Manuale d’uso / di manutenzione del prodotto WD83390 del fabbricante Yamaha
Vai alla pagina of 388
Owner’ s Manual Owner’ s Manual Keep This Manual For Future Reference. Keep This Manual For Future Reference. E.
1. IMPORT ANT NO TICE: DO NO T MODIFY THIS UNIT! This product, when installed as indicated in the instructions con- tained in this manual, meets FCC requirements. Modifications not expressly appro ved b y Y amaha ma y void y our authority , granted b y the FCC, to use the product.
The abov e warning is located on the side of the unit • Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to th.
(5)-1 1/2 PRECAUTIONS PLEASE READ CAREFULL Y BEFORE PROCEEDING * Please keep this man ual in a saf e place f or future ref erence. W ARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards.
(5)-1 2/2 • Do not insert your fingers or hand in any gaps or openings on the device (vents, etc.). •A void inserting or dropping foreign objects (paper , plastic, metal, etc.) into any gaps or openings on the device (vents, etc.) If this happens, turn off the power immediately and unplug the power cord from the AC outlet.
6 Yamaha Pro Audio global website DM1000 Version 2—Owner’s Manual Y amaha Pro Audio global website http://www .yamahaproaudio.c om/ Package Contents • DM1000 Digital Production C onsole • CD-R.
New Functions in DM1000 Version 2 7 DM1000 Version 2—Owner’s Manual New Functions in DM1000 V ersion 2 The following functions hav e been added to the DM1000 as part of the upg rade of the firm- ware fr om version 1.
8 New Functions in DM1000 Version 2 DM1000 Version 2—Owner’s Manual Automix •Y ou can insert the mix par ameters in a r egion sp ecified in the A utomix data. → page 193 •T ouching the faders can punch parameter values in and out if the corresponding O VER - WRITE button is set to on (T ouch Sence Edit In ALL ).
Contents 9 DM1000 Version 2—Owner’s Manual Contents 1 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2 Control Surface & Rear Panel . . . . . . . . . . . . . . . . . . . 15 Control Surface . . . . . . . . . . .
10 Contents DM1000 Version 2—Owner’s Manual 8 Aux Sends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Aux Out 1–8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 11 DM1000 Version 2—Owner’s Manual 15 Libraries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 About the Libraries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12 Contents DM1000 Version 2—Owner’s Manual Appendix A: Parameter Lists . . . . . . . . . . . . . . . . . . . . . . 293 USER DEFINED KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293 USER DEFINED KEYS Initial Assignments .
Welcome 13 DM1000 Version 2—Owner’s Manual 1 W elcome 1 W elcome Thank you for choosing the Y amaha DM1000 Digital Production Console. The compact DM1000 Digital Console featur es 24-bit/96 kHz digital audio processing w ithout compr omise, as well as 48-channel simultaneous mixing.
14 Chapter 1—Welcome DM1000 Version 2—Owner’s Manual ■ Channel Configuration •S imultaneous mixing of up to 48 Input Channels. Group multiple channels and pair c hannels for st ereo . •8 B us Outs and 8 A UX Sends. Buses 1-8 can be routed t o Stereo Buses for use as G roup B uses.
Control Surface & Rear Panel 15 DM1000 Version 2—Owner’s Manual 2 Control Surface & Rear Panel 2 Control Sur face & Rear Panel Control Sur face AUX PAN DISPLAY ASSIGN E NC ODER MODE EQ.
16 Chapter 2—Control Surface & Rear Panel DM1000 Version 2—Owner’s Manual AD Input Section A +48V ON/OFF switches 1–16 These switches turn on or off the +48 V phantom pow er feed to each INPUT . B P AD switches 1–16 These switches turn on or off the 20 dB pad (attenuator) for each AD Input.
Control Surface 17 DM1000 Version 2—Owner’s Manual 2 Control Surface & Rear Panel Channel Strip Section A Encoders 1–16 These rotary Encoders adjust the channel parameter settings.
18 Chapter 2—Control Surface & Rear Panel DM1000 Version 2—Owner’s Manual AUX SELECT Section A [DISPLA Y] button This button displa ys an A ux-related page (see page 99). B [AUX 1]–[AUX 8] buttons These buttons select an A ux Send. W hen you press a button t o select an A UX Send, the c or- r esponding butt on indicator lights up.
Control Surface 19 DM1000 Version 2—Owner’s Manual 2 Control Surface & Rear Panel DISPLA Y ACCESS Section A [AUTOMIX] button This button displa ys an A utomix page, enabling you t o make A utomix settings (see page 187). B [DIO] button This button displa ys a DIO page, enabling y ou to mak e digital I/O settings (see page 55).
20 Chapter 2—Control Surface & Rear Panel DM1000 Version 2—Owner’s Manual N [DYNAMICS] button This button displa ys a Dynamics page, enabling y ou to c ontrol channel gates and c ompres- sors (see page 65).
Control Surface 21 DM1000 Version 2—Owner’s Manual 2 Control Surface & Rear Panel SELECTED CHANNEL Section A ROUTING [DISPLA Y] button This button displa ys a Routing page, enabling you t o route select ed channels to the desired B us, and adjust the le vel of the sig nals rout ed from Buses 1–8 to the St ereo Bus (see page 71 and 85).
22 Chapter 2—Control Surface & Rear Panel DM1000 Version 2—Owner’s Manual LA YER Section A [1-16]/[17-32]/[33-48] buttons These buttons select an Input Channel La yer . The channel strips control Channels 1–16, 17–32, or 33–48, depending on the button selected her e.
Control Surface 23 DM1000 Version 2—Owner’s Manual 2 Control Surface & Rear Panel USER DEFINED KEYS Section A [DISPLA Y] button This button displa ys a U ser Def page, enabling y ou to assign functions to but- to ns 1–12 (see page 274). B [1]–[12] buttons These buttons perform the functions assigned in the User Def pages.
24 Chapter 2—Control Surface & Rear Panel DM1000 Version 2—Owner’s Manual MONITOR Section A [DISPLA Y] button This button displa ys a Monit or page, enabling y ou to adjust monit or settings (see page 119 and 136). B [SOLO] indicator This indicator flashes when a single or multiple channels are soloed.
Rear Panel 25 DM1000 Version 2—Owner’s Manual 2 Control Surface & Rear Panel Rear Panel AD Input and Output Section A INPUT connectors 1–16 These balanced XLR -3-31-ty pe con- nectors acc ept line-level and micro- phone signals. The nominal signal level r anges from –60 dB thr ough +4 dB.
26 Chapter 2—Control Surface & Rear Panel DM1000 Version 2—Owner’s Manual SLOT Section A SLOT 1 & 2 Y ou can insert optional mini-Y GD AI cards into these slots.
Rear Panel 27 DM1000 Version 2—Owner’s Manual 2 Control Surface & Rear Panel G WORD CLOCK OUT connector This BNC connect or outputs a wordclock signal fr om the DM1000 to a connect ed external dev ice. H WORD CLOCK IN connector This BNC connect or inputs a wordclock signal from a c onnected ext ernal dev ice to the DM1000.
28 Chapter 2—Control Surface & Rear Panel DM1000 Version 2—Owner’s Manual Installing an Optional Card V isit the following Y amaha Pr o A udio web site to ensur e that the card you ar e installing is supported by the DM1000. Also , verify the number of cards (including other Y amaha or third-party cards) that can be installed in the unit.
Operating Basics 29 DM1000 Version 2—Owner’s Manual 3 Operating Basics 3 Operating Basics This chapter describes basic operations on the DM1000, including how to use the displa y and operate the controls on the t op panel. About the Display The top panel displa y indicates various parameters that you must set befor e you can operate the DM1000.
30 Chapter 3—Operating Basics DM1000 Version 2—Owner’s Manual F MIDI indicator This indicator appears when the DM1000 is rec eiving MIDI data v ia the MIDI IN port, USB port, REMO TE connect or , or an installed MY8-mLAN car d. G Surround mode indicator This indicator identifies the currently-selected S urround mode (ST=stereo , 3-1, 5.
Display Interface 31 DM1000 Version 2—Owner’s Manual 3 Operating Basics • Selecting the next page in a page group: Pr ess the button you select ed in Step 1 repeat edly . This enables y ou to select a page that has a hidden tab. •T o select the previous page in a page group: Pr ess and hold down the button you select ed in Step 1.
32 Chapter 3—Operating Basics DM1000 Version 2—Owner’s Manual Confirmation Messages Fo r certain functions, the DM1000 pr ompts you for confirmation befor e ex ecuting the functions, as shown here. Mo ve the cursor to YES and press [ENTER] to e xecut e the function, or mo ve the cursor to NO and press [ENTER] to canc el.
Selecting Layers 33 DM1000 Version 2—Owner’s Manual 3 Operating Basics Selecting Layers I nput Channels and Output Channels (B us Outs & A ux Outs) are arranged into layers, as illustrated below .
34 Chapter 3—Operating Basics DM1000 Version 2—Owner’s Manual Selecting Channels The SELECTED CHANNEL controls enable y ou to edit main mix parameters for a channel selected fr om the Input Channels and Output Channels (A ux Outs, Bus Outs, and Stereo Out).
Selecting Fader Modes 35 DM1000 Version 2—Owner’s Manual 3 Operating Basics Selecting Fader Modes The function of channel faders (1–16) depends on the selected La yer and Fader mode. 1 Select a layer that includes the desired channel (see page 33).
36 Chapter 3—Operating Basics DM1000 Version 2—Owner’s Manual Selecting Encoder Modes The function of Encoders (1–16) depends on the selected La yer and Enc oder mode. 1 Select a layer that includes the desired channel (see page 33). 2 Press the corresponding ENCODER MODE button to select an Encoder mode.
Assigning Parameters to the ENCODER MODE [ASSIGN] button 37 DM1000 Version 2—Owner’s Manual 3 Operating Basics Assigning Parameters to the ENCODER MODE [ASSIGN] button W hile the ENCODER MODE [ASSIGN] button indicator is lit, you can use Encoders 1–16 to co ntrol a parameter assigned to the [ASSIGN] button.
38 Chapter 3—Operating Basics DM1000 Version 2—Owner’s Manual • Assignable Encoder Mode Parameter List # Parameters Encoder Operation Push Switch Operation 1 No Assign —— 2 Attenuator Attenuator Display the settings. 3 Input Patch Input Channel patch Confirm patch selection.
Metering 39 DM1000 Version 2—Owner’s Manual 3 Operating Basics Metering This section describes how to check I npu t and Output Channel levels using the M eter pages or an optional MB1000 P eak M eter Bridge. 1 Press the DISPLA Y ACCESS [METER] button repeatedly until the Meter | Posi- tion page appears.
40 Chapter 3—Operating Basics DM1000 Version 2—Owner’s Manual -S t e r e o page This page displays the St ereo Out or Control R oom Mo nitor output level. 4 If you selected the CH1-32 page, the CH33-48 page, or the Master page, use the MASTER MODE parameter to select one of the following three metering signal types: • GA TE GR .
Metering 41 DM1000 Version 2—Owner’s Manual 3 Operating Basics 5 If you selected the Stereo page, use the METER MODE parameter to select one of the following two metering signal types: • C-R ................................. Control Room M onitor output signal • STEREO .
42 Chapter 3—Operating Basics DM1000 Version 2—Owner’s Manual.
Connections and Setup 43 DM1000 Version 2—Owner’s Manual 4 Connections and Setup 4 Connections and Setup This chapter e xplains how to c onnect and set up your DM1000. Connections The following section explains three typical ways to c onnect the DM1000 to external equip- ment, although there are numer ous others.
44 Chapter 4—Connections and Setup DM1000 Version 2—Owner’s Manual ■ Configuring a recording system with a hard disk recorder In this system, the DM1000, with optional I/O cards (MY8-A T , MY16-A T , MY8-TD , et c.) installed in Slots 1 and 2, is one component in a system that includes a digital MTR, such as a hard disk rec order .
Connections 45 DM1000 Version 2—Owner’s Manual 4 Connections and Setup ■ Configuring a recording system that uses a DA W (Digital Audio W orkstation) In this system, the DM1000, with optional I/O cards (MY8-A T , MY16-A T , MY8-AE, etc.) installed in Slots 1 and 2, is connected t o a compute r-based D A W (Dig ital A udio W orksta- tion).
46 Chapter 4—Connections and Setup DM1000 Version 2—Owner’s Manual W ordclock Connections and Settings About wordclock Digital audio equipment must be synchronized when digital audio signals are transferred from one device to another .
Wordclock Connections and Settings 47 DM1000 Version 2—Owner’s Manual 4 Connections and Setup If the external dev ices do not ha ve wor dclock in and out connect ors, y ou can use the clock information included in the digital audio sig nals.
48 Chapter 4—Connections and Setup DM1000 Version 2—Owner’s Manual The source select butt on indicators ar e explained below: A usable wor dclock signal is present at this input, and it is in sync with the current DM1000 internal clock. No wor dclock signal is present at this input.
Input and Output Patching 49 DM1000 Version 2—Owner’s Manual 4 Connections and Setup Input and Output Patching The DM1000 is designed to enable you to pat ch (assign) sig nals to Inputs and Outputs. This section explains how t o view the sig nals patched t o Inputs and Outputs and change the assignment.
50 Chapter 4—Connections and Setup DM1000 Version 2—Owner’s Manual • 2D2L & 2D2R ............... 2TR DIGIT AL IN 2 (L/R) • BUS1–8 .....
Input and Output Patching 51 DM1000 Version 2—Owner’s Manual 4 Connections and Setup • SURR XXX (“X XX” is a channel name). .............. Surround M onitor Outs • CR -L/CR -R ........................................... C ontrol Room M onitor signals • CAS BUS1–BUS8 .
52 Chapter 4—Connections and Setup DM1000 Version 2—Owner’s Manual.
Analog I/O & Digital I/O 53 DM1000 Version 2—Owner’s Manual 5 Analog I/O & Digital I/O 5 Analog I/O & Digital I/O This chapter describes the DM1000’ s analog and digital input/output connectors as well as the basic operations inv olving the digital I/Os.
54 Chapter 5—Analog I/O & Digital I/O DM1000 Version 2—Owner’s Manual Omni Outs • OMNI OUT connectors 1–12 The DM1000 rear panel features OMNI OUT c onnectors 1–12 for co nnecting line-level sources, such as a monitoring system, master re cor der , external effects proc essor .
Converting Sampling Rates of Signals Received at 2TR Digital Inputs 55 DM1000 Version 2—Owner’s Manual 5 Analog I/O & Digital I/O The following mini-Y GD AI I/O cards ar e currently available. See the Y amaha Pr ofessional A udio W eb site at the following URL for up-to-date news on I/O cards: <http://www .
56 Chapter 5—Analog I/O & Digital I/O DM1000 Version 2—Owner’s Manual The DIO | W ord Clock page appears. Use the follo wing buttons to turn the sampling rate co nv er ter on and off. • 2TR IN D1 ..................... This button turns on and off the sampling r ate co nv erter for 2TR IN DIGIT AL 1.
Monitoring Digital Input Channel Status 57 DM1000 Version 2—Owner’s Manual 5 Analog I/O & Digital I/O 4 Use the cursor buttons to move the cursor to any two-channel button in the SRC sections ( 1 ), then press [ENTER]. The sampling rate con verter for the selected 2-channel input turns on or off.
58 Chapter 5—Analog I/O & Digital I/O DM1000 Version 2—Owner’s Manual E CA TEGORY I ndicat es the status of “Category Code Bit” included in the IEC958 Part 2 (S/PDIF-Con- sumer) format.
Dithering Digital Outputs 59 DM1000 Version 2—Owner’s Manual 5 Analog I/O & Digital I/O Dithering Digital Outputs Wh en digital audio is transfer red to lo wer -resolution systems, t runcated bits may generate unpleasant noise.
60 Chapter 5—Analog I/O & Digital I/O DM1000 Version 2—Owner’s Manual 3 Press the DISPLA Y ACCESS [DIO] button, then press the [F2] button. The DIO | Format page appears.
Input Channels 61 DM1000 Version 2—Owner’s Manual 6 Input Channels 6 Input Channels This chapter describes how t o adjust the DM1000’ s Input Channel parameters.
62 Chapter 6—Input Channels DM1000 Version 2—Owner’s Manual •P A N This section enables you t o adjust the pan setting of the signals routed from the I nput Chan- nels to the Ster eo Bus. Y ou can also apply the pan setting to a pair of Bus channels.
Setting the Input Channels from the Display 63 DM1000 Version 2—Owner’s Manual 6 Input Channels Setting the Input Channels from the Display To set the Input Channel parameters, you can either mov .
64 Chapter 6—Input Channels DM1000 Version 2—Owner’s Manual The parameters on these three pages (and the pr ocedure for setting them) ar e the same. A DELA Y SCALE The following buttons determine the units of the delay value shown below the msec value.
Setting the Input Channels from the Display 65 DM1000 Version 2—Owner’s Manual 6 Input Channels Gating Input Channels To set the Input Channel gat es, use the [SEL] butto ns to select the desir ed Input Channel, then press the DISPLA Y A CCESS [D YN AMICS] button, then the [F1] button.
66 Chapter 6—Input Channels DM1000 Version 2—Owner’s Manual Compressing Input Channels To set the Input Channel c ompressors, use the [SEL] buttons to select the desired I nput Channel, then press the DISPLA Y A CCESS [D YNAMICS] butt on, then the [F3] butt on to display the Dynamics | C omp Edit page.
Setting the Input Channels from the Display 67 DM1000 Version 2—Owner’s Manual 6 Input Channels Attenuating Input Channels To set the atten uator for each channel, press the SELECTED CHANNEL EQU ALIZER [DISPLA Y] button repeatedly until the page listed belo w that contains the desir ed channels appears.
68 Chapter 6—Input Channels DM1000 Version 2—Owner’s Manual EQ’ing Input Channels The DM1000’ s Input Channels feature 4-band (L OW , L OW -MID , HIGH-MID , HIGH) parametr ic EQ. The L O W -MID and HIGH-MID bands are a peaking type of EQ. The L OW and HIGH bands can be set to shelving, peaking, or HPF and LPF respecti vely .
Setting the Input Channels from the Display 69 DM1000 Version 2—Owner’s Manual 6 Input Channels F LOW , L-MID, H-MID, HIGH sections These sections contain the Q, Frequency (F), and Gain (G) parameters for the four bands.
70 Chapter 6—Input Channels DM1000 Version 2—Owner’s Manual Panning Input Channels I nput Channels can be panned in the range of L63 through CENTER to R63. T o pan each c hannel, press the [P AN/SURROUND] button r epeatedly until one of the following pages that contains the desir ed channels appears.
Setting the Input Channels from the Display 71 DM1000 Version 2—Owner’s Manual 6 Input Channels Routing Input Channels Y ou can rout e each Input Channel to the St ereo Bus, Bus 1–8, or its ow n Direct Out. W ith the default setting, signals are r outed only to the Ster eo Bus.
72 Chapter 6—Input Channels DM1000 Version 2—Owner’s Manual D D button Wh en this button is turned on, the currently-selected Input Channel is r outed to its Direct Out. See page 115 for more information on the Direct Out. E ALL STEREO button This button turns on the S button for all channels on the page.
Setting the Input Channels from the Display 73 DM1000 Version 2—Owner’s Manual 6 Input Channels E Meters These meters indicate the signal levels of the currently-selected Input Channel and its av ailable pair par tner . F (Phase) section Y ou can rev erse the signal phase of the cur rently-select ed Input Channel.
74 Chapter 6—Input Channels DM1000 Version 2—Owner’s Manual C BUS ROUTING/FOLLOW P AN section • BUS R OUTING ............ This section enables you to select a destination Bus for the selected channel. W hen the D button is turned on, the channel signal is patched to the Dir ect Out selected in the parameter bo x below the button.
Setting the Input Channels from the Control Surface 75 DM1000 Version 2—Owner’s Manual 6 Input Channels Setting the Input Channels from the Control Sur face Y ou can use the faders, Encoders, [SEL.
76 Chapter 6—Input Channels DM1000 Version 2—Owner’s Manual 4 Use the EQUALIZER [Q], [FREQUENCY], and [GAIN] controls to adjust the Q, frequency , and gain of the band selected in Step 3.
Pairing Input Channels 77 DM1000 Version 2—Owner’s Manual 6 Input Channels ■ Pairing Channels by Using the [SEL] Buttons 1 While pressing and holding down the [SEL] button for one of the channels you wish to pair , press the [SEL] button for the adjacent channel.
78 Chapter 6—Input Channels DM1000 Version 2—Owner’s Manual ■ Pairing Input Channels Using the Display 1 Press the [P AIR/GROUP] button repeatedly until the Pair/Grup | Input page appears. The parameters on this page are described below: A P AIR MODE Determines how c hannels are paired.
Naming Input Channels 79 DM1000 Version 2—Owner’s Manual 6 Input Channels Naming Input Channels By default, I nput Channels are named CH1, CH2, etc.
80 Chapter 6—Input Channels DM1000 Version 2—Owner’s Manual Using MS Stereo Microphone The MS system is a ty pe of stereo r ecor ding that uses two microphones; mono-dir ectional M (Middle) and bi-directional S (S ide) micr ophones. An M micr ophone picks up main sig- nals, and an S microphone picks up directional signals.
Bus Outs 81 DM1000 Version 2—Owner’s Manual 7 Bus Outs 7 Bus Outs This chapter describes how t o adjust the DM1000’ s Stereo Out and Bus Out parameters. About Stereo Out The Stereo Out section r eceiv es Input Channel and Bus Out 1–8 signals, mix es them into two channels, processes them using on-board EQ, compressor , etc.
82 Chapter 7—Bus Outs DM1000 Version 2—Owner’s Manual Bus Out 1–8 The Bus Out 1–8 section mix es signals routed from I nput Channels to the specified buses, proc esses them using on-board EQ, compr essor , etc., then routes them to the specified out- put connect ors or I/O cards.
Setting the Stereo Out and Bus Out 1–8 from the Display 83 DM1000 Version 2—Owner’s Manual 7 Bus Outs Setting the Stereo Out and Bus Out 1–8 from the Display To set the Ster eo Out and Bus Out.
84 Chapter 7—Bus Outs DM1000 Version 2—Owner’s Manual Compressing the Stereo Out and Bus Outs To set the Ster eo Out and Bus Out 1–8 compr essors, press the [D YNAMICS] butt on, then the [F3] button to displa y the Dynamics | Comp Edit page, and use the [SEL] buttons or faders to select the Ster eo Out or Bus Out 1–8.
Setting the Stereo Out and Bus Out 1–8 from the Display 85 DM1000 Version 2—Owner’s Manual 7 Bus Outs Routing Bus Out 1–8 Signals to the Stereo Bus Y ou can patch B us Out 1–8 signals to Outputs and Slots 1/2, as w ell as to the Stereo B us.
86 Chapter 7—Bus Outs DM1000 Version 2—Owner’s Manual V iewing the Stereo Out and Bus Out Settings Y ou can view and adjust parameter settings for the currently-selected Stereo Out or B us Out on the V iew | P arameter and Fader pages.
Setting the Stereo Out and Bus Out 1–8 from the Display 87 DM1000 Version 2—Owner’s Manual 7 Bus Outs C Fader This fader adjusts the Stereo Out output lev els, and links with the [STEREO] fader . The fader knob is highlig hted when the fader is set to 0.
88 Chapter 7—Bus Outs DM1000 Version 2—Owner’s Manual Setting the Stereo Out and Bus Out 1–8 from the Control Sur face Y ou can use the faders, Encoders, [SEL] buttons, and various buttons and c ontrols in the SELECTED CHANNEL section on the top panel t o directly contr ol certain parameters for the Stereo Out and B us Out 1–8.
Pairing Buses or Aux Sends 89 DM1000 Version 2—Owner’s Manual 7 Bus Outs Pairing Buses or Aux Sends Y ou can pair adjacent odd-ev en (in this order) buses or A ux Sends for stereo operation.
90 Chapter 7—Bus Outs DM1000 Version 2—Owner’s Manual Attenuating Output Signals To attenuate the DM1000’ s output signals, displa y the EQ | Out Att page and adjust the Ste- re o Out and Bus Out 1–8 attenuators indi v idually . If necessar y , you can also select Output and I/O card c hannels and specify the amount of attenuation.
Naming the Stereo Out and Bus Outs 91 DM1000 Version 2—Owner’s Manual 7 Bus Outs Naming the Stereo Out and Bus Outs Y ou can change the default Bus names (B US1, A UX4, STEREO , etc.). It ma y be con venient to name the buses “Monit or Out” or “Effect Se nd, ” for example, so that y ou can easily iden- tify the signal ty pe.
92 Chapter 7—Bus Outs DM1000 Version 2—Owner’s Manual.
Aux Sends 93 DM1000 Version 2—Owner’s Manual 8 Aux Sends 8 Aux Sends This chapter describes how t o control A ux Out 1–8. Aux Out 1–8 The A ux Out 1–8 section mixes signals r outed from the Input Channels t o the correspond- ing A ux Sends, processes them using on-boar d EQ, c ompressor , etc.
94 Chapter 8—Aux Sends DM1000 Version 2—Owner’s Manual Setting Aux Out 1–8 from the Control Sur face Y ou can use the faders, Encoders, [SEL] buttons, and various buttons and c ontrols in the SELECTED CHANNEL section on the top panel t o directly contr ol certain parameters for A ux Out 1–8.
Setting Aux Out 1–8 from the Display 95 DM1000 Version 2—Owner’s Manual 8 Aux Sends Delaying Aux Outs To dela y A ux Out 1–8 signals, press the [ /INSER T/DELA Y] button repeatedly until the /INS/DL Y | Out Dly page appears.
96 Chapter 8—Aux Sends DM1000 Version 2—Owner’s Manual EQ settings To set the EQ for A ux Out 1–8, pr ess the EQU ALIZER [DISPLA Y] button r epeatedly to dis- play the EQ | EQ Edit page, and use the [SEL] buttons or faders to select A ux Out 1–8.
Setting Aux Out 1–8 from the Display 97 DM1000 Version 2—Owner’s Manual 8 Aux Sends ■ Viewing Faders and On/Off Parameters To display the V iew | Fader page, use the c orresponding [SEL] button or fader to select the desired A ux Out (1–8), then press the DISPLA Y A CCESS [VIEW] butt on, then the [F2] but- ton.
98 Chapter 8—Aux Sends DM1000 Version 2—Owner’s Manual Setting Aux Send Levels Y ou can adjust the level of sig nals routed fr om Input Channels to the c orresponding A ux Out (1–8). T o do this, y ou can either use the Encoders on the to p panel or set the parameters on the screen.
Setting Aux Send Levels 99 DM1000 Version 2—Owner’s Manual 8 Aux Sends Setting Send Levels from the Display Y ou can view multiple channels’ A ux Send levels on the screen and adjust them indi v idually . 1 Press the AUX SELECT [AUX 1]–[AUX 8] buttons to select the Aux Sends.
100 Chapter 8—Aux Sends DM1000 Version 2—Owner’s Manual 3 Move the cursor to the FIXED or V ARIABLE button in the MODE section for the currently-selected Aux Send to select a mode. • Fixed Mode In this mode, A ux Send levels are fix ed at nominal (0.
Setting Aux Send Levels 101 DM1000 Version 2—Owner’s Manual 8 Aux Sends 4 If you switched to Fixed mode in Step 3, the ON/OFF buttons turn on or off each Input Channel on or off for the currently-selected Aux Send.
102 Chapter 8—Aux Sends DM1000 Version 2—Owner’s Manual V iewing Aux Send Settings for Multiple Channels Y ou can view and set parameters for all A ux Send 1–8, including setting lev els and Pre/P ost parameters.
Viewing Aux Send Settings for Multiple Channels 103 DM1000 Version 2—Owner’s Manual 8 Aux Sends 3 If you selected the PRE/POST button in Step 2, move the cursor to the desired Input Channel and Aux intersection, then press the [ENTER] button to change the signal source point.
104 Chapter 8—Aux Sends DM1000 Version 2—Owner’s Manual Panning Aux Sends Y ou can pair adjacent odd-ev en (in this order) A ux Sends for stereo operation. This enables y ou to pan signals from Input Channels t o paired A ux Sends. 1 Pair the desired two Aux Sends.
Excluding Certain Channels from Aux Sends (Mix Minus) 105 DM1000 Version 2—Owner’s Manual 8 Aux Sends 6T o link the Input Channel Pan setting with the Aux Send Pan setting, move the cursor to the INPUT P AN LINK ON/OFF button, then press [ENTER].
106 Chapter 8—Aux Sends DM1000 Version 2—Owner’s Manual Copying Channel Fader Positions to Aux Sends W hile A ux Sends are in V ar iable mode, you can c opy all Input Channel fader positions on one lay er to the corresponding Aux Sends.
Soloing AUX Sends using the [AUX 1]–[AUX 8] Buttons 107 DM1000 Version 2—Owner’s Manual 8 Aux Sends Soloing AUX Sends using the [AUX 1]–[AUX 8] Buttons Y ou can turn the Solo function on and off using the A UX SELECT [A UX 1]–[A UX 8] but- to ns, without having to switch t o the Master la yer .
108 Chapter 8—Aux Sends DM1000 Version 2—Owner’s Manual.
Input & Output Patching 109 DM1000 Version 2—Owner’s Manual 9 Input & Output Patching 9 Input & Output Patching This chapter describes how t o patch (assign) signal paths w ithin the D.
110 Chapter 9—Input & Output Patching DM1000 Version 2—Owner’s Manual Input Patching from the Display 1 Press the DISPLA Y ACCESS [INPUT P A TCH] button repeatedly until the In Patch | In Patch page appears.
Input Patching 111 DM1000 Version 2—Owner’s Manual 9 Input & Output Patching Using the Encoders for Input Patching By default, y ou can also use the Encoders on the t op panel to change the Input P atching. 1 Press the ENCODER MODE [ASSIGN] button.
112 Chapter 9—Input & Output Patching DM1000 Version 2—Owner’s Manual Output Patching The DM1000’ s Stereo Out, Bus Out 1–8, A ux Out 1–8 signals can be patched to an y outputs and slot channels.
Output Patching 113 DM1000 Version 2—Owner’s Manual 9 Input & Output Patching Patching Omni Outs Y ou can rout e the DM1000’ s internal sig nals to OMNI OUT 1–12. 1 Press the DISPLA Y ACCESS [OUTPUT P A TCH] button repeatedly until the Out Patch | Omni Out page appears.
114 Chapter 9—Input & Output Patching DM1000 Version 2—Owner’s Manual Patching the 2TR Digital Outputs Y ou can rout e the DM1000’ s internal sig nals to 2TR OUT DIGIT AL connectors 1–2. 1 Press the DISPLA Y ACCESS [OUTPUT P A TCH] button repeatedly until the Out Patch | 2TR Out page appears.
Patching Direct Outs 115 DM1000 Version 2—Owner’s Manual 9 Input & Output Patching Patching Direct Outs I nput Channel 1–48 signals can be directly pat ched to an y outputs or slot outputs, as well as Bus Out 1–8 and Ster eo Out.
116 Chapter 9—Input & Output Patching DM1000 Version 2—Owner’s Manual Insert Patching The DM1000’ s Input Channels and Output Channels (Stereo Out, Bus Out 1–8, A ux Out 1–8) feature independent Insert Ins and Outs.
Insert Patching 117 DM1000 Version 2—Owner’s Manual 9 Input & Output Patching B INSERT section • ON/OFF ......................... This button turns Inser t on or off. • OUT ............................... This parameter enables you to select outputs, slot channels, or internal effects inputs as the Insert Out destination.
118 Chapter 9—Input & Output Patching DM1000 Version 2—Owner’s Manual V iewing and Changing Insert In Patch Y ou can view and also change the items patched t o the Insert Ins of all Input Channels (or all Output Channels). This is useful when you wish to find out if multiple channels ha ve the same patch.
Control Room Monitoring 119 DM1000 Version 2—Owner’s Manual Control Room Monitoring 10 10 Control Room Monitoring This chapter e xplains how to set up c ontrol room monitoring and use the Solo and T alkback functions on the DM1000.
120 Chapter 10—Control Room Monitoring DM1000 Version 2—Owner’s Manual Solo Setup Fo r solo setup, press the MONIT OR [DISPLA Y] button repeatedly until the M onitor | Solo page appears. This page contains the follo wing par ameters: A SOLO This parameter turns the Solo function on or off.
Using the Solo Function 121 DM1000 Version 2—Owner’s Manual Control Room Monitoring 10 D LISTEN This parameter determines the sourc e of the Input Channel Solo signal: Pr e Fader or Af te r Pan.
122 Chapter 10—Control Room Monitoring DM1000 Version 2—Owner’s Manual 3T o solo and monitor Input Channels, press the corresponding LA YER button to select a Layer that contains the desired channels, then press the channel [SOLO] buttons. The channel [SOL O] button indicators and the MONIT OR [SOLO] indicat or light up.
Using the Talkback Function 123 DM1000 Version 2—Owner’s Manual Control Room Monitoring 10 B CONTROL ROOM DIMMER LEVEL This parameter determines the amount of attenuation applied to the Control R oom Mo nitor signal by the Dimmer function when you press the MONIT OR [DIMMER] button.
124 Chapter 10—Control Room Monitoring DM1000 Version 2—Owner’s Manual 1 Press the MONITOR [DISPLA Y] button repeatedly until the Monitor | C-R/TB page appears. This page contains the follo wing par ameters: A OUTPUT ASSIGN section The buttons in this section enable y ou to assign the T alkback mic signal to the desired outputs.
Surround Functions 125 DM1000 Version 2—Owner’s Manual Surround Functions 11 11 Surround Functions This chapter describes surround panning, which determines how I nput Channel signals are panned within and across the stereo field.
126 Chapter 11—Surround Functions DM1000 Version 2—Owner’s Manual • 6.1 This mode uses seven channels that include six c hannels of 5.1 mode plus rear center . Wh en you select one of these Surround modes, each surround channel is r outed to the B uses specified on the Setup | Surr Bus page (see page 130).
Using Surround Pan 127 DM1000 Version 2—Owner’s Manual Surround Functions 11 Y ou can rec ord each surround c hannel to a separate track to recor d surround panning. The following diagram is an example in which each channel signal in 5.1 Surround mode is re co rd ed to digital MTR tracks.
128 Chapter 11—Surround Functions DM1000 Version 2—Owner’s Manual Setting Up and Selecting Surround Pan Modes To c onfigure the surround en vironment, select 3-1, 5.1, or 6.1 S urround mode on the DM1000 and connect a multi-c hannel monitoring system to the DM1000.
Using Surround Pan 129 DM1000 Version 2—Owner’s Manual Surround Functions 11 3 Press the [ENTER] button. The confirmation window for changing the Surround mode appears. 4 Move the cursor to the YES button, then press [ENTER]. The DM1000 enters the selected S urround mode.
130 Chapter 11—Surround Functions DM1000 Version 2—Owner’s Manual 6T o change the Surround Channel to Bus Out assignment, move the cursor to the SURR/BUS SETUP button, then press [ENTER]. The Setup | Surr Bus page appears. A BUS1–BUS8 These parameters select channels to be assigned to the B us Outs in 3-1, 5.
Using Surround Pan 131 DM1000 Version 2—Owner’s Manual Surround Functions 11 Surround Panning from the Display Y ou can set the surround pan parameters for each I nput Channel from the displa y . 1 Make sure that the DM1000 is in one of the Surround modes, then press the [SEL] button of the channel for which you want to set surround pan.
132 Chapter 11—Surround Functions DM1000 Version 2—Owner’s Manual E LFE This parameter contr ol sets the level of the LFE (Low F requency Effects) Channel signal ro uted to the subw oofer , and appears only in 5.
Using Surround Pan 133 DM1000 Version 2—Owner’s Manual Surround Functions 11 • ...................... The sound image mov es between front and r ear .
134 Chapter 11—Surround Functions DM1000 Version 2—Owner’s Manual • ...................... The sound image mov es between front and r ear while tracing an arc. W ith this pattern, y ou can also fine-tune the radius and shape of the arc using the WIDTH, DEPTH, OFFSET ( ), and OFFSET ( ) parameters.
Using Surround Pan 135 DM1000 Version 2—Owner’s Manual Surround Functions 11 The following table shows ho w the sound images on two linked c hannels move when dif- ferent trajectory patterns and stereo link patterns are c ombined.
136 Chapter 11—Surround Functions DM1000 Version 2—Owner’s Manual A Surround pan graphs These graphs display the trajector y patterns and the current pan positions for the Input Channels. Mo ve the cursor to the desir ed channel’ s gr aph, then rotate the P arameter wheel to adjust the pan settings along the selected trajectory pattern.
Surround Monitoring 137 DM1000 Version 2—Owner’s Manual Surround Functions 11 The following diagram shows an example of 5.1 Surround M onitor signals patched t o OMNI OUT s 1–6. U se the following two buttons in the MONIT OR section on the top panel t o select the Sur - r ound Monit or signal source.
138 Chapter 11—Surround Functions DM1000 Version 2—Owner’s Manual Configuring Basic Surround Monitoring Y ou can set basic parameters for Surr ound Monit or , including monitor matrix , Bass Man- agement , and monitor alignment . To do so , press the MONIT OR [DISPLA Y] button repeatedly until the M onitor | S urr Setup page appears.
Surround Monitoring 139 DM1000 Version 2—Owner’s Manual Surround Functions 11 The following diagram shows an example in 5.1 Surround mode and 3-1 M onitor M atrix mode. • BASS MANAGEMENT Y ou can set the filter and att enuator settings for each Surround M onitor Channel using eight preset Bass Management modes.
140 Chapter 11—Surround Functions DM1000 Version 2—Owner’s Manual About the Presets (1) DVD LFE80Hz This is a preset optimized for D VD-V ideo production. The LFE playback bandwidth is set up to 80 Hz. W hen using this preset, we recommend that y ou use an external device to apply an LPF (fc=80 Hz, –24 dB/oct) to the LFE master sour ce.
Surround Monitoring 141 DM1000 Version 2—Owner’s Manual Surround Functions 11 [THXM] THX Music This preset is c onfigured for DVD-M usic production. U se this preset when mixing and/or monitoring multi-channel music c ontent (including DVD-A udio and SA CD).
142 Chapter 11—Surround Functions DM1000 Version 2—Owner’s Manual • MONITOR ALIGNMENT Y ou can adjust the Atte nuator and Dela y for each Surround M onitor Channel. This func- tion is primarily used to correct the level differenc e and delay time among speak ers.
Surround Monitoring 143 DM1000 Version 2—Owner’s Manual Surround Functions 11 A MUTE/SOLO section This section enables you t o mute or solo Surround M onitor Channels for each Bus. • SOLO ............................. This button turns the Surround Mo nitor Solo function on or off.
144 Chapter 11—Surround Functions DM1000 Version 2—Owner’s Manual Using the Oscillator for Surround Monitor The DM1000 features a dedicated Oscillat or that enables you to check the output and sound of the surround sound speakers. Y ou can send the Oscillator signal to ce r tain speakers or t o each speaker in turn.
Surround Monitoring 145 DM1000 Version 2—Owner’s Manual Surround Functions 11 4 Move the cursor to the ON/OFF button, then press the [ENTER] or [INC]/[DEC] buttons to turn the Oscillator on. The speaker specified in Step 2 outputs the Oscillat or signal.
146 Chapter 11—Surround Functions DM1000 Version 2—Owner’s Manual.
Grouping Channels & Linking Parameters 147 DM1000 Version 2—Owner’s Manual Grouping Channels & Linking Parameters 12 12 Grouping Channels & Linking Parameters This chapter describes how t o group faders or [ON] buttons for multiple channels and link the EQ or compr essor parameters for simultaneous operation.
148 Chapter 12—Grouping Channels & Linking Parameters DM1000 Version 2—Owner’s Manual Using Fader Groups and Mute Groups Fo llow the steps below t o group faders or [ON] buttons for Input Channels or Output Channels (Bus Outs 1–8, A ux Outs 1–8).
Using Fader Groups and Mute Groups 149 DM1000 Version 2—Owner’s Manual Grouping Channels & Linking Parameters 12 2 Press the up ( ) or down ( ) button to select a group. 3 Press the [SEL] button for a channel you wish to add to the group. The selected channel is mark ed with “ ” and the channel is added to the group .
150 Chapter 12—Grouping Channels & Linking Parameters DM1000 Version 2—Owner’s Manual 7T o use a mute group, press one of the [ON] buttons for the grouped channels.
Using Fader Group Master 151 DM1000 Version 2—Owner’s Manual Grouping Channels & Linking Parameters 12 4 Use the cursor buttons to select parameters, then use the Parameter wheel, INC/DEC buttons, or [ENTER] button to set the parameters. • INPUT/OUTPUT F ADER MASTER .
152 Chapter 12—Grouping Channels & Linking Parameters DM1000 Version 2—Owner’s Manual Using Mute Group Master In addition to the M ute Group function that links the operation of channel [ON].
Linking EQ and Compressor Parameters 153 DM1000 Version 2—Owner’s Manual Grouping Channels & Linking Parameters 12 -O u t EQ page This page enables you t o set EQ links (e–h) for Bus Outs (1–8) and A ux Outs (1–8). -I n C o mp page This page enables you t o set Co mpressor links (i–l) for Input Channels.
154 Chapter 12—Grouping Channels & Linking Parameters DM1000 Version 2—Owner’s Manual 2 Press the up ( ) or down ( ) cursor button to select a link to which you want to add channels. 3 Press the [SEL] button for a channel you wish to add to the EQ or Compressor link.
Internal Effects 155 DM1000 Version 2—Owner’s Manual Internal Effects 13 13 Internal Effects This chapter describes how t o use the DM1000’ s internal effects processors. About the Internal Effects The DM1000 features four internal multi-effects pr ocessors that can be used via A ux Sends or by inserting them into specific channels.
156 Chapter 13—Internal Effects DM1000 Version 2—Owner’s Manual Using Effects Processors via Aux Sends Y ou can use effects proc essors via A ux Sends by patching effects proc essor inputs to A ux Outs, and effects processor outputs t o Input Channels.
Using Effects Processors via Aux Sends 157 DM1000 Version 2—Owner’s Manual Internal Effects 13 • FX1-1–FX4-2 ................ Other effects processor outputs Y ou cannot select outputs FX1–3 to FX1–8. In addition, y ou cannot select the output of the effects processor y ou are cur - re ntly using.
158 Chapter 13—Internal Effects DM1000 Version 2—Owner’s Manual Inserting the Internal Effects into Channels Y ou can insert the internal effects into certain Input Channels or Output Channels (Bus Outs 1–8, A ux Outs 1–8, St ereo Out). 1 Select an internal Effects processor (1–4), then recall the desired effect pro- grams.
Editing Effects 159 DM1000 Version 2—Owner’s Manual Internal Effects 13 Editing Effects To edit effect pr ogr ams recalled to the int ernal Effects processors 1–4, press the DISPLA Y A CCESS [EFFECT] button repeatedly until the Edit pag e for the effects pr ocessor you wish to edit appears.
160 Chapter 13—Internal Effects DM1000 Version 2—Owner’s Manual Wh en you turn on the SYNC parameter , the DM1000 recalculates the dela y time or modulation frequency based on the TEMPO parameter value (tempo) and the NO TE parameter value (note).
About Surround Effects 161 DM1000 Version 2—Owner’s Manual Internal Effects 13 About Surround Effects The effects ty pes available for Effects pr oc essor 1 include surround effects that support 5.
162 Chapter 13—Internal Effects DM1000 Version 2—Owner’s Manual About Plug-Ins If you installed a mini-Y GD AI card that suppor ts the Effects function into Slot 1 or 2, you can use plug-in effects in addition to the internal effects pr ocessors.
Scene Memories 163 DM1000 Version 2—Owner’s Manual Scene Memories 14 14 Scene Memories This chapter describes Scene memories, which stor e DM1000 mix and effects settings.
164 Chapter 14—Scene Memories DM1000 Version 2—Owner’s Manual About Scene Numbers Scene memories are number ed with #U or from #0 through #99. Y ou can store Scenes in Scene memories #1–99. W hen you r ecall a Scene, the Scene memory number (Ud, 00–99) appears on the Scene memory display and at the top of the display page.
Storing and Recalling Scenes 165 DM1000 Version 2—Owner’s Manual Scene Memories 14 Storing and Recalling Scenes Y ou can stor e and recall Scenes b y pressing the buttons on the to p panel or using the dedi- cated Scene memory page on the display .
166 Chapter 14—Scene Memories DM1000 Version 2—Owner’s Manual Storing and Recalling Scenes Using the Scene Memory Page On the Scene M emory page, y ou can store, recall, write-prot ect, delet e, and edit the titles of Scenes. 1 Adjust the mix parameters on the DM1000 to the conditions you wish to store as a Scene.
Auto Scene Memory Update 167 DM1000 Version 2—Owner’s Manual Scene Memories 14 G PA TCH LINK OUTPUT This indicates the Output P atch librar y number that is linked t o each scene. W hen you store a sc ene, the number of the output patch that was most rec ently recalled or stor ed wi ll aut omatically be linked with that scene.
168 Chapter 14—Scene Memories DM1000 Version 2—Owner’s Manual Fading Scenes Y ou can specify the time it takes the I nput and Output Channel faders to mov e to their new positions when a Scene is recalled. This is cal le d Fade T ime, and it can be set for eac h chan- nel in the range of 00.
Fading Scenes 169 DM1000 Version 2—Owner’s Manual Scene Memories 14 Fading Output Channels To set the Fade T ime for the Output Channels (Ster eo Out, B us Outs 1–8, A ux Outs 1–8), press the DISPLA Y A CCESS [SCENE] button repeatedly until the Scene | Out F ade page appears.
170 Chapter 14—Scene Memories DM1000 Version 2—Owner’s Manual Recalling Scenes Safely Wh en a Scene is r ecalled, all mix parameters ar e set acco rdingly . H ow ever , in some situa- tions, y ou can retain the current settings of certain parameters on certain channels by using the Re call Safe funct ion .
Sorting Scenes 171 DM1000 Version 2—Owner’s Manual Scene Memories 14 Sorting Scenes Y ou can sort Scenes in Scene memories. 1 Press the DISPLA Y ACCESS [SCENE] button repeatedly until the Scene | Sort page appears.
172 Chapter 14—Scene Memories DM1000 Version 2—Owner’s Manual 2 Use the cursor buttons, [SEL] buttons, or Parameter wheel to select the chan- nel category , then use the [ENTER] button or the INC/DEC buttons to select the copy source channel. The number of the source channel is highlighted.
Libraries 173 DM1000 Version 2—Owner’s Manual Libraries 15 15 Libraries This chapter describes the DM1000’ s various librar ies. About the Libraries The DM1000 features nine libraries that enable you to st ore Channel, Input P atch, Output Pa tc h, Effects, and other data.
174 Chapter 15—Libraries DM1000 Version 2—Owner’s Manual An “” icon is displa yed next to the name of read-only preset memories. Y ou cannot store, clear , or edit the titles of these memories. Me mories #0 and #U are special read-only memories.
Using Libraries 175 DM1000 Version 2—Owner’s Manual Libraries 15 Using Libraries Channel Library Channel librar y enables you to st ore and re call Input Channel and Output Channel param- eter settings. The librar y contains two pr eset memories and 127 user (readable & wr itable) memories.
176 Chapter 15—Libraries DM1000 Version 2—Owner’s Manual The alarm indicators also appear when the Surround mode, A ux pair , and other non-c han- nel parameter settings originally stored in the memor y do not match those for the destina- tion channel.
Using Libraries 177 DM1000 Version 2—Owner’s Manual Libraries 15 Output Patch Library The Output P atch library enables you to stor e and recall all Output P atch settings. The librar y contains one preset memory and 32 user (readable & wr itable) memories.
178 Chapter 15—Libraries DM1000 Version 2—Owner’s Manual Each Effects proc essor features the librar y pages listed belo w : • In ter nal Effects Processor 1 Library ........... FX1 Lib page • In ter nal Effects Processor 2 Library .........
Using Libraries 179 DM1000 Version 2—Owner’s Manual Libraries 15 • Delays • Modulation-based Effects • Guitar Effects • Dynamic Effects • Combination Effects No. Preset Name Type Description 8 Mono Delay MONO DELAY Simple mono delay 9 Stereo Delay STEREO DELAY Simple stereo delay 10 Mod.
180 Chapter 15—Libraries DM1000 Version 2—Owner’s Manual • Others • Add-On Effects 3. These preset programs are dedicated to Add-On Effects. The numbers of effects programs that do not have Add-On Effects installed are grayed out and cannot be used.
Using Libraries 181 DM1000 Version 2—Owner’s Manual Libraries 15 Bus to Stereo Library Y ou can stor e Bus to Ster eo settings (levels and panpots of signals routed from Bus Outs 1–8 to the Stereo Bus). The libr ar y contains one pr eset memor y and 32 user (readable & writ- able) memories.
182 Chapter 15—Libraries DM1000 Version 2—Owner’s Manual A CURRENT TYPE This parameter displays the curre ntly-selected channel gate type (Gate or Ducking).
Using Libraries 183 DM1000 Version 2—Owner’s Manual Libraries 15 A CURRENT TYPE This parameter displays the curre ntly-selected channel comp type (Compressor , Expander , C ompander Soft, C ompander Hard). B CURRENT CURVE This graph displays the current compr essor cur ve.
184 Chapter 15—Libraries DM1000 Version 2—Owner’s Manual EQ Library This librar y enables you to st ore and recall EQ settings for Input Channels, Bus Outs 1–8, A ux Outs 1–8, and Ster eo Out. The librar y contains 40 preset memories and 160 user (read- able & wr itable) memories.
Using Libraries 185 DM1000 Version 2—Owner’s Manual Libraries 15 A CURRENT TYPE This parameter displays the curre ntly-selected channel EQ ty pe (TYPE I or II). B CURRENT CURVE This graph displays the current EQ curve. C Level meters These meters indicate the post-EQ lev els of the currently-selected channel and its a vail- able pair partn er .
186 Chapter 15—Libraries DM1000 Version 2—Owner’s Manual Surround Monitor Library This librar y enables you to st ore and recall S urround Monit or settings. The library contains one preset memory that initializes the Surround M onitor settings, and 32 user (readable & wr itable) memories.
Automix 187 DM1000 Version 2—Owner’s Manual Automix 16 16 Automix This chapter describes the A utomix function, which automat es real-time mix operation, and explains how t o use it.
188 Chapter 16—Automix DM1000 Version 2—Owner’s Manual Setting Up for Automix Recording This section describes the procedur e you must perform before y ou start A utomix recor ding. Selecting the T imecode Source Fo llow the steps below t o select the timecode sourc e and frame rate that the DM1000 uses for the A utomix function.
Setting Up for Automix Recording 189 DM1000 Version 2—Owner’s Manual Automix 16 4 If you select MIDI CLOCK, press the DISPLA Y ACCESS [SETUP] button repeat- edly until the Setup | MIDI/Host page appears (see page 246). Then, in the Rx PORT parameter box, specify the port or slot that receives MIDI Clock.
190 Chapter 16—Automix DM1000 Version 2—Owner’s Manual Recording an Automix This section describes a general procedure for A utomix recor ding, including creating a new Au to mix, as well as r ecording the fader , [ON] button, and other controller events r eal-time.
Recording an Automix 191 DM1000 Version 2—Owner’s Manual Automix 16 • PA N ................................ Pan operation • SURR ............................. Surround pan operation • AU X ................................ Aux Send lev el operation • A UX ON .
192 Chapter 16—Automix DM1000 Version 2—Owner’s Manual 5 Adjust the faders, Encoders, [ON] buttons, and other controls of the channels selected in Step 3. 6T o record EQ events, use the SELECTED CHANNEL section to edit the EQ set- tings of the currently-selected channel.
Inserting Mix Parameters into Automix 193 DM1000 Version 2—Owner’s Manual Automix 16 Inserting Mix Parameters into Automix Y ou can insert the static mix parameter settings into the range specified by the IN and OUT parameters in the current A utomix data.
194 Chapter 16—Automix DM1000 Version 2—Owner’s Manual 3 Press the DISPLA Y ACCESS [REMOTE] button repeatedly until the Remote | Machine page appears. 4 Assign the Insert In and Out Locate points to the Locate memories specified in the LOCA TE/TIME section (page 244) and selected in Step 2.
Inserting Mix Parameters into Automix 195 DM1000 Version 2—Owner’s Manual Automix 16 7 Use the cursor buttons to select YES, then press [ENTER]. The DM1000 enters Insert mode, and the INSER T button is highlighted.
196 Chapter 16—Automix DM1000 Version 2—Owner’s Manual Parameter Recording The following table summarizes the parameter recor ding operation for each parameter av ailable in A utomix recor ding.
Punching In & Out 197 DM1000 Version 2—Owner’s Manual Automix 16 Punching In & Out Y ou can modify part of a recor ded A utomix or add events t o an A utomix (Punc h In & Out). Y ou can punch in and out channels using the [SEL] butt ons, or individual parameters using other controls.
198 Chapter 16—Automix DM1000 Version 2—Owner’s Manual 5 Per form the following operations to punch in and out individual events. 6 Stop the Automix.
[SEL] Button Functions While the [AUTO] Button Indicator Is On 199 DM1000 Version 2—Owner’s Manual Automix 16 [SEL] Button Functions While the [AUTO] Button Indicator Is On W hile the [A UTO] butt.
200 Chapter 16—Automix DM1000 Version 2—Owner’s Manual Automix Main Page This section explains the A utomix M ain page. This page enables you to set the basic A uto- mix parameters and rec ord and pla y back A utomix es. T o locat e the A utomix | M ain page, press the DISPLA Y A CCESS [A UTOMIX] button r epeatedly until the page appears.
Automix Main Page 201 DM1000 Version 2—Owner’s Manual Automix 16 Wh en the T O END button is on, the way in which fader ev ents are proc essed depends on the currently-selected Fader Edit mode and Edit Out mode. The following table shows ho w the faders operate when the Fader Edit mode is set to Absolute.
202 Chapter 16—Automix DM1000 Version 2—Owner’s Manual The following table shows ho w faders move in eac h Edit Out mode. Y ou can set the Re turn Time (time r equired by Input and Output Channel faders t o return to the pre- v iously-rec orded position) on the Fader1 or 2 page (see page 205).
Automix Main Page 203 DM1000 Version 2—Owner’s Manual Automix 16 J OVERWRITE section This section enables you t o select parameters to be rec orded on the first pass, and rere- co rd ed (i.e., ov erw ritten) on subsequent passes. Y ou can select or deselect these param- eters while rec ording is in progress (see page 190).
204 Chapter 16—Automix DM1000 Version 2—Owner’s Manual R STOP Mo ve the cursor to this button, then press [ENTER] to stop A utomix r ecording or pla y- back. (If you st op recor ding, a c onfirmation w indow appears asking whether y ou wish to update the A utomix data.
Fader1 &2 pages 205 DM1000 Version 2—Owner’s Manual Automix 16 I FREE This parameter displays the amount of free memor y available for st oring the cur rent Au to mix. J MEMORY This parameter displays the siz e of the A utomix memor y selected in the c enter column.
206 Chapter 16—Automix DM1000 Version 2—Owner’s Manual B MOTOR This button turns the fader motors on or off for A utomix pla yback. The button is high- lighted when the motors are on. C Edit Safe buttons The numbered butt ons below each fader bar ar e Edit Safe buttons, which prohibit A uto- mix reco rding on certain channels.
Editing Events Offline 207 DM1000 Version 2—Owner’s Manual Automix 16 Editing Events Offline Y ou can edit rec orded A utomix ev ents offline on the Ev ent Job and E vent Edit pages. Y ou can perform offline editing only while the A utomix function is stopped.
208 Chapter 16—Automix DM1000 Version 2—Owner’s Manual 4 Move the cursor to the desired Job button in the Job T ype section, then press [ENTER]. The following Jobs ar e available. Certain Jobs feature an e xtra par ameter belo w the TIME SETTING section.
Editing Events Offline 209 DM1000 Version 2—Owner’s Manual Automix 16 ■ MOVE/MERGE The function of this button changes depending on the SOUR CE section setting. If you select CURRENT (current A utomix) in the SOUR CE section, this button bec omes the MO VE button, which mov es the specified range of A utomix data t o another position.
210 Chapter 16—Automix DM1000 Version 2—Owner’s Manual -T r im amount This parameter specifies the trim amount in the r ange of –96 dB to +96 dB. 5 After setting all necessary parameters, move the cursor to the EXEC button, then press [ENTER].
Editing Events Offline 211 DM1000 Version 2—Owner’s Manual Automix 16 6T o execute the selected Job, move the cursor to the EXEC button, then press [ENTER]. A confirmation window appears. M ove the cursor t o the YES button, then press [ENTER] to execut e the Job .
212 Chapter 16—Automix DM1000 Version 2—Owner’s Manual E SELECTED CH Wh en this option is on, only events of the channels cur rently selected b y the channel [SEL] buttons are displa yed in the list. F Event select buttons These buttons select the ty pe of events to be displa yed in the ev ent list.
Editing Events Offline 213 DM1000 Version 2—Owner’s Manual Automix 16 3T o duplicate or delete events, select an event by moving the triangular icon ( ® ® ® ® ) to the event in the list, then select the DUPLICA TE or DELETE button.
214 Chapter 16—Automix DM1000 Version 2—Owner’s Manual.
Remote Control 215 DM1000 Version 2—Owner’s Manual Remote Control 17 17 Remote Control This chapter describes the R emote function, which enables you t o control e xternal equip- ment directly fr om the DM1000 top panel.
216 Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual Pro T ools Remote Layer The DM1000 features R emote La yer 1 and 2 targets especially designed for controlling P ro To ols.
Pro Tools Remote Layer 217 DM1000 Version 2—Owner’s Manual Remote Control 17 4 Launch Pro T ools. 5 Choose OMS Studio Setup from the Setups menu, and configure OMS as nec- essary . Re fer to the documentation that came w ith OMS for more information on configuring the OMS Studio Setup menu.
218 Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual Configuring the DM1000 Fo llow the steps below t o set up the DM1000 so that you can r emotely contr ol Pro T ools from the DM1000 R emote La yer 1. 1 Press the DISPLA Y ACCESS [SETUP] button repeatedly until the Setup | MIDI/Host page appears.
Pro Tools Remote Layer 219 DM1000 Version 2—Owner’s Manual Remote Control 17 6 Select ProT ools (as the target device) for the T arget parameter ( 2 ) located in the upper-right corner of the page. By default, R emote Laye r 1 target is set to Pr oT ools.
220 Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual Display W hile the Pr o T ools layer is select ed, you can use the [F2]–[F4] buttons as w ell as the left and right [ ]/[ ] T ab Scroll buttons to select displa y modes.
Pro Tools Remote Layer 221 DM1000 Version 2—Owner’s Manual Remote Control 17 E INSERT ASSIGN/EDIT section This section enables you t o inser t pl ug-ins into P ro T ools channels and adjust plug-in settings. U se the left and rig ht [ ]/[ ] T ab Scroll buttons to change the paramete rs display ed in this section.
222 Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual ■ Meter Display mode ( [F4] button) Pr ess the [F4] button to select this displa y mode, in which the level meters for tracks 1–16 are displa yed. • Channels 1–16 ............
Pro Tools Remote Layer 223 DM1000 Version 2—Owner’s Manual Remote Control 17 ■ AUX SELECT Section • [AUX 1]–[AUX 5] buttons These buttons select Sends A–E so that you can adjust the c orresponding Pro T ools channel send level.
224 Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual ■ SELECTED CHANNEL Section • ROUTING [1] button Selects the previous track to be controlled by the J oystick. • ROUTING [2] button Selects the next track to be contr olled by the Jo ystick.
Pro Tools Remote Layer 225 DM1000 Version 2—Owner’s Manual Remote Control 17 ■ USER DEFINED KEYS section • [1]–[12] buttons Y ou can assign one of 164 parameters to each of these buttons.
226 Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual DAW MONI ST A TUS Pressing the key (to which this function is assigned) enables you to view the current monitoring mode and the channel strip type.
Pro Tools Remote Layer 227 DM1000 Version 2—Owner’s Manual Remote Control 17 Selecting Channels To select a sing le Pr o T ools channel, pr ess the [SEL] button that co rresponds to the desired c hannel.
228 Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual Configuring Sends A–E as Pre or Post Y ou can set Pr o T ools channels for the selected Sends (A–E) to pr e or post. 1 Press the AUX SELECT [AUX 1]–[AUX 5] buttons to select the desired Sends (A–E).
Pro Tools Remote Layer 229 DM1000 Version 2—Owner’s Manual Remote Control 17 3 Use the faders, Encoders, and [ON] buttons to control the currently-selected send. Fo r stereo A ux input channels, you can set the left and right panpots individually .
230 Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual 7 Press [ENTER] to confirm the assignment. Re peat Steps 6 and 7 to assign more plug-ins to other insert positions in the channel strip. 8 In the same way , assign plug-ins to other channels.
Pro Tools Remote Layer 231 DM1000 Version 2—Owner’s Manual Remote Control 17 6 Move the cursor to a parameter control, then rotate the Parameter wheel or press the [ENTER] button to adjust the value. One or two parameters ar e assigned to a single par ameter c ontrol.
232 Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual Scrub & Shuttle By assigning the DA W SCR UB parameter to one of the U ser Defined buttons [1]–[12], you can scrub Pro T ools tracks back and forth by turning the Paramete r wheel.
Pro Tools Remote Layer 233 DM1000 Version 2—Owner’s Manual Remote Control 17 Automation Y ou can view the Pro T ools A utomation mode as follo ws: 1 Press the [F3] or [F4] button to display the channels for remote control. 2 Press the DISPLA Y ACCESS [AUTOMIX] button.
234 Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual Using the Panner ■ Selecting a T rack U se the SELECTED CHANNEL ROUTING buttons t o manipulate the following track operations.
Nuendo/Cubase SX Remote Layer 235 DM1000 Version 2—Owner’s Manual Remote Control 17 Nuendo/Cubase SX Remote Layer Y ou can remot ely control N uendo and Cubase SX using R emote La yers 1 and 2. ■ Configuring Computers 1 Connect the DM1000 to your computer using a USB cable, and install the required USB driver included on the DM1000 CD-ROM.
236 Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual MIDI Remote Layer If y ou select USER DEFINED as the target for Remote La yer 1 or 2, you can remotely c ontrol the parameters of ex.
MIDI Remote Layer 237 DM1000 Version 2—Owner’s Manual Remote Control 17 2 Press the DISPLA Y ACCESS [SETUP] button repeatedly until the Setup | MIDI/Host page appears. 3 Move the cursor to the REMOTE 2 parameter box ( 1 ) in the SPECIAL FUNC- TIONS section, rotate the Parameter wheel to select MIDI, then press [ENTER].
238 Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual D ID, SHORT , LONG These parameters display the c hannel names. The ID paramet er displays the channel ID (RM01–RM16) for the currently-controlled MIDI device.
MIDI Remote Layer 239 DM1000 Version 2—Owner’s Manual Remote Control 17 Assigning MIDI Messages to Channel Controls Y ou can quickly use the MIDI R emote function if you use the fact or y presets in the banks. Ho we ve r, you can also assign the desired MIDI messages t o the faders, [ON] butt ons, or Encoders.
240 Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual 6 Press and hold down the MIDI keyboard foot switch. The MIDI Hold On message is assigned in the D A T A parameter bo x. MIDI messages are described below: • 00–7F ...............
MIDI Remote Layer 241 DM1000 Version 2—Owner’s Manual Remote Control 17 9 Move the cursor to the LA TCH/UNLA TCH button, then press [ENTER] to select LA TCH or UNLA TCH depending on how you want the [ON] buttons to function. • LA TCH ...........
242 Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual Machine Control Function The DM1000 can control the transport functions and select tracks on external recor ding machines that support MMC and the P2 protoc ol by transmitting commands via the MIDI OUT port and REMOTE co nnector respectiv ely .
Machine Control Function 243 DM1000 Version 2—Owner’s Manual Remote Control 17 3 Press the DISPLA Y ACCESS [SETUP] button repeatedly until the Setup | MIDI/Host page appears. 4 Move the cursor to either the MMC button or P2 button in the MACHINE CONTROL section ( 1 ) to specify the remote control method, then press the [ENTER] button.
244 Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual 7T o start remote control, press the DISPLA Y ACCESS [REMOTE] button, then press the [F3] button to display the Remote | Machine page. This page contains the follo wing par ameters: A LOCA TE/TIME section This section enables you t o set the locate points.
MIDI 245 DM1000 Version 2—Owner’s Manual MIDI 18 18 MIDI This chapter describes the DM1000’ s MIDI-related functions. MIDI & the DM1000 U sing Control Changes, Program Chang es, and other MIDI messages enables you to re call Scenes and edit parameters on the DM1000, and store DM1000 internal data on external MIDI dev ices.
246 Chapter 18—MIDI DM1000 Version 2—Owner’s Manual • USB port This port is used to connect a co mputer and transfer MIDI messages. This is a multiport interface that transmits and rec eives up t o eight-por t data (16 channels x 8 ports).
MIDI Port Setup 247 DM1000 Version 2—Owner’s Manual MIDI 18 • Rx POR T ....................... This parameter specifies a port for gener al MIDI data rece p- tion. In the left parameter bo x, select MIDI, USB, SL O T1, or REMOTE. If you select USB , specify the port number in the rig ht parameter bo x.
248 Chapter 18—MIDI DM1000 Version 2—Owner’s Manual Selecting MIDI Messages for T ransmission and Reception Y ou can select MIDI messages to be transmitted or r eceiv ed at a port specified in the GEN- ERAL section on the Setup | MIDI/Host page (see page 246).
Assigning Scenes to Program Changes for Remote Recall 249 DM1000 Version 2—Owner’s Manual MIDI 18 • Tx ON/OFF ................... T ransmission of Parameter Change messages is enabled or dis- abled. • Rx ON/OFF ................... R eception of Parameter Change messages is enabled or disabled.
250 Chapter 18—MIDI DM1000 Version 2—Owner’s Manual 4 Move the cursor to a parameter box in the PGM CHG column, and rotate the Parameter wheel or press the [INC]/[DEC] buttons to select the Program Change numbers to which you want to assign Scenes.
Assigning Parameters to Control Changes for Real-time Control 251 DM1000 Version 2—Owner’s Manual MIDI 18 4 Move the cursor to the MODE parameter’ s T ABLE button ( 1 ), then press [ENTER]. The MODE parameter determines which MIDI messages are transmitted when DM1000 parameters are adjust ed.
252 Chapter 18—MIDI DM1000 Version 2—Owner’s Manual ON CHANNEL INPUT1–48 MASTER BUS1–8/AUX1–8/STEREO AUX1 SEND INPUT1–48 AUX2 SEND AUX3 SEND AUX4 SEND AUX5 SEND AUX6 SEND AUX7 SEND AUX8 .
Assigning Parameters to Control Changes for Real-time Control 253 DM1000 Version 2—Owner’s Manual MIDI 18 EQ ON INPUT1–48/BUS1–8/AUX1–8/STEREO Q LOW F LOW G LOW H G LOW L Q LO-MID F LO-MID G.
254 Chapter 18—MIDI DM1000 Version 2—Owner’s Manual Pa r ameters that feature a setting range of more than 128 steps (such as F ader and Delay T ime parameters) require tw o or more Co ntr ol Change messages to specify the values.
Assigning Parameters to Control Changes for Real-time Control 255 DM1000 Version 2—Owner’s Manual MIDI 18 If you wish to control Dela y Time paramete rs on certain channels using Control Changes, .
256 Chapter 18—MIDI DM1000 Version 2—Owner’s Manual Controlling Parameters by Using Parameter Changes Y ou can contr ol DM1000 parameters in real time by using P arameter Change messages that are S ystem Ex clusive messages, instead of using MIDI Control Changes.
Transmitting Parameter Settings via MIDI (Bulk Dump) 257 DM1000 Version 2—Owner’s Manual MIDI 18 The MIDI | Bulk page appears. The page includes the following parameters: A CA TEGORY section This section enables you t o select data for transmission and reception.
258 Chapter 18—MIDI DM1000 Version 2—Owner’s Manual • SETUPMEM ................. This butt on selects the DM1000 setup data (i.e., system set- tings). • PGM T ABLE ................. This button selects the MIDI | Pgm Asgn page settings. • CTL T ABLE .
Controlling the DM1000 from a Video Editor 259 DM1000 Version 2—Owner’s Manual Controlling the DM1000 from a Video Editor 19 19 Controlling the DM1000 from a V ideo Editor This chapter describes the contr ol functions, which enable y ou to c ontrol the DM1000 from a video editor using the ESAM protoc ol.
260 Chapter 19—Controlling the DM1000 from a Video Editor DM1000 Version 2—Owner’s Manual Crossfade via ESAM Commands This section describes how to ex ecute a crossfade (transition) using the DM1000’ s ESAM mode. 1 Press the DISPLA Y ACCESS [SETUP] button repeatedly until the Setup | Remote page appears.
Crossfade via ESAM Commands 261 DM1000 Version 2—Owner’s Manual Controlling the DM1000 from a Video Editor 19 4 Press the DISPLA Y ACCESS [SETUP] button repeatedly until the Setup | Time Ref page appears. 5 Move the cursor to the FRAMES parameter , then select the desired frame rate.
262 Chapter 19—Controlling the DM1000 from a Video Editor DM1000 Version 2—Owner’s Manual 9 Move the cursor to the MOTOR button, then press [ENTER] to turn the motor faders on or off. Wh en the MO TOR butt on is turned off, the mot or faders w ill not mov e even when the DM1000 recei ves the ESAM c ommands.
Crossfade via ESAM Commands 263 DM1000 Version 2—Owner’s Manual Controlling the DM1000 from a Video Editor 19 13 Set the pre-crossfade FROM machine level (the fader’ s initial value) and the post-crossfade TO machine level (the fader’ s target value).
264 Chapter 19—Controlling the DM1000 from a Video Editor DM1000 Version 2—Owner’s Manual V ideo Editors with confirmed compatibility As of June 2004, we hav e confirmed that this system operates co rrectly with the follow ing vid eo e ditors.
Other Functions 265 DM1000 Version 2—Owner’s Manual Other Functions 20 20 Other Functions This chapter describes the DM1000’ s miscellaneous functions. Changing the Input and Output Connector Names Y ou can change the default name of the input and output connectors, if you desir e.
266 Chapter 20—Other Functions DM1000 Version 2—Owner’s Manual Changing the Output Connector Names To change output c onnector names, press the DISPLA Y A CCESS [SETUP] button repeat- edly until the Setup | Out P or t page appears.
Setting Preferences 267 DM1000 Version 2—Owner’s Manual Other Functions 20 • Auto P AN/SURROUND Display If this check box is on, the Pan/S urr pages appear automatically when you operate the J oy- stick in the SELECTED CHANNEL section. If you want t o use the Jo ystick to adjust the pan setting, turn on this check bo x.
268 Chapter 20—Other Functions DM1000 Version 2—Owner’s Manual • Initial Data Nominal If this check bo x is on, Input Channel faders ar e set t o nominal (0 dB) when you recall Sc ene #0.
Setting Preferences 269 DM1000 Version 2—Owner’s Manual Other Functions 20 B Port ID/PORT This parameter selects a format for the port name displayed on the pages. W hen the P or t ID check bo x is on, the P ort ID (such as AD1 or OMN10) appears. When the P ort Shor t N ame check box is on, the Shor t P ort name appears (see page 266).
270 Chapter 20—Other Functions DM1000 Version 2—Owner’s Manual Prefer3 page This page enables you t o set various A utomix pr eferences. This page contains the follo wing par ameters. ( These par ameters ar e explained in the order from the to p of the left column to the bottom of the rig ht column).
Setting Preferences 271 DM1000 Version 2—Owner’s Manual Other Functions 20 • Automix Store Undo If this check box is on, you can undo the A utomix St ore & Clear functions.
272 Chapter 20—Other Functions DM1000 Version 2—Owner’s Manual Creating a Custom Layer by Combining Channels (User Assignable Layer) If you set the R emote Lay er target to “USER ASSIGN ABLE, ” you can cr eate a custom la yer by co mbining any DM1000 channels (ex cluding the Ster eo Out).
Using the Oscillator 273 DM1000 Version 2—Owner’s Manual Other Functions 20 Using the Oscillator The DM1000 features an Oscillator y ou can use for sound checks. Follo w the steps below t o use the Oscillator: 1 Press the DISPLA Y ACCESS [UTILITY] button, then press the [F1] button.
274 Chapter 20—Other Functions DM1000 Version 2—Owner’s Manual 5 Move the cursor to the OSCILLA TOR ON/OFF button, then press the [ENTER] or [INC]/[DEC] buttons to turn on the Oscillator . The Oscillator signal is now rout ed to the channels select ed in the ASSIGN section.
Using the User Defined Keys 275 DM1000 Version 2—Owner’s Manual Other Functions 20 2 Move the cursor to the desired BANK parameter button, then press [ENTER]. The corresponding bank is select ed, and the functions assigned to the U ser Defined buttons in that bank are displa yed in the 1–12 parameter bo x es.
276 Chapter 20—Other Functions DM1000 Version 2—Owner’s Manual Using GPI (General Purpose Inter face) The DM1000’ s CONTROL port provides a GPI (General Purpose Inte rface) for contr olling ex ter nal equipment.
Using GPI (General Purpose Interface) 277 DM1000 Version 2—Owner’s Manual Other Functions 20 2T o assign functions to the incoming trigger signals, move the cursor to one of four trigger signal parameters 1–4 in the INPUT section.
278 Chapter 20—Other Functions DM1000 Version 2—Owner’s Manual At this time, the trigger signal is output from the CONTROL port when you operate the assigned parameters or controls. ■ Parameters available in the INPUT section • T ALKBA CK/DIMMER .
Using GPI (General Purpose Interface) 279 DM1000 Version 2—Owner’s Manual Other Functions 20 • xxx UNLA T CH ............. The assig ned button function is enabled only while the incom- ing trigger sig nal is activ e. • xxx ON ................
280 Chapter 20—Other Functions DM1000 Version 2—Owner’s Manual Using Operation Lock The DM1000 features an Operation Lock function that prevents unint entional edits and r estricts acc ess to panel operation with a password.
Using Operation Lock 281 DM1000 Version 2—Owner’s Manual Other Functions 20 C P ASSWORD This button enables y ou to change the current passwor d. Mo ve the cursor to the P ASS- W ORD button, then press [ENTER]. The Set P assword window appears, enabling you to change the password.
282 Chapter 20—Other Functions DM1000 Version 2—Owner’s Manual Cascading Consoles The DM1000 features a Cascade Bus that enables cascade c onnection. Y ou can connect two DM1000s in cascade using the digital inputs and outputs, or the OMNI IN and OMNI OUT connect ors.
Cascading Consoles 283 DM1000 Version 2—Owner’s Manual Other Functions 20 The following paragr aphs explain how t o make a cascade c onnection using two DM1000s and the inputs and outputs of digital I/O cards installed in the slots of two DM1000s.
284 Chapter 20—Other Functions DM1000 Version 2—Owner’s Manual 4 Assign the Bus signals to the slot channels that are used for the cascade con- nection.
Cascading Consoles 285 DM1000 Version 2—Owner’s Manual Other Functions 20 7 On the master unit, press the DISPLA Y ACCESS [DIO] button repeatedly until the DIO | Cascade page appears, then adjust the Attenuators using the parameter controls.
286 Chapter 20—Other Functions DM1000 Version 2—Owner’s Manual 10 Repeat Steps 8 and 9 for the master unit so that it will be able to transmit and receive MIDI messages via the REMOTE connector . 11 T o match the parameters of both DM1000s, locate the Setup | MIDI/Host page on the copy source unit.
Using the AD8HR/AD824 287 DM1000 Version 2—Owner’s Manual Other Functions 20 Using the AD8HR/AD824 The Y amaha AD8HR/AD824, an 8-channel AD con verter , enables y ou to contr ol its gain and phantom po wer from a c onnected DM1000. The DM1000 can contr ol up to four AD8HR/AD824s simultaneously .
288 Chapter 20—Other Functions DM1000 Version 2—Owner’s Manual 3 Press the DISPLA Y ACCESS [SETUP] button repeatedly until the Setup | Remote page appears. This page contains the follo wing par ameters: A REMOTE FUNCTION This parameter selects a device to be co nnected to the DM1000 REMO TE connect or .
Checking the Battery and the System Version 289 DM1000 Version 2—Owner’s Manual Other Functions 20 Checking the Battery and the System V ersion The Utility | Battery page enables you to check the c ondition of the internal mem- or y-backup battery and the system version number .
290 Chapter 20—Other Functions DM1000 Version 2—Owner’s Manual 3T o reset the DM1000 to factory default settings, move the cursor to the INI- TIALIZE button, then press [ENTER]. To canc el the initialization operation, mov e the cursor to the CANCEL button, then press [ENTER].
Calibrating the Faders 291 DM1000 Version 2—Owner’s Manual Other Functions 20 5 When the calibration operation is complete, the DM1000 displays a window in which you can select faders for position adjustment. If you selected “2 F ADER MO VE ONL Y” in Step 3, the fader adjustment is complete.
292 Chapter 20—Other Functions DM1000 Version 2—Owner’s Manual 11 If there is any problem with the calibration result, the DM1000 displays the following window . Also, the c hannel [SEL] button indicator of a pr oblematic fader flashes. U se the cursor buttons to select one of the following three options, then press[ENTER].
USER DEFINED KEYS 293 DM1000 Version 2—Owner’s Manual Appendix Appendix A: Parameter Lists USER DEFINED KEYS # Function Display 0 No Assign No Assign 1 Scene MEM. Recall +1 Scene +1 Recall 2 Scene MEM. Recall -1 Scene -1 Recall 3 Scene MEM. Recall No.
294 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual 115 T alkback Assign OMNI OUT XX T alkback OMNI XX 116 Channel Name ID/Short CH ID/Short 117 Port Name ID/Short Port D/Short 118 Cha.
USER DEFINED KEYS Initial Assignments 295 DM1000 Version 2—Owner’s Manual Appendix USER DEFINED KEYS Initial Assignments BANK A BANK B BANK C BANK D TITLE Surround Monitor Scene Recall Group Enable Automix 1 Snap to SPL85 Scene 1 Recall IN Fader Group A Automix ENABLE 2 Bass Manage ON Scene 2 Recall IN Mute Group I Overwrite F ADER 3 Surr .
296 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual Input Patch Parameters INPUT INSERT IN EFFECT IN CASCADE Port ID Description Port ID Description Port ID Description Port ID Descrip.
Input Patch Parameters 297 DM1000 Version 2—Owner’s Manual Appendix FX1-2 Effect1 OUT 2 FX1-2 Effect1 OUT 2 INS CH46 InsertOut-CH46 2D1R 2TR IN Dig.1 R FX1-3 Effect1 OUT 3 FX1-3 Effect1 OUT 3 INS CH47 InsertOut-CH47 2D2L 2TR IN Dig.2 L FX1-4 Effect1 OUT 4 FX1-4 Effect1 OUT 4 INS CH48 InsertOut-CH48 2D2R 2TR IN Dig.
298 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual Initial Input Patch Settings CHANNEL EFFECT IN P A TCH CASCADE IN P A TCH EFFECT TYPE 1 AD1 2 AD2 3 AD3 4 AD4 5 AD5 6 AD6 7 AD7 8 AD.
Initial Input Patch Settings 299 DM1000 Version 2—Owner’s Manual Appendix CHANNEL NAME CHANNEL ID SHORT LONG CH1 CH1 CH1 CH1 CH2 CH2 CH2 CH2 CH3 CH3 CH3 CH3 CH4 CH4 CH4 CH4 CH5 CH5 CH5 CH5 CH6 CH6.
300 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual Output Patch Parameters SLOT , OMNI INSERT IN DIRECT OUT 2TR OUT Digital Source Description Source Description Source Description So.
Output Patch Parameters 301 DM1000 Version 2—Owner’s Manual Appendix INSCH36 InsertOut-CH36 FX1-2 Effect1 OUT 2 — — INSCH36 InsertOut-CH36 INSCH37 InsertOut-CH37 FX1-3 Effect1 OUT 3 — — IN.
302 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual Initial Output Patch Settings SLOT OMNI OUT CAS AUX8 Cascade Out Aux8 — — — — — — CAS ST_L Cascade STEREO_L — — — .
Initial Output Patch Settings 303 DM1000 Version 2—Owner’s Manual Appendix DIRECT OUT 2TR OUT Digital CHANNEL NAME 1 SLOT1-1 2 SLOT1-2 3 SLOT1-3 4 SLOT1-4 5 SLOT1-5 6 SLOT1-6 7 SLOT1-7 8 SLOT1-8 9.
304 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual GPI T rigger Sour ce & T arget List INPUT #T arget 0 NO ASSIGN 1T ALKBACK 3 DIMMER 4 BUS 5 SLOT 6 2TRD1 7 2TRD2 8T ALKBACK UNLA .
GPI Trigger Source & Target List 305 DM1000 Version 2—Owner’s Manual Appendix OUTPUT #T arget 0 NO ASSIGN 1 CH1 FADER ON 2 CH2 FADER ON 3 CH3 FADER ON 4 CH4 FADER ON 5 CH5 FADER ON 6 CH6 FADER.
306 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual User Defined Remote Layer Initial Bank Settings Bank 1 (GM V ol & Pan) ID Name Controller Data Format Short Long 123456789 1 0 .
User Defined Remote Layer Initial Bank Settings 307 DM1000 Version 2—Owner’s Manual Appendix Bank 2 (GM V ol & Effect 1) ID Name Controller Data Format Short Long 123456789 1 0 1 1 1 2 1 3 1 4.
308 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual Bank 3 (XG V ol & Pan) ID Name Controller Data Format Short Long 123456789 1 0 1 1 1 2 1 3 1 4 1 5 1 6 RM01 XG01 XG-CH01 VOL&.
User Defined Remote Layer Initial Bank Settings 309 DM1000 Version 2—Owner’s Manual Appendix Bank 4 (Nuendo VST Mixer) ID Name Controller Data Format Short Long 123456789 1 0 1 1 1 2 1 3 1 4 1 5 1.
310 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual Effects Parameters REVERB HALL, REVERB ROOM, REVERB ST AGE, REVERB PLA TE One input, two output hall, room, stage, and plate re ve rb simulations, all w ith gates. EARL Y REF . One input, two output early reflections.
Effects Parameters 311 DM1000 Version 2—Owner’s Manual Appendix MOD. DELA Y One input, two output basic repeat dela y with mod- ulation. DELA Y LCR One input, two output 3-tap delay (left, center , rig ht). ECHO Tw o input, tw o output stereo dela y with crossed feedback loop.
312 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual FLANGE Tw o input, tw o output flange effect. SYMPHONIC Tw o input, tw o output symphonic effect. PHASER Tw o input, tw o output 16-stage phaser . AUTO P AN Tw o input, tw o output autopanner .
Effects Parameters 313 DM1000 Version 2—Owner’s Manual Appendix HQ. PITCH One input, two output high-quality pitch shifter . DUAL PITCH Tw o input, tw o output pitch shifter . ROT ARY One input, two output rotary speaker simulat or . RING MOD. Tw o input, tw o output ring modulator .
314 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual AMP SIMULA TE One input, two output guitar amp simulator . DYNA. FIL TER Tw o input, tw o output dynamically contr olled filter . DYNA. FLANGE Tw o input, tw o output dynamically contr olled flanger .
Effects Parameters 315 DM1000 Version 2—Owner’s Manual Appendix REV ->CHORUS One input, two output rev erb and chorus effects in series. REV+FLANGE One input, two output rev erb and flanger effects in parallel. REV ->FLANGE One input, two output rev erb and flanger effects in series.
316 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual REV ->SYMPHO. One input, two output rev erb and sy mphonic effects in series. REV ->P AN One input, two output rev erb and autopan effects in parallel. DELA Y+ER. One input, two output delay and early r eflections effects in parallel.
Effects Parameters 317 DM1000 Version 2—Owner’s Manual Appendix DELA Y ->ER. One input, two output delay and early r eflections effects in series. DELA Y+REV One input, two output delay and r everb effects in parallel. Parameter Range Description DELA Y L 0.
318 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual DELA Y ->REV One input, two output delay and r everb effects in series. DIST ->DELA Y One input, two output distortion and delay effects in series. MUL TI FIL TER Tw o input, tw o output 3-band multi-filter (24 dB/octav e).
Effects Parameters 319 DM1000 Version 2—Owner’s Manual Appendix ST REVERB Tw o input, tw o output stereo r everb. REVERB 5.1 One input, six output reverb for 5.1 surround, with surround panning. OCT A REVERB Eig ht input, eight output reverb. AUTO P AN 5.
320 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual CHORUS 5.1 S ix input, six output chorus for 5.1 sur round. FLANGE 5.1 S ix input, six output flanger for 5.1 sur round. SYMPHO. 5.1 S ix input, six output sy mphonic effect for 5.1 sur- r ound.
Effects Parameters 321 DM1000 Version 2—Owner’s Manual Appendix COMP 5.1 S ix input, six output compressor for 5.1 surround, w ith individual solo for each band, and gain reduc- tion metering of left and rig ht (L+R), left surround and right sur round (LS+RS), cent er (C), or LFE c hannels.
322 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual Effects and tempo synchronization Some of the DM2000’ s effects allow you to sync hronize the effect with the tempo . Ther e are two such types of effect; delay-type effects and modulation-ty pe effects.
Preset EQ Parameters 323 DM1000 Version 2—Owner’s Manual Appendix Preset EQ Parameters #T itle Parameter LOW L-MID H-MID HIGH 01 Bass Drum 1 PEAKING PEAKING PEAKING H.SHELF G +3.5 dB –3.5 dB 0.0 dB +4.0 dB F 100 Hz 265 Hz 1.06 kHz 5.30 kHz Q 1.2 10 0.
324 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual Preset Gate Parameters (fs = 44.1 kHz) 27 Female V o. 1 PEAKING PEAKING PEAKING PEAKING G –1.0 dB +1.0 dB +1.5 dB +2.0 dB F 118 Hz 400 Hz 2.65 kHz 6.00 kHz Q 0.18 0.45 0.56 0.14 28 Female V o.
Preset Compressor Parameters (fs = 44.1 kHz) 325 DM1000 Version 2—Owner’s Manual Appendix Preset Compressor Parameters (fs = 44.1 kHz) #T itle T ype Parameter V alue 1 Comp COMP Threshold (dB) –8 Ratio ( :1) 2.5 Attack (ms) 60 Out gain (dB) 0.0 Knee 2 Release (ms) 250 2 Expand EXP AND Threshold (dB) –23 Ratio ( :1) 1.
326 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual 21 Strings3 COMP Threshold (dB) –17 Ratio ( :1) 1.5 Attack (ms) 76 Out gain (dB) 2.5 Knee 2 Release (ms) 186 22 BrassSection COMP Threshold (dB) –18 Ratio ( :1) 1.7 Attack (ms) 18 Out gain (dB) 4.
Dynamics Parameters 327 DM1000 Version 2—Owner’s Manual Appendix Dynamics Parameters The dynamics effects for each channel strip inc lude a Gate section (only for I nput Chan- nels) and a Comp section. The Gate section includes Gate and Ducking t ypes.
328 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual DUCKING Ducking is commonly used for v oice-ov er applications in which the background music level is reduc ed automatically when an announcer speaks.
Dynamics Parameters 329 DM1000 Version 2—Owner’s Manual Appendix COMP Section COMP The COMP proc essor attenuates signals abov e a specified THRESHOLD by a specified RA TIO . The COMP pr ocessor can also be used as a limiter , which, w ith a RA TIO of ∞ :1, re duces the level to the thr eshold.
330 Appendix A: Parameter Lists DM1000 Version 2—Owner’s Manual EXP AND An expander attenuat es signals below a specified THRESHOLD by a specified RA TIO . Parameter Range Description THRESHOLD (dB) –54.0 to 0.0 (541 points) This determines the level of input signal required to trigger the expander .
Dynamics Parameters 331 DM1000 Version 2—Owner’s Manual Appendix COMP ANDER HARD (H) COMP ANDER SOFT (S) The hard and soft c ompanders combine the effects of the compressor , e xpander and limiter . The companders function differently at the follo wing levels: 1 0 dB and higher .
332 Appendix B: Specifications DM1000 Version 2—Owner’s Manual Appendix B: Specifications General Spec Number of scene memories 99 Sampling Frequency Internal 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz External Normal rate: 44.1 kHz–10% to 48 kHz+6% Double rate: 88.
General Spec 333 DM1000 Version 2—Owner’s Manual Appendix Input Channel CH1–48 Input patch — Phase Normal/reverse Gate-type 3 On/off Key in: 12 ch Group (1–12, 13–24, 25–36, 37–48)/AUX1–8 Comp-type 4 On/off Key in: self /Stereo Link Pre EQ/pre fader/post fader Attenuator –96.
334 Appendix B: Specifications DM1000 Version 2—Owner’s Manual STEREO Comp-type 4 On/off Pre EQ/pre fader/post fader Attenuator –96.0 to +12.0 dB (0.
General Spec 335 DM1000 Version 2—Owner’s Manual Appendix EQ Parameters Gate Parameters Power Requirements U.S./Canada 120 V , 60 Hz 135 W Other 220–240 V , 50/60 Hz 135 W Dimensions (H x D x W) 200 x 585 x 436 mm (7.8" x 23.0" x 17.1") W ith MB1000 and SP1000 installed: 295 x 635 x 486 mm (11.
336 Appendix B: Specifications DM1000 Version 2—Owner’s Manual Comp Parameters Compressor Threshold –54 dB to 0 dB (0.1 dB step) Ratio (x :1) x=1, 1.1, 1.3, 1.5, 1.7, 2, 2.5, 3, 3.5, 4, 5, 6, 8, 10, 20, ∞ (16 points) Out gain 0 dB to +18 dB (0.
Libraries 337 DM1000 Version 2—Owner’s Manual Appendix Libraries Analog Input Spec In these specifications, when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms. All input AD converters (INPUT 1–16, OMNI INPUT 1–4, TALKBACK) are 24-bit linear, 128-times oversampling.
338 Appendix B: Specifications DM1000 Version 2—Owner’s Manual Digital Input Spec Digital Output Spec Input Format Data length Level Connector 2TR IN DIGIT AL 1 AES/EBU 24-bit RS422 XLR-3-31 type (Balanced) 1 1. XLR-3-31 type connectors are balanced (1=GND, 2=HOT, 3=COLD).
I/O Slot Spec (1–2) 339 DM1000 Version 2—Owner’s Manual Appendix I/O Slot Spec (1–2) Each I/O SL O T accepts a digital interfac e card. SL OT #1 has a serial interfac e. Control I/O Spec Maker Model Function INPUT OUTPUT 1 1. Selectable from STEREO/BUS/AUX/DIRECT/EXT INSERT/SURROUND MONITOR/CR MONITOR.
340 Appendix B: Specifications DM1000 Version 2—Owner’s Manual REMOTE Port CONTROL Port Pin Signal Pin Signal 1 GND 6 RX+/GND 1 2 RX–/RX– 1 1. RS422 (for AD8HR, AD824)/SONY 9 pin pro- tocol (P2), ESAM II 7 RTS/RX+ 1 3 TX–/TX+ 1 8 CTS/TX– 1 4 TX+/GND 1 9 GND 5 N.
Dimensions 341 DM1000 Version 2—Owner’s Manual Appendix Dimensions U nit: mm 436(Included Screw heads) 430(Not included Screw heads) 112 32 565 585 156 280 200 374 101 154 87 154 355.
342 Appendix B: Specifications DM1000 Version 2—Owner’s Manual Dimensions with the MB1000 and SP1000 installed: U nit: mm Specifications and descriptions in this owner’ s manual ar e for information pur poses only . Y amaha Corp . reserves the rig ht to change or modify pr oducts or specifications at any time w ithout prior notice.
Appendix C: MIDI 343 DM1000 Version 2—Owner’s Manual Appendix Appendix C: MIDI Scene Memory to Program Change T able Program Change # Initial Scene # User Scene # Program Change # Initial Scene # .
344 Appendix C: MIDI DM1000 Version 2—Owner’s Manual Initial Parameter to Control Change T able CHANNEL1 # High Mid Low 0 NO ASSIGN 1F ADER H CHANNEL INPUT1 2F ADER H CHANNEL INPUT2 3F ADER H CHAN.
Initial Parameter to Control Change Table 345 DM1000 Version 2—Owner’s Manual Appendix CHANNEL2 # High Mid Low 0 NO ASSIGN 1F ADER H CHANNEL INPUT25 2F ADER H CHANNEL INPUT26 3F ADER H CHANNEL INP.
346 Appendix C: MIDI DM1000 Version 2—Owner’s Manual CHANNEL3 # High Mid Low 0 NO ASSIGN 1E QG LOW H INPUT1 2E QG LOW H INPUT2 3E QG LOW H INPUT3 4E QG LOW H INPUT4 5E QG LOW H INPUT5 6E QG LOW H .
Initial Parameter to Control Change Table 347 DM1000 Version 2—Owner’s Manual Appendix CHANNEL4 # High Mid Low 0 NO ASSIGN 1E QG LOW H INPUT25 2E QG LOW H INPUT26 3E QG LOW H INPUT27 4E QG LOW H I.
348 Appendix C: MIDI DM1000 Version 2—Owner’s Manual CHANNEL5 # High Mid Low 0 NO ASSIGN 1E QG LO-MID H INPUT1 2E QG LO-MID H INPUT2 3E QG LO-MID H INPUT3 4E QG LO-MID H INPUT4 5E QG LO-MID H INPU.
Initial Parameter to Control Change Table 349 DM1000 Version 2—Owner’s Manual Appendix CHANNEL6 # High Mid Low 0 NO ASSIGN 1E QG LO-MID H INPUT25 2E QG LO-MID H INPUT26 3E QG LO-MID H INPUT27 4E Q.
350 Appendix C: MIDI DM1000 Version 2—Owner’s Manual CHANNEL7 # High Mid Low 0 NO ASSIGN 1E QG HI-MID H INPUT1 2E QG HI-MID H INPUT2 3E QG HI-MID H INPUT3 4E QG HI-MID H INPUT4 5E QG HI-MID H INPU.
Initial Parameter to Control Change Table 351 DM1000 Version 2—Owner’s Manual Appendix CHANNEL8 # High Mid Low 0 NO ASSIGN 1E QG HI-MID H INPUT25 2E QG HI-MID H INPUT26 3E QG HI-MID H INPUT27 4E Q.
352 Appendix C: MIDI DM1000 Version 2—Owner’s Manual CHANNEL9 # High Mid Low 0 NO ASSIGN 1E QG HIGH H INPUT1 2E QG HIGH H INPUT2 3E QG HIGH H INPUT3 4E QG HIGH H INPUT4 5E QG HIGH H INPUT5 6E QG H.
Initial Parameter to Control Change Table 353 DM1000 Version 2—Owner’s Manual Appendix CHANNEL10 # High Mid Low 0 NO ASSIGN 1E QG HIGH H INPUT25 2E QG HIGH H INPUT26 3E QG HIGH H INPUT27 4E QG HIG.
354 Appendix C: MIDI DM1000 Version 2—Owner’s Manual CHANNEL11 # High Mid Low 0 NO ASSIGN 1E QA TT H INPUT1 2E QA TT H INPUT2 3E QA TT H INPUT3 4E QA TT H INPUT4 5E QA TT H INPUT5 6E QA TT H INPUT.
Initial Parameter to Control Change Table 355 DM1000 Version 2—Owner’s Manual Appendix CHANNEL12 # High Mid Low 0 NO ASSIGN 1E QA TT H INPUT25 2E QA TT H INPUT26 3E QA TT H INPUT27 4E QA TT H INPU.
356 Appendix C: MIDI DM1000 Version 2—Owner’s Manual CHANNEL13 # High Mid Low 0 NO ASSIGN 1 SURROUND LFE H INPUT1 2 SURROUND LFE H INPUT2 3 SURROUND LFE H INPUT3 4 SURROUND LFE H INPUT4 5 SURROUND.
Initial Parameter to Control Change Table 357 DM1000 Version 2—Owner’s Manual Appendix CHANNEL14 # High Mid Low 0 NO ASSIGN 1 SURROUND LFE H INPUT25 2 SURROUND LFE H INPUT26 3 SURROUND LFE H INPUT.
358 Appendix C: MIDI DM1000 Version 2—Owner’s Manual CHANNEL15 # High Mid Low 0 NO ASSIGN 1 SURROUND LR INPUT1 2 SURROUND LR INPUT2 3 SURROUND LR INPUT3 4 SURROUND LR INPUT4 5 SURROUND LR INPUT5 6.
Initial Parameter to Control Change Table 359 DM1000 Version 2—Owner’s Manual Appendix CHANNEL16 # High Mid Low 0 NO ASSIGN 1 SURROUND LR INPUT25 2 SURROUND LR INPUT26 3 SURROUND LR INPUT27 4 SURR.
360 Appendix C: MIDI DM1000 Version 2—Owner’s Manual MIDI Data Format 1. DA T A FORMA T 1.1 CHANNEL MESSAGE 1.2 SYSTEM COMMON MESSAGE 1.3 SYSTEM REAL TIME MESSAGE 1.4 EXCLUSIVE MESSAGE 1.4.1 Real Time System Exclusive 1.4.2 System Exclusive Message 1.
MIDI Data Format 361 DM1000 Version 2—Owner’s Manual Appendix T ransmission If [TABLE] is selected, operating a parameter specified in the [Control assign ta- ble] will cause these messages to be transmitted if [Control Change Tx] is ON. The parameters that can be specified are defined in the Control Change Assign Parameter List.
362 Appendix C: MIDI DM1000 Version 2—Owner’s Manual T ransmission This message is transmitted on the [Tx CH] by key operations in the [MI- DI]-[BULK DUMP] screen. A bulk dump is transmitted on the [Rx CH] in response to a bulk dump request. The data area is handled by converting seven words of 8-bit data into eight words of 7-bit data.
MIDI Data Format 363 DM1000 Version 2—Owner’s Manual Appendix 2.12.2.6 User Defeined MIDI Remote bulk dump request format The second and third bytes of the DATA NAME indicate the bank number. 2.12.2.7 User Defined Keys bulk dump format The second and third bytes of the DATA NAME indicate the bank number.
364 Appendix C: MIDI DM1000 Version 2—Owner’s Manual 2.12.2.11 Control change table bulk dump format 2.12.2.12 Control change table bulk dump request format 2.12.2.13 Program change table bulk dump format 2.12.2.14 Program change table bulk dump request format 2.
MIDI Data Format 365 DM1000 Version 2—Owner’s Manual Appendix 2.12.2.17 Compressor library bulk dump format The second and third bytes of the DATA NAME indicate the library number.
366 Appendix C: MIDI DM1000 Version 2—Owner’s Manual 2.12.2.22 Effect library bulk dump request format The second and third bytes of the DATA NAME indicate the library number. (See above) 2.12.2.23 Channel library bulk dump format The second and third bytes of the DATA NAME indicate the library number.
MIDI Data Format 367 DM1000 Version 2—Owner’s Manual Appendix 2.12.2.28 Output patch library bulk dump request format The second and third bytes of the DATA NAME indicate the library number. (See above) 2.12.2.29 Bus to Stereo library bulk dump format The second and third bytes of the DATA NAME indicate the library number.
368 Appendix C: MIDI DM1000 Version 2—Owner’s Manual 2.12.2.33 Automix bulk dump format The second byte of the DATA NAME indicates the library number. 0:Library no.1 – 15:Library no.16, 256:current automix data 2.12.2.34 Automix bulk dump request format The second and third bytes of the DATA NAME indicate the library number.
MIDI Data Format 369 DM1000 Version 2—Owner’s Manual Appendix 2.12.3.1.2 Parameter Change basic format (Universal format) *) For parameters with a data size of 2 or more, data for that size will be transmitted. 2.12.3.1.3 Parameter request basic format 2.
370 Appendix C: MIDI DM1000 Version 2—Owner’s Manual 2.12.3.8 Parameter change (Backup memory) 2.12.3.9 Parameter request (Backup memory) 2.12.3.10 Parameter change (Function call: Library store / recall) Reception When this is received, the specified memory/library will be stored/recalled.
MIDI Data Format 371 DM1000 Version 2—Owner’s Manual Appendix 2.12.3.13 Parameter change (Function call: Scene/Library Clear) Reception When this is received, the specified memory/library will be cleared.
372 Appendix C: MIDI DM1000 Version 2—Owner’s Manual 2.12.3.18 Parameter change (Function call: pair , copy) Reception This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS. This is echoed if [Parameter change ECHO] is ON.
MIDI Data Format 373 DM1000 Version 2—Owner’s Manual Appendix 2.12.3.24 Parameter request (Remote Meter) Reception This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS. This is echoed if [Parameter change ECHO] is ON.
374 Appendix D: Options DM1000 Version 2—Owner’s Manual Appendix D: About Optional Product MB1000 Peak Meter Bridge Installing the Meter Bridge 1 Attach the brackets to the meter bridge.
MB1000 Peak Meter Bridge 375 DM1000 Version 2—Owner’s Manual Appendix Meter Bridge Controls A Channel indicators These indicators displa y the channels for which the lev- els are currently displa yed (Input Channels 1-16, 17-32, 33-48, A ux Outs 1-8, B us Outs 1-8).
376 Appendix D: Options DM1000 Version 2—Owner’s Manual Rack Mounting the MB1000 Using Rack Angle Brackets Y ou can rack mount the MB1000 meter bridge using the rack ang le brackets that came with the meter bridge. 1 Detach the MB1000 from the DM1000.
Installing the SP1000 Side Panels 377 DM1000 Version 2—Owner’s Manual Appendix Installing the SP1000 Side Panels The figure belo w illustr ates ho w to attach the left side panel to the DM1000. A ttach the rig ht side panel to the DM1000 in the same wa y .
378 Index DM1000 Version 2—Owner’s Manual Index Symbols ø/INS/DLY | DLY 1-16 page .............. 63 ø/INS/DLY | DLY 17-32 page ............ 63 ø/INS/DLY | DLY 33-48 page ............ 63 ø/INS/DLY | Insert page ................... 116 ø/Ins/Dly | Insert page .
Index 379 DM1000 Version 2—Owner’s Manual Channel Copy Parameter preference ................................................ 269 Channel faders ..................................... 17 Channel ID/Channel preference ...... 268 Channel library .....
380 Index DM1000 Version 2—Owner’s Manual FB.GAIN .............................................. 64 Features ................................................ 13 Automix ........................................ 14 Channel configuration ............
Index 381 DM1000 Version 2—Owner’s Manual SLOT 1 ........................................ 246 System exclusive messages ......... 245 Transmission and Reception ..... 248 USB port ...................................... 246 MIDI | Bulk page .......
382 Index DM1000 Version 2—Owner’s Manual Slot outputs ................................. 114 Using the encoders ..................... 111 PEAK indicators ............................ 16 , 53 Peak level .............................................
Index 383 DM1000 Version 2—Owner’s Manual SLOT 1/2 ..................................26 , 48 , 54 SLOT button ................................ 24 , 137 SLOT section ....................................... 26 SMPTE TIME CODE INPUT connector .......
YAMAHA [Digital Mixing Console-Internal Parameters] Date: 26 Aug. 2002 Model: DM1000 MIDI Implementation Chart Version: 1.0 Function... Transmitted Recognized Remarks Basic Channel Default Changed 1.
DM1000 Block Diagram.
DM1000 Level Diagram DA D SP Noise Floor PH ASE G ATE AD dBu Analog CASCADE I N CASCADE OUT Digital Clipping Level Max. Output Nominal Ou tput [+18dBu ] [–2dBu ] [+24dBu ] [+4dBu ] 0 1 2 3 4 5 6 7 8.
For details of products, please contact your nearest Y amaha representativ e or the authorized distributor listed belo w . Pour plus de détails sur les produits, veuillez-v ous adresser à Y amaha ou au distributeur le plus proche de v ous figurant dans la liste suiv ante.
U.R.G., Pro Audio Division © 2004 Yamaha Corporation 006IPTO-F0 Printed in Japan WD83390 Yamaha Manual Library http://www.yamaha.co.jp/manual/ Owner’ s Manual Keep This Manual For Future Reference.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Yamaha WD83390 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Yamaha WD83390 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Yamaha WD83390 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Yamaha WD83390 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Yamaha WD83390, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Yamaha WD83390.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Yamaha WD83390. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Yamaha WD83390 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
