Manuale d’uso / di manutenzione del prodotto 240 del fabbricante Volvo
Vai alla pagina of 126
1987 Volvo 240 1 9 8 7 VOLVO 240 Important It is most important that you read the first two chapters in order to become familiar with your vehicle's instruments and features. The other chapters are intended to provide you with information, and also serve as a source of reference.
1987 Volvo 240 driving in your Volvo, an automobile designed with your safety and comfort in mind. To ensure your satisfaction with this vehicle, we encourage you to familiarize yourself with the equipment descriptions, operating instructions, and maintenance requirements/recommendations in this manual.
1987 Volvo 240 pg. 5 Keys file:///K|/ownersdocs/1987/1987_240/87240_00.htm (3 of 4)12/30/2006 7:53:23 AM.
1987 Volvo 240 The key number codes are stamped on a separate tag supplied with the keys. This tag should be separated from the key ring and kept in a safe place. The double-sided tape on the back of the tag can be used to secure it safely. In the event the original keys are lost, duplicates may be ordered from your Volvo dealer.
1987 Volvo 240 1 9 8 7 VOLVO 240 Before you drive pg. 6 240 DL Sedan pg. 7 Before you drive Instruments and controls 8 Instruments 10 Warning lights 11 Clock, ambient temperature gauge 12 Oil pressure gauge, voltmeter 13 Ignition switch, turn signals 14 Lighting 15 Windshield wipers, washer nozzles 16 file:///K|/ownersdocs/1987/1987_240/87240_01a.
1987 Volvo 240 Washer fluid reservoir 17 Rear window demister, heated seat, hazard warning flasher 18 Parking brake 19 Cigarette lighter, ash trays 20 Electrically operated windows 21 Heating and vent.
1987 Volvo 240 pg. 9 Instruments and controls See page 1 Air louver 23 2 Turn signals 14 3 Headlights, parking lights 15 4 Instruments, lights 15 5 Instruments 10 6 Wiper/washer, tailgate window wiper.
1987 Volvo 240 16 Cigarette lighter 20 17 Rear window demister 18 18 Hazard warning flashers 18 19 Air conditioning(some models) 24 20 Seat belt reminder light 28 21 Heating and ventilation 22 22 Gear.
1987 Volvo 240 E Temperature gauge The gauge pointer should remain Inside the black range during normal operation. If the pointer enters the red range repeatedly, check coolant level and fan belt tension (See sections titled "Cooling system and coolant") WARNING! allow engine to cool before adding fluid.
1987 Volvo 240 O Overdrive OFF indicator light (yellow) (automatic transmission models) Shift indicator light (yellow) (manual transmission models) pg.
1987 Volvo 240 N Brake failure warning light (red) If the light comes on while driving and the brake pedal can be depressed further than normal, it is an indication that one of the brake circuits is not functioning. Stop immediately, open engine hood and check brake fluid level (see section "Brake fluid, power steering").
1987 Volvo 240 Ambient temp. gauge (accessory) An electronic thermometer that indicates ambient temperature just above the road surface. Warns you of icy road conditions. pg. 13 Oil pressure gauge, voltmeter Oil pressure gauge (accessory) The oil pressure gauge indicates the pressure of the oil in the lubricating system of the engine.
1987 Volvo 240 Voltmeter (accessory) The voltmeter indicates the voltage in the electrical system and thereby also the state of the battery. While the car is being driven the pointer should be within the black field. Should the pointer point to the upper or lower red field when driving, this may indicate some fault in the electrical system.
1987 Volvo 240 free the ignition key. A chime will sound if the starting key is in the ignition lock and the front door on the driver's side is open. The chime will also sound if the headlights or parking lights are on when the door is open. The chime goes off when the front door is closed.
1987 Volvo 240 Move the lever towards the steering wheel. The headlight high beam will be on until the lever is released. pg. 15 Lighting Headlights and position lights All lights off Parking lights o.
1987 Volvo 240 off when the driver's door is closed. If the headlight is in position , all lights will go out when starting (ignition) switch is switched off. Instrument panel lamps rheostat Clockwise - brighter Counterclockwise - dimmer. pg. 16 Windshield wipers, Tailgate window wiper, Washer nozzles Wiper/washer 1 Intermittent wiper.
1987 Volvo 240 3 Wipers, low speed. 4 Wipers, high speed. 5 Windshield wiper/washer. The wiper will make 2-3 complete stroking cycles after the lever is released. Tailgate window wiper/washer, wagon Operated by the switch at the end of the windshield wiper/washer operating lever.
1987 Volvo 240 Adjusting washer nozzles The fluid spray may be adjusted by carefully inserting a needle into the metal nozzle and rotating nozzle to desired position.
1987 Volvo 240 Rear fog lights The rear fog lights are considerably brighter than the normal tail lights and should be used only when atmospheric conditions, such as fog, rain, snow, smoke or dust reduce the daytime or night time visibility of other vehicles to less than 500 ft.
1987 Volvo 240 Hazard warning flasher The four-way flasher should be used to indicate that the vehicle has become a traffic hazard. Note: Regulations regarding the use of the hazard warning flasher may vary from state to state. pg. 19 Parking brake Parking brake (hand brake) The lever is situated between the front seats.
1987 Volvo 240 the heating which then is thermostatically controlled. It switches on automatically when the temperature drops below 60°F (15°C) and switches off at approx. 95°F (35°C). pg. 20 Cigarette lighter, Ash trays Cigarette lighter To operate, depress the knob fully.
1987 Volvo 240 Electrically operated windows (standard on certain models) The electrically-operated windows are controlled by switches set in the door arm rests. All the windows can be controlled from the driver's are rest as shown in the above illustration.
1987 Volvo 240 The rear door windows can be raised or lowered with the respective door switch on the driver's door. The rear door windows cannot be raised or lowered with the respective door switch but instead only with the corresponding switch on the driver's door.
1987 Volvo 240 pg. 23 Heating and ventilation How to . . . . . . obtain max. heat 1 TEMP >>> WARM 2 depressed 5 FAN >>> 3(or4) 6 All dash louvers halfway open and floor air louver closed.
1987 Volvo 240 Always keep front external inlet grille (in front of the windshield) clear of obstructions (snow, ice, etc.). Maximum defroster action For maximum defroster capacity at very low ambient temperatures, use the recirculation control (button depressed).
1987 Volvo 240 Lever placed forward = louver opens Lever placed rearward = louver closes Maximum airflow is obtained with louver fully open and the fan (blower motor) shut completely off. (The fan forces the air through the dash louvers.) Contents | Top of Page file:///K|/ownersdocs/1987/1987_240/87240_01a.
1987 Volvo 240 pg. 24 Air conditioning Air conditioning (standard on certain models) How to use the air conditioner: 1 Fan Position 4 for rapid cooling. 2 AIR COND Start the air conditioning compressor by turning the control knob clockwise toward MAX.
1987 Volvo 240 vehicle. Have your Volvo dealer check the system for correct operation yearly. The air conditioning system should be operated periodically to ensure trouble-free performance year round.
1987 Volvo 240 pg. 26 Front seats Driver seat height There are two levers, each with three positions, for adjusting the height of the seat (front and/or back of cushion). This allows adjustment of the seat cushion angle for added comfort. After adjusting the seat check that it is securely latched.
1987 Volvo 240 Electrically heated front seats The front seats are electrically heated and thermostatically controlled. The heater switches on automatically when the temperature drops below 60°F (15°C) and switches off at approx. 95°F (35°C). The heating may also be disengaged manually using the switches on the parking brake console.
1987 Volvo 240 The front passenger seat is retained by four brackets, each with three positions. The positions are the same as for the driver's seat. However, this adjustment must be accomplished manually, using appropriate hand tools. Child safety Volvo recommends the proper use of restraint systems for all occupants, including children.
1987 Volvo 240 Seat belts, retractable Always fasten the seat belts before you drive or ride. Two lights will be illuminated for 4-8 seconds after the starting (ignition) key is turned to driving position. One light is located in the instrument cluster and one in the console between the front seats.
1987 Volvo 240 The seat belt retractors are normally "unlocked" The retractors will lock up as follows: ● if belt is pulled out rapidly ● during braking and acceleration ● if the vehicle is leaning excessively ● when driving in turns Check seat belt mechanism function as follows: 1.
1987 Volvo 240 To lengthen, angle the buckle as shown in the upper illustration and pull the belt through. To shorten, pull the upper part of the double webbing until snug. During pregnancy Pregnant women should always wear seat belts. Remember that the belt should always be positioned in such a way as to avoid any possible pressure on the abdomen.
1987 Volvo 240 pg. 30 Doors and locks, Child safety lock Unlocking front doors Both front doors can be unlocked by using the starting (ignition) key. Turning the key 1/4 turn counter- clockwise (right door: clockwise) lifts the lock buttons on the window ledge and the door can be opened by pulling the handle.
1987 Volvo 240 Child safety locks The buttons are located on the rear door jambs. A The lock functions normally. B The door cannot be opened from the inside . Remember, in the event of an accident, the rear seat passengers cannot open the doors from the inside with the buttons in position B.
1987 Volvo 240 You can also operate the trunk lock directly with the owner's key even if the vehicle is centrally locked. The trunk lock can also be disconnected from the central locking system by turning the key counterclockwise as shown above: The trunk is now always locked.
1987 Volvo 240 pg. 32 Hood, Long load storage To open the hood Pull the release handle (located under the left side of the dash). Lift the hood slightly, insert a hand under the center line of the hood and depress the safety catch handle. Open the hood.
1987 Volvo 240 An optional, specially designed, storage bag should also be used to avoid soiling or tearing the upholstery. Please note that the flap in the rear seat is intended only for light loads such as skis, wood etc. Max. length of load 6 1/2 ft = 2 m.
1987 Volvo 240 Side-view mirrors A Adjustment up/down B Adjustment sideways Avoid using ice scrapers made of metal as they can easily scratch the mirror surface. WARNING! The mirrors should always be adjusted before driving. pg. 34 Interior light, Sunroof, Refueling Interior light 1 Light always on.
1987 Volvo 240 The wagon model has a slightly different kind of interior lamp housing. On certain models a time delay device illuminates the interior light for approx. 15 seconds after closing the driver's door. This facilitates finding starting (ignition) switch, etc.
1987 Volvo 240 Folding rear seat Depress either lever located at the front bottom edge of the rear seat cushion (right or left side). Tilt the seat towards the front seat. Note: It may be necessary to move front seat forward or raise the seat backs slightly to allow rear seat to fold down.
1987 Volvo 240 Removing seat cushion The seat cushion can be easily removed to provide a slightly larger cargo storage area. To remove, lift the seat cushion out of the hinges. pg. 36 Tailgate (wagon) To open from the outside Depress the release button located under the tailgate handle.
1987 Volvo 240 To open from the inside Pull out the T-handle located at the bottom of the tailgate. Safety catch A The lid cannot be opened from the inside. B The lock functions normally. pg. 37 Cargo compartment (wagon) file:///K|/ownersdocs/1987/1987_240/87240_01b.
1987 Volvo 240 Spare wheel, jack The spare wheel and jack are stored under the hatch to the left in the cargo compartment. Loosen the two clips 1/4 turn and lift off the hatch. CAUTION! Unless the station wagon is equipped with a cargo compartment seat (Volvo accessory), occupants should not ride in this section of the car.
1987 Volvo 240 Eyelets Six eyelets are provided in the cargo compartment for anchoring cargo. Four eyelets are shown in the illustration. The remaining two are accessible when the seat back is folded forward. Note: The eyelets are not to be used as occupant restraints.
1987 Volvo 240 file:///K|/ownersdocs/1987/1987_240/87240_01b.htm (21 of 21)12/30/2006 7:53:26 AM.
1987 Volvo 240 1 9 8 7 VOLVO 240 Operating the car pg. 39 Operating the car Service inspection 40 Break-in period 40 Driving economy, shift indicator light 41 Starting the engine 42 Manual transmissio.
1987 Volvo 240 First 600 miles (1,000 km) 1st gear 20 mph (30 km/h) 2nd gear 30 mph (50 km/h) 3rd gear 50 mph (80 km/h) 4th gear 70 mph (110 km/h) 5th gear 80 mph (130 km/h) 600-1,200 miles (1,000-2,0.
1987 Volvo 240 pg. 41 Driving economy, Shift indicator light Economical driving does not necessarily mean driving slow Better driving economy may be obtained by thinking ahead, avoiding rapid starts and stops and adjusting the speed of your vehicle to immediate traffic conditions.
1987 Volvo 240 when climbing hills or trailer towing). Using the light regularly, however, should result in a mileage improvement of six percent or more, depending on how you normally drive.
1987 Volvo 240 WARNING! Always open the garage doors fully before starting the engine inside the garage to ensure adequate ventilation. The exhaust gases contain carbon monoxide, which is invisible and odorless but very poisonous. pg. 43 Manual transmission 5-speed manual transmission Depress the clutch pedal fully when changing gears.
1987 Volvo 240 Shift positions P park R reverse N neutral D drive 2 intermediate 1 low The gear selector can be moved freely between D and 2. Selections of other positions are obtained by depressing the selector knob prior to moving the selector. Depressing the selector knob slightly allows selection of positions N and 1 .
1987 Volvo 240 Position 2 may be used to obtain forced downshift to 2nd gear for increased engine braking effect. Position 2 can also be used... ● for relatively slow highway driving. ● for city driving. ● when driving on mountain roads where precise speed control is desirable.
1987 Volvo 240 disengaged, the indicator light ( ) in the instrument panel is illuminated. Be aware that, if 4th gear is disengaged (reminder light illuminated) when the engine is switched off, the transmission will revert automatically to 4-speed operation (reminder light not illuminated) when the engine is restarted.
1987 Volvo 240 Precautionary steps to observe when towing Please check with state and local authorities before attempting this type of towing as vehicles being towed are subject to regulations regarding maximum towing speed, length and type of towing device, lighting, etc.
1987 Volvo 240 pg. 48 Trailer hauling When preparing for trailer hauling, observe the following: ● Use a trailer hitch which meets Federal Safety Standards for rear end collisions (FMVSS 301-75). For trailer weights exceeding 2,000 lbs (908 kgs) use only a trailer hitch offered as a Genuine Volvo Accessory.
1987 Volvo 240 WARNING! Bumper-attached trailer hitches must not be used on Volvos, nor should safety chains be attached to the bumper. Trailer hitches attaching to the vehicle rear axle must not be used.
1987 Volvo 240 Handling, roadholding Vehicle load, tire design and inflation pressure are important for proper handling. Therefore check that the tires are inflated to the recommended pressure according to the vehicle load. It is recommended to use tires of the same make and dimensions on all four wheels.
1987 Volvo 240 discs and pads. This will cause a delay in braking effect when the pedal is depressed. To avoid such a delay, when the brakes are needed, depress the pedal occasionally when driving in rain or slush. This will remove the water from the brakes.
1987 Volvo 240 ● Keep your engine properly tuned. Certain engine malfunctions, particularly involving the electrical, fuel or ignition systems, may cause unusually high converter temperatures.
1987 Volvo 240 1 9 8 7 VOLVO 240 Service and maintenance pg. 51 Service and maintenance Maintenance services 53 Service requirements 54 Engine B230F 56 Fuel requirements 58 Engine fluids 59 Engine oil.
1987 Volvo 240 pg. 52 240 DL Wagon pg. 53 Maintenance service MAINTENANCE Maintenance services Your Volvo has passed two major inspections before it was delivered to you, according to Volvo specifications. When driven 600-1,200 miles (1,000-2,000 km), your car should be brought to the Volvo dealer for a maintenance service.
1987 Volvo 240 1987 MAINTENANCE SCHEDULE 240 A = Adjust (Correct if necessary) R = Replace I = Inspect (Correct or Replace if necessary) L = Lubricate Maintenance Operation Miles 600- 1,200 5,000 10,0.
1987 Volvo 240 Maintenance Operation Miles 600- 1,200 5,000 10,000 15,000 20,000 25,000 30,000 35,000 40,000 45,000 50,000 55,000 60,000 (Km) (1,000- 2,000) (8,000) (16,000) (24,000) (32,000) (40,000).
1987 Volvo 240 Engine B230F 1 Data plate 2 Oil filler cap, engine 3 Oil dipstick, engine 4 Brake fluid reservoir 5 Washer fluid reservoir 6 Expansion tank, coolant 7 Oil reservoir, power steering 8 Battery 9 Fuse engine control pg. 57 Road assistance Your 1987 Volvo comes with a three year road assistance program known as ON-CALL.
1987 Volvo 240 used, must contain no more than 10 percent ethanol and must have an (R+M)/2 rating of 87 or higher. If you experience problems with starting, driveability, or fuel economy with gasohol, you should discontinue its use.
1987 Volvo 240 Washer fluid Washer fluid reservoir. Water and solvent (wintertime use windshield washer anti-freeze). See "Washer fluid reservoir" section.
1987 Volvo 240 pg. 61 Cooling system Changing coolant Every two years or 30,000 miles (50,000 km) the cooling system should be drained, flushed and refilled. Remove the expansion tank cap. Open the drain cock on right side of the engine block and disconnect the lower radiator hose.
1987 Volvo 240 Engine Mechanical Components Torque manifold nuts The manifold nuts should be torqued at the 600-1,200 mile (1,000-2,000 km) inspection. A loose manifold could alter air/fuel ratio and cause an increase in emission and/or poor driveability.
1987 Volvo 240 Air cleaner Replace the air cleaner cartridge every 30,000 miles (48,000 km). The cartridge should be replaced more often when driving under dirty and/or dusty conditions. The filter cannot be cleaned and should always be replaced with a new one.
1987 Volvo 240 B230F 1. PCV nipple 2. Flame Guard 3. Oil trap PCV system, B230F engine The PCV nipple in the intake manifold should be cleaned after 60,000 miles (100,000 km). It is recommended that the flame guard be cleaned every 20,000 miles (32,000 km) pg.
1987 Volvo 240 WARNING! The ignition system operates at very high voltages. Special safety precautions must be followed to prevent injury: Always turn the ignition off when: ● connecting engine test and diagnostic equipment to the vehicle (timing light, tach-dwell tester, ignition oscilloscope, etc.
1987 Volvo 240 1 9 8 7 VOLVO 240 pg. 68 Manual transmission Manual transmission with overdrive, M47 II Capacity: 1.4 US qts = 1.3 liters. Fluid type: Automatic Transmission Fluid Type F or G(FLM) Replace: at 600-1,200 mile (1,000-2,000 km) service only.
1987 Volvo 240 Automatic transmission Capacity: 7.8 US qts (7.4 liters) Fluid type: Automatic Transmission Fluid type Dexron II D. Replace: every 20,000 miles (32,000 km). A Cold transmission: oil temperature = +105° F (+40° C). This is a normal temperature for the transmission after idling for about 10 minutes.
1987 Volvo 240 Rear axle oil Capacity: 1.7 US qts - 1.6 liters Oil type: API GL-5 (MIL-L-2105 B or C) Viscosity: SAE 90 or 80W/90 Replace: at 600-1,200 mile (1,000-2,000 km) service only. The oil level should be up to the filler plug (A). Drain rear axle oil through drain plug (B).
1987 Volvo 240 Brake fluid Fluid type: DOT 4 Replace: every 2 years or 30,000 miles (48,000 km). Check, without removing the cap, that the level is above the "MIN" mark of the fluid reservoir. Always entrust brake fluid changing to a Volvo dealer.
1987 Volvo 240 Lubricate body To avoid rattles and unnecessary wear, the body should be lubricated once a year. Hinges on hood, doors and trunk lid as well as door stops should be lubricated every 10,000 miles (16,000 km).
1987 Volvo 240 Check coolant level The cooling system must be filled with coolant and not leak to operate at maximum efficiency. Check the coolant level whenever you refuel. The level should be between the "Max" and "Min" marks on the expansion tank.
1987 Volvo 240 - stopping the engine suddenly after high speed driving, so-called after-boiling. To avoid overheating, the following rules should be followed. ● Reduce speed and downshift when towing a trailer up long steep inclines. The risk of overheating can be reduced by switching off the air conditioning system for a short while.
1987 Volvo 240 Jump starting CAUTION: Improper hook-up of jumper cables or the use of other than 12 volt batteries could result in damage to equipment and/or battery. Check that cars are not touching to prevent premature completion of negative circuit.
1987 Volvo 240 Replacing bulbs The replacement of bulbs in the various lighting units is shown on the following pages. Make sure when installing bulbs, that the guide pin on the socket fits into its corresponding recess. When installing bulbs, do not touch the glass with your fingers.
1987 Volvo 240 Tail lamp bulbs, sedan model All tail lamp bulbs are replaced from inside of trunk. 1 Unscrew and remove tail lamp inside cover. Note that inside cover is hooked at the upper edge. Lift the lower end out/up and unhook upper edge. 2 Turn bulb holder approx.
1987 Volvo 240 Front light bulbs Loosen the Phillips screws and remove the lens. The bulbs can now be removed by pressing them inwards and turning them slightly counterclockwise.
1987 Volvo 240 Changing bulb, right hand side: ● Remove the right hand stowage cover. ● Loosen the clip and move panel aside (see illustration). The procedure for changing a bulb is basically the same as for other models. When re-installing, hold the bulb holder with the word "Volvo" turned towards the center of the car.
1987 Volvo 240 License plate light, sedan model Slide the bulb housing backwards until it is released from the front edge. Pull out the lamp housing and replace the bulb.
1987 Volvo 240 High-mounted brake light Remove the plastic housing by pulling it up and away from the light assemble. Depress the black catch tab to release the bulb holder 1 . Swing the bulb holder out and replace the bulb 2 Bulbs Power Socket High-mounted Brake light 20 W Ba9s pg.
1987 Volvo 240 Engine compartment light, Trunk light Remove screw holding the light assembly. Lift it out to remove. Replace the bulb. Reinstall by first inserting the guides into one side, then press in the light assembly and install the screw. Bulbs Power Socket Engine compartment light 15W S 8.
1987 Volvo 240 The fuse box is positioned in front of the left front door pillar. When replacing fuses, check that the correct amperage is used. Never use fuses of higher amperage, unless specified by your Volvo dealer. If one fuse repeatedly fails, take the car to your Volvo dealer for fault-tracing.
1987 Volvo 240 pg. 80 Wheels and tires Checking and correcting tire pressure Check the tire pressure when refueling. The tire pressure should only be corrected when the tires are cold. With warm tires, correct only when the pressure is too tow. The tire temperature (and, thus, pressure) rises after driving just a few miles.
1987 Volvo 240 ● Tire wear increases with speed. ● Do not change wheel location unless necessary. ● Correct front wheel alignment is very important. ● Unbalanced wheels impair tire economy and driving comfort. ● Hitting curbs can damage the tires and/or wheels permanently.
1987 Volvo 240 pg. 82 Wheel changing Changing a wheel Spare wheel, jack and tool kit are stowed in the trunk compartment. On the wagon models the jack and crank should be secured according to the above illustration to avoid any disturbing rattles. Make sure that the spare wheel is secured.
1987 Volvo 240 stud to ensure that a removed wheel can be reinstalled in its original position. Removal To remove the wheel cap the center emblem must first be pried-off using the screwdriver provided in the tool kit. The wheel cap may then be removed by hand.
1987 Volvo 240 should be secured according to the above illustration to avoid any disturbing rattle. Make sure that the spare wheel is secured. Before using the jack make sure the car is standing on firm, level ground. Apply the parking brake and place the transmission in either first or reverse gear.
1987 Volvo 240 pg. 84 Replacing wiper blades, Washing Washing The car should be washed at regular intervals since dirt, dust, insects and tar spots adhere to the paint and may cause damage.
1987 Volvo 240 Contents | Top of Page file:///K|/ownersdocs/1987/1987_240/87240_03b.htm (23 of 23)12/30/2006 7:53:31 AM.
1987 Volvo 240 1 9 8 7 VOLVO 240 pg. 85 Washing, Cleaning, Anti-rust treatment Machine washing Hand washing of a car is superior to machine washing. We recommend that you do not wash your car in an automatic wash during the first six months(because the paint will not have hardened sufficiently).
1987 Volvo 240 For more difficult spots, consult an expert for the choice of cleaning agent. On no account must gasoline, naphtha or similar cleaning agents be used on the plastic or the leather since these can cause damage. When aging, leather changes appearance, but the typical texture remains.
1987 Volvo 240 Minor stone chips and scratches Material: Rust remover Primer-brush-on type Surface finish - brush-on type Penknife or similar Brush Note: When touching-up the car, it should be clean and dry. The surface temperature should be above 60°F(+15°C).
1987 Volvo 240 When the primer surface is dry, the paint can be applied using a brush. Mix the paint thoroughly, apply several thin paint coats and let dry after each application. pg. 87 Paint touch-up 3 if there is a longer scratch, you may want to mask to protect surrounding paint.
1987 Volvo 240 2 Sand the damaged surface and wash it clean with thinner. Apply the rust remover. (Avoid contact with skin!) Wait a few minutes and then rinse carefully with water and wipe dry. 3 Shake the spray can for at least 1 minute. Spray on the primer.
1987 Volvo 240 Where parts of the car are covered with road dirt containing road salt, corrosion will be accelerated at a lower relative humidity than if the surface were clean. 3. Increased temperature will cause an accelerated rate of corrosion of those parts of the car which are not well ventilated to permit quick drying.
1987 Volvo 240 Engine lubricating system During the winter, multigrade oil 10W-30 should be used in the engine. At very low temperatures, below 0° F (-20° C), multigrade oil SAE 5W-30 is recommended. These oils reach the lubricating points in the engine more easily at low temperature and also facilitate cold starting.
1987 Volvo 240 Loose or corroded battery cable terminals. Check battery terminals and clamps. Clean or replace if necessary. Check that the starter cable is secure at its terminals. The ground strap, which connects the battery negative (-) terminal to the engine, should also be checked for corrosion or looseness.
1987 Volvo 240 Condition: Erratic idle (misfiring) Possible cause Correction intake system leaking. Check hose connections. Spark plugs, high tension leads or distributor cap worn (detective) Clean distributor cap and leads, check the cap for cracks. Replace defective or worn parts.
1987 Volvo 240 pg. 94 Label information The Vehicle Identification Number should always be quoted in all correspondence concerning your vehicle with the dealer and when ordering parts. 1 Vehicle Identification Number (VIN) VIN plate is located on top left surface of dash.
1987 Volvo 240 Contents | Top of Page file:///K|/ownersdocs/1987/1987_240/87240_03c.htm (11 of 11)12/30/2006 7:53:32 AM.
1987 Volvo 240 1 9 8 7 VOLVO 240 Specifications pg. 95 Specifications Dimensions and weights 96 Cargo space 96 Engine 97 Cooling system 98 Fuel system 98 Ignition system 98 Power transmission 99 Front end 99 Capacities 100 Electrical system 100 pg. 96 Specifications Dimensions and weights Sedan Models Wagon models Length 189.
1987 Volvo 240 Ground clearance (full load) 4.7" (12 cm) 4.7" (12 cm) Track, front 56.3" (143 cm) 56.3" (143 cm) Track, rear 53.5" (136 cm) 53.
1987 Volvo 240 WARNING! When adding accessories, equipment, luggage and other cargo to your vehicle, the total loaded weight capacity of the vehicle must not be exceeded. Consult your dealer for information. pg. 97 Specifications Engine B230F (2.3 liters; 141 cu.
1987 Volvo 240 Type Positive pressure, closed system Thermostat begins to open at 188.6°F(87°C) - fully open at 215°F(97°C) Fan belts, designation HC-38 X 918 (two) Coolant: Volvo Coolant type C (blue-green) Fuel system The engine is equipped with the LH-Jetronic electronic 2.
1987 Volvo 240 1st gear 2.45:1 2nd gear 1.45:1 3rd gear 1:1 Overdrive 0.69:1 Reverse 2.22.1 Rear axle reduction ratio: 3.73:1 Vehicle speed/1000 engine rpm (manual transmission) Rear axle ratio 3.31:1 mph km/ h 1 st gear 5.3 8.5 2nd gear 9.8 15.8 3rd gear 15.
1987 Volvo 240 -expansion tank separately 0.7 US qts 0.6 liters Engine: -oil and filter change 4.0 US qts 3.85 liters -oil changed separately 3.5 US qts 3.35 liters Transmission: -manual, M47 II 1.4 US qts 1.3 liters -automatic, AW70 7.8 US qts 7.4 liters Rear axle 1.
1987 Volvo 240 Turn Signals, rear 1073 21 W/32 cp Ba 15s 2 Brake light/tail light 1157 21 W/31 cp BaY 15d 2 5 W/3 cp High-mounted brake light Volvo P/N 968113 20 W Ba 9s 1 Back-up Lights 1073 21 W/32 cp Ba 15s 2 Rear fog lights 1073 21 W/32 cp Ba 15s 2 The following bulbs may be obtained from your nearest Volvo dealer.
1987 Volvo 240 Bulb Failure 1.2 W W2x4.6d 1 pg. 101 Specifications Recommended max. and min. speeds**, mph (km/h) Manual transmission M47 II 1st gear 2nd gear 3rd gear 4th gear 5th gear -25(- 40) 10-44(20-70) 20-70(30-110) 25- (44-) 44-(70-) **Always observe posted speed limits.
1987 Volvo 240 Model Vehicle capacity weight Recommended tire pressure (for fuel economy) Optimal Tire Pressure 1-3 occupants Special Spare Special Spare tire pressure front rear Tire Size front rear .
1987 Volvo 240 Volvo supports Voluntary Mechanic Certification by the N.I.A.S.E. Certified mechanics have demonstrated a high degree of competence in specific areas. Besides passing exams each mechanic must also have worked in the field for two or more years before a certificate is issued.
1987 Volvo 240 file:///K|/ownersdocs/1987/1987_240/87240_04.htm (11 of 11)12/30/2006 7:53:34 AM.
1987 Volvo 240 1 9 8 7 VOLVO 240 Back Page pg. 104-105 Index A Air Conditioning 24 Air louvers 23 Alternator, important note 73 Anti-freeze 72 Anti-rust treatment 85 Ash trays 20 Automatic transmissio.
1987 Volvo 240 Checking engine oil 59 Child safety 27 Child safety locks 30 Cigarette lighter 20 Climate control 22-24 Clock 12 Cold start 42 Cold weather driving 89 Control lights 10 Coolant 72 Coola.
1987 Volvo 240 Fault Tracing 90 Federal Clean Air Act 53 Front seats 26 Front wheel alignment 99 Fuel requirements 58 Fuel gauge 10 Fuel tank cap 34 Fuses 79 G Gas filler cap 34 Gasoline requirements .
1987 Volvo 240 L Label information 94 License plate lights 77 Lights 15 Locks 30 Long distance trips 89 Lubrication 71 Lumbar support 26 M Maintenance Service 53 Manual transmission driving with 43 Ma.
1987 Volvo 240 Road assisstance 57 Rustproofing 85 Rust protection 85 S Seat belts 28 Seats 26 Service diagnosis 90 Servicing 63 Shift indicator light 41 Shift positions 43 Shop manuals, Volvo 102 Sno.
1987 Volvo 240 Tranmission oil 68, 69 Trunk 31 Turn signals 14 Type designations 94 U Upholstery, cleaning 85 V Vehicle Identification Number 94 Ventilation outlets 18 VIN (Vehicle Identification Numb.
1987 Volvo 240 Fuel: Octane rating 91 RON Unleaded, 87 (R+M)/2 When refueling always check: A. Oil level between dipstick marks. The distance between the marks represents approx. 1 US qt. = 1 liter. Fill with multigrade oil B. Check without removing the cap that the brake fluid level is above the Min-mark.
1987 Volvo 240 WARNING! Carbon monoxide is a poisonous colorless and odorless gas which is present in all exhaust gases. If you ever smell exhaust fumes inside the vehicle, make sure the passenger compartment is ventilated and immediately return the vehicle to dealer for correction.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Volvo 240 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Volvo 240 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Volvo 240 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Volvo 240 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Volvo 240, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Volvo 240.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Volvo 240. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Volvo 240 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
