Manuale d’uso / di manutenzione del prodotto AV1200 del fabbricante TP-Link
Vai alla pagina of 27
TL-P A8010P A V1200 Gigabit Passthrough Powerline Adapter REV1.0.0 191001 1 141.
COPYRIGHT & TRADEMARKS S pecifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered trademarks of their respective holders.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digita l device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa tion.
Safety Information When product has power button, the power button is one of the way to shut of f the product; when there is no power button, the only wa y to completely shut off power is to disconnect the product or the power adapter from the power source.
TP-LINK TECHNOLOGIES CO., L TD DECLARA TION OF CONFORMITY For the following equipment: Product Description: A V 1200 Gigabit Passthrough Powerline Adapter Model No.
CONTENTS Chapter 1 Introduction ......................................................................................... 1 1.1 System Requirement ..................................................................................... 1 1.2 Important Safety Instructions .
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 1 Chapter 1 Introduction This device is an A V 1200 Gigabit Passthrough Powe rline Adapter which transforms your house’s existing electrical wiring into a ubiquitous networking in frastructure.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 2 9. When pluggi ng this product into a wall socket, make sure that the electric al socket is not damaged, and that there is no gas leakage. 10. Place the connecting cables properly so that people won’t stumble or walk on it.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 3 Item Statu s Indication Y ellow-green Powerline network is in good condition. Red Powerline network is in poor condition. We recommend trying another wall socket. Powerline LED Off The powerline adapter is not connected to any powerline network or is in Power-Saving Mode.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 4 Note: 1. If the pair button is presse d for about 8 seconds , the powerline adapter will leave the network which it has joined and its new network name assumes a random value. The Powerline LED turns off when it disconnects from the powerline network.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 5 Chapter 2 Connecting Mechanism 2.1 Introduction The powerline adapter supports up to 1200Mbps data rate. With this high speed connection rate, this powerline adapter allows you to set up a high s peed home network by usi ng your home existing electrical wiring.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 6 2.3 Hardware Connection – Computer For those computers you wish to be networked by powerline adapter , each of the computers must be properly connected with a powerline adapt er through an Ethernet (RJ45) cable.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 7 2.4 Hardware Connection – Internet This section describes how to connect the power line adapter into your existing ADSL broad band connection via ADSL Ethernet port.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 8 Chapter 3 Inst alling Management Utility Please verify that no other powe rline adapter or any Encryption Management Utilities are installed before installing the provided software.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 9.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 10.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 11 S tep 3: After the installation, a sh ortcut to the “PowerLine Utility ” application icon is provided o n the windows desktop.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 12 Chapter 4 Using the Management Utility After you’d successfully installed the powerline adapt er hardware and Managem ent Utility software, you can set up or configure the devic es according to your need.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 13 MAC Address: Displays the MAC address of the pow erline adapter connected to the current computer where this m anagement utility is running. Network Name: Displays the network name of the current network or yo u can give a name for the network in which the powerline adapter is.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 14 4.2 Network The Netw ork tab window shows informati on of all the powerline devices found on the current logical network. Furthermore, here you can change the device name of the list ed powerline devices as well as add another device to the current network.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 15 network name of th is device on the System configuration page. To c hange the name of a powerli ne device or enter its password, please follow the steps below: (1) Select the desir ed device and click the Modify button to display the following dialog.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 16 4.3 Advanced The third tab window labeled “ Advanced ” is for Quality of Service. With the prop er configuration, the limit bandwidth can be took full advantage. QoS requirem ents are dif ferent for various data types such as streaming video or music, voice and ra w data.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 17 Simple Application Mapping: The group allows you to choose what type of traffic with the highest user priority you will use your local HomePlug de vice for by pitching one of the following radios.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 18 NVM : None-volatile memory. It is us ed for upgrading the firmware. PIB : Parameter Information Block. It contains configuration values that establish device network identity, general capab ilities and operational modes.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 19 4.4.3 Set All Devices’ Network Name The Set All Devices’ Network Name function allows you to change the logical network of all devices that appear on the Network configuration homepage whose Device Password had been entere d for the same logical network.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 20 Chapter 5 Advanced Feature: How to Use the Pair Button 5.1 Set Up a Secure Powerline Network The Homeplug A V standard uses 12 8-bit AES (Advanced Encryption S t andard) to safely transmit data between powerline adap ters.
TL-P A8010P A V1200 Gigabit Passthrough Po werline Adapter 21 Appendix A: T roubleshooting The Troubleshooting provides answers to comm on problems regardin g the powerline adapter. 1. The Power LED does not light up. Ans. Check the following: a) Make sure that the powerline adapter is properly plugged into a power outlet.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il TP-Link AV1200 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del TP-Link AV1200 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso TP-Link AV1200 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul TP-Link AV1200 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il TP-Link AV1200, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del TP-Link AV1200.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il TP-Link AV1200. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo TP-Link AV1200 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.