Manuale d’uso / di manutenzione del prodotto BiPAC 7100SG del fabbricante Billion
Vai alla pagina of 61
BIPAC 7100SG 802.11g ADSL Modem/Router with Single Ethernet Port User Manual.
.
i Table of Contents Chapter 1 .................................................................................................... 1 I NTRODUCTION ................................................................................................... 1 1.
Billion BIPAC 7100SG ADSL Modem/Router ii 3.4.3.5 Firewall ............................................................................................................................... .... 34 3.4.3.5.1 Packet Filter ................................
1 Chapter 1 Introduction 1.1 An Overview of BIPAC 7100SG BIPAC 7100SG ADSL Modem/Router provides a high -speed Ethernet po rt for high-speed Internet browsing. It can support d ownstream transmission rate s of up to 8Mbps and upstream transmission rates of up to 1024Kbps.
Billion BIPAC 7100SG ADSL Modem/Router 2 1.2 Package Contents 1. Billion BIPAC 7100SG ADSL Modem/Router 2. One CD-ROM containing the driver and online ma nual 3. One Quick Start Guide 4. One RJ-11 ADSL/telephone cable 5. One CAT-5 straight LAN cable 6.
Chapter 1 Introduction 3 example, user can assign a PC in LAN actin g as WEB server inside and expose it to the outsid e network. Outside user can brow se inside web server directly while it is prote cted by NAT. A DMZ host setting is also provided to a local comput er exposed to the outside networ k, Internet.
4 Chapter 2 Using Billion ADSL Modem/Router 2.1 Cautions for Using Billion ADSL Modem/Router Do not place the router under high humidity and high temperat ure. Do not use the same power source for the dev i ce with other equipment. Do not open or repair the case y ourself.
Chapter 2 Using the ADSL Modem/Router 5 2.3 The Rear Ports Port Meaning 1 Power Switch Power ON/OFF switch 2 PWR Connect the supplied power adapter to this ja ck. 3 RESET After the device is powered on, press it to reset the device or restore to factory default settings.
Billion BIPAC 7100SG ADSL Modem/Router 6 verify that the PWR, SYS, LAN LNK and ADSL SYN LEDs are lit. If they are not, verify that you are using the proper cables. So long as the cables are connected and the LEDs are lit normally, follow section “3.
7 Chapter 3 Configuration BIPAC 7100SG can be configured with your Web browser. The web b rowser is included as a standa rd application in following op eration systems, UNIX, Linux, Mac OS , Windows 95/98/NT/2000/Me/XP, etc. The product provides a very easy and us er-friendly in terface for co nfiguration.
Billion BIPAC 7100SG ADSL Modem/Router 8 3. In the Local Area Connection Status window, c lick Properties . 4. Select Internet Protocol (TCP/IP) and click Properties . 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons.
Chapter 3 Configuration 9 Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel . In the Control Panel, double- click on Net work and Dial-up Connections . 2. Double-click Local Area Connection . 3. In the Local Area Connection Status window, c lick Properties .
Billion BIPAC 7100SG ADSL Modem/Router 10 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. Configuring PC in Windows 95/98/ME 1. Go to Start / Settings / Control Panel .
Chapter 3 Configuration 11 4. Select the IP Address tab. In this page, click the Obtain an IP address automatically radio button. 5. Then select the DNS Configuration tab. 6. Select the Disable DNS radio button and click OK to finish the configuration.
Billion BIPAC 7100SG ADSL Modem/Router 12 Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel . In the Control Panel, double- click on Net work and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties . 3. Select the Obtain an IP address from a DHCP server radio button and click OK .
Chapter 3 Configuration 13 User Name Password Administrator Level admin password User Level user password 2. Device IP Net work settings in LAN site IP Address: 192.168.1.254 Subnet Mask: 255.255.255. 0 3. ISP setting in WAN site Virtual Circuit 0: 1483 Routed IP LLC 4.
Billion BIPAC 7100SG ADSL Modem/Router 14 PPPoE VPI/VCI, VC-based/LLC-based multiple xing, Use rname, Password, Service Name, and Domain Name System (DNS ) IP address (it can be automatically assigned by your ISP when you connect or be set manually).
Chapter 3 Configuration 15 If you want to configure the device wi th administrator level, type admin in the u sername field and password in the password field. Then, click “OK” to log in. You can modify these passwords for security and management purpose .
Billion BIPAC 7100SG ADSL Modem/Router 16 3.4.1.1 Status – ADSL Status Displays the status of your ADSL conn ection. It will refresh every two seconds.
Chapter 3 Configuration 17 3.4.1.1.1 ADSL Status – WAN Status 3.4.1.1.2 ADSL Status – ATM Status.
Billion BIPAC 7100SG ADSL Modem/Router 18 3.4.1.2 Status – LAN Status Displays the status of your Local Area Network (LAN) connection..
Chapter 3 Configuration 19 3.4.1.2.1 LAN Status – TCP Status 3.4.1.3 Status- PPP Status Displays the status of your PPP connect ion. It will refresh every ten seconds.
Billion BIPAC 7100SG ADSL Modem/Router 20 3.4.1.4 Status- VPN Connect Status Through this page you can che ck connection stat us of Virtual Private Network (V PN). Once you setup your VPN tunnel the informat ion of conne ction will show on this page. 3.
Chapter 3 Configuration 21 3.4.1.6 Routing Table Display the current routing paths of BIPAC 7100SG..
Billion BIPAC 7100SG ADSL Modem/Router 22 3.4.1.7 System Log Display the system logs cumulated t ill the present time. You can trace t he historical information through this function.
Chapter 3 Configuration 23 3.4.2 Quick Start If you use this device to access the Internet through the ISP, this w eb page is enough for you to configure this router and access the Internet without a problem.
Billion BIPAC 7100SG ADSL Modem/Router 24 3.4.3 Configuration When you click this item, you get following su b-item s to configure BIPAC 7100SG. LAN, WAN, Firewall, System, VPN, Virtual Server, Advanced and Help 3.4.3.1 WAN The screens below contain settings fo r the WAN interface toward Internet.
Chapter 3 Configuration 25 Virtual Circuit Virtual Circuit: Enable/Disable the settings of this VC. Bridge: If you set this device to be bridge mode, select Enable; if not, please select Di sabl e.
Billion BIPAC 7100SG ADSL Modem/Router 26 Encapsulation: There are eleven ways ─ PPPoE VC-Mux, PPPoE LLC, PPPoE None, PPPoA VC-Mux, PPPoA LLC, 1483 Bridged IP VC-Mux, 1483 Bridged IP LLC, 1483 Rout ed IP VC-M ux, 1483 Routed IP LLC, Classical IP over ATM, Native ATM ─ for the device to have a public IP address and then to access Internet.
Chapter 3 Configuration 27 MTU: Maximum Transmission Unit indi cates the network stac k of any packet is larger than this value will be fragmented before the transmissi on. During the P PP negotiation, the peer of the PPP connection will indicate its MRU and will be accepted.
Billion BIPAC 7100SG ADSL Modem/Router 28 DHCP Server DHCP Server: Check DHCP Serve r to enable the router to distribute IP Addres se s, subnet mask and DNS setting to computers.
Chapter 3 Configuration 29 SSID : Enter the unique ID given to the Acce ss Point (AP) built in the wireless broa dband firewall gateway. To connect to this device, your wireless clie nts must have the same SSID as that of this device. Channel : Select the ID of channel you woul d like to use.
Billion BIPAC 7100SG ADSL Modem/Router 30 3.4.3.4 System There are five items unde r the Syste m section: Password, Time Zone, Upgrade, Factory Setting and Restart. 3.4.3.4.1 Password In factory setting, the default password is password , and that for user is also password.
Chapter 3 Configuration 31 3.4.3.4.2 Time Zone BIPAC 7100SG does not have a real time clock on boa rd; instead, it uses the simple network time protocol (SNTP) to get the current time from the S NTP server in outside network. Please choose your local time zone and click Submit.
Billion BIPAC 7100SG ADSL Modem/Router 32 Automatically adjust clock for daylight saving changes: It is optional for different time zo ne area. SNTP Server IP Address: Specify the IP address if you want to use your familiar SNTP server.
Chapter 3 Configuration 33 To upgrade the firmware of BIPAC 7100SG, you shoul d download or co py the firmware to your local environment first. Press the “Browse…” button to specify the path of the firmware file. Then, click “Upgrade” to start upgra ding.
Billion BIPAC 7100SG ADSL Modem/Router 34 3.4.3.4.5 Restart In case the router stops responding correctly or in some other way stops functioning, you can perform the restart. Your setting won’t be changed. Performi ng th e restart, click on the Submit button.
Chapter 3 Configuration 35 Add: Click this button to add a new packet filter rule. After click, ne xt figure will appear. Edit: Check the Rule No. you want to edit. Then, click the “Edit” button. Delete: Check the Rule No . you want to delet e. The n, click the “Del ete” button.
Billion BIPAC 7100SG ADSL Modem/Router 36 Active: Choose “Ye s” to enable the rule, or choose “No” to disabl e the rule. Packet Type: Specify the packet type (TCP, UDP, ICMP or any) that the rule will be applied to. Select TCP if you want to scope for the conn ection-based application service o n the remote server using the port number.
Chapter 3 Configuration 37 Src MAC: Enter the source MAC addre ss. Dest MAC: Enter the destination MAC address. Typ e: Enter the Ethernet type. Block For ward: Check Block if you want to block requests fr om the source MAC address se ndin g to the destination MAC address.
Billion BIPAC 7100SG ADSL Modem/Router 38 3.4.3.5.4 Block WAN Request Check “Enable” if you want to exclude outside PING request from reaching on this router.
Chapter 3 Configuration 39 3.4.3.5.5 URL Blocking URL blocking function enables yo u to avoid your LA N PCs from accessing some URLs. You must check the “Enable” radio button to make the following figure appear for fu rther configu ration.
Billion BIPAC 7100SG ADSL Modem/Router 40 3.4.3.6 VPN (Virtual Private Networks) we will introduce the VPN settings to establish a se cure communication path with remote site based on IPsec. Please check “Enable” and click “Add” button . Then you will see IKE Setup page as below figure.
Chapter 3 Configuration 41 Remote Gate way IP or Host Name: the public IP address or host name of remote VPN device. For example, it may be jet.dyndns.org (If remote IP is not fixed.) or 210.243.142.29. Remote Subnet: The IP subnet of remote LAN environment, net work ID.
Billion BIPAC 7100SG ADSL Modem/Router 42 3.4.3.7 Virtual Server Being a natural Internet firewall, the ADSL Router pr otects your netw ork from being ac cessed by outs ide users. When it needs to allow out side users to access internal se rvers, e.g.
Chapter 3 Configuration 43 Public Port (from) & Port (To): Enter the publi c port number & range you want to configure. Port Type: Select TC P if you want to scope for the connectio n-ba sed application service on the remote server using the port num ber.
Billion BIPAC 7100SG ADSL Modem/Router 44 3.4.3.8.2 DNS A Domain Name System (DNS) co ntains a mappi ng table for domain name and IP addre ss. In the Internet, every host has a uniqu e and friendly name such as www.yahoo.com and IP address. The IP address is so hard to rem ember that you may just enter the frie ndly name www.
Chapter 3 Configuration 45 3.4.3.8.3 Dynamic DNS With Dynamic DNS service, a domain name can be trans lated into a dynami c IP address, which is often issued by ISP for dial-up se rvice. A local server, su ch as Web server, Email server o r FTP server, can then be easily accessed without kno wing the changing IP address.
Billion BIPAC 7100SG ADSL Modem/Router 46 Check the “Enable” button to access the Dynamic DNS service. You may si gn up Dynami c DNS service at http://www.dyndns.org and there you can al so register domain names. Host: Enter one domain na me you have registered.
Chapter 3 Configuration 47 Session Name: Enter the desired se ssi on name. User’s IP: Allows the user to assign the IP address to map the co rresponding NAT/NAPT sessions. Session Name status will be displayed at the middle of this page to show t he corresponding Session Name with its IP address.
Billion BIPAC 7100SG ADSL Modem/Router 48 3.4.3.8.5 RIP RIP: Default is Disabled . Border Gateway: Default is Enabled . Supply Interval seconds: The default value is 30 second s. Expire Timeout seconds: The def ault value is 1 80 seconds. Garbage Timeout seconds: The default value is 120 second s.
Chapter 3 Configuration 49 3.4.3.8.6 SNMP Simple Network Management Protocol (SNMP) is an optional feat ure that may or may not be supported by your ADSL Bridge/Router.
Billion BIPAC 7100SG ADSL Modem/Router 50 SNMP is an application layer protocol that is used for managing networks. SNMP is an optional feature that may or may not be in the specific firmware t hat you are working with.
Chapter 3 Configuration 51 Add: Click this button to add a new static routing. When you click thi s button, the next figure appea rs. Delete: Check the item you want to delete. Then, cli ck the “Delete” button. Destination / Subnet Mask / Ga teway Address: Fill in these fields require d by this Static Routing function.
Billion BIPAC 7100SG ADSL Modem/Router 52 3.4.3.8.8 MISC Configuration HTTP server access: Default at Res tricted . HTTP server port: Default at 80 . FTP server: Default at Enabled . TFTP server: Default at Disabled . DMZ: Regarding the DMZ Host, it is a local computer exposed to the Internet.
Chapter 3 Configuration 53 3.4.3.8.9 Diagnostic Test As soon as you enter the test pro gram, all tests will run automatically to diagnose the co nnection status of the device. Checking LAN Connectio n Testing Ethernet LAN connec tion This test passes if the Ethernet LA N interface is working p ro perly.
Billion BIPAC 7100SG ADSL Modem/Router 54 This test sends ATM OAM F5 Segm ent loop back re quest cells to the central office equipments through your DSL connection. This test will pass if response cell is received. Si nce your service pr ovider might not support this test, your DSL modem coul d still work even if this test fails.
3.4.4 Save Config Click the Submit button to write settings to flash. Then, the system will reboot for changes to take effe ct. 55.
56 Chapter 4 Troubleshooting If the ADSL Router is not functioning properly, you can refer first to this chapter for simple troubleshooting before contacting your service provider. This could save your time and effort but if the symptoms persist, then consult your service provider.
57 APPENDIX Product Support and Contact Information Most problems can be solved by referring to the Troubleshoo ting section in the User’s Manu al . If you cannot resolve the problem with the Troubles hooting chapter, please contact the dealer where you purchased this product.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Billion BiPAC 7100SG è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Billion BiPAC 7100SG - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Billion BiPAC 7100SG imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Billion BiPAC 7100SG ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Billion BiPAC 7100SG, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Billion BiPAC 7100SG.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Billion BiPAC 7100SG. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Billion BiPAC 7100SG insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
