Manuale d’uso / di manutenzione del prodotto 809-0910 del fabbricante Xantrex Technology
Vai alla pagina of 70
TM TM System Contr ol Pa n e l Owner’ s Guide scp_manual.book Page i Wed n esday, March 10, 2010 5 :03 PM.
scp_manual.book Page ii Wednesday, March 10, 2010 5:03 PM.
TM TM System Control Panel Owner’s Guide scp_manual.book Page i Wed n esday, March 10, 2010 5 :03 PM.
About Xantrex Xantrex T echnology Inc. (www .xantr ex.com), a subsidiary of Schneider Electric, is a world leader in the development, manufacturing and marketing of ad vanced power electronic products and systems for the renewable and mobile power markets.
iii About This Guide Purpose The purpose of this Owner ’ s Guide is to provide explanations and procedures for installing, operating, maintaining, and troubleshooting the System Control Panel. Scope The Guide provides safety guidelines, setup inform ation, and proc edures for installing and configuring the Syst em Control Panel.
About T his Guide iv 975-0083-01-01 Chapter 2, “Installation”, contains information and procedures for installing the System Control Panel. Chapter 3, “System Con figuration”, contains general in formation for using the System Control Panel to configure another device on the Xanbus system.
v Important Safety Instructions General Pr ecautions 1. Before installing and using this de vice, read all appropriate sections of this guide and any cautionary markings on the System Control Panel and the devices to which it connects. 2. If the System Control Panel has been damaged, see “W arranty and Return Information” on page W A–1.
Safety vi 975-0083-01-01 FCC Information to the User This equipment has been tested and fo und to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is oper ated in a re siden tial environment.
975-0083-01-01 vii Important Safety Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - v 1 Introduction About the System Control Panel - - - - - - - - - - - - - - - - -.
Contents viii 975-0083-01-01 Using the System Settings Menu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4–9 System Settings Menu Configuration Items - - - - - - - - - - -.
Contents 975-0083-01-01 ix A Specifications Electrical Specifications- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A–2 Mechanical Specifications - - - - - - - - -.
x scp_manual.book Page x Wedn esday, March 10, 2010 5:03 PM.
1 Intr oduction Chapter 1 introduces and de scribes features of the Xantrex System Control Panel, including the: • Display screen • Indicator lights • Push Buttons • Connector jacks • T ime-keeping, warning, an d power -saving features scp_manual.
Introduction 1–2 975-0083-01-01 About the System Control P anel Complete system control The Xantrex System Control Pane l provides configuration and monitoring capability for a Xanbus system. The System Control Panel: • Monitors activity througho ut your power system.
Operational F eatures 975-0083-01-01 1–3 Operational F eatur es Other features of the System Control Panel include: • T ime and date—has an internal cl ock that keeps time for the entire system. • Audible alarm—if enabled, alerts you to a low battery condition in the system and notifies you when a fault condition arises.
Introduction 1–4 975-0083-01-01 F eature Description 1 AC In/Charge light (green) indicates qualified AC is pr esent at the input of an invert er/ charger or char ger . 2 Inverter On light (green) indicates an inverter is us ing energy from batteries to provide AC to your appli ances.
Physical Features 975-0083-01-01 1–5 Back panel features Connectors T wo network connector inputs on the back panel let you connect t he System Control Panel to other Xa nbus-enabled de vic es. See Figure 1-2. Figure 1-2 System Control P anel rear panel Network connectors (8-pin RJ45) scp_manual.
Introduction 1–6 975-0083-01-01 System components System description The Xanbus system includes th e System Control Panel an d other Xanbus- enabled devices.
2 Installation Chapter 2 contains inform ation and procedures for planning and performing a System Control Panel installation, including: • Materials and tools required • Choosing a location • Mounting the unit • Connecting the System Control Panel to other devices scp_manual.
Installation 2–2 975-0083-01-01 Installing the System Control P anel The System Contro l Panel is designed to be flu sh mounted through an opening in a wall and secured with four #6 screws. Use the supplied mounting template to precisely ma rk the opening and screw hole locations.
Installing the System Control P anel 975-0083-01-01 2–3 T o mount the System Control Panel: 1. Peel the backing from the supplie d mounting template sticker and place it in your chosen installation location. Use the template to mark locations for the mounting hol es and the area to be cut out.
Installation 2–4 975-0083-01-01 V erifying power is available If network power (from an inverter/char g er or external power supply) is present, the backlight will come on and the System Control Panel will show the startup screen (see page 3–3) for five to ten seconds, the n show the System screen.
3 System Configur ation Chapter 3 contains guidelines for using the System Control Panel to configure another Xanbus-enabled device on the Xanbus system. This chapter does not recomm end specific settings for devices on your system. Refer to the Owner ’ s Guide or Operation Guide for each Xanbus-enabled device for this information.
System Configuration 3–2 975-0083-01-01 Configuring the System System settings are changed from the System Control Panel. Y ou can also use the System Control Panel to view the settings for an y Xanbus-enabl ed device in the Xa nb us system.
Configuring the System 975-0083-01-01 3–3 Menu map Figure 3-2 shows how the System Control Panel screens and menus are organized. The screens and menus are described in T able 3-2.
System Configuration 3–4 975-0083-01-01 Changing settings for a device If you need to change a setting for a device on the system, use the buttons on the System Control Panel to perform these three basic steps: • Starting at the System screen, view the Select Device menu.
Configuring the System 975-0083-01-01 3–5 Selecting the device from the Select Device menu Use this procedure to select a de vice before changing a setting. To s e l e c t a d e v i c e : 1. On the Select Device menu, press the dow n arrow button to highlight the device you want.
System Configuration 3–6 975-0083-01-01 T o select and adjust a setting : 1. On the device menu, press the up arrow or down arrow button to highlight the setting you want to change. 2. Press Enter to highlight the current value of that changeable setting.
4 Configur ation Chapter 4 contains inform ation and procedures for configuring: • the System Control Panel on the System Panel menu. • the time and date on the Clock menu.
Configuration 4–2 975-0083-01-01 Configuring the System Control P anel Y ou can configure the System Control Panel to suit your preferences and the requirements of the Xanbus system. Some of the configurable settings, such as the system time, aff ect the ent ire system.
T he Sy stem P anel Menu 975-0083-01-01 4–3 T o view the System Panel menu: 1. On the Select Device menu , use the down arrow button to hi ghlight System Panel. 2. Press Enter . The System Panel menu appea rs. T o change a setting on the System Panel menu: 1.
Configuration 4–4 975-0083-01-01 3. Use the up and down arrow buttons to change the value. Hold down an arrow button to scroll through a large rang e of values qui ckly . 4. Press Enter to select the value. 5. If you have another setting to change, return to step 1.
Advanced Menu Configuration Items 975-0083-01-01 4–5 Advanced Menu Configuration Items The System Panel advanced menu provides mo re co nfig uratio n optio ns. The advanced menu contains all items from the basic menu, as well as settings for turning the backlight of f and selecting the temperature scale.
Configuration 4–6 975-0083-01-01 Using the Clock Menu Use the Clock menu to set the clock, the date, and the time format you prefer . The clock is listed as a separate device on the Select Device menu. T o view the Clock menu: 1. On the Select Device menu, use the up arrow or down arrow button to highlight Clock.
Clock Menu Configuration Items 975-0083-01-01 4–7 Clock Menu Configuration Items Setting the time Because the System Control Panel keeps time for the power system, setting the clock to the correct local time is essential for the system to operate as expected.
Configuration 4–8 975-0083-01-01 If you make an error, press Exit to m ove back to the value you need to reset. If you decide to abando n resetting the time, press Exit repeatedly until you retu rn to the Clock menu. Setting the date Y ou can set the reference date for the Xanbus system from the Clock menu.
Using the System Settings Menu 975-0083-01-01 4–9 Using the System Settings Menu The System Settings menu displays information related to the operation of the entire Xanbus system. T o view the System menu: 1. On the Select Device menu , use the down arrow button to hi ghlight System.
Configuration 4–10 975-0083-01-01 System Settings Menu Configuration Items Changing the system mode T o change the System mode: 1. On the System Settings menu, with Desired Mode hi ghlighted, press Enter . 2. Use the up arrow or down arrow bu tton to view the available system modes—Operating and Safe.
System Settings Menu Configuration Items 975-0083-01-01 4–11 Safe mode Y ou can also use the red System button to put the System Control Panel and all other Xanbus-ena bled devices into Safe mod e o nly by pressing and holding the Syst em button for five seconds.
4–12 scp_manual.book Page 12 We dnesday, M arch 10, 2010 5:03 PM.
5 Oper ation Chapter 5 contains inform ation and procedures for operating the System Control Panel, including: • Reading screens and menus • Displaying advanced menus • S tartup behavior • System modes • Faults and warnings scp_manual.
Operation 5–2 975-0083-01-01 Reading Screens and Menus The System Control Panel displays s everal different screens and menus. The content of t hese screens and menus will change depending on power system activity or the device you have selected to view information fo r .
Reading Screens and Menus 975-0083-01-01 5–3 Select Device menu Function The Select Device menu is a list of all the Xanb us-enabled devi ces in your power system, including the System Control Panel. Y o u can select a device from this list to view its status and cha nge its settings.
Operation 5–4 975-0083-01-01 Device menu Each Xanbus-enabled device has its own menu sh owing its status and settings. T o view a device menu: 1. On the Select Device menu , use the up arrow or down arrow buttons to highlight the device you want to select.
Viewing Adv anced Menus 975-0083-01-01 5–5 V iewing Advanced Menus The System Control Panel displays device menus in two formats: basic and advanced. The number of items on a device menu will depend on whether you have selecte d to view the basic or advance d menu.
Operation 5–6 975-0083-01-01 2. Press Enter . The System Settings menu appe ars. 3. On the System Settings menu, use the down arrow button to highlight Global Menus. 4. Press Enter . 5. Use the up or down arrow buttons to select Advanced. 6. Press Enter .
Startup Behavior 975-0083-01-01 5–7 Startup Behavior When powering on the Xanbus system for the first time, the System Control Panel displays a fault messag e asking you to set the clock before proceeding. For procedures for setti ng the clock, see “Setting the time” on page 4–7 and “Setting the date” on page 4–8.
Operation 5–8 975-0083-01-01 If the System Control Panel is powered of f while in Safe mode, it wil l be in Safe mode when it is powered up again. T o return to Operating mode: ◆ On the System Settings menu, under Desired Mode, select “Operating”.
W arnings and F aults 975-0083-01-01 5–9 If you see a warning messag e on the System Control Panel, you will have to acknowledge it and (if necessary) clear it. Acknowledging the warning allows you to continue operating th e System Control Panel. Clearing the warning message stops th e warning condition from escalating into a fault.
Operation 5–10 975-0083-01-01 T o view a message from the warning list: 1. On the warning list, use the up arrow or down arrow button to highlight the warning message you want to view .
W arnings and F aults 975-0083-01-01 5–11 Viewing individual warning messages fr om the warning log On the warning log, you can also select an individual warn ing and view its details. T o view details for a warning: 1. Use the up arrow or down arro w button to highlight the warning message you want to view .
Operation 5–12 975-0083-01-01 T ypes of fault messages There are two types of System Control Panel fault messages: automatic and manual. For a list of faults and th eir associated types, refer to Chapter 6, “T roubleshooting”. Automatic faults clear themselves automatically if the fault condition goes away .
W arnings and F aults 975-0083-01-01 5–13 T o return to the System Panel menu: ◆ Press Exit. Viewing individual fault messages fr om the fault log On the fault log, you can also select an individual fault and view its details. T o view details for a fault: 1.
Operation 5–14 975-0083-01-01 Y ou can also view the fault list at any time. T o view the fault list at any time: 1. On the Select Device menu, use the up arrow or down arrow button to highlight System. 2. Press Enter . 3. On the System Settings menu, use the up arrow or down arrow button to highlight V iew Fault List.
6 T r oubleshooting Chapter 6 contains reference tables of warning and fault messages. Use these tables to help you identify the cause of the fault or warning, and determine the best course of action to correct the condition that caused the fault or warning.
T roubleshooting 6–2 975-0083-01-01 T r oubleshooting Reference T ypes of F aults and W arnings The various types of fault and warning messag es behave dif ferently , and give you the option to treat them dif f erently wh en they appear .
T roubleshooting Reference 975-0083-01-01 6–3 W257 New device detected. Check device settings. Manual Y ou have connected a new device to the network or reconnected a disconnected device. Acknowledge the message and check that the device is properly configured.
T roubleshooting 6–4 975-0083-01-01 F ault Reference T able T able 6-2 F ault reference table Fa u l t number Message T ype Cause Action F500 Internal failure. Service required. Manual The silicon serial ID number has failed and the System Control Panel has gone into Safe mode.
A Specifications Appendix A contains the electrical and physical specifications for the System Control Panel. All specifications are subject to change without notice.
Specifications A–2 975-0083-01-01 Electrical Specifications Mechanical Specifications Environmental Specifications Nominal input n etwork voltage 15 VDC Minimum operating network vo ltage 14.
Environmental Specifications 975-0083-01-01 A–3 Figure A-1 System Control P anel dimensions 5 [127] 6 [152] 5.5 [140] 4.03 [102] 3.53 [90] 3.04 [77] 1.18 [30] .40 [10] .96 [24] ALL DIMENSIONS IN INCHES [mm] Enter Exit System Control Panel AC In/Charge Inverter On Low Battery Fault System 0.
A–4 scp_manual.book Page 4 Wedn esday, March 10, 2010 5:03 PM.
975-0083-01-01 WA–1 W arranty and Return Information Wa r r a n t y What does this warranty cover and h ow long does it last? This Limited W arranty is provided by Xantrex T echnology Inc. (“X antrex”) and covers defects in w orkmanship and materials in you r System Control Panel.
W arranty and Return WA–2 975-0083-01-01 Proof of purchase may be in any one of the following form s: • The dated purchase receipt from th e original purchase of the product at point of sale to th.
W arranty and Return 975-0083-01-01 WA–3 LIABILITY ARISING IN TORT , WHETHER OR NOT ARISING OUT OF X ANTREX ' S NEGLIGENCE , AND ALL LOSSES OR DAMAGES TO ANY PROPERTY OR FOR ANY PERSONAL INJURY.
W arranty and Return WA–4 975-0083-01-01 If you are r eturning a product to a Xa ntr ex Authorized Service Center (ASC) A Xantrex return material authorization (RMA) nu mber is not requir ed.
Numerics 12/24 Hour 4–7 A AC In/Charge light 1–4 advanced menu configuration reference 4–5 displaying for all devices 5–6 viewing 4–10 B backlight timer 4–5 basic menu configuration refere.
Index IX–2 975-0083-01-01 N navigation menu map 3–3 using buttons 3–2 network cables 2–4 network connectors 1– 5 network diagram 1–6 network po w e r co nsumption 1–2 O Operating mode 5.
scp_manual.book Page 3 Wedn esday, March 10, 2010 5:03 PM.
Xantrex Technology Inc. 1 800 670 0707 Tel toll free NA 1 360 925 5097 Tel direct 1 800 994 7828 Fax toll free NA 1 360 925 5143 Fax direct customerservice@xantrex.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Xantrex Technology 809-0910 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Xantrex Technology 809-0910 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Xantrex Technology 809-0910 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Xantrex Technology 809-0910 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Xantrex Technology 809-0910, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Xantrex Technology 809-0910.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Xantrex Technology 809-0910. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Xantrex Technology 809-0910 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
