for a correct installation.
18 en | Installation NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 3.2.8 Connecting the RS-232 to the Relay Plus U nit Connect the printer or display device to the 9-pole SUB-D connector (1) at the re ar part of the housing of the Relay Plus Unit.
NurseCall Relay Unit Programming | en 19 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 4 Programming 4.1 G eneralities 4.1.1 Using the keyboard Open the cover carefully and use the keyboard. To access the special settings progra mming, press three times quickly.
20 en | Programming NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 4.2 First use 4.2.1 List of original factory settings * Locating mode and identification number are set at first use. To chan ge a value, reset the unit.
NurseCall Relay Unit Programming | en 21 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 Manual selection of the NurseCall Main Unit 5.a. Scroll with and to set manually the identification number. Confirm with or the Gree n button. The Re lay Unit signalizes that it is not connected to the RS-485 bus.
22 en | Programming NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 4.3.4 Assistance and fire non priority This command sets the assistance call and the fire alarm as non-priority calls. This means that the last alarm is displayed, whateve r its type.
NurseCall Relay Unit Programming | en 23 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 4.4.2 Selection "None" if you have selected None , press to confirm. In this case, there will be no printer/di splay output. This is the default setting.
24 en | Programming NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems c. Choose 0 to 9 characters for the criterion, followed by 0 to 9 spaces. Default values are 2 characters + 1 space. 7. Repeat the operation for a.
NurseCall Relay Unit Operatio n | en 25 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 5 Operation 5.1 Adjusting the loudspeake r volume When the NurseCall Relay Unit is in standby mode: Press to increase the volume. Press to decrease the volume.
26 en | Operation NurseCall Rela y Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 5.2.1 Switching between alarm and event buffers indication The alarm buffer is indicated by default. If you are in the event buffer, the unit changes automatically to the alarm buffer after 1 minute without activity.
NurseCall Relay Unit Operatio n | en 27 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 Third information block 8. position of the last passed be ac on, visible in all display modes. If no beacon is registered or if the alarm is sent outside of the range of a beacon, the POS 000 will be displayed.
28 en | Maintenance NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 6 Maintenance 6.1 Checking the sy stem Check the correct function of your NurseCall system.
NurseCall Relay Unit Maint enance | en 29 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 6.4 Cleaning Avoid using cleaning products or detergents. Wipe off your NurseCall Relay Unit occasionally with a dry cloth. 6.5 Par ts replacement 6.
30 en | Maintenance NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 6.5.2 Backup battery repl acing Important Safety Instructions The battery should charge for 24 hours before using the NurseCall Relay Unit for the first time, after replacing the battery or after a long power shortage.
NurseCall Relay Unit Disposal | en 31 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 7 Disposal The NurseCall Relay Unit is marked wi th a crossed-out wastebasket symbol.
32 en | NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems A Appendix A .1 Electrical specifications A .2 Dimensions and we ight A .3 Environmental conditions Voltage 230 or 115/10VAC Current 280 mA Frequency 50/60 Hz Power 2.
NurseCall Relay Unit | en 33 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 A .4 List of crit eria Criterion Number Alarm (A) or Event (E) Comment ERROR 00 A System malfunction, e.g. component defective PERSONNEL A 01 E Coded key acti ve (N46) LOW BATTERY 02 A Battery at low level (Transmitter) ACK.
34 en | NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems A .5 Connectors A.5.1 LINE socket (u nit bottom) A.5.2 Power socket (unit bottom) A.5.3 RS-232 socket (Relay Plus Unit rear) A.5.4 RS-485 socket (unit rear) LINE socket Wiring 1.
.
Bosch Security Systems Robert-Bosch-Ring 5 85630 Grasbrunn Germany www.boschsecurity.com © Bosch Security Systems, 2011.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Bosch Appliances F.01U.252.722 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Bosch Appliances F.01U.252.722 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Bosch Appliances F.01U.252.722 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Bosch Appliances F.01U.252.722 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Bosch Appliances F.01U.252.722, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Bosch Appliances F.01U.252.722.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Bosch Appliances F.01U.252.722. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Bosch Appliances F.01U.252.722 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.