Manuale d’uso / di manutenzione del prodotto D855ST del fabbricante Vivitek
Vai alla pagina of 64
D8 Series User Manual ϡ͗͘Ί ⫼᠋ݠ Manual del usuario Manuel de l'utilisateur Benutzerhandbuch ㇠㟝㣄 ㉘⮹㉐ Ɋɭɤɨɜ ɨɞ ɫɬɜɨɩɨ ɥɶɡ ɨɜ ɚɬɟɥɹ Gebruikershandleiding ,QVWUXNFMDREVáXJL 8åLYDWHOVNiSĜtUXþND ǼȖȤİȚȡȓįȚȠȤȡȒıȘȢ .
Copyright This publication, including all photographs, illustratio ns and software, is protected under international copy- right laws, with all rights reserved. Neither this man ual, nor any of the material contained herein, may be reproduced without written consent of the autho r.
DLP Projector—User’s Manual — ii — Important Safety Information Important: It is strongly recommended that you read this sect ion carefully be fore using the projector. These safety and usage instructions will ensure that you enj oy many years of safe use of the pr ojector.
Preface Projector Installation Notice ¾ Place the projector in a horizontal p osition The tilt angle of the projector should not excee d 15 degrees, nor should the projector b e installed in any way other than the desktop and ceiling mou nt, ot herwise lamp life could decrease dramatically.
DLP Projector—User’s Manual Power Safety ¾ Only use the supplied power cord. ¾ Do not place anything on the powe r cord. Place the power cord where it will not be in the way of foot traffic. ¾ Remove the batteries from the remote control whe n storing or not in use for a prolonged period.
Preface – v – Main Features • Lightweight unit, easy to p ack away and transport. • Compatible with all m ajor video standards including NTSC, P AL, and SECAM. • A high brightness rating allows for pr esentations in daylight o r in lit rooms.
DLP Projector—User’s Manual — vi — Table of Contents GETTING STARTED .......................................................................................................................................................... 1 P ACKING C HECKLIST .
Preface – vii – HDMI TM Q & A……………………… ……….………………………… …………………………………………….48 SPECIFICATIONS ...........................................................................
DLP Projector – User’s Manual – 1 – G ETTING S TARTED Packing Checklist Carefully unpack the projector and che ck that the following items are included: DLP P ROJECTOR WITH L EN S C AP R EMOTE.
DLP Projector—User’s Manual Views of Projector Parts Front-right View 1 2 3 4 5 67 I TEM L ABEL D ESCRIPTIO N S EE PAGE : 6 1. IR receiver Receive IR sign al from rem ote control 2. Height-adj uster button Push to release height adjuste r 15 3. Height adjuster Adjusts level of projector 4.
DLP Projector – User’s Manual Top view—On-screen Display (OSD) buttons and LEDs M E N U S O U R C E A U T O LAMP TEMP POWER 1 2 3 4 5 6 7 8 9 10 11 12 S EE I TEM L ABEL D ESCRIPTIO N PAGE : 11 1. Turns the projector O n or Off (POWER) 10 2. SOURCE Detects the input device 3.
DLP Projector—User’s Manual – 4 – Rear view 1 2 3 4 56 7 8 9 10 1 1 12 13 14 15 16 17 I TEM L ABEL D ESCRIPTIO N S EE PAGE : 1. AC IN Connect the POWER CABLE 11 2. (USB) Connect the USB CABLE from a computer 3. 12V TRIGGER Conn ect the DC 12V OUT 4.
DLP Projector – User’s Manual Bottom view 1 1 43 2 I TEM L ABEL D ESCRIPTIO N S EE PAGE : 1. Ceiling support ho les Contact your dealer for in formation on mounting th e projector on a ceiling 15 2. Tilt adjustor Rotate adju ster lever to adjust angle po sition.
DLP Projector—User’s Manual Remote Control Par ts Important: 1. Avoid using the projector with bright fluoresc ent lighting turned on. Certain high-frequency fluo- rescent lights can disrupt remote control operation. 2. Be sure nothing obstructs the path between the re mote control and the proj ector.
DLP Projector – User’s Manual – 7 – I TEM L ABEL D ESCRIPTIO N S EE PAGE : 1. IR transmitter Transmit s signals t o projector 2. Status LED Lights when th e remote control is used 3. Laser Press to operate the on-screen pointer 4. Up Up arrow whe n connect ed through USB to a PC 5.
DLP Projector—User’s Manual – 8 – Remote Control Operating Range The remote control uses infrared transmission to cont rol the projector. It is not necessary to point the remote directly at the projector.
DLP Projector – User’s Manual S ETUP AND O PERATION Inserting the Remote Control Batteries – 9 – 1. Remove the battery compartment cover by sliding the cover in the direction of the arrow. 2. Insert the battery with the positive side facing up.
DLP Projector—User’s Manual – 10 – Connecting Input Devices A PC or note book computer and video devices can be conne cted to the projector a t the same time. Video devices include DVD , VCD, and VHS players, as we ll as movi e camcord ers and digital s till c ameras.
DLP Projector – User’s Manual – 11 – Starting and Shutting down t he Project or 1. Connect the power cord to the projector. Connect the other end to a wall outlet. The POWER LED on the projector light. 2. Turn on the connected devices. 3. Ensure the LAMP LED not a flashing orange.
DLP Projector—User’s Manual 5. When the “Power Off? /Press Power again” message appears, press the POWER button. The projector turns off. Caution: 1. Be sure to remove the lens cap before starting projector. 2. Do not unplug the power cord until the POWER LED stops flashing–indicating the projector has cooled down.
DLP Projector – User’s Manual Setting an Access Password (Security L ock) You can use the four (arrow) buttons to set a password and pr event un authorized use of the projector. When enabled, the password must be entered after you p ower on the projector.
DLP Projector—User’s Manual 5. You can use the cursor buttons ▲▼◄► either on keypad or IR remote control for password entry. You can use any combination including the same arrow five times, but not less than five. Press the cursor buttons in any order to set the password.
DLP Projector – User’s Manual Adjusting the Projector Level Take note of the following when setting up the projector: • The projector t able or stand should be level and sturdy . • Position the projector so that it is perpendicular t o the screen.
DLP Projector—User’s Manual Adjusting the Zoom, Focus and Keystone 1. B C A Use the Image-zoom control (on the projector only) to resize the pro- jected image and screen size B .(*) 2. Use the Image-focus control (on the projector only) to sharpen the pro- jected image – 16 – .
DLP Projector – User’s Manual Adjusting the Volume 1. V olume + - Press the Volume +/- buttons on the remote control. The volume control appears on the display. M E N U S O U R C E A U T O LAM P TEMP POWER 2. Press the Left or Right Cursor buttons on the keypad to adjust Volume +/- .
DLP Projector—User’s Manual O N -S CREEN D ISPLAY (OSD) M ENU S ETTINGS OSD Menu Controls The projector has an OSD that lets you ma ke image adjustments and c hange various settings. Navigating the OSD You can use the remote control curs or buttons or the buttons on the top of the projector to navigate and make changes to the OSD.
DLP Projector – User’s Manual Setting the OSD Language Set the OSD language to your pr eference before continuing. 1. Press the MENU button. Press the cursor ◄► button to navigate to Installation I. 2. Press the cursor ▲▼ button until Language is highlighted.
DLP Projector—User’s Manual OSD Menu Overview Use the following illustration to quickly find a se tting or determine the range for a setting. – 20 –.
DLP Projector – User’s Manual – 21 – OSD Sub-Menu Overvie w.
DLP Projector—User’s Manual Image Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Image Menu . Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to change values for settings.
DLP Projector – User’s Manual Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Advanced menu and then press Enter or ► . Press ▼▲ to move up and down in the Advanced menu.
DLP Projector—User’s Manual Color Manager (Enter) / ► to enter the Color Manager sub menu. Press I TEM D ESCRIPTIO N Select to enter the Red Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Red Select to enter the Green Col or Manager.
DLP Projector – User’s Manual Computer Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Com- puter menu. Press the cursor ▲▼ button to move up and down in the computer menu. Press ◄► to change values for settings.
DLP Projector—User’s Manual Video/Audio Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Video/Audio menu. Press the cursor ▲▼ button to move up and down in the Video/Audio menu. Press ◄► to change values for settings.
DLP Projector – User’s Manual Audio (Enter) / ► to enter the Audio sub menu. Press I TEM D ESCRIPTIO N Press the ◄► butt ons to adju st the audio volume. (Range: 0~8) Volum e Mute Press the ◄► buttons to turn on or off the speaker . Press the cursor ◄► button to select audio input.
DLP Projector—User’s Manual Installation I Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installa- tion I menu. Press the cursor ▲▼ button to move up and down in the Installation I menu. Press ◄► to change values for settings.
DLP Projector – User’s Manual Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Installation I menu. Press ▲▼ to move to the Advanced menu and then press Enter or ► . Press ▲▼ to move up and down in the Advanced menu.
DLP Projector—User’s Manual Presentation Timer The Presentation Timer func tion can indicate the presentation ti me on the screen to help you achieve better time management when giving presentation s. (Enter) / ► to enter the Presentation Timer sub menu.
DLP Projector – User’s Manual Installation II Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installa- tion II menu.
DLP Projector—User’s Manual Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Installation II menu. Press ▲▼ to move to the Advanced menu and then press Enter or ► . Press ▲▼ to move up and down in the Advanced menu.
DLP Projector – User’s Manual OSD Menu Setting I TEM D ESCRIPTIO N Menu Position Press ◄► button to select different OS D location. Translucent Menu Press ◄► butt on to select OSD background transl ucent level. Menu Disp lay Press ◄► button to select O SD timeout del ay.
DLP Projector—User’s Manual Lamp Hour Reset Please refer to on page 43 to reset the lamp hour counter. Resetting the Lamp 3D I TEM D ESCRIPTIO N 3D Press ◄► to select Off, DLP-Link or IR. 3D Sync In vert Press ◄► to turn 3D Sync I nvert On or O ff.
DLP Projector – User’s Manual Network I TEM D ESCRIPTIO N Network State Displays the netw ork connection status. Press ◄► to turn DHCP On or Off. DHCP Note: If you select DHCP Off, complete the IP Address, Subn et Mask, Gateway, an d DNS fields.
DLP Projector—User’s Manual For simplicity and ease of operation, the proj ector provides diverse networking and remote m anagement features. The LAN/RJ45 function of the pr ojector through a network, such as remotely manage: Power On/Off, Brightness and Contra st settings.
DLP Projector – User’s Manual 3. Right-click on Local Area Connection , and select Properties . 4. In the Properties window, select the General tab, an d select Internet Protocol (TCP/IP) . 5. Click Properties . 6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK .
DLP Projector—User’s Manual 7. Press the Menu button on the projector. 8. Select Installation II → Advanced → Network . 9. After getting into Net w ork , input the following: ` DHCP: Off ` IP Address: 10.10.10.10 ` Subnet Mask: 255.255.255.0 ` Gateway: 0.
DLP Projector – User’s Manual C ATEGORY I TEM I NPUT -L ENGTH IP Address 14 – 39 – IP ID 2 Crestron Control Port 5 Projector Name 10 Location 9 Projector Assigned To 8 DHCP (Ena bled) (N/ A) I.
DLP Projector—User’s Manual Factory Reset Press the cursor ▲▼ button to move up and down in the Installation II menu. Select the Factory Reset sub menu and press (Enter) / ► to reset all the menu items to the factory default values (expect Language and Security Lock).
DLP Projector – User’s Manual – 41 – M AINTENANCE AND S ECURITY Replacing the Projection Lamp The projection lamp should be replaced when it burns out. It should only be r eplaced with a certified replacement part, which you can order from your local dealer.
DLP Projector—User’s Manual 3. Remove the three screws from the lamp module. 4. Lift the module handle up. 5. Pull firmly on the module handle to remove the lamp module. 6. G Reverse steps 1 to 5 to install the new lamp module. While installing, align the lamp module with the connector and ensure it is level to avoid damage.
DLP Projector – User’s Manual Resetting the Lamp After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following: 1. Press the MENU button to open the OSD menu. 2. Press the cursor ◄► button to move to the Installation II menu.
DLP Projector—User’s Manual – 44 – Cleaning the Projector Cleaning the projector to remove dust and gr ime will help ensure trouble-free operation. Warning: 1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so could result in a severe burn.
DLP Projector – User’s Manual Using the Kensingt on ® Lock ® Using the Kensington – 45 – Lock If you are concerned about security, attach the proj ector to a permanent obje ct with the Kensington slot and a security cable. Note: Contact your vendor for details on purchasing a suitable Kensi ngton security cable.
DLP Projector—User’s Manual – 46 – T ROUBLESHOOTING Common problems and solut ions These guidelines provide tips to deal with problem s you may encounter while using the projector. If the problem remains unsolved, cont act your dealer for assistance.
DLP Projector – User’s Manual – 47 – LED Error Messages E RROR C ODE M ESSAGE S P OWER LED B LINK O VER T EMP LED L AMP LED B LINK Standby m ode ON 0 0 Over temperature 0 ON 0 Thermal brea k s.
DLP Projector—User’s Manual – 48 – Lamp Problems Problem: There is no light from the projector 1. Check that the power cable is secure ly connected. 2. Ensure the power source is goo d by te sting with another electrical device. 3. Restart the projector in the co rrect order and check that the Power LED is gree n.
DLP Projector – User’s Manual – 49 – HDMI TM Q & A Q. What is the difference between a “Standard” HDMI TM cable and a “High-Speed” HDMI TM cable? Recently, HDMI TM Licensing, LLC announced that cables would be test ed as Standard or High-Speed cables.
DLP Projector—User’s Manual – 50 – S PECIFICATIONS Specifications Model D851 D853W D855ST Display ty pe TI DMD 0.55” TI DMD 0.65” TI DMD 0.65” Resolution XGA 1024x768 WXGA 1280x 800 WXGA 1280x800 Projection distance 1 ~ 10 m 1.5 ~ 10 m 0.
DLP Projector – User’s Manual – 51 – Projection Distance vs. Projection Si ze Projection Distance and Size Table D851 T ELE W IDE Distance (m) 1.00 3.12 3.90 9.75 1.30 2.60 3.25 10.00 Diagonal (inches) 25.6 80 100 250 40 80 100 307.6 Keystone (degree) 14.
DLP Projector—User’s Manual – 52 – Timing Mode Table S IGNAL R ESOLUTION H-S YNC (KH Z ) V-S YNC (H Z ) C OMPOSITE / S-V IDEO C OMPONENT RGB DVI / HDMI TM NTSC － 15.734 60.0 O － － － PAL/SECAM － 15.625 50.0 O － － － 720 x 400 37.
DLP Projector – User’s Manual – 53 – S IGNAL R ESOLUTION H-S YNC (KH Z ) V-S YNC (H Z ) C OMPOSITE / S-V IDEO C OMPONENT RGB DVI / HDMI TM 1600 x 1200 75.0 60.0 － － O O 640 x 480 35.0 66.68 － － O O 832 x 624 49.725 74.55 － － O O 1024 x 768 60.
DLP Projector—User’s Manual Projector Dimensions – 54 –.
DLP Projector – User’s Manual – 55 – R EGULATORY C OMPLIANCE FCC Warning This equipment has been tested and found to comply wi th the limits for a Class B digital device pur- suant to Part 15 of the FCC Rules.
201009 2010 V ivitek Corporation. All rights reserved. All trademarks are the property of their respective owners. All specifications are subject to change without prior notice.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Vivitek D855ST è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Vivitek D855ST - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Vivitek D855ST imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Vivitek D855ST ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Vivitek D855ST, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Vivitek D855ST.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Vivitek D855ST. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Vivitek D855ST insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
