Manuale d’uso / di manutenzione del prodotto RF4400XL del fabbricante Whirlpool
Vai alla pagina of 16
40-INCH FREE-STANDING ELECTRIC RANGE Model RF4400XL -One-Piece Chrome Pdlmrh-- Pa----’ Model and Serial - Number Plate Continuous- - Cleaning Oven Removable - Air-Flow Oven Door Storage- Compartment.
Your responsibilities.. . Proper installation and safe use of your range are your personal responsibilities. Read this “Use and Care Guide” and the “Cooking Guide”carefully for important use and safety information. Installation You must be sure your range Is.
.
Using your range Oven Selector C$2%EEiro, A Surface Unit Controls / I SURFACE UNIT CONTROLS Oven Signal Light Surface UnitVIndicators Surface Unit Signal Light Control knobs must be pushed in before The signal light will glow when a surface turning them to a set- ting.
Automatic MEALTIMER’ Clock Minute Timer Start Time Knob StoD Tlme Knob USING THE MINUTE TIMER 1. Without pushing it in, turn the Minute Bmer 2. Turn the hand back to the setting you want. Knob until the hand passes the setting you 3. When the set time is up, a buzzer will sound.
BAKING OR ROASTING Put the rack(s) where you want them before turning on the oven. Rack(s) should be placed ’ so food can be centered in the oven. Always leave at least I’ 2 to 2 inches (4-5 cm] between the sides of the pan and the oven walls and pans.
BROILING 1. Place the rack where you want it for broiling. 4. Set the Oven Temperature Control on BROIL (or on a lower temperature for slower broiling). 2. Put the broiler pan and food on the rack. 5. During broiling, the oven door must be partly open.
USING THE AUTOMATIC MEALTIMER”: CLOCK The Automatic MEALTIMER Clock is designed to turn the oven on and off at times you setteven when you are not around To start and stop baking automatically: 1. Put the racks where you want them and place the food in the oven.
Hot air and moisture escape from the oven through a vent under the right rear surface unit. You can cook on the unit, or keep food warm on it while the oven is on. Plastic utensils left over the vent can melt. Do not block the vent. Poor baking can result.
Cleaning and caring for your range CONTROL PANEL AND KNOBS 1. Flrst make sure oven and surface unit control knobs are set on OFF. All knobs pull straight off. Surface unit knobs have a collar. 2. Use warm soapy water and a soft cloth to wipe the panel.
REPLACING 1. Be sure surface unit controls are OFF. 2. Line up opening in the reflector bowl with the surface unit receptacle. Terminal 3. Hold the surface unit as level as possible with the terminal just started into the receptacle.
1. Open the door to the broil stop. REPLACING 1. Fit the hinge supports into the openings at the bottom oven corners. 2. Hold the door on both sides and lift slightly to Clear the StoDs in the Lift slightly while sliding the hinge supports into the openings.
TIPS 1. The oven window and racks do not have 3. If you do more broiling than baking, hand the continuous-cleaning surface. Clean cleaning may be needed. them by hand. 4. Use aluminum foil on the oven bot- 2. The oven door does not get as hot as the tom according to instructions.
USING FOIL Foil must be used on the oven bottom to catch spillovers. The foil must be used properly. Cut foil from a roll of heavy-duty 18-inch (45 cm] aluminum foil, or buy a foil kit (Part No. 241430) from your Whirlpool Appliance dealer. Lift the cool bake element slightly to lift the feet off the oven bottom.
CLEANING CHART PART WHAT TO USE HOW TO CLEAN Control knobs Warm, sudsy water and l Wash, rinse and dry well. bristle brush l Do not soak. Control Warm, soapy water l Wash, rinse and dry with soft cloth. panel Commercial glass cleaner l Follow directions with cleaner.
2 l IF YOU NEED SERVICE:‘:: If your WHIRLPOOL” appliance ever needs service anywhere in the United States, help is just a phone call away...to your nearest Whirlpool franchised TECH-CARE R service representative.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Whirlpool RF4400XL è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Whirlpool RF4400XL - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Whirlpool RF4400XL imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Whirlpool RF4400XL ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Whirlpool RF4400XL, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Whirlpool RF4400XL.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Whirlpool RF4400XL. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Whirlpool RF4400XL insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
