Manuale d’uso / di manutenzione del prodotto N-FX-MT-01 del fabbricante Transition Networks
Vai alla pagina of 16
Ethernet ™ 10/100BASE-SX, 100BASE-FX PCI Network Interface Cards N-FX-ST -01, N-FX-SC-01, N-FX-MT -01, N-SX-ST -01, N-SX-SC-01, N-SX-MT -01, ND-FX-ST -01, ND-FX-SC-01, ND-FX-MT -01, ND-SX-ST -01, ND-SX-SC-01, ND-SX-MT -01 USER’S GUIDE Adapter Hardware Installation .
ADAPTER HARDW ARE INST ALLA TION Follow Instructions outlined in the indicated personal computer user ’ s guide for installing PCI Bus add- in cards into a PCI slot that supports bus mastering. CAUTION: Heed the warnings in the PC user ‘s guide in regard to proper protection against static discharge.
PCI NETWORK INTERF ACE CARDS TRANSITION Networks Fiber -Optic PCI Network Interface Cards (Adapters) are 32-bit bus-mastering PCI cards that support both half-duplex and full-duplex operation and that comply with PCI Specifications, revision 2.1 and 2.
ADAPTER SOFTW ARE INST ALLA TION NOTE TRANSITION Networks Fiber -Optic PCI Network Interface Cards (Adapters) are shipped with one (1) CD driver disk containing software drivers for various network operating systems, diagnostic utilities, and electronic format documentation.
21. When the system comes up open Netowok Neighborhood by right clicking 22. Click on " Properties" 23. Highlight "T ransition LANart …." And , Click on "Properties" 24. Click on Advanced 25. Chose the properties as required by Network Administrator 26.
MICROSOFT WINDOWS 95 - SOFTW ARE UPGRADE 1. Power up the computer , and start W indows 95. 2. The following instruction is to update the driver for LANart network card. 3. Update the driver for T ransition Networks / LANart (EF A020X) - open the control panel by clicking "Start," then "Settings," then "Control Panel.
MICROSOFT WINDOWS 98 - NEW INST ALLA TION 1. Copy the appropriate device install script For NDIS3 MAC driver type copy A:Win98Nids3MacNetamd.inf C:WindowsInf For NDIS4 MINIPOR T driver type copy A:Win98Nids4MiniNetamd.inf C:WindowsInf 2. Shutdown W indows 98 and power -off the machine.
19. Double Click "system" 20. Click "Device Manager" 21. Double Click "Network Adapter" 22. Highlight " …." And , Click on "Properties" 23. Click on Advance 24. Chose the properties as required by the Network Administrator 25.
MICROSOFT WINDOWS 98 - SOFTW ARE UPGRADE 1. Power up the computer and start W indows 98. 2. Update the driver for the PCI card - open the control panel by clicking "Start," then "Settings," then "Control Panel." 3. Double Click "system" 4.
MICROSOFT WINDOWS NT 4.0 - NEW INST ALLA TION 1. Install the T ransiton (EF A020X series) Adapter card in accordance with your personal computer user's manual.
MICROSOFT WINDOWS NT 4.0 - SOFTW ARE UPGRADE 1. Start W indows NT , and open the control panel by clicking "Start," then "Settings," then "Control Panel." 2. Double Click on "Network." 3. Click on the Adapters tab.
NOVELL NETW ARE 4.X / 5.X - NEW INST ALLA TION 1. Power off the machine. 2. Install the T ransiton / LANart (EF A020X ) Adapter card in accordance with your personal computer user's manual. Again, follow all handling procedures to avoid electro-static discharges.
NOVELL NETW ARE 4.X/ 5.X - SOFTW ARE UPGRADE/ADDING NETWORK CARD TO AN EXISTING SYSTEM. 1. Shutdown Netware Server and power -off the machine. 2. Install the T ransiton / LANart (EF A020X series) Adapter card in accordance with your personal computer user's manual.
MICROSOFT WINDOWS NT 4.0 - PERMANET SER VER The PermaNet Server feature allows users to configure a pair of LANart PCI device based NIC as primary and secondary , and provides the ability to automatically fail-over from primary adapter to the secondary adapter should the link status of the primary go down 1.
INST ALLING SUNSOFT SOLARIS DRIVER (X86 ENVIRONMENT) 1. Login as root 2. Copy from the media /solaris/pnt-solaris.pkg to /var/spool/pkg 3. At the prompt. T ype, Pkgadd – d pnt-solaris.pkg and follow the instruction on the screen 4. W ait for the process to complete 5.
COMPLIANCE INFORMA TION CISPR/EN55022 Class A FCC Regulations This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Transition Networks N-FX-MT-01 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Transition Networks N-FX-MT-01 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Transition Networks N-FX-MT-01 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Transition Networks N-FX-MT-01 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Transition Networks N-FX-MT-01, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Transition Networks N-FX-MT-01.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Transition Networks N-FX-MT-01. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Transition Networks N-FX-MT-01 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
