Manuale d’uso / di manutenzione del prodotto Minibar del fabbricante Unigreen
Vai alla pagina of 32
09/2006 USE AND MAINTENANCE MANU AL MISTBLO WERS AIRDR OP - MFC ® MOUNTED MISTBLOWERS serie AIRDR OP P- MFC P: V entagli - Minibar - Super Spalliera - R V -GDC Read this manual carefully bef ore use .
2 unigreen Summary 1 USING AND KEEPING THE USE AND MAINTENANCE MANU AL ....................... 4 1.1 COMPOSITION OF THE MANUAL ...................................................................................... 4 1.2 GU ARANTEE ....................
unigreen 3 6.4.1 BA TCHING T APS (SEE PICTURE 20) ............................................................................... 21 6.4.2 CALIBRA TED PLA TES CP .........................................................................................
4 unigreen Thank you f or ha ving chosen UNIGREEN. The product you purchased has been designed and b uilt with the greatest attention to the safety of the oper ator and the en vironment, nev ertheless there are still some residual risks due to the nature of the product used.
unigreen 5 2 SAFETY REGULA TIONS AND RESIDU AL RISKS In relation to saf ety , the following terms will be used: Dangerous zones: any z one inside and/or near the machine where the presence of a person e xposed constitutes a risk for the saf ety and health of the same person.
6 unigreen 2.1 INTENDED USE The spra y er in this series is built f or agricultural use. The materials used are resistant to nor mal chemical products used in agricultural spra ying (or herbicides) at the time of construction.
unigreen 7 Ref er to the enclosed handbooks f or the use and maintenance of the pump and pressure regulator and any accessories or motors. b) Please contact the agent in your z one , the nearest author ised w orkshop or UNIGREEN S.p .A. directly f or any repairs the user f eels they aren’t capab le of perf or ming alone.
8 unigreen 3.2 NOISE LEVEL OF THE MA CHINE Use earmuffs to protect your ears when using the machine, belo w you will find the data on the maximum noise le vels during work.
unigreen 9 4.2 PRELIMINAR Y CHECKS When you receiv e the machine , check that it is complete and no par ts are missing. If there are any damaged parts, inform your local reseller or UNIGREEN directly in good time.
10 unigreen 4.4 TRA CTOR COUPLING The tractor must ha ve 1”3/8 ASAE DIN 9611/A po wer-tak eoff that runs at 550 r pm. It m ust ha v e a 3-point elev ator suitab le f or saf ely suppor ting the weight of the atomiser . Check this by consulting the tab le of allo wed fittings N° 18a (pages 31).
unigreen 11 4.5 CARD AN SHAFT In some models this is supplied on request. The cardan shaft must bear the CE mark. It must alwa ys ha v e its own instructions that must be follo wed scrupulously and it should come with a cov er bearing the mark, integrated in ev ery par t .
12 unigreen 4.8 PRESSURE REGULA TOR T o use the pressure regulator , f o llow the instructions in the enclosed handbook scrupulously . The pressure regulator controls all of the most impor tant spraying functions , the thorough kno wledge of its functions makes work easier and more precise.
unigreen 13 = adjust maximum pressure v alv e B to the working value (in an y case less than the safe maxim um pressure the system can reach). Pressure regulators with a v olumetric v alve (GCP ELETTRICO) Adjusting the maximum pressure v alv e = put main control A in the dr ain position (“OFF”).
14 unigreen 4.10 FILLING THE T ANK The machines for def ensive crop treatments, in consideration of the saf ety of persons, animals and the protection of the environment, m ust only be filled indirectly from open water courses and only b y free-f alling water from the waterworks.
unigreen 15 4.12 MIXING The active principle can be mix ed using the rele v ant stirrers bef ore and during the treatment. Correct mixing and stirring is the basis of the correct distribution on the crops. W e recommend some useful accessories such as the premix er f or powders and liquids (see the f ollowing par agraph).
16 unigreen 4.1 3 W ASHING THE A T OMISER After ev er y treatment, thoroughly clean the equipment, w ashing it with water inside and out. Dir ty equipment is v er y dangerous f or people and in par ticular f or children. Discharging the residues of washing in the en vironment without taking precautions is forbidden as this pollutes w ater courses .
unigreen 17 5 BLO WER GROUP All the mistblower s ha ve a high speed fan rotor . Y ou must take great care and beware of the eff ects that this can pro v oke: such as the aspiration and projection of f oreign bodies whic h, although of a small size, can be very dangerous especiall y f or the eyes and face.
18 unigreen 5. 3 DISTRIBUT OR A CCESSORIES V arious configurations of accessor ies or distr ib utors are fitted to the outlet of the fans . At present these are: 2 F ans , Canop y and Espalier - Double espalier Minibar - R V espalier and GDC - VL Espalier - FXF "Up and Ov er" boom f or espalier .
unigreen 19 5.3.3 R V B O O M FO R G D C This boom has lateral diffusers (v ariable and mov eab le) and two top arms with hydraulic or manual adjustment, so the jets can be directed onto the vegetation to be treated. In the bottom par t there are two adjustable , telescopic distributors f or GDC treatment.
20 unigreen 6 SPRA YING W ARNING: the indications to follo w when using chemical products are indicated in paragraph 2.2.1. 6.1 DESCRIPTION OF THE DIFFUSERS The distributor accessories of the AIRDROP range are equipped with variab le diffusers (FIG.
unigreen 21 F or instance, ha ving a mistblo wer with f ans and kno wing: - the wo r king length L = 4,0 meters; - the forw ard speed of 5,0 km/h; - the tap le ver in position 2; - the pressure adjusted at 2,0 bars you will ha v e a flow r ate v alue of 7,0 l/min.
22 unigreen 7 HAND LANCES When using hand lances bear in mind the f ollowing notes: = Don’t direct the jet of liquid tow ards electr ic pow er lines or zones where there is electrical current, houses or where people might pass. = Don’t point the jet at people or animals.
unigreen 23 significantly higher speeds, in general g rease is used to lubricate bear ings with a v er tical or inclined axis as it sta ys in the zone f or longer . 8.2.3 MUL TIPLIER LUBRICA TION The multiplier and disengaging bo x es are normally lubr icated in an “oil bath”, in special cases NLGI n.
24 unigreen 8 .7 DEMOLITION AND DISPOSAL When the spra y er will be put out of ser vice you should w ash it with great care to remov e any residues of chemical product, f ollow the instructions in point 4.13 of the present handbook. A TTENTION: It is necessar y to adopt appropr iate Individual Protection Devices in manipulating w aste.
unigreen 25 T ABLES FOR CALIBRA TING AIRDROP 2 VENT A GLI (F ANS) AIRDROP CALIBRA TING T ABLES N.B. to calculate the diff erent ranges it is sufficient to multiply the v alue lt/hectare b y the corresponding width indicated in the table and divide it b y the ne w width (see chapter 6.
26 unigreen Tabe ll a e roga z i one in Li tri/ e t ta ro pe r diff us ori a v ent a gli o + diff usor i super i ori MF C ® sy ste m uni gr een s pa Lt .
unigreen 27 T ABLES FOR CALIBRA TING AIRDROP MINIB AR AIRDROP CALIBRA TING T ABLES N.B. to calculate the diff erent ranges it is sufficient to multiply the v alue lt/hectare b y the corresponding width indicated in the table and divide it b y the ne w width (see chapter 6.
28 unigreen AIRDROP CALIBRA TING T ABLES N.B. to calculate the diff erent ranges it is sufficient to multiply the v alue lt/hectare b y the corresponding width indicated in the table and divide it b y the ne w width (see chapter 6.
unigreen 29 T ABLE 4-5 T ABLES OF DELIVER Y OF NOZZLES FOR HAND LANCES T ABLE OF DELIVER Y IN LITRES / MIN. OF THE CONICAL NOZZLES FOR MITRA SPRA Y GUN note: standard Ø2,5 nozzle DIAMETER NOZZLE Ø 1.
30 unigreen T ABLE 7 T ABLE OF PR OGRAMMED MAINTENANCE OPERA TION 8 h 50 h 300 h END OF SEASON Check the le v el and state of the oil 0 Check the accum ulator pressure 0 Check the suction (hoses , pip.
unigreen 31 T AB.18A ALLO WED FITTINGS 20 05 MO UN T ED AT O MI SER S TYPE O F Pol y ethy l ene Tank MA CHINE TA B . 1 8 a FITTIN G Nomin al c apac ity ( L.
Descriptions, indicativ e illustrations , UNIGREEN S.P .A. reser ves the right to make v ariations or modifications without prior wa r ning. via Rinaldi, 105 - Loc. Cavazzoli (Reggio Emilia) - ITALY Tel. +39 0522 369811 Fax. +39 0522 369898 e-mail: info@unigreen-spa.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Unigreen Minibar è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Unigreen Minibar - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Unigreen Minibar imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Unigreen Minibar ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Unigreen Minibar, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Unigreen Minibar.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Unigreen Minibar. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Unigreen Minibar insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
