Manuale d’uso / di manutenzione del prodotto WLAN 11b Access Point del fabbricante X-Micro
Vai alla pagina of 32
X-Micr o WLAN 1 1b Access Point User ’ s Manual.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 T erminol ogy ANSI American National S tandards Institute AP Access Point CCK C omplementary C ode K eying CSMA/CA Carrier Sense Multipl.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 T able of Contents TERMINOLOGY ............................................................................................................................. I 1 INTRODUCTION .............
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 4.6 W HA T IS ESSID? .............................................................................................................. 20 4.7 W HA T ARE POTENTIAL F ACTOR S THA T MA Y CAUSES INTERFERENCE ? .
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 1 Introduction X-Micro WLAN 1 1b Access Point is a portal that can act as the connection point between the Ethernet CSMA/CD protocol and the wireless CSMA/CA protocol. The Access Point can be easily integrated into your existing wireless network.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 Dimension 120 * 75 * 34 mm Operating T emperature 0 – 50 o C ambient tem perature Storage T emperature -20 - 70 o C ambient temperatu re Humidity 5 to 90 % maximum (non-condensing) 1.3 Product Features ¾ Complies with IEEE 802.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 1.5 Rear Panel Description Antenna Power Reset LAN Figure 2 – X-Micro WLAN 1 1b Access Point Rear Panel Interfaces Description 1. Reset Push continually the reset button 5 seconds to reset the config uratio n parameters to factory defa ults.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 2 Installation 2.1 Hardware Installation Step One: Place X-Micro WLAN 1 1b Access Po int to the best optimum transmission location.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 3 Software configuration There are web based management and configurat ion functions allowing you to have the jobs done easily . X-Micro W LAN 1 1b Access Point is delivered with the following factory default parameters.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 Connections icon. Move mouse and double-click the Local Area Connection icon. The Local Area Connection window will appear . Click Pro perties button in the Local Area Connection window .
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 3.2 Connect to X-Micro WLAN 1 1b Access Point Open a W EB browser , i.e. Microsoft Internet Explore, then enter 192.168.1.254 on the URL to connect X-Micro WLAN 1 1b Access Point. 3.3 Management and configuration on X-Micro WLAN 1 1b Access Point 3.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 SSID It shows the SSID of X-Micro WL AN 1 1b Access Point. The SSID is the unique name of X-Micro W LAN 1 1b Access Point and shared among its service area, so all devices attempts to join the same wireless network can identify it.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 Screenshot – W ireless Basic Settings Item D escription Alias Name It is the alias name of X-Micro W LAN 1 1b Access Point. The alias name can be 32 characters long. Disable Wi eless LAN Interface r T i ck on to disable the wireless LAN data transm ission.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 knowledge about wireless LAN. These se ttings should not be changed unless you know what effect the changes will h ave on your Access Point.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 4.13 W hat is Preamble T ype? Broadcast SSID Click to enable or disable the SSID broadcast function. Refer to 4.14 W hat is SSID Broadcast? Apply Changes Click the Apply Changes button to complete the new configuration setting.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 bits) and secret key (40-bit or 104-bit). Key Format Select the WEP shared secret key format from pull-down menu. The format can be chose between plant text (ASCII) and hexadecimal (HEX) code.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 Screenshot – W ireless Access Control Item D escription Enable WEP Security Click the check box to enable wireless access control. This is a security control function; only those clients registered in the access c ontrol list can link to X-Micro WLAN 1 1b Access Point.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 previous configuration setting. 3.3.6 LAN Interface Setup This page is used to configure the para meters for local area network that connects to the LAN port of your Access Point. Here you may change the setting for IP address, subnet mask, DHCP , etc.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 cloned. Clone MAC address is de signed for your special application that request the clie nts to register to a server machine with one identified MAC address.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 Wir eless LAN Received Packets It shows the statistic count of received packets on the wireless LAN interface. Ethernet LAN Sent Packets It shows the statistic coun t of sent packets on the Ethernet LAN interface.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 previous configuration setting. 3.3.9 Save /Reload Settings This page allows you save curr ent settings to a file or reload the settings from the file that was saved previously . Besides, you could reset the current configuration to factory default.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 Screenshot – Password Setup Item D escription User Name Fill in the user name for web m anagement login control.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 4 Frequently Asked Questions (F AQ) 4.1 What and how to find my PC’ s IP and MAC address? IP address is the identifier for a computer or device on a TCP/IP network. Networks using the T CP/IP protocol route messages ba sed on the IP address of the destination.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 to the wired LAN for services (file servers, p rinters, Internet links) they will operate in infrastructure mode. Example 1: wireless Infrastructure Mode Ad hoc mode (also called peer -to-peer mode or an Independent Basic Service Set, or IBSS) is simply a set of 802.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 4.7 What are potential factors that may causes interference? Factors of interference: ¾ Obstacles: walls, ceilings, furniture … etc. ¾ Building Materials: metal door , aluminum studs.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 fragments each of size equal to fragment threshold. By tuning the fragment threshold value, we can get varying fragment sizes. Th e determination of an ef ficient fragment threshold is an important issue in this sche m e.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 stations to establish and maintain co mmunications in an orderly fashion. Beacon Interval represents the amount of time between beaco n transmissions.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 5 Configuration Examples 5.1 Example One – DHCP on the LAN Sales division of Company ABC likes to es tablish a W LAN networ k to support mobile communication on sales’ Notebook PCs.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 Configure the LAN interface: Open LAN Interface Setup page and enable the DHCP Client function. Press button to confirm the configuration setting. Configure the WLAN interface: Open WLAN Interface Setup page, enter the SSID “ SDWLAN ”, Channel Number “ 1 ”.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 5.2 Example T wo – Fixed IP on the LAN Company ABC likes to establish a WLAN network to support mobile communication on all employees’ Notebook PCs. MIS engin eer collects information and plans the WLAN Access Point implementation by the following configuration.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 Configure the LAN interface: Open LAN Interface Setup page, enter the IP Address “ 192.168.1.254 ”, Subnet Mask “ 255.255.255.0 ”, Default Gateway “ 192.168.1.10 ”. Press button to confirm the configuration setting.
www .x-micro.com.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il X-Micro WLAN 11b Access Point è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del X-Micro WLAN 11b Access Point - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso X-Micro WLAN 11b Access Point imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul X-Micro WLAN 11b Access Point ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il X-Micro WLAN 11b Access Point, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del X-Micro WLAN 11b Access Point.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il X-Micro WLAN 11b Access Point. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo X-Micro WLAN 11b Access Point insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
