Manuale d’uso / di manutenzione del prodotto P-2024 del fabbricante ZyXEL Communications
Vai alla pagina of 17
Copyright © 2007. All rights reserved. P-2024 V oIP Analog T elephone Adaptor Quick S tart Guide V ersion 3.60 7/2007 Edition 1 DEFAULT LOGIN IP Address http://1 92 .
P-2024 Quick Start G uide 1 Overview Use your P-2024 to make V oice over IP calls using analog ph ones. Connect analog telephones to the P-2024 , and map each phone port to one or more of the configurable V oIP (SIP) accounts.
P-2024 Quick Start G uide 2 The following table li sts some important information about the P-2024. 1 Inst alling the Hardware Either: • Attach the included self-adhesive ru bbe r feet (for free-sta.
P-2024 Quick Start G uide 3 1.2 Rack-Mounted Inst allation 1 Align one bracket with the holes on one side o f the P-2024 and secure it with bracket screws smaller than the rack-mo unting screws. Attach the ot her bracket to the other side of the P-2024.
P-2024 Quick Start G uide 4 2 Making Hardware Connections This section describes how to connect the P-2024 to your network and prepare it for configuration. T ake the following steps to connect the P-2024 to your network: 1 Connect the T elco-50 (RJ-21) cable to the PHONE connector and tigh ten the retaining screw .
P-2024 Quick Start G uide 5 The LAN and WA N LEDs turn on w hen they are conne cted , and blink when there is traffic. A green LED indicates that the connection is at 10Mbps, and a yellow LED indicates that the connection is at 100Mbps. V If the PWR/ST A TUS LED does not turn on, check the P-2024 ’s power connection.
P-2024 Quick Start G uide 6 Y ou can either connect telephon es directly to the P-2024 using the RJ-1 1 connectors on the T elco-50 cable, or use an MDF (Main Distribution F rame), as shown in the following figure.
P-2024 Quick Start G uide 7 3 Accessing the Web Configurator 3.1 Setting Y our Comp uter ’ s IP Address " Make a note of your computer ’s IP settings before you change them. In order to config ure your P- 2024 throug h the LAN port, you need to set your computer ’s IP address to be in the same subnet as the P-2024.
P-2024 Quick Start G uide 8 V If you do not see this screen, check you r connections and ensure that one of the P-2024’ s LAN LEDs is on. Check that your computer is using a st atic IP address in the range 192.168.5.2 ~ 19 2.168.5.254 with a subnet mask of 255.
P-2024 Quick Start G uide 9 2 The Internet Connection screen appears. Select the Encap sulation you were given to u se for Internet access. 3 If you select PPPoE (Point-to-Point Protocol over Ethernet.
P-2024 Quick Start G uide 10 5 Setting Up A SIP Account 6 Click the Stat us icon in the navigation panel. The Stat u s screen displ ays. Check that the W AN In formation settings in the Device Information section are correct.
P-2024 Quick Start G uide 11 2 The SIP Settings screen displays. Select the SIP Account you want to set up (this example uses the SIP 1 account). Ensure that Active SIP Account is selected. Enter the account information provided by your ITSP in the relevant fields.
P-2024 Quick Start G uide 12 V If the SIP account does not register ( Not Register displays in the Registration field and/or the analog phone port 1 LED does not turn on ) check your W AN settings and re-enter the SIP account information. If this does not help, see T roubleshooting in your User ’s Guide or cont act your SIP service provider .
P-2024 Quick Start G uide 13 6 Setting Up a T elephone and Making a Call T ake the following steps to configure a spec ific ana log telephone to use the SIP account you set up for incoming and outgoing calls. 6.1 Setting Up a T elephone 1 Connect an analog telephone to the phone po rt you want to use via the T elco-50 cable.
P-2024 Quick Start G uide 14 If you set a phone port to use more than one SIP account for outgoing calls - for example, if you set Phon e10 to use SIP9 , SIP14 and SIP15 - the following things happen when you make a call for the first time: • The P-2024 tries to use the lo west-numbered SIP account ( SIP9 in th is example).
P-2024 Quick Start G uide 15 6.2 Making a Call V If you experience dif ficulty using an analog phone when there is another device (such as an MDF) connected between the phon e and the P-2024, try connecting the phone directly to the T elco-50 cable jack.
P-2024 Quick Start G uide 16.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il ZyXEL Communications P-2024 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del ZyXEL Communications P-2024 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso ZyXEL Communications P-2024 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul ZyXEL Communications P-2024 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il ZyXEL Communications P-2024, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del ZyXEL Communications P-2024.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il ZyXEL Communications P-2024. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo ZyXEL Communications P-2024 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
