Manuale d’uso / di manutenzione del prodotto HTR-5630RDS del fabbricante Yamaha
Vai alla pagina of 106
Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE., BUENA P ARK, CALIF . 90620, U.S .A. Y AMAHA CANADA MUSIC L TD . 135 MILNER AVE., SCARBOROUGH, ONT ARIO M1S 3R1, CANADA Y AMAHA ELECTRONIK EUROP A G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMB URG, F .
1 T o assure the finest perf ormance , please read this manual carefully . Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry , clean place — awa y from direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
1 English INTRODUCTION PREP ARA TION B ASIC OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION CONTENTS INTRODUCTION CONTENTS ............................................................ 1 FEA TURES ..............................................
2 Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. FEA TURES Multi-mode digital sound field processing ◆ Dolby Pro Logic/Dolby Pro Logic II decoder ◆ Dolby Digital/Dolby Digital + Matrix 6.
3 English INTRODUCTION Installing batteries in the remote control Insert the batteries in the correct direction by aligning the + and – marks on the batteries with the polarity markings (+ and –) inside the battery compartment. 1 Press the tab of the battery compartment cover and pull it in the direction of the arr ow to open the cover .
4 CONTROLS AND FUNCTIONS Front panel 1 ST ANDBY/ON T urns the unit on, or sets it in standby mode. When you turn the unit on, you will hear a click and there will be a 4 to 5-second delay before it can reproduce sound. Standby mode In this mode, the unit uses a small amount of po wer in order to receiv e infrared-signals from the remote control.
5 English INTRODUCTION w STEREO (EFFECT) Switches between normal stereo and DSP effect reproduction. When you select STEREO, the unit mixes down all Dolby Digital and DTS signals (e xcept the LFE channel) as well as those 2-channel signals without effects, to the main left and right speak ers.
6 TEST PROG PROG STEREO LEVEL SET MENU TUNER CD MD/CD-R V-AUX 6CH IN /DTS 6 . 1 /5 . 1 NIGHT SLEEP DV D D-TV/CBL VCR POWER PRESET A/B/C/D/E MUTE VOLUME VOLUME 2 8 1 0 3 5 9 7 4 6 r y e q w t u i Remote control 1 Infrared emitter Outputs infrared control signals.
7 English INTRODUCTION Appro ximately 6 m (20 feet) ■ Using the remote control The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation. ■ Handling the remote control • Do not spill water or other liquids on the remote control.
8 V-AUX VCR D-TV/CBL DVD MD/CD-R TUNER CD MA TRIX DIGIT AL PL PL PCM SILENT DSP HiFi NIGHT VIRTUAL AUTO STEREO SLEEP VOLUME MUTE MEMORY TUNED L C R RL LFE RC RR ~~~~~~~~~~~~~~ dB ft CT RT PTY PS HOLD PTY EON 13 45 8 7 6 2 90 q w y er u i o p a t 1 Processor indicator s The indicators for the various decoder s light up when the decoders are in use.
9 English PREP ARA TION CONNECTIONS Before connecting components CA UTION Do not connect this unit or other components to the mains po wer until all connections between the components hav e been completed. • Be sure all connections are made correctly , that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”.
10 AUDIO L R 2 1 AUDIO VIDEO TUNER L R CD DVD AM ANT GND FM ANT IN (PLAY) MAIN DVD CD DIGITAL INPUT SUB WOOFER CENTER SUB WOOFER MONITOR OUT SURROUND OPTICAL COAXIAL OUT (REC) MD /CD-R D-TV /CBL V-AUX IN VCR OUT 6CH INPUT OUTPUT 75 Ω UNBAL.
11 English PREP ARA TION Connecting audio components ■ Connecting a CD play er Connect the coaxial digital output jack on your CD player to the DIGIT AL INPUT CD jack on this unit. y • Use the A UDIO jacks on this unit to connect to a CD player that does not hav e a CO AXIAL DIGIT AL OUTPUT jack, or to record from CD players.
12 ■ Connecting the AM loop antenna 1 Set up the AM loop antenna, then connect it to the terminals on this unit. 2 Press and hold the tab to insert the AM loop antenna lead wires into the AM ANT and GND terminals. 3 Orient the AM loop antenna for the best reception.
13 English PREP ARA TION Connecting an external decoder This unit is equipped with 6 additional input jacks (MAIN left and right, CENTER, SURR OUND left and right and SUBWOOFER) for discrete multi-channel input from a component equipped with a multi-channel decoder and 6 channel output jacks such as a D VD/SACD player .
14 Connecting the speakers ■ Speakers This unit has been designed to provide the best sound- field quality with a 5-speak er system, using main left and right speakers, rear left and right speakers and a center speaker .
15 English PREP ARA TION 10 mm (3/8 ” ) Red: positive (+) Black: negative ( – ) Banana plug CONNECTIONS 12 ■ Connections Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) in accordance with the markers on this unit, the speakers, and the speaker cables.
16 Subwoofer system Main B speaker Center speaker Right Rear speaker SUBWOOFER jac k When using a subwoofer with b uilt-in amplifier , including the Y AMAHA Active Serv o Processing Subwoofer System, connect the input jack of the subwoofer system to this jack.
17 English PREP ARA TION Connecting the power supply cords ■ Connecting the A C power cord Plug in this unit to a wall outlet. ■ V OL T A GE SELECT OR (General model only) The V OL T A GE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the A C main supply .
18 Using the basic menu Use the remote control to make adjustments. • Press SPEAKERS A/B on the front panel to select the main speakers you want to use, and set SPEAKERS ON/OFF to the ON position. • Mak e sure you disconnect headphones from this unit.
English 19 PREP ARA TION SET MENU B ASIC SOUND INPUT OPTION 1 SETUP Press –/+ to alter the settings for each parameter . Use d to mov e to the next setting. 2 SP LEVEL Press –/+ to adjust the balance between each speaker and the left main speaker .
20 Setting the unit to match your speaker system Follo w the instructions below to set the amplif ier output to match the size of your room and speakers. Press u / d to cycle through parameters 1 through 4, and –/+ to alter the parameter setting. Factory default settings are highlighted.
English 21 B ASIC OPERA TION PLA YBACK 1 Press ST ANDBY/ON (PO WER on the remote control) to turn on the po wer . 2 T urn on the video monitor connected to this unit. 3 Press and set SPEAKERS ON/OFF inward (ON). 4 Press and set SPEAKERS A/B inward (A) or outwar d (B) to select the main speakers y ou want to use .
22 ■ BGV (backgr ound video) function The BGV function allows you to vie w images from a video source together with sounds from an audio source. For example , you can enjoy listening to classical music while watching beautiful scenery from a video source on the video monitor .
English 23 B ASIC OPERA TION Input modes and indications This unit is equipped with 2 types of input jacks for the CD and D VD sources only . Y ou can select the type of input signals you wish to use. Each time you turn on the unit po wer , the input mode is set to the “INPUT 2 INPUT MODE” setting defined in the set menu.
24 Selecting a sound field program Y ou can enhance your listening e xperience by selecting a DSP program. For details about each program, see pages 27 – 30. Press PROGRAM l / h (PR OG – /+ on the remote control) repeatedl y to select the desired program (inc luding sub-programs if av ailable).
English 25 B ASIC OPERA TION ■ Playing Dolb y Digital EX or DTS ES material Press 6.1/5.1 to turn on the Dolby Digital + Matrix 6.1 or DTS + Matrix 6.1 decoder . The display changes A UTO → Matrix6.1 → OFF each time 6.1/5.1 is pressed. A UTO: This mode automatically switches Dolby Digital + Matrix 6.
26 Notes • If you turn off the sound effects, no sound is output from the center speaker or rear speakers. • If you turn off the sound effects while the unit is reproducing sound from a Dolby Digi.
English B ASIC OPERA TION 27 DIGIT AL SOUND FIELD PROCESSING (DSP) Understanding sound fields A sound field is def ined as the “characteristic sound reflections of a particular space. ” In concert halls and other music v enues, we hear early reflections and rev erberations as well as the direct sound produced by the artist(s).
28 CINEMA-DSP Sound design of CINEMA-DSP Filmmakers intend for the dialog to be located right on the screen, the ef fect sound a little farther back, the music spread ev en farther back, and the surround sound around the listener . Of course, all of these sounds must be synchronized with the images on the screen.
English B ASIC OPERA TION 29 ■ For movie pr ograms No. 7 8 9 Features This program creates the extremely wide sound f ield of a 70-mm movie theater . It precisely reproduces the source sound in detail, making both the video and the sound field incredibly real.
30 Sound field effects The 6-channel soundtracks found on 70-mm f ilm produce precise sound field localization and rich, deep sound without using matrix processing. This unit’ s MO VIE THEA TER programs provide the same quality of sound and sound localization that 6-channel soundtracks do.
English B ASIC OPERA TION 31 TUNING 4 Press PRESET/TUNING l / h once to begin automatic tuning. Press h to tune in to a higher frequency , or press l to tune in to a lower frequenc y . When the unit is tuned in to a station, the “TUNED” indicator lights up and the frequency of the station receiv ed is shown on the front panel display .
32 Presetting stations ■ A utomatically presetting stations (for FM stations) Y ou can use the automatic preset tuning feature to store FM stations. This function enables the unit to automatically tune in to FM stations with strong signals, and to store up to 40 (8 stations x 5 groups) of those stations in order .
English B ASIC OPERA TION 33 4 Press PRESET/TUNING l / h to select a preset station number (1 to 8) while the “ MEMOR Y ” indicator is flashing. Press h to select a higher preset station number .
34 ■ Exchanging preset stations Y ou can e xchange the assignment of two preset stations. The example belo w describes the procedure for exchanging preset station “E1” with “ A5”. 1 Select preset station “ E1 ” b y using the A/B/C/D/E and PRESET/TUNING l / h .
English B ASIC OPERA TION 35 Description of RDS data This unit can receiv e, PS, PTY , R T , CT , and EON data when tuned to stations broadcasting RDS. ■ PS (Program Service name) mode: The name of the RDS station being receiv ed is displayed. ■ PTY (Program T ype) mode: There are 15 program types used to classify RDS stations.
36 RECEIVING RDS ST A TIONS PTY SEEK function If you select the desired program type, the unit automatically searches all preset RDS stations that are broadcasting a program of the required type. 1 Press PTY SEEK MODE to set the unit in PTY SEEK mode.
English B ASIC OPERA TION 37 Use this feature to automatically set this unit in standby mode after the amount of time you hav e set. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer can only be set with the remote control.
38 Recording adjustments and other operations are performed on other recording components. Refer to the operation instructions for these components for details on their operation . 1 T urn on the power of this unit and all connected components. 2 Select the source component y ou want to record fr om.
39 English AD V ANCED OPERA TION Adjusting the items on the set menu Use the remote control to make adjustments. y • Y ou can change set menu parameters while the unit is reproducing sound. • Y ou can use NEXT and SET MENU +/– on the front panel to change these settings, if the unit is not set to TUNER mode.
40 5 Press – /+ once to enter the setup mode of the selected item. The last setting you adjusted appears on the front panel display . Depending on the menu item, press u / d to select a sub item. 6 Press – /+ repeatedly to change the menu item setting.
41 English AD V ANCED OPERA TION ■ 1B MAIN (main speaker mode) Choices: LARGE , SMALL LARGE Select this if you hav e large main speakers. The unit directs the entire range of the main left and right channel signals to the main left and right speakers.
42 SOUND 2 SP DIST ANCE (speaker distance) Use this feature to adjust the delay applied to center channel sounds. This feature works when there is sound output from the center speakers with a source such as Dolby Digital or DTS.
43 English AD V ANCED OPERA TION SOUND 5 CENTER GEQ (center graphic equalizer) Use this feature to adjust the built-in 5-band graphic equalizer so that the center speaker tonal quality matches that of the left and right main speakers. Y ou can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.
44 OPTION 1 DISPLA Y SET ■ DIMMER Use this to adjust the brightness of the front panel display . Control range: –4 to 0 OPTION 2 MEM. GUARD (memor y guard) Use this feature to pre vent accidental changes to settings on the unit.
45 English AD V ANCED OPERA TION Using the test tone Use the test tone to set speaker le vels so that the volume from each speaker is identical when heard from your listening position. 1 Press TEST . The unit will output a test tone. 2 Press u / d repeatedly to select a speaker to adjust.
46 SOUND FIELD PROGRAM PARAMETER EDITING Changing parameter settings The initial sound field program settings will pro vide you with an excellent listening e xperience as they are. It is not necessary to alter these settings, but you can create an original listening en vironment by doing so.
47 English ADDITIONAL INFORMA TION Digital sound field parameter descriptions Y ou can adjust the v alues of certain digital sound field parameters so the sound fields are recreated accurately in your listening room. Not all of the follo wing parameters are found in ev ery program.
48 TROUBLESHOOTING Refer to the chart below when this unit does not function pr operly . If the problem you are e xperiencing is not listed belo w or if the instruction below does not help, set this unit to standby mode, disconnect the po wer cord, and contact the nearest authorized Y AMAHA dealer or service center.
49 English ADDITIONAL INFORMA TION Problem No sound / weak sound from particular speakers. No sound from the effect speakers. No sound from the center speaker . No sound from the rear speakers. No sound from the subwoofer . P oor bass reproduction. Cause Incorrect cable connections.
50 Prob lem A “ humming ” sound can be heard. The volume le vel cannot be increased, or the sound is distorted. The sound effect cannot be recorded. The sound field parameters and some other settings on the unit cannot be changed. The unit does not operate properl y .
51 English ADDITIONAL INFORMA TION ■ T uner FM stereo reception is noisy . There is distortion, and clear reception cannot be obtained even with a good FM antenna. The desired station cannot be tuned in with the automatic tuning method. Previously preset stations can no longer be tuned in.
52 GLOSSAR Y ■ Dolby Surr ound Dolby Surround uses a 4 channel analog recording system to reproduce realistic and dynamic sound effects: 2 main left and right channels (stereo), a center channel for dialog (monaural), and a rear channel for special sound effects (monaural).
53 English ADDITIONAL INFORMA TION ■ PCM (Linear PCM) Linear PCM is a signal format under which an analog audio signal is digitized, recorded and transmitted without using any compression.
54 SPECIFICA TIONS FM SECTION • T uning Range [U.S.A. and Canada models] ............................ 87.5 to 107.9 MHz [Other models] .............................................. 87.50 to 108.00 MHz • 50 dB Quieting Sensitivity (IHF , 100% mod.
RX-V340 Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE AVE., BUENA P ARK, CALIF . 90620, U.S .A. Y AMAHA CANADA MUSIC L TD. 135 MILNER A VE., SCARBOROUGH, ONT ARIO M1S 3R1, CANADA Y AMAHA ELECTRONIK EUROP A G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F .
I NS- P 1 00/ NS- P 1 06 (NS-P100/NS-P106: NX-E130 + NX-C130 + SW -P130) HOME CINEMA 5.1CH SPEAKER P ACKAGE/ HOME CINEMA 6.1CH SPEAKER P ACKAGE O WNER’S MANU AL U B NS-P100-106 PRE(UB)a 03.
II • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to aler t you to the presence of uninsulated “dangerous voltage” within the product’ s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
III W e W ant Y ou Listening For A Lifetime Y AMAHA and the Electronic Industries Association ’ s Consumer Electronics Group want y ou to get the most out of your equipment b y playing it at a saf e le vel.
IV ● Speaker cab les ● Subwoof er cable ● F asteners (for NX-C130) ● Nonskid pads (for NX-E130) ● Nonskid pads (for SW -P130) ● Main and rear speakers (and rear center speaker f or NS-P106) ● Center speaker ● Subwoof er UNP A CKING Please check to make sure all listed items are included.
English E- 1 ● T o assure the finest performance, please read this manual carefully . K eep it in a saf e place for future ref erence. ● Install the speakers in a cool, dry , clean place – awa y from windows, heat sources , sources of excessive vibr ation, dust, moisture and cold.
E- 2 CONTENTS IMPORT ANT SAFETY INSTRUCTIONS ........ II UNP A CKING .................................................. IV CA UTION ......................................................... 1 COMPONENTS OF THE P ACKA GE .............. 2 SETTING UP THE SPEAKERS .
English E- 3 Before making connections , place all speakers in their respective positions . The positioning of the speak ers is impor tant because it controls the whole sound quality of this system. Place the speakers depending on y our listening position by follo wing the instr uctions below .
E- 4 䡵 Placing the subw oofer It is recommended to place the subwoof er on the outside of either the right or the left main speaker . (See fig. Å .) The placement shown in fig.
English E- 5 䡵 Mounting the main/rear speaker s (and rear center speaker f or NS-P106) Mount the main/rear speakers (and rear center speak er for NS-P106) on a shelf, r ack or directly on the floor , or hang them on the wall.
E- 6 If y ou want to mount a speaker on a commercially a vailab le speaker stand for the main/rear speaker s (and rear center speaker for NS-P106) Mounting brack et (AAX34790) Screw (AAX12390) 60 mm 1.
English E- 7 B A MAIN CENTER R L SUB WOOFER OUTPUT SPEAKERS REAR (SURROUND) REAR CENTER CENTER R L INPUT2 /MONO AUTO STANDBY OFF LOW HIGH OFF POWER ON VOLUME 01 0 INPUT /MONO FRONT R FRONT R FRONT L F.
E- 8 For connections , keep the speaker cab les as shor t as possible . Do not bundle or roll up the e xcess par t of the cables . If the connections are f aulty , no sound will be heard from the speakers . Before connecting Remov e the insulation coating at the extremity of each speaker cab le by twisting the coating off.
English E- 9 SUBWOOFER SYSTEM YST SW005 INPUT /MONO AUTO STANDBY OFF LOW HIGH OFF POWER ON VOLUME 01 0 220V-240V 110V-120V VOLTAGE SELECTOR 5 4 6 INPUT /MONO AUTO STANDBY OFF LOW HIGH VOLUME 01 0 OFF .
E- 10 䡵 Adjusting the subw oofer before use Bef ore using the subwoofer , adjust the subwoofer to obtain the optim um volume balance between the subwoof er and the main speakers b y following the procedures described below .
English E- 11 1 Set the V OLUME control to minimum (0). 2 T ur n on the power of all the other components. 3 Press the PO WER s witch to the ON position. * The po wer indicator on the front panel lights up in green. 4 Pla y a source containing low-frequency components and adjust the amplifier ’ s v olume control to the desired listening le vel.
E- 12 AD V ANCED Y AMAHA A CTIVE SER V O TECHNOLOGY (f or SW -P130) The theory of Y amaha Activ e Ser vo T echnology has been based upon two major f actors, the Helmholtz resonator and negative-impedance driv e.
English E- 13 TR OUBLESHOO TING Refer to the chart below when this unit does not function properly . If the problem you are e xperiencing is not listed below or if the instructions given below do not help , disconnect the power cord and contact y our author ized Y AMAHA dealer or ser vice center .
E- 14 SPECIFICA TIONS 䡵 NX-E130, NX-C130 T ype ......... Full range acoustic-suspension speaker system Magnetic shielding type Driver ........................ 5 cm (2 ” ) full range cone speaker x 2 Nominal Input P ower ...........................
Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE., BUENA P ARK, CALIF . 90620, U .S.A. Y AMAHA CANADA MUSIC L TD. 135 MILNER AVE., SCARBOR OUGH, ONT ARIO M1S 3R1, CANADA Y AMAHA ELECTRONIK EUROP A G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F .
STANDBY /ON D VD / VIDEO CD / CD PLA YER DV D - S540 OWNER’S MANUAL U.
This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit. This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included.
FCC INFORMA TION (for US customers only) 1. IMPORT ANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Y amaha may void your authority , granted by the FCC, to use the product.
CAUTION: READ THIS BEFORE OPERA TING YOUR UNIT . 1 To assure the finest performance, please read this manual carefully . Keep it in a saf e place for future reference. 2 Install this unit in a well v entilated, cool, dr y , clean place — awa y from direct sunlight, heat sources, vibration, dust, moisture, or cold.
1 Introduction Environmental Information ......................................2 Supplied accessories ..................................................2 Notes about discs ......................................................2 Cleaning discs.........
2 Thank you for purchasing this unit. This Owner’s Manual explains the basic operation of this unit. The region code is 1 for U.S.A and Canada models. Since it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and discs can have an optional region code.
3 Front and Rear Panels * Press button for about two seconds. Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
4 Remote Control * Press and hold button for about two seconds. MENU SETUP ENTER OK STOP ANGLE AB P AUSE PLAY 23 5 46 8 0 79 1 TOP MENU RETUR N ON SCREEN DVD ZOOM AUDIO MUTE SCAN SUBTITLE REPEAT B / |.
5 General Notes on connections Never make or change connections with the power switched on. ● Depending on the equipment you wish to connect, there are various ways you could connect this unit. Possible connections are shown in the following drawings.
6 Video Connections If your AV receiver has video output jacks, connect your receiver (and then to your TV) so that you can use one TV for several different video sources (LD, VCR etc.) by simply switching the input source selector of your receiver. The player has three types of video output jacks.
7 Inserting batteries into the Remote Control 1 Open the battery cover by pressing in the tab, then lift off the cover. 2 Insert batteries with the correct polarity as indicated by the + and - symbols inside the battery compartment. 3 Close the cover.
8 Basic Playback 1 Press STANDBY/ON on the front panel to turn on the DVD player. 2 Press / (OPEN/CLOSE) on the front panel to open disc loading tray. 3 Place the chosen disc in the tray, with the label facing up. 4 Press / (OPEN/CLOSE) again to close the tray.
9 ➜ Mono Right: Output the right audio channels of the disc through the left and right audio jacks. ➜ MIX-Mono: each of the audio jacks can output the same audio effect as stereo. Repeat and Shuffle ● Each time you press REPEAT, the Repeat/Shuffle mode changes as follows; * This feature may not be available with some discs.
10 Zoom The Zoom function allows you to change the image size. 1 Press ZOOM to activate the function. ➜ Use 341 2 to view other parts of the zoomed picture. ➜ Playback will continue. 2 Press ZOOM repeatedly to return to the original size. Special DVD Features Playing a Title A DVD disc may have one or more titles.
11 Preview Function ● Press SCAN to enter previewing menu. ● Press 34 to highlight Track Digest, Disc Interval or Track Interval. ● Press ENTER/OK to open one option. ● After you enter the menu of any digest type, ➜ To quit preview function: Press 341 2 to highlight EXIT and press ENTER/OK.
12 This player can playback JPEG format pictures and MP3 files on a personally recorded CD-R/RW disc or commercial CD, and is compatible with Kodak Picture CD. ● Playback pictures or songs one by one automatically. ● Album and track selection. ● Repeat (disc / album / track / picture).
13 Special JPEG Features Function Introduction Picture CD is a disc with a collection of JPEG format pictures, and all extension filenames should end with ‘JPG’. The CD can be recorded on any computer, and pictures may be from digital camera or scanner.
14 Basic Operation 1 Press SETUP in the STOP mode to enter the Setup Menu. 2 Press ENTER/OK to go to the next level submenu or confirm your selection. 3 Press 1 2 to enter the submenu or return to the previous menu. 4 Press 34 to highlight the desired menu.
15 Repeat the program playback ● During playback of the programmed tracks, press REPEAT. The programed tracks can be played again. Note: If you select Shuffle mode by pressing REPEAT several times, the DVD player cancels program playback. OSD language This option is to select a language for information displayed on TV screen.
16 Digital Audio Setup In this menu, you can set up the digital audio output signal from the digital jacks, such as coaxial etc. Digital Output 1 Press 34 to highlight Digital Output. 2 Enter its submenu by pressing 2 . 3 Press 34 to highlight the selected item.
17 Video Setup menu There are items included in Video Setup menu such as “TV Type”, “TV Display”, “Closed Caption”, “Progressive” and “Picture Setting”. 1 Press SETUP to enter the setup menu. 2 Press 1 2 to choose the VIDEO SETUP icon .
18 Closed Caption Closed captions are data that are hidden in the video signal on specific discs, invisible without a special decoder. The difference between subtitles and captions is that subtitles are intended for hearing persons and captions are for the hearing impaired.
19 Color (saturation) 1 Press 34 to highlight “Color”. 2 Press 2 to open the level bar. 3 Press 1 2 to increase and decrease the color level. 4 Press ENTER/OK to return to the Picture Setting menu. Password Setup This item is used for the parental control and disc lock.
20 Preference Setup menu There are options included in this menu such as “Audio”, “Subtitle”, “Disc Menu”, “Parental”, “Default” and “MP3/JPEG NAV”. 1 Press STOP twice. 2 Press SETUP to enter the setup menu. 3 Press 1 2 to choose the PREFERENCE icon .
21 Parental Control Movies on DVDs may contain scenes which are not suitable for children. Therefore, discs may contain ‘Parental Control’ information which applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternative, more suitable scenes are available on the disc.
22 Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center.
23 PLAYBACK SYSTEM DVD Video Video CD & SVCD CD PICTURE CD CD-R, CD-RW DVD+R, DVD+RW DVD-R, DVD-RW VIDEO PERFORMANCE Video (CVBS) Output 1 Vpp into 75 ohm S-Video output Y: 1 Vpp into 75 ohm C: 0.3 Vpp into 75 ohm Component video output Y: 1 Vpp into 75 ohm Pb/Cb Pr/Cr: 0.
24 These pages can be used to select other languages.This does not affect the options in “Audio”, “Subtitle” or “Disc Menu”. Abkhazian 6566 German 6869 Afar 6565 Gikuyu; Kikuyu 7573 Afrika.
25 These pages can be used to select other languages.This does not affect the options in “Audio”, “Subtitle” or “Disc Menu”. Maori 7773 Sotho, Southem 8384 Marathi 7782 South Ndebele 7882 .
Y AMAHA CORPORATION IP Printed in China YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Yamaha HTR-5630RDS è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Yamaha HTR-5630RDS - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Yamaha HTR-5630RDS imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Yamaha HTR-5630RDS ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Yamaha HTR-5630RDS, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Yamaha HTR-5630RDS.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Yamaha HTR-5630RDS. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Yamaha HTR-5630RDS insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
