Manuale d’uso / di manutenzione del prodotto RX-S601BL del fabbricante Yamaha
Vai alla pagina of 131
AV Receiver Owner’s Manual Read the supplied bookle t “ Safety Brochure ” before using the unit. English.
En 2 CO N T E N T S Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 FEATURES 6 What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
En 3 Listening to FM radio (RX-S601D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Selecting a frequency for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
En 4 APPENDIX 107 Frequently asked q uestions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Power, system and remote control .
En 5 Ac cessories Check that the following accessories are supplied with the product. Remote control Batteries (AAA, R03, UM-4) (x2) AM antenna (RX-S601) FM antenna (RX-S601) *One of the above is supplied depen ding on the region of purchase.
En 6 FEA TURES Wha t you can do with the unit A V receiver (the unit) Speakers BD/DVD play er HDMI Control Audio/Video TV remote control Aud io HDMI Control Aud io Audio/Video TV Sequential operation of a TV , A V receiver, and BD/DVD play er (HDMI Control) .
En 7 F ull of useful functions! ❑ Connecting various devices (p.20) A number of HDMI jacks and various input/outpu t jacks on the unit allow you to connect video devices (such as BD/DVD players), audio de vices (such as CD players), game consoles, por table audio player , and other devices.
En 8 Fro nt p an e l 1 ZONE key Enables/disables the audio output to Zone2 (p. 75). 2 INFO (WPS) key Selects the information displayed on the front displ ay (p.79). Enters the wireless net work connection setup (WPS push button configuration) by holding down for 3 seconds (p.
En 9 Fr ont displa y (indicators) 1 HDMI Lights up w hen HDM I signals are being inp ut or outp ut. OUT Lights up when HDMI signals are being out put. 2 ENHANCER Lights up when Compr essed Music Enhancer ( p.47) is working. 3 CINEMA DSP Lights up when CINEMA DSP (p.
En 10 Rear panel 1 HDMI OUT jack For connecting to an HDMI-compatible TV and output ting video/audio signals (p.19). When using ARC, TV audio signal can also be input throu gh the HDMI OUT jack. 2 HDMI 1–6 jacks For connecting to HDMI-compatible playba ck devices and inputting video/audio signals (p.
En 11 Remote control 1 Remote control signal transmitt er T ransmits infrar ed signals. 2 SLEEP key Switches the unit to standby mode automatical ly after a specified period of time has elapsed (sleep ti mer). Press repeatedly to set t he time (120 min, 90 min, 60 min, 30 min, off).
En 12 PREP ARA TIONS This completes all the preparations. Enjoy playing movies, music, ra dio and other content with the unit! General se tup proc edure 1 Placing speakers (p .13) Select the speaker layout for the n umber of speaker s that you are using and place them in your room.
En 13 Select the speaker layout for the num ber of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker layout examples. * Place the surround speakers in front and set “Vir tual CINEMA FRONT” (p .
En 14 5.1-channel system • Y ou can enjoy surround sound ev en without the center speaker (front 4.1-channel system). • Y ou can place the subwoofer either in the left or right side. 5.1-channel system (V irtual CINEMA FRONT) • T o utilize this configuration, set “Virtual CINEMA FRONT” (p.
En 15 ■ Setting the speaker im pedance Under its default settings, the unit is config ured for 6-ohm speakers. When connecting 8-ohm speakers, set the speaker impedance to “8 Ω MIN”. 1 Before connecting speakers, connect the power cable to an A C wall outlet.
En 16 Connect the speakers placed in your room to the unit. The following diagram provides connections for 5.1-channel system as an example. For other systems, connect speakers while referring to the connection diagram for the 5.
En 17 Co nnecting front speakers tha t support bi-amp connections When using front speakers that support b i-amp connections, connect them to the FRONT jacks and SURROUND/ZONE 2/BI-AMP jacks. T o enable the b i-amp function, set “Power Amp Assign” (p.
En 18 ■ V ideo/audio jacks ❑ HDMI jacks T ransmit digital video and digi tal sound through a single jack. Use an HDMI cable. • Use a 19-pin HDMI cable with the H DMI logo . We recommend using a cable less than 5.0 m (16.4 ft) long to prev ent signal quality degradation.
En 19 Connect a TV to the unit so that video input to the unit can be output to the TV . Y ou can also enjoy playback of TV audio on the unit. T o maximize the per for mance of the unit, we recommend connecting a TV with an HDMI cable. ■ HDMI connection Connect the TV to the unit with a n HDMI cable and a digital optica l cable.
En 20 The unit is equipped with a variet y of inpu t jacks including HDMI input jacks to allow you to connect different types of playback devices. For infor mation on how to connect a BLUETOOTH device, an iPod, or a USB storage device, see the following pages.
En 21 ■ Changing the combination of video/audio input jacks If the combination of video/audio input ja ck s available on the unit does not match your video device, change its combination according to the output jacks of your device. Y ou can connect a video device that has the follow ing video/audio output jacks.
En 22 Co nnecting audio devices (such as CD pla yers) Connect audio devices such as CD p layers and MD players to the unit. Depend ing on the audio output jacks available on your aud io device, choose one of the follow ing connections.
En 23 ■ FM/AM ant ennas (RX-S601) Connect the supplied FM/AM antennas to th e unit. Fix the end of the FM antenna to a wall, and place the AM ante nna on a flat surface. Assembling and connectin g the AM antenna • Unwind only the length of cable needed from the AM antenna unit.
En 24 Connect the unit to a router (access point) with a network cable, or prepar e the wireless antenna for establishing a wireless network connection. Y ou can enjoy Internet radio or music files stored on media servers, such as P Cs and Network Attached Storage (NAS), on the unit.
En 25 After all the connections are complete, plug in the power cable. 7 C onnec ting the power cable Before connecting the power cable (General model only) Set the switch position of VOL T AGE SELE CTOR according to your local voltage. V oltages are AC 110–120/220–240 V , 50/60 Hz.
En 26 Select the desired on-screen menu language. 1 Press z (receiver power) to turn on the unit. 2 T urn on the TV and switch the TV inpu t to display video fr om the unit (HDMI OUT jack). • Operations with TV screen are av ailable only when your TV is connected to the unit via HDMI.
En 27 The Y amaha Parametric room Acoustic Optimizer (YP AO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balanc e and acoustic parameters, to suit your room.
En 28 5 T o start the measurement, use the cursor keys to select “Star t” and press SETUP. The measurement will star t in 10 seconds . Press ENTER to star t the measurement immediatel y . • T o stop the measurement temporarily , press RETURN and follow the procedure in “Error messages” (p.
En 29 Error messages If any error message is displayed during the measurement, resolve the problem and perfor m YP AO again. TV screen Front display ■ Proc edure to handle err ors 1 Check the content of error message and press ENTER. 2 Use the cursor keys ( e / r ) to se lect the desired operation.
En 30 W arning messages If a warnin g message is displayed after the measurement, you can still save the measurement results by following on-screen inst ructions. However , we recommend you perform YP AO again in or der to use the unit with the optimal speaker settings.
En 31 Connect the unit to a wireless router (access po int) or a mobile d evice by establishing a wireless connection. • When you connect the unit to a router with a network cable, you need not do this procedure. Selecting the connection method Select a connection method according to your network environment.
En 32 C onnec ting the unit to a wireless network There ar e several methods to connect the unit to a wireless network. Select a connection method according to your environment. ■ A: Sharing the iOS devic e setting Y ou can easily setup a wirele ss connection by applying the connection settings on iOS devi ces (iPhone/iPod touch).
En 33 STRAIGHT DIRECT ENHANCER BASS ENTER N O I T P O P U T E S TOP MENU MUTE PROGRAM VOLUME POP-UP/MENU NET AUX USB BLUETOOTH SCEN E BD DVD TV NET RADIO HDMI AV AUDIO 5 6 12 3 4 12 12 3 FM 3 AM TUNIN.
En 34 ❑ Sharing the iOS device setting using a USB cable If you select “USB Cable” as the connection method, follow the procedure below to share the iOS device setting with the unit. 1 Connect the iOS device to the USB jack, and disable the screen lock on the iOS device.
En 35 ■ C: Using other c onnec tion methods If your wireless r outer (access po int) does not suppor t WPS button configuration method, follow the procedure below to configure the wireless network settings. 1 Press z (receiver power) to turn on the unit.
En 36 STRAIGHT DIRECT ENHANCER BASS ENTER N O I T P O P U T E S TOP MENU MUTE PROGRAM VOLUME POP-UP/MENU NET AUX USB BLUETOOTH SCEN E BD DVD TV NET RADIO HDMI AV AUDIO 5 6 12 3 4 12 12 3 FM 3 AM TUNIN.
En 37 STRAIGHT DIRECT ENHANCER BASS ENTER N O I T P O P U T E S TOP MENU MUTE PROGRAM VOLUME POP-UP/MENU NET AUX USB BLUETOOTH SCEN E BD DVD TV NET RADIO HDMI AV AUDIO 5 6 12 3 4 12 12 3 FM 3 AM TUNIN.
En 38 STRAIGHT DIRECT ENHANCER BASS ENTER N O I T P O P U T E S TOP MENU MUTE PROGRAM VOLUME POP-UP/MENU NET AUX USB BLUETOOTH SCEN E BD DVD TV NET RADIO HDMI AV AUDIO 5 6 12 3 4 12 12 3 FM 3 AM TUNIN.
En 39 C onnec ting a mobile device to the unit direct ly (W ireless Direc t) Follow the procedure below to connect a mobile device to the unit directly . • Wireless Direct connection may be insecure since the communication is not strongly encrypted .
En 40 STRAIGHT DIRECT ENHANCER BASS ENTER N O I T P O P U T E S TOP MENU MUTE PROGRAM VOLUME POP-UP/MENU NET AUX USB BLUETOOTH SCEN E BD DVD TV NET RADIO HDMI AV AUDIO 5 6 12 3 4 12 12 3 FM 3 AM TUNIN.
En 41 STRAIGHT DIRECT ENHANCER BASS ENTER N O I T P O P U T E S TOP MENU MUTE PROGRAM VOLUME POP-UP/MENU NET AUX USB BLUETOOTH SCEN E BD DVD TV NET RADIO HDMI AV AUDIO 5 6 12 3 4 12 12 3 FM 3 AM TUNIN.
En 42 STRAIGHT DIRECT ENHANCER BASS ENTER N O I T P O P U T E S TOP MENU MUTE PROGRAM VOLUME POP-UP/MENU NET AUX USB BLUETOOTH SCEN E BD DVD TV NET RADIO HDMI AV AUDIO 5 6 12 3 4 12 12 3 FM 3 AM TUNIN.
En 43 STRAIGHT DIRECT ENHANCER BASS ENTER N O I T P O P U T E S TOP MENU MUTE PROGRAM VOLUME POP-UP/MENU NET AUX USB BLUETOOTH SCEN E BD DVD TV NET RADIO HDMI AV AUDIO 5 6 12 3 4 12 12 3 FM 3 AM TUNIN.
En 44 Enjoying stereosc opic soun d fields (CINEMA DSP 3D) The unit is equipped with a varie ty of sound programs that utilize Y amaha's original DSP technology (CINEMA DSP 3D). It allows you to easily create sound fields like actual movie theaters or concer t halls in your ro om and enjoy natural stereoscopic sound fields.
En 45 ■ Sound programs suitab le for music (MUSIC) The following sound programs are opti mized for listening to music sources. ■ Sound pro grams suitable fo r stereo pla yback (STEREO) Y ou can select stereo playback. • CINEMA DSP 3D (p.44) and Virtual CINEMA DSP (p.
En 46 STRAIGHT DIRECT ENHANCER BASS ENTER N O I T P O P U T E S TOP MENU MUTE PROGRAM VOLUME POP-UP/MENU NET AUX USB BLUETOOTH SCEN E BD DVD TV NET RADIO HDMI AV AUDIO 5 6 12 3 4 12 12 3 FM 3 AM TUNIN.
En 47 STRAIGHT DIRECT ENHANCER BASS ENTER N O I T P O P U T E S TOP MENU MUTE PROGRAM VOLUME POP-UP/MENU NET AUX USB BLUETOOTH SCEN E BD DVD TV NET RADIO HDMI AV AUDIO 5 6 12 3 4 12 12 3 FM 3 AM TUNIN.
En 48 Y ou can tune into a radio station by specifying its frequency or selecting from register ed radio stations. • The radio frequencies differ depending on the country or region where the unit is being used. The explanation of this section uses a display with frequencies used in U.
En 49 Registering fav orite r adio stations (presets) Y ou can register up to 40 radio st ations as pr esets. Once you have registered stations, you can easily tune into them by selecting their preset numbers.
En 50 ■ Selec ting a preset statio n T une into a register ed radio station by selecting its preset number . 1 Press FM or AM to select “TUNER” as the input sour ce. 2 Press PRESET repeatedl y to select the desired radio station. • “No Presets” appears when no radio stations are registered.
En 51 Radio Da ta S ys tem tuni ng (U.K. and Europe models only) Radio Data System is a data transmission system used by FM stations in many countries.
En 52 DAB (Digital Audio Broadcasting) uses digital signals for clearer sound and more stable reception compared to analog signals. The unit can also receive DAB+ (an upgraded version of DAB) that allows for more stations using MPEG-4 audio codec (AAC+), which has a more ef ficient transmission method.
En 53 Registering fav orite DAB r adio stations (presets) Y ou can register up to 40 DAB radi o stations as presets. Once you have register ed stations, you can eas ily tune into them by selecting their preset numbers. • Y ou can register up to 40 fa vorite radio stations each for D AB and FM bands.
En 54 ■ Clearing preset DAB radio stations Clear DAB radio stations registered to the pr eset numbers. 1 Press D AB to select the D AB band. 2 Press OPTION. 3 Use the cursor keys to select “Clear Preset” and press ENTER. 4 Use the cursor keys ( q / w ) to select a preset station to be c leared and press ENTER.
En 55 Checking reception st rength of ea ch DAB channel label Y ou can check reception strength of each DAB channel label (0 [none] to 100 [best]). 1 Press D AB to select the D AB band. 2 Press OPTION. 3 Use the cursor keys to sele ct “T une Aid” and press ENTER.
En 56 Y ou can tune into an FM radio station by specifying its frequency or selecting from register ed radio stations. Selecting a frequency for rece ption 1 Press FM to select the FM band. 2 Press TUNING repeatedly to set a frequency . TUNING: Increase/decrease the freque ncy .
En 57 Registering fav orite FM r adio stations (presets) Y ou can register up to 40 FM radio stations as presets. Once you have register ed stations, you can eas ily tune into them by selecting their preset numbers. • Y ou can register up to 40 fa vorite radio stations each for D AB and FM bands.
En 58 ■ Selec ting a preset FM radio station T une into a register ed FM radio station by selecting its preset number . 1 Press FM to select the FM band. 2 Press PRESET repeatedly to select the desired FM radio station. • “No Presets” appears when no FM radio stations are registered.
En 59 Radio Data S y stem tuning (U.K. and Europe models only) Radio Data System is a data transmission system used by FM stat ions in many countries. The unit can receive va rious types of Radio Data.
En 60 Y ou can play back music files stored on a BLUETOOTH device (such as smartphones) on the unit. • T o use the BLUET OOTH function, set “Bluetooth” (p .101) in the “Setup” menu to “On”. • For details on supported BLUETOO TH devices , see “Suppor ted devices and file formats” (p.
En 61 Y ou can play back iPod music on the unit using a USB cable supplied with the iPod. Y ou can also play back iPod musi c in other methods. For details, see the following pages. • Playing back music with AirPlay (P .64) • Playing back music stored on a BLUETOOTH device (P .
En 62 ■ Brow se screen 1 List name 2 Contents list Displays the list of iPod content. Use the cursor keys to select an item and press ENTER to confirm the selection. 3 Item number/total 4 Status indicators Display the current r epeat/shuf fle se ttings (p.
En 63 ■ Operating the iP od itself (simple play) 1 Press OPTION. 2 Use the cursor keys to select “iP od Mode” and press ENTER. The TV menu screen turns off and iP od operations are enabled . T o disp lay the TV menu s creen, s elect “iPod Mode” and press ENTER again.
En 64 The AirPlay function allows you to play b ack iT unes or iPhone/iPad/iPod touch music on the unit via network. • T o use this function, the unit and your PC or iP od must be connected to the same router (p.24). Y ou can check whether the network parameters (such as the IP address) are properly assigned to the u nit in “Information” (p.
En 65 • Y ou can tur n on the unit automatically when star ting playback on iT unes or iPod b y setting “Network Standby” (p.100) in the “Setup” menu to “On”. • Y ou can edit the net work name (the unit’s name on the network) displa yed on iT unes/iP od in “Network Name” (p.
En 66 Y ou can play back music files stored on a USB storage device on the unit. • For details on pla yable USB de vices, see “Suppor ted devices and file formats” (p.120). C onnec ting a USB storage device 1 Connect the USB storage device to the USB jack.
En 67 ■ Brow se screen 1 List name 2 Contents list Displays the list of USB storage device contents. Use the cursor keys to select an item and press ENTER to confi rm the selection. 3 Item number/total 4 Status indicators Display the current r epeat/shuf fle se ttings (p.
En 68 ■ Repeat/shuffle settings Y ou can configure the r epeat/shuffle settings for playback of USB storage device contents. 1 When “USB” is selected as the input sour ce, press OPTION. 2 Use the cursor keys to select “Repeat” (Repeat) or “Shuffle” (Shuffle) and press ENTER.
En 69 Y ou can play back music files stored on y our PC or DLNA-compa tible NAS on the unit. • T o use this function, the unit and your PC must be connected to the same router (p.24). Y ou can check whether the network parameters (such as the IP address) are proper ly assigned to the unit in “Information” (p.
En 70 Playback of PC music c onten ts Follow the procedure below to operate the PC music contents and start playback. Y ou can control the PC/NAS with the menu displayed on the TV screen. • Operations with TV screen are availab le only when your TV is connected to the unit via HDMI.
En 71 ■ Playback screen 1 Status indicators Display the current r epeat/shuf fle se ttings (p.71) an d playback status (such as play/pause). 2 Playback inf ormation Displays the artist name, album name, song title, and elapsed time. Use the following remote control keys to control playback.
En 72 Y ou can listen to Internet radio sta tions from all over the world. • Operations with TV screen are availab le only when your TV is connected to the unit via HDMI. If not, carr y out operations while viewing the front display . • T o use this function, the unit must be connected to the Internet (p.
En 73 ■ Playback screen 1 Playb ack in dicator 2 Playback inf ormation Displays the station name, album name , song ti tle, and elapsed time. • Use the external device operation k ey ( s ) to stop playbac k. • Some information may not be av ailable depending on the station.
En 74 Registering fav o rite Internet r adio stations (bookmarks) Y ou can register your favorite Internet radio stations to the “Bookmarks” fol der . ■ Registering the station with the Option menu Follow the procedure below to register your favorite station to the “Bookmarks” fol der .
En 75 The multi-zone functio n allows you to play back different input sour ces in the room where the unit is installed (main zone) and in another room (Zone2). For example, while you are watching TV in the living room (main zone), another person can listen to radio in the study room (Zone2).
En 76 STRAIGHT DIRECT ENHANCER BASS ENTER N O I T P O P U T E S TOP MENU MUTE PROGRAM VOLUME POP-UP/MENU NET AUX USB BLUETOOTH SCEN E BD DVD TV NET RADIO HDMI AV AUDIO 5 6 12 3 4 12 12 3 FM 3 AM TUNIN.
En 77 ■ Selec ting the input sourc e with the SCENE func tion Y ou can use the SCENE function to se lect the input source for Zone2 playback. • T o use the SCENE function in Zone2, you must configure scene assignments separately from the main zone settings.
En 78 STRAIGHT DIRECT ENHANCER BASS ENTER N O I T P O P U T E S TOP MENU MUTE PROGRAM VOLUME POP-UP/MENU NET AUX USB BLUETOOTH SCEN E BD DVD TV NET RADIO HDMI AV AUDIO 5 6 12 3 4 12 12 3 FM 3 AM TUNIN.
En 79 Swit ching information on the fron t display 1 Press INFO (WPS) on the fr ont panel. Each time you press the ke y , the displa yed it em changes. About 3 seconds later , the corresponding inf ormation f or the displa yed it em appears. • Av ailable items v ary depending on the selected input source.
En 80 Y ou can configure separate playback settin g s for differ ent playback sources. This menu is available on the front panel (or on the TV screen), allowing you to easily configure settings during playback. 1 Press OPTION. Front display TV screen 2 Use the cursor keys to select an item and press ENTER.
En 81 ■ Input Se lect (Input) Switches the input source. Press ENTER to switch to the selected input source. Choices HDMI 1–6, AUDIO 1–3, A V 1–3, TUNER, US B, SER VER, NET RADIO, Airplay, (ne.
En 82 ■ V olume T rim (V olume T rim) Fine-adjusts volume differ ence between input sources or subwoofer volume. ❑ Input T rim (In.T rim) Corrects volume differ ences between input sources. If you are bothered by volume differences when switching between input s ources, use this function to correct it.
En 83 ■ V ideo Out (V ideo) Selects a video to be output with the sel ected audio source. For example, you can watching the video while listening to the radio. Input sources TUNER, USB, Blue tooth, AUX Settings ■ Volume Interlock (Interlock) Enables/disables volume controls from iT unes/iPod via AirPlay.
En 84 C ONFIGURA TIONS Y ou can configure the unit’ s various function with the menu displayed on the TV screen. • Operations with TV screen are av ailable only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display .
En 85 Setu p m en u i te ms Menu Item Function Pag e Speaker Configuration Power Amp Assign Selects a speaker syst em. 88 Subwoofer Selects whether or not a subwoofer is connected. 88 Front Selects the size of the front speakers. 88 Center Selects whether or not a cent er speaker is connected a nd its size.
En 86 Sound DSP Par ameter CINEMA DSP 3 D Mode Enables/disables CINEMA DSP 3D. 93 Panorama Enables/disables the broadening ef fect of the fro nt sound field. 93 Center Width Adjusts the br oadening ef fect of the c enter sound field. 93 Dimension Adjusts the differ ence in level between the fr ont and surro und sound fields.
En 87 Bluetooth Bluetooth Enables/disables the BLUETOOTH functions. 101 Audio Receiv e Disconnect T erminates the B LUETOOTH connection between the BL UE TOOTH device (such as smartphones) an d the unit. 60 Blueto oth Stan dby Selects whet her to enabl e/disable the function that tur ns on the u nit from BLUETOOT H devices (BL UETOOTH stand by).
En 88 Speaker Configures the speaker settings manually . • Default settings are underlined. ■ Configur ation Configures the output characteristics of the speakers.
En 89 Selects whether or not surround speakers are connected and their sizes. Settings Sets the lower limit of the low-frequency components that can be output from a speaker whose size is set to “Small”. A frequency sound lower than the specified value will be produced from the subwoofer or front speakers.
En 90 ■ Level Adjusts the volume of each speaker . Choices Front L, Front R, Center, Sur round L, Surr ound R, Subwoofer Setting range -10.0 dB to + 10.0 dB (0.5 dB incremen ts) Default Front L, Front R, Subwoofer: 0.0 dB Others: -1.0 dB ■ Equalizer Adjusts the tone with an equalizer .
En 91 HDMI Configures the HDMI settings. • Default settings are underlined. ■ Configur ation Enables/disables HDMI Control (p.122). Settings • T o use HDMI control, you need to perform the HDMI Control link setup (p.122) after connecting HDMI Control-compatible devices .
En 92 Select whether to use HDMI control to link the standby behavior of the TV and the unit when “HDMI Control” is set to “On”. Settings Enables/disables ARC (p.19) when “HDMI Control” is set to “On”. Settings • Y ou do not need to change this setting nor mally .
En 93 Sou nd Configures the audio output settings. • Default settings are underlined. ■ DSP Par ameter Configures the surround decoder settings. Enables/disables CINEMA DSP 3D (p.44). If this func tion is set to “On”, CINEMA DSP 3D functions with the selected soun d programs (except 2ch Stereo and 5ch Stereo).
En 94 ■ Lipsync Adjusts the delay between video and audio output. • Y ou can enable/disable the Lipsync function by input sources in “Lipsync” (p.82) in the “Option” menu. Selects the method to adjust the delay between video and aud io output.
En 95 Sets the Zone2 maximum volume to prevent excessive loudness. Setting range -30.0 dB to + 15.0 dB (5.0 dB incremen ts), +16.5 dB • This setting is availab le only when “P ower Amp Assign” (p .88) is set to “Zone2”. Sets the Zone2 initial volume when the Zone2 output is enabled.
En 96 EC O Configures the power supply settings. • Default settings are underlined. ■ Auto P ower Standby Set the amount of time for the auto-standby function.
En 97 Fu n c t i o n Configures the functions that make the unit easier to use. • Default settings are underlined. ■ Input Rename Changes the input source name displayed on the front display . Y ou can also select a name from the presets or a name cr eated by the Auto Rename function.
En 98 ■ Remote Color K ey Set the unit's functions for the RED/GREEN/YELLOW/BLUE key of the remote control. Settings ■ Party Mode S et Enables/disables switching to the par ty mode (p.77). Settings Default Assigns the functions of playback devices connect ed to the unit with an HDMI cable.
En 99 Network Configures the network settings. • Default settings are underlined. ■ Information Displays the network information on the unit. ■ Network Connection Selects the network connection method. Choices ■ IP Address Configures the network parameters (such as IP address).
En 100 ■ MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. • Operation of the AirPlay function (p .
En 101 ■ Network Update Updates the fir mware via the network. Starts the process to update the unit’ s firmware. For details, see “Updating the unit’ s firmware via the network” (p.106). Displays the version of the fir mware installed on the unit.
En 102 Language Select an on-screen menu language. • Default settings are underlined. Settings • Japanese and Chinese characters used in content information (such as song titles) cannot be displayed. • The information on the front display is provided in English only .
En 103 Configure the system settings of the unit while viewing the front display . 1 Set the unit to standby mode. 2 While holding down STRAIGHT on the front panel, press z (power). 3 Press PROGRAM to select an item. 4 Press STRAIGHT to select a setting.
En 104 Selecting the remote c ontro l ID (REMO TE ID) Change the unit’ s remote control ID so that it matches the remote control’ s ID (default: ID1). When using multiple Y amaha A V receivers, you can set each r emote control with a unique remote control ID for its corresponding receiver .
En 105 Updating the firm ware (UP DA TE) New firmware that provides additional f eatures or product improvements will be released as needed. Updates can be downloaded from our website. If the unit is connected to the Inter net, you can download the fir mware via the network.
En 106 New firmware that provides a dditional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the fir mware via the network and update it. • Y ou can also update the firmware using the USB memor y device from the “AD V ANCED SETUP” menu (p.
En 107 APPENDIX If you have changed sp eakers or have a ne w speaker system, use YP AO to optimize the speaker settings again (p.27). If you want to ad just the speake r settings manually , use “Speaker” in the “Setup” menu (p.
En 108 If you have connected a video device to the unit with HDMI, you can outpu t videos/audio played back on the video de vice to the TV even when the unit is in standby mode. T o use this fun ction, set “Standby Through” (p.91) in the “Setup” menu to “On” or “Auto”.
En 109 Refer to the table below when the unit doe s not function properly . If the problem you are experiencing is not listed below or if the instructions below do not help, tur n off the unit, disconnect the power cable, and con tact the nearest authorized Y amaha dealer or service center .
En 110 The unit cannot be controlled using the remote control. The unit is out of the operating range. Use the r emote control with in the operating range (p.5). The batteries are weak. Replace with new batteries. The unit’ s remote contro l sensor is exposed to direct sunlight or strong l ighting.
En 111 Aud i o Proble m Cause Remedy No sound. Another input sour ce is selected. Select an appropriate inpu t source with the input selection keys. Signals that the unit cannot r eproduce ar e being input. Some digital audio formats cannot be played back on the unit.
En 112 No sound from the TV (when HDMI Control is used). The TV is set to output audio from the TV speakers. Change the audio output setting on your TV so that the TV audio is output from the speakers connected to the unit. A TV that does not support ARC is connected to the unit only with an HDMI cable.
En 113 Vi d e o Proble m Cause Remedy No video. Another input sour ce is selected on the unit. Select an appropriate inpu t source with the input selection keys. Another input sour ce is selected o n the TV . Switch the TV input to display the video from the unit.
En 114 FM/AM r adio ( AM radio f eatur e is available only on RX -S601.) DAB r adio (RX-S601D) Proble m Cause Remedy FM radio reception is weak or noisy . There is multi-path int erference. Adjust the FM antenna height or orientation , or place it in a differe nt location.
En 115 USB and netw ork Proble m Cause Remedy The unit does not detect the USB device. The USB device is not connected to the USB jack secur ely . T urn of f the unit, r econnect your USB device, and turn the u nit on aga in. The file system of the USB device is not F A T16 or F A T32.
En 116 Bluetooth Wireless network is not f ound. Microwave ove ns or other wir eless devices i n your neighborhood might disturb the wir eless communication. T urn off these devices. Access to t he network is restr icted by the firewa ll settings of the wireless r outer (access point).
En 117 Error indications on the front displa y Message Cause Remedy Access denied Access to th e PC is denied . Co nfigure the sharing settings and selec t the unit as a devic e to which music conten ts are shar ed (p .69). Access err or The unit cannot access the USB device.
En 118 Aud io in fo rm at io n ■ Audio dec oding format Dolby Digit al Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc.
En 119 Sampling frequency/Quantization bit Sampling frequency and quantization bits indicate the quantity of inform ation when an analog audio signal is digitized.
En 120 Ya m a h a t e c h n o l o g i e s CINEMA DSP (Digital Sound Field Processor) Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best experienced in a theater that has many speakers designed for acoustic effects.
En 121 ■ F ile formats ❑ USB, PC/NAS * Linear PCM format only • T o play back FLAC files stored on your PC /NAS, you need to install server software that supports sharing of FLAC files via DL NA on your PC or use a NAS that suppor ts FLAC files.
En 122 HDMI C ontrol HDMI Control allows you to operate external devices via HDMI. If you conne ct a TV that supports HDMI Control to the unit with an HDMI cable, you can contr ol the unit (such as power and volume) with TV remote control operations.
En 123 e Use the curs or ke ys ( q / w ) to select “HDMI Contro l” and the cur sor keys ( e / r ) to select “On” as shown below . f If you made a digital op tical cable connec tion between the TV and the unit , use the cursor ke ys ( q / w ) to select “TV Audio Input” and the cursor k e ys ( e / r ) to select “A V 1”.
En 124 HDMI signal c ompat ibility Au dio signa ls Video signals The unit is compatible with the video signals of the following resolutions: • When CPPM copy-protected D VD-Audio is pla yed bac k, video/audio signals may not be output, depending on the type of the D VD play er .
En 125 Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks of DTS, Inc.
En 126 Input jacks • Analog Audio Audio x 4 • Digital Audio (Suppor ted frequencies: 32 kHz to 96 kHz) Optical x 1 Coaxial x 2 •V i d e o Composite x 3 • HDMI Input HDMI x 6 • Other jacks - USB x 1 (USB2.0) - NETWORK (Wir ed) x 1 (100Base-TX/10Base-T) - NETWORK (Wir eless) x 1 (IEEE802.
En 127 Compatible Decoding Formats • Decoding Format - Dolby TrueHD, Dolby Digital Plus - Dolby Digital - DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS Express - DTS, DTS 96/2 4, DTS-ES Matrix 6.
En 128 Vid e o S e c ti o n • Video Signal T ype [U.S.A., Canada, Korea and G eneral models] ............... NTSC [Other mode ls]...... ............. .......... .............. .......... ............. . PAL • Video Signal Level Composite .........
En 129 Symbols Envelope icon ( p )8 4 Lock icon ( o )9 7 Numerics 2.1-channel system 14 2ch Stereo 45 4K Ultra HD 18 5.1-channel system 14 , 16 A Adaptive DRC 81 ADVANCED SETUP 103 AirPlay 64 AM anten.
En 130 Remote ID 104 Rename 100 Repeat 63 , 68 , 71 S SCENE 42 , 92 Setup menu 84 Shortcut 78 Shuffle 63 , 68 , 71 Signal information 82 Sleep time r 11 Sleep timer (Zone2) 76 Sound program 44 Speaker.
© 2015 Yamaha Corporation YH024B0/EN.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Yamaha RX-S601BL è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Yamaha RX-S601BL - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Yamaha RX-S601BL imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Yamaha RX-S601BL ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Yamaha RX-S601BL, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Yamaha RX-S601BL.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Yamaha RX-S601BL. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Yamaha RX-S601BL insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
