Manuale d’uso / di manutenzione del prodotto AV200 del fabbricante TP-Link
Vai alla pagina of 48
TL-WP A4220 300Mbp s A V500 WiFi Powerline Extender TL-WP A281 300Mbp s A V200 WiFi Powerline Extender REV1.0.0 1910010849.
COPYRIGHT & TRADEMARKS S pecifications ar e subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered trademarks of their respective holders.
FCC ST A TEMENT This equipment has been tested and found to comply with the limits for a Class B digit al device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa tion.
Safety Information z When product has power button, the power button is one of the way to shut of f the product; when there is no power button, the only wa y to completely shut off power is to disconnect the product or the power adapter from the power source.
TP-LINK TECHNOLOGIES CO., L TD TP-LINK TECHNOLOGIES CO., L TD. Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and T echnology Park, Shennan Rd, Nanshan, Shenzhen, China DECLARA TION OF CONFORMITY For the following equipment: Product Description: 300Mbp s A V500/A V200 W iFi Powerline Extender Model No.
Import ant Safety Instructions 1. Do not open this product or attempt to servic e it; it may expose you to dan gerous high voltage or other risks. 2. Do not operate this product near water . 3. Do not place or operate this produc t near a radiator or a heat register .
CONTENTS Chapter 1 Introduction ...................................................................................................... 1 1.1 System Requirement ...........................................................................................
3.6.6 System Log .......................................................................................................................... 29 Chapter 4 Connecting to Wireless Network ................................................ 30 4.1 In Windows 7 .
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 1 Chapter 1 Introduction Congratulations on your purchase of this outst anding 300Mbps A V500/A V200 WiFi Powerline Extender .
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 2 1.3 Conventions The extender , or TL-WP A4220/TL- WP A281, or devic e mentioned in this User Guide stands for TL-WP A4220/TL-WP A281 300Mbps A V500/A V200 WiFi Po werline Extender without any explanations .
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 3 Chapter 2 Hardware Connection 2.1 Before You Begin Please read this User Guide carefully before inst alling and using the equipmen t. The operating distance or range of your wireless connection varies si gnificantly based on the phy sical placement of the powerline extender .
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 4 LEDs Name Statu s Indication Solid The device is on. Off The device is off. Power LED Blinking The device is in the pairing procedure. Solid The device is connected to a powerline network, but there is no data being transferred.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 5 2.3 Physical Interface There are four physical items on this device. Item Description Wi-Fi/Wi-Fi Clone Button Press the button for 2 seconds to start Wi-Fi Clone. Press the button for 5 seconds to enable or disable the wireless function.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 6 2 ． Connect the other end of the Ethernet (RJ45) cable to an available Ethernet port of your wireless router . 3 ． Plug the powerline extender or pow erline adapter into a wall socket.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 7 The hardware connection mec hanism is shown bel ow: As soon as the powerline devices are connected following the step s above, a powerl ine network is available.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 8 2.5 Wi-Fi Clone Button for Super Range Extension Wi-Fi Clone button is used for c opying the wireless settings (including SSID and wireless password) from the front wireless router .
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 9 ) Note: If you want to establish a secure and sep arate wirele ss network from the wireless router , please refer to 3.4.2 Wireless Security to set a dif feren t SSID and passphrase for your powerline extender .
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 10 Chapter 3 Configure the Device This Chapter describes how to configure your Ac cess Point via the web-based management page.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 11 2. Find the model to be configured and click Connect to log in the Web-based management utility .
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 12 ) Note: If the above screen does not prompt, it means that your web-browser has been set to a proxy . Go to T ools >Internet Options>Connections>LAN Settings , in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it .
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 13 3.2 Status The St atu s page displays the powerline extender ’s current st atus and configuration. All information is read-only . Figure 3-6 S tatus ¾ Firmware Version - This field displays the current firmwa re ver sion of the powerline extender.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 14 ¾ Wireless - This field displays the current settings or information for wireless. They can be configured on the Wireless → Wireless Settings p age. z Wireless Radio - Indicates whether the wireless radio f eature of the powerline extender is enabled or disabled.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 15 the powerline extender an ideal solution for your wire less network. Here you can create a wireless local area network just through a few settings. Wireless Setti ngs is used for the confi guration of some basic parameters of the powerline extender .
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 16 function of the powerline extender in a region other than one of those s pecified in this filed. If your country or region is not list ed, please contact your local government agency for assistance.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 17 WP A/WP A2 and WP A-PSK/WP A2-PSK. The default passw ord can be found on the label at the bottom of the device. Wireless security can be configured on the following screen shown as Figure 3-10.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 18 • WEP Key Format - Y ou can select ASCI I or Hexadecimal format. ASCII format stands for any combination of keyboard characte rs in the specified length. He xadecimal format st ands for any combination of hexadecimal digits (0-9 , a-f, A-F) in the specified length.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 19 Figure 3-13 WP A-PSK/WP A2-PSK • Ve r s i o n - Y ou can select one of following versions. 9 Automatic - Select WP A-PSK or WP A2-PSK automatically based on the wireless station's capability and request.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 20 Figure 3-15 Add or Modify Wireless MAC Address Filtering entry ¾ MAC Address - Enter the wireless station's MAC addr ess that you want to control. ¾ Description - Give a simple description of the wireless station.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 21 For example: If you desire that the wirel ess station A with MAC ad dress 00-0A-EB-00- 07-BE is able to access the device, while all other wi reless stations cannot access the de vice, you should confi gure the Wire less MAC Address Filtering list by following these steps: 1.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 22 ¾ RTS Threshold - Specifies the RTS (Request to Send) Thre shold. If the packet is larger than the specified RTS Threshold size, t he device will send RTS frames to a particular receiving station and negotiate the sending of a data fram e.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 23 ) Note: This page will be refreshed aut omatically every 5 seconds. 3.5 Powerline There are two submenus under the Powerline menu (shown in Figure 3-8): Netw ork Settings and St ation Settings .
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 24 Figure 3-20 S tation Settings ¾ MAC Address - The remote station's MAC addres s. The value can not be changed. ¾ Device Passw ord - The security ID of remote station. ¾ Device Name - The name used for i dentifying a station.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 25 Figure 3-22 Add a new station Click the Refresh button to update the curr ent connected stations. Click the Next button to go to the next page and click the Previous butto n to return to the previous page.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 26 Figure 3-24 Firmware Upgrade New firmware versi ons are posted at http://www .tp-link.com and can be downloaded for free. ¾ Firmware V ersion - Here displays the current firmware version.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 27 3.6.2 Factory Defaults Selecting S ystem T ools > Factory Default s allows you to restore the factory default settings for the device on the screen shown in Figure 3-25.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 28 3.6.4 Reboot Selecting S ystem T ools > Reboot allows you to reboot the de vice on the screen shown in Figure 3-27. Figure 3-27 Reboot the device Click the Reboot button to reboot the device.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 29 3.6.6 System Log Selecting S ystem T ools > System Log allows you to query the Logs of the device on the screen shown in Figure 3-29. Figure 3-29 System Log The device can keep logs of all tr affic.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 30 Chapter 4 Connecting to Wireless Network The default SSID is TP-LINK_××××××. (×××××× stand fo r the last six unique numbers of the WLAN MAC which can be found on the label at the bottom of the device.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 31 2. Input the network key and then click OK . Figure 4-2 ) Note: If your network is an unsecured network, you will not be prompted to input the network key . 3. Y ou have joined the home network an d can surf the Internet now .
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 32 4.2 In Windows Vista Windows Vista users may use the built-in wireless utility . Follow the steps below . 1. Right-click the icon at the bottom of your screen, then click Connect to a net work .
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 33 3. Input the netwo rk key and then click OK . Figure 4-6 ) Note: If your network is an unsecured network, you will not be prompted to input the network key . 4. Y ou have joined the ho me network and can surf the Internet now .
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 34 4.3 In Windows XP Windows XP users may use the built-in wi reless utility . Follow the step s below . 1. Click the icon at the bottom of your desktop, select the SSID of TL-WP A4220 and then click Connect .
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 35 1. Click the icon at the bottom of your desktop, select the SSID of TL-WP A 4220 and then click Connect . 2. Input the network security key and then click Next . ) Note: If your network is an unsecured network, you will not be prompted to input the network key .
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 36 4. Y ou have joined the home network an d can surf the Internet now ..
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 37 Chapter 5 Pair Button and Reset Button 5.1 Pair (Secure with 128 bits-AES) The Homeplug A V standard uses 128-bit AES (Advanc ed Encryption S tandard) to safely transmit data between powerline dvices.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 38 Ste p 2 . Within two minutes, press and hold the Pair button on Powerline device A/B for one second. Ste p 3 . Wait for about 60 secon ds while your powerlin e devices are connecting.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 39 Appendix A: T roubleshooting Guide The Troubleshooting Guide pr ovides answers to common problems regardi ng the powerline Ethernet adapter. 1. The Power LED does not light up. Ans.
TL-WP A4220/TL-WP A281 300Mbp s A V500/A V200 WiFi Powerline Extender 40 Appendix B: S pecifications HARDWARE FEATURES Standards and Protocols HomePlug AV, IEEE802.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il TP-Link AV200 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del TP-Link AV200 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso TP-Link AV200 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul TP-Link AV200 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il TP-Link AV200, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del TP-Link AV200.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il TP-Link AV200. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo TP-Link AV200 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
