Manuale d’uso / di manutenzione del prodotto WPS100 del fabbricante Wasp Bar Code
Vai alla pagina of 466
W asp WPS100 Projection Scanner Product Reference Guide.
.
Wasp WPS100 Projection Scanner Product Refe rence Guide Revision A.
© 2004 W asp T echnologies, Inc. All rights rese rved. W asp T echnologies, Inc. 1400 10th S t reet Plano, TX 75074 http://www .waspbarco de.com.
iii Content s About This Guide Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Chapter Descriptions . . . . . . . . . . . . . . . . . . . . . . . .
iv Wasp WPS100 Product Reference Guide Chapter 3. Maintenance and Technical Specifications Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Maintenance .
v Content s Caps Lock Override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5- 15 Convert Wedge Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
vi Wasp WPS100 Product Reference Guide UPC-E1 Preamble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1- 20 Convert UPC-E to UPC-A . . . . . . . . . . . . . . . . . . . . . . . . . . .
vii Content s Set Lengths for Codabar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 64 CLSI Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
viii Wasp WPS100 Product Reference Guide Special Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-7 Pause Duration . . . . . . . . . . . . . . . . . . . . . . . . . . .
ix Content s Appendix D. Numeric Bar Codes 0, 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1 2, 3, 4 . . . . . . . . . . . . . . . . . . . . . . .
x Wasp WPS100 Product Reference Guide.
xi About This Guide Introduction The Wasp WPS100 Product Reference Guide provides general instructions for setting up, operating, maint aining and troubleshooting the WPS100 scanner . Chapter Descriptions • Chapter 1, Getting Started provides a product overview an d unpacking instructions.
xii Wasp WPS100 Product Reference Guide • Appendix A, St andard Default Paramete rs provides a table of all host de vices and miscellaneous scanner defa ults. • Appendix B, Programming Reference provides a t able of AIM code identifiers, ASCII character conversions, an d keyboard maps.
xiii About This Guide Not ational Conventions The following conventions ar e used in this docu ment: • Bullets (•) indicate: • action items • lists of alternatives • lists of require d steps that are not necessarily sequential • Sequential list s (e.
xiv Wasp WPS100 Product Reference Guide.
1-1 Chapter 1 Getting S t arted Introduction The WPS100 projection scanner provides multiple scan patt ern capabilities that support various applications at the POS (point of sale). For fast, intuitive, han ds-free scanning, use the rastering, 100-line, omni-direction al scan pattern.
1-2 Wasp WPS100 Product Reference Guide The WPS100 scanner support s the following interfaces: • Keyboard W edge connection to a host. Scanned data is interpreted by your host as keystrokes.
1-3 Getting Started Setting Up the Scanner Installing the Interface Cable 1. Connect the interface cable to the ho st computer . 2. Plug the interface cable m odular connector into the in terface cable port on the re ar of the WPS100 (See Figure 1- 2 .
1-4 Wasp WPS100 Product Reference Guide Connecting Powe r (if required) If your host does not provide power to t he scanner , you will need an external power connection to the scanner : 1. Connect the interface cable to the back of th e scanner , as described in Installing the Interface Cable on p age 1-3.
2-1 Chapter 2 Scanning Introduction This chapter covers the techniques involved in scanning bar codes, beeper and LED definitions, and general instructions and tip s about scanning.
2-2 Wasp WPS100 Product Reference Guide Scanning in Single-Line Mode Install and prog ram your scanner . (Refer to each host chapter and Chapter 4, User Preferences , Chapter 7, Symbolog ies , Chapter 8, Miscellaneous Scanne r Options , and Chapter 9, Advanced Data Formatting for instructions on programm ing your sc anner .
2-3 Scanning Scanning in Omni Mode In this mode, an omni scan pattern provides rapid, orien tation-free scanning. This scan pattern is used with e ither hands-free or hand-held scann ing .
2-4 Wasp WPS100 Product Reference Guide Figure 2-3. Scanner in the S tand Figure 2-4. Scanner S tand ing Alone.
2-5 Scanning A rastering, 100-line, om ni-directional scan pattern provides rapid, or ientation-free scanning. This scan p attern can be used in either hands-free or hand-held mod e.
2-6 Wasp WPS100 Product Reference Guide T o scan a bar code, present it to the exit window of the scanner (“present ation” scanning) or move it from side-to-side in a sweepi ng motion (“ swipe” scanning) as show below: Figure 2-7. “Present ation” scanning Figure 2-8.
2-7 Scanning Beeper Definitions The scanner communicates with the user by emitting different beeper seque nces and patterns. T able 2-1 defines beep sequences that occur during both no rmal scanning and while programming the scanner . T able 2-1. Standard Beeper Definition s Beeper Sequence Indication Standa rd Us e 3 short high beeps Power up.
2-8 Wasp WPS100 Product Reference Guide Selecting Beeper V o lume using Trigger The scanner emit s a short beep when it successfully reads a ba r code. The volume of the beep can be changed either by scan ning the appropriate bar code in Beeper V olume on page 4-7, or by utilizing the trigger as follows: 1.
2-9 Scanning LED Definitions In addition to beeper sequence s, the scanner communicates with the user using an LED display . T able 2-2 defines LED flashes that display during scanning. T able 2-2. St andard LED Definitions LED Indication Off No power is applied to the scanner .
2-10 Wasp WPS100 Product Reference Guide Aiming Do not hold the scanner directly o ver the bar code. Laser light reflecting directly back into the scanner from the ba r code is known as spec ular reflection. This specular reflection can make decoding dif ficult.
2-1 1 Scanning Decode Zone Figure 2-10. WPS100 De code Zone LS 9208 5 mil 1.0 2.5 0 5 0 12.7 12.7 5 in. cm W i d t h o f F i e l d Note: T ypical performance at 73.
2-12 Wasp WPS100 Product Reference Guide.
3-1 Chapter 3 Maintenance and T echnical Specifications Introduction This chapter covers suggested scanner maintenance, troub leshooting, technical specifications, and signal descriptions (pinout s). Maintenance Cleaning the exit window is t he only mainte nance required .
3-2 Wasp WPS100 Product Reference Guide T roubleshooting Problem Possible Cau ses Possible Solutions The omni-line scan pattern does not display when yo u follow the directi ons for installing the interface cable on 1-3 No po wer to the scanner . Ensure the host has power , and is on.
3-3 Maintenance and Technical Specifications Note: If after performing these checks the symbol still does not scan, contact W asp T echnical Support at http:// support.
3-4 Wasp WPS100 Product Reference Guide T echnical S pecifications T able 3-1. T echni cal S pecifications Item Desc ription Physical Character istics Dimensions: without stand: Height Width Depth with stand: Height Width Depth 5.51 in. (14 cm) 3.49 in.
3-5 Maintenance and Technical Specifications Scan Patterns Omnidirectional: 20 interlocking lines, 5 scan lines, 4 lines per angle rastering @ 5Hz Single scan line capability Scan Rate Omnidirectional: 1500 scans/second Single scan line: 75 scans/second Depth of Field 0-9 in.
3-6 Wasp WPS100 Product Reference Guide Electrical Safety Certified to UL 1950, CSA C22.2 No. 950 EN60825 Laser Safety CDRH Class IIa Laser Product IEC 60825 Class 1 Laser Product EMC CISPR B, FCC B T able 3-1.
3-7 Maintenance and Technical Specifications Scanner Signal Descriptions Figure 3-1. Scanner Cable Pinout s PIN 10 Back of scanner PIN 1 Interface cable modular connect or Cable interface port.
3-8 Wasp WPS100 Product Reference Guide The signal descriptions in T able 3-2 apply to the conne ctor on the scanner and are for reference on ly . T able 3-2.
4-1 Chapter 4 User Preferences Introduction Y ou have the option to pro gram the WPS100 scanner to perform vari ous functions, or activate dif ferent features. This chapter de scribes each user preference feature and provides th e program ming bar co des necessa ry for selecting these features for your WPS100 scanner .
4-2 Wasp WPS100 Product Reference Guide If you are not using a USB cable , you must sele ct a host type (see each host chapter for specific host infor mation). After you hear the power-up beeps, select a host type. This only needs to be done once, upon the first power-up when connected to a new host.
4-3 User Preferences User Preferences Default Parameters T able 4-1 list s the defaults for user prefer enc es parameters. If you wish to change any option, scan the appropr iate bar code(s) provided in the User Preferences secti on beginning on p age 4-5 .
4-4 Wasp WPS100 Product Reference Guide Linear UPC/EAN Decode Disable 4-18 T able 4-1. User Prefere nces Defau lt T a ble Parameter Default Page Number.
4-5 User Preferences User Preferences Set Default Parameter Scanning this bar code returns all p arameters to the default values listed in T able A-1 on pag e A - 1 .
4-6 Wasp WPS100 Product Reference Guide Beeper T one T o select a decode beep freq uency (tone), scan the Low Frequency , Medium Freque ncy , or High Frequency bar code.
4-7 User Preferences Beeper V olume T o select a beeper volume, scan the Low Vo l u m e , Medium Vo l u m e , or High Vo l u m e bar code. Low V olume Medium V olume * High V olume.
4-8 Wasp WPS100 Product Reference Guide V olume Change Trigger Delay The volume on the WPS100 scanner is adjusted by pressing a nd holding the trigger for a certain a mount of time, after which the sca nner changes the vo lumes, and beeps with the new volume.
4-9 User Preferences Laser On T ime This parameter set s the maximum time that decode processing continues during a scan attempt. It is programmable in 0.1 second increments fro m 0.5 to 10 seconds. The default Laser On T ime is 3.0 seconds. T o set a Laser On T ime, scan the bar code below .
4-10 Wasp WPS100 Product Reference Guide Beep After Good Deco de Scan a bar code below to select whether or n ot the scanner beeps af ter a good decode. If Do Not Beep Af ter Good Decode is selected, the beeper st ill operates during pa rameter menu scanning and indicates error co nditions.
4-1 1 User Preferences Low Power Blink After a period of inactivity , the scanner will go into a reduc ed power mode. This parameter controls how aggressively power is conserve d, and theref ore dete rmines th e method of waking the scanner up .
4-12 Wasp WPS100 Product Reference Guide Scan Pattern Mode The WPS100 has a very aggressive scan p attern th at is not only omnidirectional, but also raster . If a static omnidir ectional pattern is desired, sc an the “Om nidirection al Pattern” parameter below t o change t he scan pattern.
4-13 User Preferences Single-Line Aim Duration The LS 9200 can enter the single-line scan mode by t apping the trigger . Once in this mode, each trigger pull will attempt to decode the bar code in front of the scanner . After a period of inactivity while the trigger is not pressed, the scanner will revert to the omnidirectional pattern.
4-14 Wasp WPS100 Product Reference Guide Single-Line Aim Duration (Con tinued) Aim Duration 4 sec Aim Duration 5 sec.
4-15 User Preferences T imeout Between Decodes Timeout Between Decodes, Same Symbol This parameter set s the minimum time betw e en decodes of differe nt symbols. It is programmab le in 0.1- second incr ements from 0.0 to 9.9 seco nds. Setting this above 0.
4-16 Wasp WPS100 Product Reference Guide T ime Delay to Low Power Mode This parameter set s the time that the sca nne r remains active after any scanning activity . Scan one of the four options. Depending on the selection, the scanner enter s a sleep mode 15, 30, 60 or 90 minutes after the last attemp ted decode.
4-17 User Preferences T ime Delay to Low Power Mode (Continued) 60 Minutes 90 Minutes.
4-18 Wasp WPS100 Product Reference Guide Linear UPC/EAN Decode This option applies to code types cont aining two adjacent blo cks (e.g., UP C-A, EAN-8, EAN-13). When enabled, a bar code is transmitted only when both the left and right blocks are successfully decoded withi n one laser sc an.
5-1 Chapter 5 Keyboard W edge Interface Introduction This chapter covers Keyboard W edge interface information for setting up your scann er . This interface type is used to attach the sc anne r between the keyboard and host computer . The scanner translates the bar code dat a into keystrokes.
5-2 Wasp WPS100 Product Reference Guide Connecting a Keyboard W edge Interface Figure 5-1. Keyboard We dge Connection with Y -cable T o connect the Keyboard Wed ge Y -cable: 1. Switch off the ho st and unplug the keyboard connector . 2. Attach the modular con nector of the Y - cable to the cable interface port on the scanner .
5-3 Keyboard Wedge Interface Keyboard W edge Default Parameters T able 5-1 list s the defaults for Keyboard W edge host parameters. If you wish to change an y option, scan the ap propriate bar code(s) pro vided in the Keyboard Wedge Host Pa rameters section beginning on p age 5-4 .
5-4 Wasp WPS100 Product Reference Guide Keyboard W edge Host T ypes Keyboard Wedge Host T ypes Select your keyboa rd wedge host by scanning one of the bar codes below .
5-5 Keyboard Wedge Interface Keyboard Wedge Host T ypes (Continued) IBM XT NCR 7052 Note: 1 User selection is required to config ure this interface and this is the most common selection.
5-6 Wasp WPS100 Product Reference Guide Keyboard Wedge Country T ypes (Coun try Codes) Scan the bar code correspon ding to your keyboar d type. If your particular keyboard type is not listed, see Alternate Numeric Keypa d Emulation on page 5-13.
5-7 Keyboard Wedge Interface Keyboard Wedge Country T ypes (Continued) French C anadian Wi n 95/98 French Cana dian Windows XP/2000 Sp anish Windows.
5-8 Wasp WPS100 Product Reference Guide Keyboard Wedge Country T ypes (Co ntinued) Italian Windows Swedish W indows UK English Window s.
5-9 Keyboard Wedge Interface Keyboard Wedge Country T ypes (Continued) Japanese Windows Brazilian/ Portuguese Window s.
5-10 Wasp WPS100 Product Reference Guide Ignore Unknow n Characters Unknown characters are characters the host does not recognize. Wh en Send Bar Codes With Unknown Ch aracters is selected, all bar code dat a is sent except for unknown characters, and no error beeps sound on the scanner .
5-1 1 Keyboard Wedge Interface Keystroke Delay This is the delay in millisecon ds between emulated keystrokes. Scan a bar code below to increase the delay when host s require a slower transmission of dat a.
5-12 Wasp WPS100 Product Reference Guide Intra-Keystroke Delay When enabled, an ad ditional delay is insert ed between each emula ted key depression and release.
5-13 Keyboard Wedge Interface Alternate Numeric Keypad Emulation This allows emulation of most other country keyboard ty pes not listed in Keyboard Wedge Country T ypes (Country Codes) on p age 5-6 in a Microsoft operating sys tem environm ent.
5-14 Wasp WPS100 Product Reference Guide Caps Lock On When enabled, the scanner emul ates keystrok es as if the Caps Lock key is always pressed. Enable Cap s Lock On * Disable Caps Lock On.
5-15 Keyboard Wedge Interface Caps Lock Override When enabled , on A T or A T No tebook ho sts, the keyboard ignores th e state of the Ca ps Lock key . Ther efore, an ‘A ’ in the bar code is sent as an ‘A ’ no matter what the state of t he keyboard’s Caps Lock key .
5-16 Wasp WPS100 Product Reference Guide Convert We dge Data When enabled, the scanner will convert all bar code data to the selected case. Convert to Upper Case Convert to Lower Case * No Convert.
5-17 Keyboard Wedge Interface Function Key Mapping ASCII values under 32 are normally sent as a control-key sequences (see T able 6- 2 on page 6-18). When this p arameter is enabled, the keys in bold are sent in place of the standard key map ping.
5-18 Wasp WPS100 Product Reference Guide FN1 Substitution When enabled, this allows repla cement of an y FN1 characte rs in an EAN 128 bar code with a Key Category and Key V alue choos e by the user (s ee FN1 Substitution Values on p age 8-8).
5-19 Keyboard Wedge Interface Send Make Break When enabled, the scan codes for releasing a key are not sent. *Send Make and B reak Scan Code s Send Make Scan Code Only.
5-20 Wasp WPS100 Product Reference Guide Keyboard Maps The following keyboard ma ps are provided for prefix/suf fix keystroke parameters. T o program t he prefix/su ffix values, see the bar code s on page 8-5 . Figure 5-2. IBM PS2 T ype Keyboard . Figure 5- 3.
5-21 Keyboard Wedge Interface Figure 5-4. IBM PC/A T Figure 5-5. NCR 7052 32-KEY 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 7009 7008 7013 7012 7004 7011 7003 7002 7014 5007 5008 5010 5002 5003.
5-22 Wasp WPS100 Product Reference Guide Figure 5-6. NCR 7052 58-KEY 5007 5008 5010 5002 5003 5004 5005 5006 1046 1045 5014 1043 5013 5015 5016 5018 5019 1086 1087 1088 1089 1090 5001 1066 1072 1073 1.
5-23 Keyboard Wedge Interface ASCII Character Set Note: Code 39 Full ASCII interpret s the bar code special character ($ + % /) preceding a Code 39 character and assigns an ASCII character value to the p air . For example, when Code 39 Full ASCII is enabled and a +B is scanned, it is in terpreted as b , %J as ? , and %V as @ .
5-24 Wasp WPS100 Product Reference Guide 1016 $P CTRL P 1017 $Q CTRL Q 1018 $R CTRL R 1019 $S CTRL S 1020 $T CTRL T 1021 $U CTRL U 1022 $V CTRL V 1023 $W CTRL W 1024 $X CTRL X 1025 $Y CTRL Y 1026 $Z C.
5-25 Keyboard Wedge Interface 1043 /K + 1044 /L , 1045 - - 1046 . . 1047 /O / 1048 0 0 1049 1 1 1050 2 2 1051 3 3 1052 4 4 1053 5 5 1054 6 6 1055 7 7 1056 8 8 1057 9 9 1058 /Z : 1059 %F ; 1060 %G < 1061 %H = 1062 %I > 1063 %J ? 1064 %V @ 1065 A A 1066 B B 1067 C C 1068 D D 1069 E E T able 5-2.
5-26 Wasp WPS100 Product Reference Guide 1070 F F 1071 G G 1072 H H 1073 I I 1074 J J 1075 K K 1076 L L 1077 M M 1078 N N 1079 O O 1080 P P 1081 Q Q 1082 R R 1083 S S 1084 T T 1085 U U 1086 V V 1087 W W 1088 X X 1089 Y Y 1090 Z Z 1091 %K [ 1092 %L 1093 %M ] 1094 %N ^ 1095 %O _ 1096 %W ‘ T able 5-2.
5-27 Keyboard Wedge Interface 1097 +A a 1098 +B b 1099 +C c 11 0 0 + D d 11 0 1 + E e 11 0 2 + F f 11 0 3 + G g 11 0 4 + H h 11 0 5 + I i 11 0 6 + J j 11 0 7 + K k 11 0 8 + L l 11 0 9 + M m 111 0 + N .
5-28 Wasp WPS100 Product Reference Guide 11 2 4 % Q | 11 2 5 % R } 11 2 6 % S ~ AL T Keys Keystroke 2065 AL T A 2066 AL T B 2067 AL T C 2068 AL T D 2069 AL T E 2070 AL T F 2071 AL T G 2072 AL T H 2073.
5-29 Keyboard Wedge Interface 2088 AL T X 2089 AL T Y 2090 AL T Z GUI Shift Keys The Apple ™ iMac keyboard has an apple key on either side of the space bar . Window s-based systems have a GUI key to the left of the left AL T key , and to the right of the right AL T key .
5-30 Wasp WPS100 Product Reference Guide 3073 GUI I 3074 GUI J 3075 GUI K 3076 GUI L 3077 GUI M 3078 GUI N 3079 GUI O 3080 GUI P 3081 GUI Q 3082 GUI R 3083 GUI S 3084 GUI T 3085 GUI U 3086 GUI V 3087 GUI W 3088 GUI X 3089 GUI Y 3090 GUI Z F Keys Keystroke 5001 F1 5002 F2 5003 F3 5004 F4 5005 F5 5006 F6 5007 F7 5008 F8 T able 5-2.
5-31 Keyboard Wedge Interface 5009 F9 5010 F10 501 1 F1 1 5012 F12 5013 F13 5014 F14 5015 F15 5016 F16 5017 F17 5018 F18 5019 F19 5020 F20 5021 F21 5022 F22 5023 F23 5024 F24 Numeric Keypad Keystroke 6042 * 6043 + 6044 undefined 6045 - 6046 . 6047 / 6048 0 6049 1 6050 2 6051 3 T able 5-2.
5-32 Wasp WPS100 Product Reference Guide 6052 4 6053 5 6054 6 6055 7 6056 8 6057 9 6058 Enter 6059 Num Lock Extended Keypad Keystroke 7001 Break 7002 Delete 7003 Pg Up 7004 End 7005 Pg Dn 7006 Pause 7.
5-33 Keyboard Wedge Interface a. The Keystroke in bold is sent on ly if the “Func- tion Key Mapping” p arameter is enabled. Other- wise, the unbolded k eystroke is sent.
5-34 Wasp WPS100 Product Reference Guide.
6-1 Chapter 6 USB Interface Introduction This chapter covers the con nection and setup of the scanner to a USB host. The scan ner attach es directly to a USB host, or a powered USB hub, and is powered by it. No add itional power supply is required. Throughout the programming bar code men us, default values are indicated with asterisks ( * ).
6-2 Wasp WPS100 Product Reference Guide Connecting a USB Interface Figure 6-1. USB Connection The scanner connect s with USB capable host s including: • Desktop PCs and Notebooks • Apple™ iMac, G4, iBooks (North America only) • IBM SurePOS terminals • Sun, IBM, and other network computers that support more tha n one keyboard.
6-3 USB Interface 2. Plug the series A conn ector in the USB host or hub, or plug the Plus Power connector in an available port of the IBM SurePOS terminal.
6-4 Wasp WPS100 Product Reference Guide USB Default Parameters T able 6-1 lists the defa ults for USB host p arameters. If you wish to change any option, scan the appro priate bar code(s) pro vided in the Parameter De scriptions section beg inning on pag e 6-5 .
6-5 USB Interface USB Host Parameters USB Device T ype Select the desired USB device typ e. Note: When changing USB Device T y pes, the scanner automatically restart s.
6-6 Wasp WPS100 Product Reference Guide USB Country Keyboard T ypes (Country Codes) Scan the bar code corresponding to your ke yb oard type. This setting applies only to the USB HID Keyboard Emul ation device. Note: When changing Country Selection, the scanner automatically restart s.
6-7 USB Interface USB Country Keyboard T ypes (Continued) Sp anish (T raditional), Windows French Cana dian, Windows French Canadian, Windows 2 000/XP.
6-8 Wasp WPS100 Product Reference Guide USB Country Keyboard T ypes (Continued) Swedish, W indows UK English, W indows It alian, Windows.
6-9 USB Interface USB Country Keyboard T ypes (Continued) Portuguese-Braz ilian, Windows Japanese, Wi ndow s (ASCII).
6-10 Wasp WPS100 Product Reference Guide USB Keystroke Delay This parameter sets the delay , in milliseconds, between emul ated keystrokes. Scan a bar code below to increase the delay when host s require a slower transmission of dat a.
6-1 1 USB Interface USB CAPS Lock Override This option applies o nly to the HID Keyboard Emulation device. When enabled, the case of the data is preser ved regardless of the sta te of the caps lock key . This setting is always enabled for the “Jap anese, Windows (ASCII )” keyboard type and can not be disabled.
6-12 Wasp WPS100 Product Reference Guide USB Ignore Unknown Characters This option applies only to the HID Keyboard Emulation device and IBM device. Unkno wn characters ar e characte rs the host does not recognize.
6-13 USB Interface Emulate Keypad When enabled, all characters ar e sent as ASCII sequences over the numeric keypad. For example ASCII A would be sent as “AL T make” 0 6 5 “AL T Break”.
6-14 Wasp WPS100 Product Reference Guide USB Keyboard FN1 Substitution This option applies only to the USB HID Ke yb oard Emulation device. When ena bled, this allows replacement of any FN1 characters.
6-15 USB Interface Function Key Mapping ASCII values under 32 are normally sent as a control-key sequences (see T able 6- 2 on page 6-18). When this p arameter is enabled, the keys in bold are sent in place of the standard key map ping. T able entries that do not have a bold entry remain the same whether or not this paramete r is enabl ed.
6-16 Wasp WPS100 Product Reference Guide Simulated Caps Lock *Disable Simulated Caps Lock Enable Simulated Cap s Lock.
6-17 USB Interface Convert Case When enabled, the scanner will convert all bar code data to the selected case. *No Case Conversion Convert All to Upper Case Convert All to Lower Case.
6-18 Wasp WPS100 Product Reference Guide ASCII Character Set T able 6-2. USB ASCII Character Set ASCII V alue Full ASCII Code 39 Encode Char. Keystroke 1001 $A CTRL A 1002 $B CTRL B 1003 $C CT RL C 10.
6-19 USB Interface 1022 $V CTRL V 1023 $W CTRL W 1024 $X CTRL X 1025 $Y CTRL Y 1026 $Z CTRL Z 1027 %A NONE/ ESC a 1028 %B NONE 1029 %C NONE 1030 %D NONE 1031 %E NONE 1032 S pace S pace 1033 /A ! 1034 /B “ 1035 /C # 1036 /D $ 1037 /E % 1038 /F & 1039 /G ‘ 1040 /H ( 1041 /I ) 1042 /J * 1043 /K + 1044 /L , 1045 - - 1046 .
6-20 Wasp WPS100 Product Reference Guide 1049 1 1 1050 2 2 1051 3 3 1052 4 4 1053 5 5 1054 6 6 1055 7 7 1056 8 8 1057 9 9 1058 /Z : 1059 %F ; 1060 %G < 1061 %H = 1062 %I > 1063 %J ? 1064 %V @ 1065 A A 1066 B B 1067 C C 1068 D D 1069 E E 1070 F F 1071 G G 1072 H H 1073 I I 1074 J J 1075 K K T a ble 6-2.
6-21 USB Interface 1076 L L 1077 M M 1078 N N 1079 O O 1080 P P 1081 Q Q 1082 R R 1083 S S 1084 T T 1085 U U 1086 V V 1087 W W 1088 X X 1089 Y Y 1090 Z Z 1091 %K [ 1092 %L 1093 %M ] 1094 %N ^ 1095 %O _ 1096 %W ` 1097 +A a 1098 +B b 1099 +C c 1 100 +D d 1 101 +E e 1 102 +F f T a ble 6-2.
6-22 Wasp WPS100 Product Reference Guide 1 103 +G g 1 104 +H h 1 105 +I i 1 106 +J j 1 107 +K k 1 108 +L l 1 109 +M m 111 0 + N n 1111 + O o 111 2 + P p 111 3 + Q q 111 4 + R r 111 5 + S s 111 6 + T t.
6-23 USB Interface 2067 AL T C 2068 AL T D 2069 AL T E 2070 AL T F 2071 AL T G 2072 AL T H 2073 AL T I 2074 AL T J 2075 AL T K 2076 AL T L 2077 AL T M 2078 AL T N 2079 AL T O 2080 AL T P 2081 AL T Q 2082 AL T R 2083 AL T S 2084 AL T T 2085 AL T U 2086 AL T V 2087 AL T W 2088 AL T X 2089 AL T Y 2090 AL T Z T a ble 6-2.
6-24 Wasp WPS100 Product Reference Guide GUI Shift Keys The Apple ™ iMac keyboard has an apple key on either side of the space bar . Windows-based systems have a GU I key to the left of the lef t AL T key , and to the right of the right AL T key .
6-25 USB Interface 3076 GUI L 3077 GUI M 3078 GUI N 3079 GUI O 3080 GUI P 3081 GUI Q 3082 GUI R 3083 GUI S 3084 GUI T 3085 GUI U 3086 GUI V 3087 GUI W 3088 GUI X 3089 GUI Y 3090 GUI Z F Keys Key stroke 5001 F1 5002 F2 5003 F3 5004 F4 5005 F5 5006 F6 5007 F7 5008 F8 5009 F9 5010 F10 501 1 F1 1 T a ble 6-2.
6-26 Wasp WPS100 Product Reference Guide 5012 F12 5013 F13 5014 F14 5015 F15 5016 F16 5017 F17 5018 F18 5019 F19 5020 F20 5021 F21 5022 F22 5023 F23 5024 F24 Numeric Keypad Keystroke 6042 * 6043 + 6045 - 6046 . 6047 / 6048 0 6049 1 6050 2 6051 3 6052 4 6053 5 6054 6 6055 7 T a ble 6-2.
6-27 USB Interface 6056 8 6057 9 6058 Enter 6059 Num Lock Extended Keypad Keystroke 7001 Break 7002 Delete 7003 PgUp 7004 End 7005 Pg Dn 7006 Pause 7007 Scroll Lock 7008 Backspace 7009 T ab 7010 Print Screen 701 1 Insert 7012 Home 7013 Enter 7014 Escape 7015 Up Arrow 7016 Down Arrow 7017 Left Arrow 7018 Right Arrow a.
6-28 Wasp WPS100 Product Reference Guide.
7-1 Chapter 7 Symbologies Introduction This chapter descr ibes all symbology features and prov ides the progra mming bar codes necessary for selecting these featur es for your WPS100 scanner . Before programming, follow the instructions in Chapter 1, Getting St arted .
7-2 Wasp WPS100 Product Reference Guide Scanning Sequence Examples In most cases you need only scan one bar co de to set a specific parameter value. For example, if you want to transmit ba r code data.
7-3 Symbologies Symbology Default Parameters T able 7-1 list s the defaults for all symbologies p arameters. If you wish to change any option, scan the appropr iate bar code(s) provid ed in the Symbologies Pa rameters se ction beginning on 7-8 .
7-4 Wasp WPS100 Product Reference Guide UPC-A Preamble System Character 7-18 UPC-E Preamble System Character 7-19 UPC-E1 Pream ble System Charact er 7-20 Convert UPC-E to A Disable 7-21 Convert UPC-E1.
7-5 Symbologies T ransmit Code 39 Che ck Digit Do not transmit 7-37 Code 39 Full ASCII Conversion Disable 7-38 Buffer Code 39 Disable 7-39 Code 39 Decode Performance Enable 7-43 Code 39 Decode Perform.
7-6 Wasp WPS100 Product Reference Guide Discrete 2 of 5 Disable 7-59 Set Length(s) for D 2 of 5 12 7-60 Chinese 2 of 5 Enable/Disable Chine se 2 of 5 Disab le 7-62 Codabar ( NW - 7) Codabar Disable 7-.
7-7 Symbologies Symbology - Specific Security Levels Redundancy Security Level s 1 7-80 Security Level 0 7-83 Symbology - Inte rcharacter Gap Intercharacter Gaps Normal 7-85 T able 7-1.
7-8 Wasp WPS100 Product Reference Guide UPC/EAN Enable/Disable UPC-A/ UPC-E T o enable or d isable UPC-A or UPC-E, scan the app ropriate bar code below .
7-9 Symbologies Enable/Disable UPC-A/ UPC-E (Continued) Disable UPC-E Enable/Disable UPC-E1 T o enable or disable UPC-E1, scan th e appropriate bar code below .
7-10 Wasp WPS100 Product Reference Guide Enable/Disable EAN-13/JAN-13/EAN-8/JAN-8 T o enable or disable EAN-13/JAN- 13 or EA N-8/JAN-8, scan the appropria te bar code below .
7-1 1 Symbologies Enable/Disable EAN-13 /EAN-8 (Continued) Disable EAN-8/JAN-8 Enable/Disable Bookland EAN T o enable or d isable Bookland EAN, scan the appr opriate bar code below .
7-12 Wasp WPS100 Product Reference Guide Decode UPC/EAN Supplementals Supplement als are bar codes appended according to specific format conventio ns (e.g., UPC-A+2, UPC-E+2, EAN 13+2). Six options are available. • If Decode UPC/EAN Only With Supplement als is selected, UPC/EAN symbols without suppleme ntals are not decoded .
7-13 Symbologies Decode UPC/EAN Supplementals (Continued) * Ignore Supplementals Autodiscriminate UPC/EAN Supplementals Enable 378/379 Supplemen tal Mode ³ 2 0 1 0 E 0 4.
7-14 Wasp WPS100 Product Reference Guide Decode UPC/EAN Supplementals (Continued) Enable 978 Supplemental Mode Enable Smart Su pplemen tal Mode.
7-15 Symbologies UPC/EAN Supplemental Redundancy With Autodiscriminate UPC/EAN Supplement als selected, this opt ion adjusts the number of times a symbol without suppleme nt als is decoded before transmission.
7-16 Wasp WPS100 Product Reference Guide T ransmit UPC-A/UPC-E/UPC-E1 Check Digit The check digit is the last character of the sym bol use d to verify the integrity of the data . Scan the ap propriate b ar code be low to trans mit the bar code data with or without the UPC- A, UPC-E or UPC-E1 check digit.
7-17 Symbologies T ransmit UPC-A/UPC-E/UPC-E1 Check Digit (Continued) * T ran smit UPC-E Check Digit Do Not T ransmit UPC-E Check Digit * T ransmit UPC-E1 Che ck Digit.
7-18 Wasp WPS100 Product Reference Guide T ransmit UPC-A/UPC-E/UPC-E1 Check Digit (Continued) Do Not T ransmit UPC-E1 Check Digit UPC-A Preamble Preamble characte rs are part of th e UPC sym bol consisting of Co untry Code and System Character .
7-19 Symbologies UPC-A Preamble (Continued) System Char acter & Coun try Code (< COUNTR Y CODE> <SYST EM CHARACTER> <DA T A>) UPC-E Preamble Preamble characte rs are part of th e UPC sym bol consisting of Co untry Code and System Character .
7-20 Wasp WPS100 Product Reference Guide UPC-E Preamble (Continued) System Char acter & Countr y Code (< COUNTR Y CODE> <SYST EM CHARACTER> <DA T A>) UPC-E1 Preamble Preamble characte rs are part of th e UPC sym bol consisting of Co untry Code and System Character .
7-21 Symbologies UPC-E1 Preamble (Continued) System Char acter & Coun try Code (< COUNTR Y CODE> <SYST EM CHARACTER> <DA T A>) Convert UPC-E to UPC-A When enabled , UPC-E (zero suppressed ) decoded data is converte d to UPC-A for mat before transmis sion.
7-22 Wasp WPS100 Product Reference Guide Convert UPC-E1 to UPC-A When enabled, UPC-E1 decoded dat a is converted to UPC-A format before transmission. After conver sion, the data follows UPC-A format and is af fected by UPC-A progr amming selections (e.
7-23 Symbologies EAN Zero Extend When enabled, this p arameter adds five leading zeros to decod ed EAN-8 symbols to make them compatible in format to EAN-13 symbols.
7-24 Wasp WPS100 Product Reference Guide UCC Coupon Ex tended Code The UCC Coupon Extended Code is an additional bar code adjacent to a UCC Coupon Code.
7-25 Symbologies Code 128 Enable/Disable Code 128 T o enable or disable Code 128, scan the approp riate bar code below . * Enable Code 128 Disabl e Code 128.
7-26 Wasp WPS100 Product Reference Guide Enable/Disable UCC/EAN-128 T o enable or disable UCC/EAN-128, scan the app ropriate bar code below . * Enable UCC/EAN-128 Disable UCC/EAN-128.
7-27 Symbologies Enable/Disable ISBT 128 ISBT 128 is a variant of Code 128 used in th e blood banking industry . T o enable or disable ISBT 128, scan the appropriate bar code be low . Concatenation of the ISBT dat a, if required, m ust be pe r formed in the host.
7-28 Wasp WPS100 Product Reference Guide Code 128 Decode Perfor mance This option offer s three levels of decode performance or “ag gressiveness” for Code 128 symbols. Increasing the performa nce level reduces the amount of required bar code orientation, which is useful if you are scanning very long and/or truncated bar codes.
7-29 Symbologies Code 128 Decode Performance Level This option offer s three levels of decode performance or “ag gressiveness” for Code 128 symbols. Increasing the performa nce level reduces the amount of required bar code orientation, which is useful if you are scanning very long and/or truncated bar co des.
7-30 Wasp WPS100 Product Reference Guide Code 39 Enable/Disable Code 39 T o enable or disable Code 39, scan th e appropriate bar code below . * Enable Co de 39 Disable Code 39 Note: When a large gap b.
7-31 Symbologies Enable/Disable T rioptic Code 39 T rioptic Code 39 is a variant of Code 39 used in the marking o f computer tape cartridges. T rioptic Code 39 symbols always cont ain six characters. T o enable or disab le T rioptic Code 39, scan the appr opriate ba r code below .
7-32 Wasp WPS100 Product Reference Guide Convert Code 39 to Code 32 Code 32 is a v ariant of Code 39 us ed by the Italian pharmace utical industry . Scan the appropriate b ar code below to enable or disable converting Code 3 9 to Code 32. Note: Code 39 must be enabled in order for this parameter to function.
7-33 Symbologies Code 32 Prefix Scan the ap propriate b ar code b elow to enab le or disable adding the prefix character “ A” to all Code 32 bar codes.
7-34 Wasp WPS100 Product Reference Guide Set Lengths for Code 39 The length of a code refer s to the number of character s (i.e., human readable characters), including check digit(s) th e code contains. L ength s for Code 39 may be set for any length, one or two discrete leng ths, or lengths withi n a specific range.
7-35 Symbologies Set Lengths for Code 39 (Continued) Code 39 - T wo Discrete Lengths Length Within Rang e - This option allows you to decode a Code 39 symbol with a specific length range. The length range is selected from numeric bar co des beginning on p ag e D-1 in Appendix D.
7-36 Wasp WPS100 Product Reference Guide Code 39 Check Digit V erification When this feature is enabled, the scanne r che cks the integrity of all Code 39 symbols to verify that the dat a complies with specified check digit algo rith m. Only those Code 39 symbols which include a modulo 43 check digit are decoded when this feature is enabled.
7-37 Symbologies T ransmit Code 39 Check Digit Scan a bar code below to tr ansmit Code 39 data with or without the check digit. T ransm it Code 39 Check Digit (Enable) * Do Not T ransmit C ode 39 Check Digit (Disable) Note: Code 39 Check Digit V erification must be enabled for this parameter to function.
7-38 Wasp WPS100 Product Reference Guide Enable/Disable Code 39 Full ASCII Code 39 Full ASCII is a variant of Code 39 which pairs character s to encode the full ASCII character set. T o enable or disable Code 39 Full ASCII, scan the appropriate bar code below .
7-39 Symbologies Code 39 Buf fering (Scan & Store) This feature allows th e scanner to accum u late data from mult iple Code 39 symbols. When you se lect the Scan and S tore option (Buf fer Code 39), all Code 39 symbols having a leading space as a first character are temporarily buf fered in the unit to be transmitted later .
7-40 Wasp WPS100 Product Reference Guide Code 39 Buf fering (Scan & Store)(Continued) * Do Not Buffer Code 39 While there is data in the tr ansmiss ion buffer , se lecting Do Not Buffer Code 39 is not allowed. The b uffer holds 200 by tes of info rmation.
7-41 Symbologies Note: The Clear Buffer cont ains only the dash (minus) character . In order to scan this command, be sure Code 39 length is set to include length 1. T ransmit Buffer There are two methods to tran smit the Code 39 buffer . 1. Scan the T ransmit Buffer bar code below .
7-42 Wasp WPS100 Product Reference Guide Overfilling T ransmission Buffer The Code 39 buf fer holds 200 characters. If t he symbol just read result s in an overflow of the transmissio n buffer: • The scanner indicates that the symb ol was rejected by issuin g three long, high beeps.
7-43 Symbologies Code 39 Decode Performance This option offer s three levels of decode performance or “ag gressiveness” for Code 39 symbols. Increasing the performa nce level reduces the amount of required bar code orientation, which is useful if you are scanning very long and/or truncated bar co des.
7-44 Wasp WPS100 Product Reference Guide Code 39 Decode Performance Level This option offer s three levels of decode performance or “ag gressiveness” for Code 39 symbols. Increasing the performa nce level reduces the amount of required bar code orientation, which is useful if you are scanning very long and/or truncated bar codes.
7-45 Symbologies Code 93 Enable/Disable Code 93 T o enable or disable Code 93, scan th e appropriate bar code below . Enable Code 93 * Disabl e Code 93.
7-46 Wasp WPS100 Product Reference Guide Set Lengths for Code 93 The length of a code refer s to the number of character s (i.e., human readable characters), including check digit(s) th e code contains. L ength s for Code 93 may be set for any length, one or two discrete lengths, or lengths within a specific range.
7-47 Symbologies Set Lengths for Code 93 (Continued) Code 93 - T wo Discrete Lengths Length Within Rang e - This option allows you to decode a Code 93 symbol with a specific length range. The length range is selected from numeric bar co des beginning on p ag e D-1 in Appendix D.
7-48 Wasp WPS100 Product Reference Guide Code 1 1 Code 1 1 T o enable or disable Code 1 1, scan the appropriate bar code below . Enable Code 1 1 * Disable Code 1 1.
7-49 Symbologies Set Lengths for Code 1 1 The length of a code refer s to the number of character s (i.e., human readable characters), including check digit(s) the code con tains. Lengths for Code 1 1 may be set for any length, one or two discrete lengths, or lengths within a specific range.
7-50 Wasp WPS100 Product Reference Guide Set Lengths for Code 1 1 (Contin ued) Length Within Rang e - This option allows you to decode a Code 1 1 symbol with a specific length range. The length range is selected from numeric ba r codes beginning on p ag e D-1 in Appendix D.
7-51 Symbologies Code 1 1 Check Digit V erification This feature allows th e scanner to check the in tegrity of all Code 1 1 symbols to verify that the data complies with the specif ied check di git algorithm. This selects the check digit mechanism for the decoded Code 1 1 bar code.
7-52 Wasp WPS100 Product Reference Guide T ransmit Code 1 1 Check Digits This feature selects wheth er or not to transmit the Code 1 1 check digit(s). T ransmit Co de 1 1 Check Digit (Enable) * Do Not T ransmit C ode 1 1 Che ck Digit (Disable) Note: Code 1 1 Check Digit Verification mu st be enabled for this p arameter to function.
7-53 Symbologies Interleaved 2 of 5 (ITF) Enable/Disable In terleaved 2 of 5 T o enable or disable Interleaved 2 of 5, scan the appropriate bar code below , and select an Interleaved 2 of 5 length from the following pages.
7-54 Wasp WPS100 Product Reference Guide Set Lengths for Interleaved 2 of 5 The length of a code refer s to the number of character s (i.e., human readable characters), including c heck digit(s) the code c ontains. L engths for I 2 of 5 may be set for any length, one or two discrete leng ths, or lengths within a specific range.
7-55 Symbologies Set Lengths for Interleaved 2 of 5 (Continued) Length Within Rang e - This option allows you to decode an I 2 of 5 symbol with a specific length range. The length range is selected from numeric bar co des beginning on p ag e D-1 in Appendix D.
7-56 Wasp WPS100 Product Reference Guide I 2 of 5 Check Digit V erification When this feature is enabled, th e scanner checks the integrity of all I 2 of 5 symbols to verify the data complies with either the specified Un iform Symbology S pecification (USS), or the Optical Product Code Coun cil (OPCC) check digit algorithm.
7-57 Symbologies T ransmit I 2 of 5 Check Digit Scan the appropri ate bar code below to transmit I 2 of 5 data with or without the ch eck digit. T ransm it I 2 of 5 Check Digit (Enable) * Do Not T ran.
7-58 Wasp WPS100 Product Reference Guide Convert I 2 of 5 to EAN-13 This parameter converts a 14 characte r I 2 of 5 code into EAN-13, and transmit s to the host as EAN-13. In order to accomplish this, the I 2 of 5 code must be enabled , and the code must have a leading zero an d a valid EAN-13 check digit.
7-59 Symbologies Discrete 2 of 5 (DTF) Enable/Disable Discrete 2 of 5 T o enable or disable Discrete 2 of 5, scan the appropriate bar code below . Enable Discrete 2 of 5 * Disable Discrete 2 of 5.
7-60 Wasp WPS100 Product Reference Guide Set Lengths for Discrete 2 of 5 The length of a code refer s to the number of character s (i.e., human readable characters), including c heck digit(s) the code c ontains. L engths for D 2 of 5 may be set for any length, one or two discrete leng ths, or lengths within a specific range.
7-61 Symbologies Set Lengths for Discrete 2 of 5 (Continued) Length Within Rang e - This option allows you to decode an D 2 of 5 symbol with a specific length range. The length range is selected from numeric bar co des beginning on p ag e D-1 in Appendix D.
7-62 Wasp WPS100 Product Reference Guide Chinese 2 of 5 Enable/Disable Chinese 2 of 5 T o enable or disable Chinese 2 of 5, scan the appropria te bar code below .
7-63 Symbologies Codabar (NW - 7) Enable/Disable Codabar T o enable or disable Codaba r , scan the appropriate ba r code below . Enable Codabar * Disable Codabar Note: When a large gap bar code is en .
7-64 Wasp WPS100 Product Reference Guide Set Lengths for Codabar The length of a code refer s to the number of character s (i.e., human readable characters), including check digit(s) the code contains. Le ngths for Codabar may be set for any length, one or two discrete leng ths, or lengths within a specific range.
7-65 Symbologies Set Lengths for Codabar (Continued) Length Within Rang e - This option allows you to decode a Codabar symbol with a specific length range.
7-66 Wasp WPS100 Product Reference Guide CLSI Editing When enabled, this p arameter strip s the start and stop characters and insert s a space afte r the first, fif th, and tenth characters o f a 14 -charact er Codaba r symbol. Ena ble this featur e if your host system requires this data format.
7-67 Symbologies NOTIS Editing When enabled, this p arameter strip s the start and stop characters from a decoded Co dabar symbol. Enable this feature if your ho st system requires this data format.
7-68 Wasp WPS100 Product Reference Guide MSI Enable/Disable MSI T o enable or d isable MSI, scan the appropriate bar code below . Enable MSI * Disable MSI.
7-69 Symbologies Set Lengths for MSI The length of a code refer s to the number of character s (i.e., human readable characters), including check digit(s) the code cont ains. Lengths for MSI may be set for any length, one or two dis crete length s, or length s within a specific ran ge.
7-70 Wasp WPS100 Product Reference Guide Set Lengths for MSI (Continued) Length Within Rang e - This option allows you to decode an MSI symbol with a specific length range. The length range is selected from numeric ba r codes beginning on p age D-1 in Appendix D.
7-71 Symbologies MSI Check Digits With MSI symbols, one check digit is mandatory and always ver ified by the reader . The second check digit is optional . If your MSI codes include two check digits, enable the verification of the se cond check di git by scanning the barcod e below .
7-72 Wasp WPS100 Product Reference Guide T ransmit MSI Check Digit(s) Scan a bar code below to transmit M SI data with or wit hout the ch eck digit. T ran smit MSI Check Digit(s ) (Enable) * Do Not T .
7-73 Symbologies MSI Check Digit Algorithm T wo algorithms are possible for the verificati on of the second MSI check digit. Select the bar code bel ow corresponding to the a lgorithm used to encode your check digit.
7-74 Wasp WPS100 Product Reference Guide RSS (Reduced Sp ace Symbology) The variant s of RSS are RSS 14, RSS Exp anded, and RSS Limite d. The limited and expanded ve rsions have stacked variant s. Scan the appropriate bar code below to enable or disable each varian t of RSS.
7-75 Symbologies RSS Limited Enable RSS Limited * Disable RSS Limited.
7-76 Wasp WPS100 Product Reference Guide RSS Expanded * Enable RSS Exp anded Disable RSS Expanded.
7-77 Symbologies Convert RSS to UPC/EAN The 14-digit Global T rade Item Number (G TIN) format will become a standard by January 2005 and will uniquely identify products worldwid e. Although it is defined as a 14-digit structure, the barcode ma y contain 13 digit s (EAN -13), 12 digit s (UPC), or 8 digit s (EAN-8) of data.
7-78 Wasp WPS100 Product Reference Guide Convert RSS to UPC/EAN (Continued) or (if the UPC-A Preamble is "System Character") or (if the UPC-A Preamble is "No Preamble") E.
7-79 Symbologies Convert RSS to UPC/EAN (Continued) Enable Convert RSS to UPC/EAN *Disable Convert RSS to UPC/EAN.
7-80 Wasp WPS100 Product Reference Guide Symbology - Sp ecific Security Levels Redundancy Level The WPS100 of fer four levels of decode redundancy . Higher redundancy levels are selected for decrea sing levels of bar code qu ality . As redundancy levels increase, the scanner ’s aggressiveness decre ases.
7-81 Symbologies Redundancy Level 2 The following code types must be successfully read twice before being de coded: T able 7-3. Redundancy Level 2 Code T ypes Redundancy L evel 2 Redundancy Level 3 Level 3 ensures that the enabl ed linear bar code types are read twice before repor ting a good decode.
7-82 Wasp WPS100 Product Reference Guide Redundancy Level 4 The following code types must be successfully read three times be fore being decoded: T able 7-5.
7-83 Symbologies Security Level The WPS100 of fer four levels of decode security for the delta bar co des. These include the Code 128 family , UPC/EAN, Code 93 and Scanlet. Increasing levels of security are provided for decrea sing levels of bar code quality .
7-84 Wasp WPS100 Product Reference Guide Security Level 2 Choose this option if Security Lev el 1 fails to eliminate misdecodes. Security Leve l 2 Security Level 3 If you have tried Security Level 2, and are still experiencing misd ecodes, select this security level.
7-85 Symbologies Symbology - Intercharacter Gap The Code 39 and Codabar symbologies have an intercharacter gap that is customarily quite small. Due to various bar code-printing technolog ies, this gap may grow larger than the maximum size allowed, causing the scann er to be unable to decode the symbol.
7-86 Wasp WPS100 Product Reference Guide.
8-1 Chapter 8 Miscellaneous Scanner Options Introduction This chapter inclu des commonly used bar codes to customize how your dat a is transmitted to your host device. In addition to these bar codes for da ta formatting, refer to each host chapter for the appropr iate host connections and host device features for your scann er .
8-2 Wasp WPS100 Product Reference Guide Scanning Sequence Examples In most cases you need only scan one bar code to set a specific parameter value. Parameters , such as Prefix V alue , require that you scan seve ral bar codes in the prope r sequence. Refer to each in dividual p arameter for descriptions of this proced ure.
8-3 Miscellaneous Scanner Options Miscellaneous Default Parameters T able 8-1 list s the defaults for miscellaneous scanner options p arameters. If you wish to change any option, scan the appropriate ba r code(s) provided in the Miscellaneous Scanner Parameters section beginning on page 8-4 .
8-4 Wasp WPS100 Product Reference Guide Miscellaneous Scanner Parameters T ransmit Code ID Character A Code ID character identif ies the code type of a scanned bar code.
8-5 Miscellaneous Scanner Options T ransmit Code ID Ch aracter (Continued) * None Prefix/Suf fix V alues A prefix/suf fix may be appended to scan data fo r use in da ta editing. These value s are set by scanning a four-dig it number (i.e., four bar codes) that corresponds to key codes for various termin als.
8-6 Wasp WPS100 Product Reference Guide Prefix/Suf fix V alues (Continued) Set V alue 3 Set V alue 4.
8-7 Miscellaneous Scanner Options Prefix/Suf fix V alues (Continued) Set V alue 5 Set FN1 Substitution V alue (V alue 6).
8-8 Wasp WPS100 Product Reference Guide FN1 Substitution V alues The Wedg e and USB HID Keyboard hosts suppor t a FN1 Substitution feature. In this feature, if e nabled, a ny FN1 ch aracter (0x 1b) in an EAN128 barcode is substituted for this value. This value defaults to 7013 (Ente r Key) 1.
8-9 Miscellaneous Scanner Options Scan Data Options T o change the Scan Dat a T ransmission Format, scan the Scan Options bar code below . Then select one of four options: •D a t a A s I s • <D.
8-10 Wasp WPS100 Product Reference Guide Scan Data T ransmissi on Format (Continued) *Data As Is <DA T A> <SUFFIX> <PREFIX> <DA T A>.
8-1 1 Miscellaneous Scanner Options Scan Data Tr ansmissi on Format (Continued) <PREFIX> <DA T A> <SUFFIX> Enter Data Format Cancel.
8-12 Wasp WPS100 Product Reference Guide T ransmit “No Read” Message Scan a bar code below to sele ct whether or not a “No Read” mess age is transm itted. When enabled, th e character s NR are tr ansmitted wh en a bar code is not decoded. Any p refixes or suffixes which ar e enabled are appended around th is message.
9-1 Chapter 9 Advanced Dat a Formatting Introduction Advanced Data Form atting (ADF) is a means of customizing dat a before transmission to your host device. Scan dat a can be edited to suit your particular require ments. ADF can be implemented throug h scanning a related series of bar codes, which begin on pag e 9-7.
9-2 Wasp WPS100 Product Reference Guide Using ADF Bar Codes When you program a rule, make sure the rule is logically correct. Plan ahead before you start scanning . T o program each dat a formatting rule: • St art the Rule . Scan the Begin New Rule bar code on p age 9-7.
9-3 Advanced Data Formatting The distribution center uses a PC with dedicat ed control char acters for manufacturer ID <CTRL M>, part number <CTR L P>, and destina tion code <CTRL D>. At this center the UPC data is treate d as manufacturer ID code.
9-4 Wasp WPS100 Product Reference Guide If you made any mist akes while entering this rule, scan the Quit Ente ring Rules bar code on page 9-9. If you a lready saved the rule, scan the Erase Pr eviously Saved Rule bar code on page 9-9 .
9-5 Advanced Data Formatting T o switch betwe en the two sets of rules , a “switching ru le” must be prog rammed. Th is rule specifies wha t type of bar code m ust be sc anned to switch between the ru le sets.
9-6 Wasp WPS100 Product Reference Guide For example, if the THIRD rule st ates: When scanning a bar code of any length , send all data , then send the ENTER key . And the SECOND rule states: When scanning a Code 128 bar code of length 12, send the first f our characters, then send the ENTER key , then send all remaining dat a.
9-7 Advanced Data Formatting S pecial Commands Pause Duration This parameter allows a pause to be inserted in the data transmissio n. Pauses are set by scanning a two-digit nu mber (i.e., two bar codes), and a re measured in 0.1 se cond intervals. For example, scan ni ng bar codes “0” and “1” inser ts a 0.
9-8 Wasp WPS100 Product Reference Guide Save Rule Scan this bar code to save the rule you entered. Erase Use these bar codes to erase criteria, actions, or rules.
9-9 Advanced Data Formatting Erase (Continued) Quit Entering Rules Scan this bar code to quit entering rules. Erase Previously Saved Rule Erase All Rules Quit Entering Rules.
9-10 Wasp WPS100 Product Reference Guide Disable Rule Set Use these bar codes to disable rule set s. Disable Rule Set 1 Disable Rule Set 2 Disable Rule Set 3.
9-1 1 Advanced Data Formatting Disable Rule Set (Continued) Disable Rule Set 4 Disable All Rule Sets.
9-12 Wasp WPS100 Product Reference Guide Criteria Code T ypes Select any number of code types to be affe cted. All selected codes must be scanned in succession, prior to sele cting ot her criteria. If you don't select a code type, all code types will be affected.
9-13 Advanced Data Formatting Code T ypes (Continued) RSS 14 RSS Limited RSS Exp anded.
9-14 Wasp WPS100 Product Reference Guide Code T ypes (Continued) Scan the ba r codes for all code typ es desired b efore selec ting other criteria. Code 128 D 2 OF 5.
9-15 Advanced Data Formatting Code T ypes (Continued) Scan the ba r codes for all code typ es desired b efore selec ting other criteria. I 2 OF 5 IA T A 2 OF 5 Code 93.
9-16 Wasp WPS100 Product Reference Guide Code T ypes (Continued) Scan the ba r codes for all code typ es desired b efore selec ting other criteria. UPC-A UPC-E EAN-8.
9-17 Advanced Data Formatting Code T ypes (Continued) EAN-13 EAN 128 MSI.
9-18 Wasp WPS100 Product Reference Guide Code T ypes (Continued) UPC-E1 Bookland T rioptic.
9-19 Advanced Data Formatting Code T ypes (Continued) Chinese 2 of 5 Coupon Cod e.
9-20 Wasp WPS100 Product Reference Guide Code Lengths Define the number of characters t he selected code type must contain. If you don't select a code length, selected code types of any length will be affec ted . Scan these bar co des to define the number of characters th e selected code types must contain.
9-21 Advanced Data Formatting Code Lengths (Continued) 4 Characters 5 Characters 6 Characters.
9-22 Wasp WPS100 Product Reference Guide Code Lengths (Continued) 7 Characters 8 Characters 9 Characters.
9-23 Advanced Data Formatting Code Lengths (Continued) 10 Characters 1 1 C haracters 12 Characters.
9-24 Wasp WPS100 Product Reference Guide Code Lengths (Continued) 13 Characters 15 Characters 14 Characters.
9-25 Advanced Data Formatting Code Lengths (Continued) 16 Characters 17 Characters 18 Characters.
9-26 Wasp WPS100 Product Reference Guide Code Lengths (Continued) 20 Chara cters 19 Characters 21 Characters.
9-27 Advanced Data Formatting Code Lengths (Continued) 23 Chara cters 24 Characters 22 Characters.
9-28 Wasp WPS100 Product Reference Guide Code Lengths (Continued) 25 Characters 26 Characters 27 Characters.
9-29 Advanced Data Formatting Code Lengths (Continued) 28 Characters 29 Characters 30 Characters 0.
9-30 Wasp WPS100 Product Reference Guide Message Containing A Specific Data S tring Use this feature to select whether the forma tting af fects data that begins with a specific character or dat a string, or contai ns a specific character or data string.
9-31 Advanced Data Formatting Specific S tring, Any Location Scan this bar code, then, u sing the Numeric Bar Codes on page D-1, scan a two-digit number repr esenting the position (use a leading “zer o” if necessary).
9-32 Wasp WPS100 Product Reference Guide Rule Belongs T o Set Select the set a rule be longs to. (There are four possible rule sets.) Refer to Alternate Rule Sets on p age 9-4 for more information a bout rule sets. Scan a bar code below to selec t which set a rule belongs to.
9-33 Advanced Data Formatting Rule Belongs T o Set (Continued) Rule Belong s T o Set 3 Rule Belongs T o Set 4.
9-34 Wasp WPS100 Product Reference Guide Actions Select how to format the dat a for transmissio n. Send Data Send all data that remain s, send all data up to a specific character selected from the Alphanumeric Keyboard on page 9-178, or send the next N characters.
9-35 Advanced Data Formatting Send Data (Continued) Send Next 3 Characters Send Next 2 Characters Send Next 4 Characters.
9-36 Wasp WPS100 Product Reference Guide Send Data (Continued) Send Next 5 Characters Send Next 7 Characters Send Next 6 Characters.
9-37 Advanced Data Formatting Send Data (Continued) Send Next 8 Characters Send Next 9 Characters Send Next 10 Characters.
9-38 Wasp WPS100 Product Reference Guide Send Data (Continued) Send Next 11 C h a r a c t e r s Send Next 12 Characters Send Next 13 Characters.
9-39 Advanced Data Formatting Send Data (Continued) Send Next 16 Characters Send Next 14 Characters Send Next 15 Characters.
9-40 Wasp WPS100 Product Reference Guide Send Data (Continued) Send Next 19 Characters Send Next 18 Characters Send Next 17 Characters.
9-41 Advanced Data Formatting Send Data (Continued) Send Next 20 Characters.
9-42 Wasp WPS100 Product Reference Guide Setup Field(s) T able 9-1. Setup Field(s) Definitions Parameter Descript ion Page Move Cursor Move Cursor T o a Character Scan the Move Cursor T o Character bar code on page 9-4 3, then any printable ASCII chara cter from the Alphanumeric Keybo ard .
9-43 Advanced Data Formatting Move Cursor Scan a bar code below to move the c ursor in rela tion to a sp ecified char acter . Then enter a character by scanning a b ar code from the Alphanumeri c Keyboard beginning on p age 9- 178. Note: If there is no match when the rule is interpreted an d the rule fails, the next rule is checked.
9-44 Wasp WPS100 Product Reference Guide Move Cursor (Continued) Scan the barcod e below to insert a pause in the trans mission of data. The length of this pause is controlled by the value of the Pause Duration p arameter . Skip Ahead Use the following bar codes to skip ah ead characters.
9-45 Advanced Data Formatting Skip Ahead (Continued) Skip Ahead 4 Characters Skip Ahead 3 Characters Skip Ahead 2 Characters.
9-46 Wasp WPS100 Product Reference Guide Skip Ahead (Continued) Skip Ahead 5 Characters Skip Ahead 6 Characters Skip Ahead 7 Characters.
9-47 Advanced Data Formatting Skip Ahead (Continued) Skip Ahead 9 Characters Skip Ahead 10 Characters Skip Ahead 8 Characters.
9-48 Wasp WPS100 Product Reference Guide Skip Back Use the following bar codes to skip ba ck characters. Skip Back 1 Characters Skip Back 3 Characters Skip Back 2 Characters.
9-49 Advanced Data Formatting Skip Back (Continued) Skip Back 4 Characters Skip Back 6 Character s Skip Back 5 Characters.
9-50 Wasp WPS100 Product Reference Guide Skip Back (Continued) Skip Back 7 Characters Skip Back 8 Characters Skip Back 9 Characters.
9-51 Advanced Data Formatting Skip Back (Continued) Send Preset V alue Use these bar codes to send preset values. Skip Back 10 Characters Send V alue 2 Send V alue 1.
9-52 Wasp WPS100 Product Reference Guide Send Preset V a lue (Continued) Send V alue 4 Send V alue 3 Send V alue 5.
9-53 Advanced Data Formatting Send Preset V a lue (Continued) Modify Data Modify data in the ways listed. The following actions work for all send commands that follow it within a rule.
9-54 Wasp WPS100 Product Reference Guide Modify Data (Continued) Use the bar codes below to modify data. Remove All Sp aces Crunch All Sp aces Stop Sp ace Removal.
9-55 Advanced Data Formatting Modify Data (Continued) Pad Dat a with Sp aces T o pad data to the le ft, scan the ba r code con taining the desire d numbe r of spaces.
9-56 Wasp WPS100 Product Reference Guide . Pad Dat a with Sp aces (Continued) Pad Sp aces T o Length 2 Pad Sp aces T o Length 4 Pad Sp aces T o Length 3.
9-57 Advanced Data Formatting Pad Dat a with Sp aces (Continued) Pad Sp aces T o Length 5 Pad Sp aces T o Length 6 Pad Sp aces T o Length 7.
9-58 Wasp WPS100 Product Reference Guide Pad Dat a with Sp aces (Continued) Pad Sp aces T o Length 9 Pad Sp aces T o Length 10 Pad Sp aces T o Length 8.
9-59 Advanced Data Formatting Pad Dat a with Sp aces (Continued) Pad Sp aces T o Length 12 Pad Sp aces T o Length 1 1 Pad Sp aces T o Length 13.
9-60 Wasp WPS100 Product Reference Guide Pad Dat a with Sp aces (Continued) Pad Sp aces T o Length 14 Pad Sp aces T o Length 16 Pad Sp aces T o Length 15.
9-61 Advanced Data Formatting Pad Dat a with Sp aces (Continued) Pad Sp aces T o Length 17 Pad Sp aces T o Length 18 Pad Sp aces T o Length 19.
9-62 Wasp WPS100 Product Reference Guide Pad Dat a with Sp aces (Continued) Pad Sp aces T o Length 20 Pad Sp aces T o Length 21 Pad Sp aces T o Length 22.
9-63 Advanced Data Formatting Pad Dat a with Sp aces (Continued) Pad Sp aces T o Length 24 Pad Sp aces T o Length 23 Pad Sp aces T o Length 25.
9-64 Wasp WPS100 Product Reference Guide Pad Dat a with Sp aces (Continued) Pad Sp aces T o Length 26 Pad Sp aces T o Length 28 Pad Sp aces T o Length 27.
9-65 Advanced Data Formatting Pad Dat a with Sp aces (Continued) Pad Sp aces T o Length 29 Pad Sp aces T o Length 30 Stop Pad Sp aces.
9-66 Wasp WPS100 Product Reference Guide Pad Data with Zeros T o pad data to the le ft, scan the ba r code con taining the desire d numbe r of zeros. This parameter is activate d by Send commands.
9-67 Advanced Data Formatting Pad Data with Zeros (Continued) Pad Zeros T o Length 4 Pad Zeros T o Length 5 Pad Zeros T o Length 6.
9-68 Wasp WPS100 Product Reference Guide Pad Data with Zeros (Continued) Pad Zeros T o Length 8 Pad Zeros T o Length 7 Pad Zeros T o Length 9.
9-69 Advanced Data Formatting Pad Data with Zeros (Continued) Pad Zeros T o Length 10 Pad Zeros T o Length 12 Pad Zeros T o Length 1 1.
9-70 Wasp WPS100 Product Reference Guide Pad Data with Zeros (Continued) Pad Zeros T o Length 13 Pad Zeros T o Length 14 Pad Zeros T o Length 15.
9-71 Advanced Data Formatting Pad Data with Zeros (Continued) Pad Zeros T o Length 17 Pad Zeros T o Length 18 Pad Zeros T o Length 16.
9-72 Wasp WPS100 Product Reference Guide Pad Data with Zeros (Continued) Pad Zeros T o Length 19 Pad Zeros T o Length 20 Pad Zeros T o Length 21.
9-73 Advanced Data Formatting Pad Data with Zeros (Continued) Pad Zeros T o Length 23 Pad Zeros T o Length 22 Pad Zeros T o Length 24.
9-74 Wasp WPS100 Product Reference Guide Pad Data with Zeros (Continued) Pad Zeros T o Length 25 Pad Zeros T o Length 27 Pad Zeros T o Length 26.
9-75 Advanced Data Formatting Pad Data with Zeros (Continued) Pad Zeros T o Length 28 Pad Zeros T o Length 29 Pad Zeros T o Length 30.
9-76 Wasp WPS100 Product Reference Guide Pad Data with Zeros (Continued) Beeps Select a beep sequence fo r each ADF rule. Stop Pa d Zeros Beep Once Beep T wice.
9-77 Advanced Data Formatting Beeps (Continued) Send Keystroke (Control Characters and Keyboard Characters) Control Charact ers Scan the “Send __” bar code for the keystroke you wish to send.
9-78 Wasp WPS100 Product Reference Guide Control Characters (Continued) Send Control C Send Control B Send Control D.
9-79 Advanced Data Formatting Control Characters (Continued) Send Con trol E Send Control G Send Control F.
9-80 Wasp WPS100 Product Reference Guide Control Characters (Continued) Send Control H Send Control I Send Control J.
9-81 Advanced Data Formatting Control Characters (Continued) Send Control K Send Control L Send Control M.
9-82 Wasp WPS100 Product Reference Guide Control Characters (Continued) Send Control P Send Control O Send Control N.
9-83 Advanced Data Formatting Control Characters (Continued) Send Control Q Send Control S Send Control R.
9-84 Wasp WPS100 Product Reference Guide Control Characters (Continued) Send Control T Send Control U Send Control V.
9-85 Advanced Data Formatting Control Characters (Continued) Send Control X Send Control Y Send Control W.
9-86 Wasp WPS100 Product Reference Guide Control Characters (Continued) Send Control [ Send Control Z Send Control .
9-87 Advanced Data Formatting Control Characters (Continued) Send Control ] Send Control - Send Control 6.
9-88 Wasp WPS100 Product Reference Guide Keyboard Characters Scan the “Send __” bar code for the keyboard characters you wish to send. Send Sp ace Send ! Send “.
9-89 Advanced Data Formatting Keyboard Characters (Continued) Send # Send $ Send %.
9-90 Wasp WPS100 Product Reference Guide Keyboard Characters (Continued) Send ‘ Send & Send (.
9-91 Advanced Data Formatting Keyboard Characters (Continued) Send ) Send + Send *.
9-92 Wasp WPS100 Product Reference Guide Keyboard Characters (Continued) Send , Send - Send ..
9-93 Advanced Data Formatting Keyboard Characters (Continued) Send 0 Send 1 Send /.
9-94 Wasp WPS100 Product Reference Guide Keyboard Characters (Continued) Send 3 Send 2 Send 4.
9-95 Advanced Data Formatting Keyboard Characters (Continued) Send 5 Send 7 Send 6.
9-96 Wasp WPS100 Product Reference Guide Keyboard Characters (Continued) Send 8 Send 9 Send :.
9-97 Advanced Data Formatting Keyboard Characters (Continued) Send ; Send < Send =.
9-98 Wasp WPS100 Product Reference Guide Keyboard Characters (Continued) Send ? Send > Send @.
9-99 Advanced Data Formatting Keyboard Characters (Continued) Send A Send C Send B.
9-100 Wasp WPS100 Product Reference Guide Keyboard Characters (Continued) Send D Send E Send F.
9-101 Advanced Data Formatting Keyboard Characters (Continued) Send H Send I Send G.
9-102 Wasp WPS100 Product Reference Guide Keyboard Characters (Continued) Send K Send J Send L.
9-103 Advanced Data Formatting Keyboard Characters (Continued) Send M Send O Send N.
9-104 Wasp WPS100 Product Reference Guide Keyboard Characters (Continued) Send P Send Q Send R.
9-105 Advanced Data Formatting Keyboard Characters (Continued) Send S Send T Send U.
9-106 Wasp WPS100 Product Reference Guide Keyboard Characters (Continued) Send X Send W Send V.
9-107 Advanced Data Formatting Keyboard Characters (Continued) Send Y Send [ Send Z.
9-108 Wasp WPS100 Product Reference Guide Keyboard Characters (Continued) Send Send ] Send ^.
9-109 Advanced Data Formatting Keyboard Characters (Continued) Send ‘ Send a Send _.
9-1 10 Wasp WPS100 Product Reference Guide Keyboard Characters (Continued) Send c Send b Send d.
9 - 111 Advanced Data Formatting Keyboard Characters (Continued) Send e Send g Send f.
9-1 12 Wasp WPS100 Product Reference Guide Keyboard Characters (Continued) Send h Send i Send j.
9-1 13 Advanced Data Formatting Keyboard Characters (Continued) Send k Send l Send m.
9-1 14 Wasp WPS100 Product Reference Guide Keyboard Characters (Continued) Send p Send n Send o.
9-1 15 Advanced Data Formatting Keyboard Characters (Continued) Send q Send s Send r.
9-1 16 Wasp WPS100 Product Reference Guide Keyboard Characters (Continued) Send t Send u Send v.
9-1 17 Advanced Data Formatting Keyboard Characters (Continued) Send x Send y Send w.
9-1 18 Wasp WPS100 Product Reference Guide Keyboard Characters (Continued) Send { Send z Send |.
9-1 19 Advanced Data Formatting Keyboard Characters (Continued) Send AL T Characters Send } Send ~ Send Alt 2.
9-120 Wasp WPS100 Product Reference Guide Send AL T Characters (Continued) Send Alt A Send Alt C Send Alt B.
9-121 Advanced Data Formatting Send AL T Characters (Continued) Send Alt D Send Alt E Send Alt F.
9-122 Wasp WPS100 Product Reference Guide Send AL T Characters (Continued) Send Alt H Send Alt I Send Alt G.
9-123 Advanced Data Formatting Send AL T Characters (Continued) Send Alt K Send Alt J Send Alt L.
9-124 Wasp WPS100 Product Reference Guide Send AL T Characters (Continued) Send Al t M Send Alt O Send Alt N.
9-125 Advanced Data Formatting Send AL T Characters (Continued) Send Alt P Send Alt Q Send Alt R.
9-126 Wasp WPS100 Product Reference Guide Send AL T Characters (Continued) Send Alt S Send Alt T Send Al t U.
9-127 Advanced Data Formatting Send AL T Characters (Continued) Send Alt X Send Alt V Send Alt W.
9-128 Wasp WPS100 Product Reference Guide Send AL T Characters (Continued) Send Alt Y Send Alt [ Send Alt Z.
9-129 Advanced Data Formatting Send AL T Characters (Continued) Send Alt Send Alt ] Send Alt 6.
9-130 Wasp WPS100 Product Reference Guide Send AL T Characters (Continued) Send Keyp ad Ch aracters Send Alt - Send Keypad * Send Keyp ad +.
9-131 Advanced Data Formatting Send Keypad Characters (Continued) Send Keyp ad . Send Keyp ad - Send Keypad /.
9-132 Wasp WPS100 Product Reference Guide Send Keypad Characters (Continued) Send Keyp ad 0 Send Keypad 2 Send Keyp ad 1.
9-133 Advanced Data Formatting Send Keypad Characters (Continued) Send Keypad 5 Send Keypad 4 Send Keyp ad 3.
9-134 Wasp WPS100 Product Reference Guide Send Keypad Characters (Continued) Send Keypad 6 Send Keypad 8 Send Keypad 7.
9-135 Advanced Data Formatting Send Keypad Characters (Continued) Send Keypad 9 Send Keyp ad Enter Send Keyp ad Numlock.
9-136 Wasp WPS100 Product Reference Guide Send Keypad Characters (Continued) Send Break Key Send Delete Key Send Page Up Key.
9-137 Advanced Data Formatting Send Keypad Characters (Continued) Send End Key Send Page Down Key Send Pause Key.
9-138 Wasp WPS100 Product Reference Guide Send Keypad Characters (Continued) Send Backspace Key Send Scroll Lock Key Send T ab Key.
9-139 Advanced Data Formatting Send Keypad Characters (Continued) Send Insert Key Send Home Key Send Print Screen Key.
9-140 Wasp WPS100 Product Reference Guide Send Keypad Characters (Continued) Send Enter Key Send Up Arrow Key Send Escape Key.
9-141 Advanced Data Formatting Send Keypad Characters (Continued) Send Lef t Arrow Key Send Down Arrow Key Send Right Arrow Key.
9-142 Wasp WPS100 Product Reference Guide Send Keypad Characters (Continued) Send Function Key Send Back T ab Character Send F1 Key Send F2 Key.
9-143 Advanced Data Formatting Send Function Key (Continued) Send F4 Key Send F3 Key Send F5 Key.
9-144 Wasp WPS100 Product Reference Guide Send Function Key (Continued) Send F6 Key Send F8 Key Send F7 Key.
9-145 Advanced Data Formatting Send Function Key (Continued) Send F9 Key Send F10 Key Send F1 1 Key.
9-146 Wasp WPS100 Product Reference Guide Send Function Key (Continued) Send F12 Key Send F14 Key Send F13 Key.
9-147 Advanced Data Formatting Send Function Key (Continued) Send F15 Key Send F16 Key Send F17 Key.
9-148 Wasp WPS100 Product Reference Guide Send Function Key (Continued) Send F18 Key Send F20 Key Send F19 Key.
9-149 Advanced Data Formatting Send Function Key (Continued) Send F21 Key Send F22 Ke y Send F23 Key.
9-150 Wasp WPS100 Product Reference Guide Send Function Key (Continued) Send F24 Key Send F25 Key Send F26 Key.
9-151 Advanced Data Formatting Send Function Key (Continued) Send F28 Key Send F27 Key Send F29 Key.
9-152 Wasp WPS100 Product Reference Guide Send Function Key (Continued) Send PF1 Key Send PF2 Key Send F30 Key.
9-153 Advanced Data Formatting Send Function Key (Continued) Send PF4 Key Send PF5 Key Send PF3 Key.
9-154 Wasp WPS100 Product Reference Guide Send Function Key (Continued) Send PF6 Key Send PF8 Key Send PF7 Key.
9-155 Advanced Data Formatting Send Function Key (Continued) Send PF10 Ke y Send PF9 Key Send PF1 1 Key.
9-156 Wasp WPS100 Product Reference Guide Send Function Key (Continued) Send PF12 Ke y Send PF14 Key Send PF13 Key.
9-157 Advanced Data Formatting Send Function Key (Continued) Send PF15 Key Send PF16 Ke y Send PF17 Key.
9-158 Wasp WPS100 Product Reference Guide Send Function Key (Continued) Send PF18 Key Send PF20 Key Send PF19 Key.
9-159 Advanced Data Formatting Send Function Key (Continued) Send PF21 Key Send PF22 Key Send PF23 Key.
9-160 Wasp WPS100 Product Reference Guide Send Function Key (Continued) Send PF24 Key Send PF25 Key Send PF26 Key.
9-161 Advanced Data Formatting Send Function Key (Continued) Send PF28 Key Send PF27 Key Send PF29 Key.
9-162 Wasp WPS100 Product Reference Guide Send Function Key (Continued) Send Right Control Key The “Send Right Cont rol Key” action will send a t ap (press and release) of the Right Control Key .
9-163 Advanced Data Formatting Send Graphic User Interface Characters The “Send Graphic User Interface Character” actions will tap the specified key while holding the System Dependant Gr aphic User Interface (GUI) Key .
9-164 Wasp WPS100 Product Reference Guide Send Graphic User Interf ace Characters (Continued) Send GUI 5 Send GUI 4 Send GUI 3.
9-165 Advanced Data Formatting Send Graphic User Interf ace Characters (Continued) Send GUI 8 Send GUI 7 Send GUI 6.
9-166 Wasp WPS100 Product Reference Guide Send Graphic User Interf ace Characters (Continued) Send GUI B Send GUI A Send GUI 9.
9-167 Advanced Data Formatting Send Graphic User Interf ace Characters (Continued) Send GUI E Send GUI D Send GUI C.
9-168 Wasp WPS100 Product Reference Guide Send Graphic User Interf ace Characters (Continued) Send GUI H Send GUI G Send GUI F.
9-169 Advanced Data Formatting Send Graphic User Interf ace Characters (Continued) Send GUI K Send GUI J Send GUI I.
9-170 Wasp WPS100 Product Reference Guide Send Graphic User Interf ace Characters (Continued) Send GUI N Send GUI M Send GUI L.
9-171 Advanced Data Formatting Send Graphic User Interf ace Characters (Continued) Send GUI Q Send GUI P Send GUI O.
9-172 Wasp WPS100 Product Reference Guide Send Graphic User Interf ace Characters (Continued) Send GUI T Send GUI S Send GUI R.
9-173 Advanced Data Formatting Send Graphic User Interf ace Characters (Continued) Send GUI W Send GUI V Send GUI U.
9-174 Wasp WPS100 Product Reference Guide Send Graphic User Interf ace Characters (Continued) Send GUI Z Send GUI Y Send GUI X.
9-175 Advanced Data Formatting T urn On/Off Rule Sets Use these bar codes to turn rule se ts on and off. T urn On Ru le Set 1 T urn On Rule Set 2.
9-176 Wasp WPS100 Product Reference Guide T urn On/Off Rule Sets (Continued) T urn On Rul e Set 4 T urn On Ru le Set 3 T u rn Off Rule Set 1.
9-177 Advanced Data Formatting T urn On/Off Rule Sets (Continued) T urn Off Rule Set 2 T urn Off Rule Set 4 T urn Off Rule Set 3.
9-178 Wasp WPS100 Product Reference Guide Alphanumeric Keyboard Sp ace # $.
9-179 Advanced Data Formatting Alphanumeric Keyboard (Continued) % * +.
9-180 Wasp WPS100 Product Reference Guide Alphanumeric Keyboard (Continued) . - /.
9-181 Advanced Data Formatting Alphanumeric Keyboard (Continued) “ & !.
9-182 Wasp WPS100 Product Reference Guide Alphanumeric Keyboard (Continued) ( ‘ ).
9-183 Advanced Data Formatting Alphanumeric Keyboard (Continued) : < ;.
9-184 Wasp WPS100 Product Reference Guide Alphanumeric Keyboard (Continued) ? = >.
9-185 Advanced Data Formatting Alphanumeric Keyboard (Continued) @ [.
9-186 Wasp WPS100 Product Reference Guide Alphanumeric Keyboard (Continued) ] ^ _.
9-187 Advanced Data Formatting Alphanumeric Keyboard (Continued) Bar codes on this p age should not be confused with those on the numeric keypad. 0 1 `.
9-188 Wasp WPS100 Product Reference Guide Alphanumeric Keyboard (Continued) Bar codes on this p age should not be confused with those on the numeric keyp ad.
9-189 Advanced Data Formatting Alphanumeric Keyboard (Continued) Bar codes on this p age should not be confused with those on the numeric keypad. 7 6 5.
9-190 Wasp WPS100 Product Reference Guide Alphanumeric Keyboard (Continued) Bar codes on this p age should not be confused with those on the numeric keyp ad.
9-191 Advanced Data Formatting Alphanumeric Keyboard (Continued) B D C.
9-192 Wasp WPS100 Product Reference Guide Alphanumeric Keyboard (Continued) E F G.
9-193 Advanced Data Formatting Alphanumeric Keyboard (Continued) H J I.
9-194 Wasp WPS100 Product Reference Guide Alphanumeric Keyboard (Continued) K L M.
9-195 Advanced Data Formatting Alphanumeric Keyboard (Continued) N O P.
9-196 Wasp WPS100 Product Reference Guide Alphanumeric Keyboard (Continued) R Q S.
9-197 Advanced Data Formatting Alphanumeric Keyboard (Continued) U V T.
9-198 Wasp WPS100 Product Reference Guide Alphanumeric Keyboard (Continued) X W Y.
9-199 Advanced Data Formatting Alphanumeric Keyboard (Continued) Z End Of Message Cancel.
9-200 Wasp WPS100 Product Reference Guide Alphanumeric Keyboard (Continued) a b c.
9-201 Advanced Data Formatting Alphanumeric Keyboard (Continued) d e f.
9-202 Wasp WPS100 Product Reference Guide Alphanumeric Keyboard (Continued) h g i.
9-203 Advanced Data Formatting Alphanumeric Keyboard (Continued) k l j.
9-204 Wasp WPS100 Product Reference Guide Alphanumeric Keyboard (Continued) n m o.
9-205 Advanced Data Formatting Alphanumeric Keyboard (Continued) p r q.
9-206 Wasp WPS100 Product Reference Guide Alphanumeric Keyboard (Continued) u s t.
9-207 Advanced Data Formatting Alphanumeric Keyboard (Continued) v x w.
9-208 Wasp WPS100 Product Reference Guide Alphanumeric Keyboard (Continued) y z {.
9-209 Advanced Data Formatting Alphanumeric Keyboard (Continued) | ~ }.
9-210 Wasp WPS100 Product Reference Guide.
A-1 Appendix A S tandard Default Parameters T ab le A-1. St andard De fault Para meters T able Parameter Default Page Number User Preferences Set Default Parameter All Defaults 4-5 Beeper T one High 4-6 Beeper V olume High 4-7 V olume Chan ge T rigger Delay 5 sec 4-8 Laser On T ime 3.
A-2 Wasp WPS100 Product Reference Guide T ime-out Betwe en Same Symbol 0.6 sec 4-15 T ime-out Between Different Symbols 0.2 sec 4-15 T ime Delay to Low Power Mode 30 Minu tes 4-16 Linear UPC/EAN Decod.
A-3 Standard Default Parameters Check Receive Errors Enable 6-13 Hardware Handshaking None 6-14 Software Handshaking None 6-17 Host Serial Response Time-out 2 Sec 6-20 RTS Line S tate Low RTS 6-22 S t.
A-4 Wasp WPS100 Product Reference Guide USB Keyboard FN1 Substitution Disable 6-14 Function Key Mapping Disable 6-15 Simulated Caps Lock Disable 6-16 Convert Case Disable 6-17 UPC/EAN UPC-A Enable 7-8.
A-5 Standard Default Parameters Convert UPC-E to A Disable 7-21 Convert UPC-E1 to A Disable 7-22 EAN-8 Zero Extend Disable 7-23 UCC Coupon Extended Code Disable 7-24 Code 128 Code 128 Enable 7-25 UCC/.
A-6 Wasp WPS100 Product Reference Guide Buffer Code 39 Disable 7-39 Code 39 Decode Performance Ensable 7-43 Code 39 Decode Performance Level Level 3 7-44 Code 93 Code 93 Disable 7-45 Set Length(s) for.
A-7 Standard Default Parameters Discrete 2 of 5 Disable 7-59 Set Length(s) for D 2 of 5 12 7-60 Chinese 2 of 5 Enable/Disable C hinese 2 of 5 Disab le 7-62 Codabar (NW - 7) Codabar Disable 7-63 Set Le.
A-8 Wasp WPS100 Product Reference Guide Convert RSS to UPC/EAN Disable 7-77 Symbology - Specific Security Levels Redundancy Security Level s 1 7-80 Security Level 0 7-83 Symbology - Inte rcharacter Ga.
B-1 Appendix B Programming Reference Symbol Code Identifiers T able B-1. Code Characters Code Character Code T ype A UPC/EAN B Code 39, Code 39 F ull ASCII, Code 32 C Codabar D Code 128, ISBT 128 E Co.
B-2 Wasp WPS100 Product Reference Guide M Code 39 Trioptic N Coupon Code RR S S T able B-1. Code Characters (Continued) Code Character Code T ype.
B-3 Programming Reference AIM Code Identifiers Each AIM Code Identifier contai ns the thr ee-character string ]cm where: ]=Flag Character (ASCII 93) c=Code Charac ter m=Modifier Character T able B-2.
B-4 Wasp WPS100 Product Reference Guide The modifier character is the sum of the ap plicable option values based on Ta b l e B - 3 . T able B-3. Modifier Characters Code T ype Optio n V alue Option Code 39 0 No Check character . 1 Reader has checked one check character.
B-5 Programming Reference I 2 of 5 0 No check digit processing. 1 Reader has validated check digit. 3 Reader has validated and stripped check digit. Example: An I 2 of 5 bar code without check digit, .
B-6 Wasp WPS100 Product Reference Guide UPC/EAN 0 S tandard packet in full EAN coun try code format, which is 13 digits for UPCA and UPCE (not including suppl emental data). 1 T wo digit supplem ent data onl y . 2 Five digit supplement data only . 4 EAN-8 data pa cket.
B-7 Programming Reference RSS Family No option specified at this time . Always transmit 0. RSS-14 and RSS-Limited transmit with an Application Identifier “01”. Note: In UCC/EAN-128 emulation mode, RSS is transmitted using Code 128 rules (i.e., ]C1).
B-8 Wasp WPS100 Product Reference Guide.
C-1 0 1 2 3 4 5 6 7 8 9 0 5 Appendix C Sample Bar Codes Code 39 UPC/EAN UPC-A, 100 % 123ABC.
C-2 Wasp WPS100 Product Reference Guide UPC/EAN (Continued) EAN-13, 100 % Code 128 Interleaved 2 of 5 3 4 5 6 7 8 9 0 1 2 3 4 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 .
C-3 Sample Bar Codes RSS 14 Note: RSS 14 must be enabled to read the bar code below (see RSS 14 on page 7 -74). 7612341562341.
C-4 Wasp WPS100 Product Reference Guide.
D-1 Appendix D Numeric Bar Codes 0, 1 For par ameters requiring specific numeric value s, scan the appropriately numbered bar code(s). 0 1.
D-2 Wasp WPS100 Product Reference Guide 2, 3, 4 2 3 4.
D-3 Numeric Bar Codes 5, 6, 7 5 6 7.
D-4 Wasp WPS100 Product Reference Guide 8, 9 9 8.
D-5 Numeric Bar Codes Cancel If you make an error or wish to change your se lection, scan the ba r code below . Cancel.
D-6 Wasp WPS100 Product Reference Guide.
Glossary-1 Glossary Aperture The opening in an optical system defin ed by a lens or baffle that establishes the field of view . AIM The Automatic Identification Manufacturer s Inc., a trade association. ASCII American S tandard Code for Information Interch ange.
Glossary-2 Wasp WPS100 Product Reference Guide Byte On an addressable boundary , ei ght adjacent binary digits (0 and 1) combined in a pattern to represent a specific characte r or numeric value. Bits are numbered from the right, 0 through 7 , with bit 0 the low- order bit.
Glossary-3 Glossary Code Length Number of data characters in a bar cod e between the start and stop characters , not including th ose characters. Continuous Cod e A bar code or symbol in which all spaces within the symbol are parts of characters. There are n o intercha racter g aps in a continuous code.
Glossary-4 Wasp WPS100 Product Reference Guide IEC (825) Class 1 This is the lowest power IEC laser classification. Conformity is ensured through a software restriction of 120 seconds of laser operation within any 1000 second window and an automa tic laser shutdown if the scanner's oscillating mirror fails.
Glossary-5 Glossary Percent Decode T he average probability that a singl e scan of a bar code would result in a successful decode. In a well-desi gned bar code scanning system, that probability should approach ne ar 100%. Print Contrast Signal (PCS) Measurement of the co ntrast (brigh tness difference) between the bars and spaces of a symbol.
Glossary-6 Wasp WPS100 Product Reference Guide Start/ Sto p Character A pattern of bars and spaces that provides the scanner with start and stop reading instructions and scanni ng direction. The start and stop characters are normally to the left and right margins of a horizontal code.
Index-1 A actions . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-2 ADF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1 actions . . . . . . . . . . . . . 13-1, 13-33, 13-34 move cursor . . . . . . . . . 13-43, 13-44 send data .
Index-2 Wasp WPS100 Product Reference Guide zero removal . . . . . . . . . . . . . . . . . . 13-53 AIM code identifiers . . . . . . . . . . . . . . . . . . B-3 aiming . . . . . . . . . . . . . . . . . . . . . . . 2-10, 2-11 B bar codes beep after good decode .
Index-3 Index caps lock override . . . . . . . . . . . 7-11 country keyboard types . . . . . . . . 7-6 default table . . . . . . . . . . . . . . . . . 7-4 device type . . . . . . . . . . . . . . . . . . 7-5 keystroke delay . . . . . . . . . . . . . 7-10 unknown characters .
Index-4 Wasp WPS100 Product Reference Guide P paramet ers keyboard wedge . . . . . . . . . . . . . . . . . 5-4 USB . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 pinouts scanner signal descriptions .
.
Revision A Wasp T echnologies, Inc. 1400 10th S treet Plano, TX 75074 http://support.wa spba rcode.com WASP WPS100 Product Reference Guide.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Wasp Bar Code WPS100 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Wasp Bar Code WPS100 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Wasp Bar Code WPS100 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Wasp Bar Code WPS100 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Wasp Bar Code WPS100, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Wasp Bar Code WPS100.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Wasp Bar Code WPS100. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Wasp Bar Code WPS100 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
