Manuale d’uso / di manutenzione del prodotto PORTG A600 del fabbricante Toshiba
Vai alla pagina of 406
[CONFIDENTIAL] Toshiba Personal Computer PORTÉGÉ A600 Maintenance Manual First edition September 2008 TOSHIBA CORPORATION File Number 960-710.
ii [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) Copyright © 2008 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the inform ation contained herein.
PORTEGE A600 Maintenance Manual (960-710) [ CONFIDENTIAL] iii Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer PORTEGE A600 The p.
iv [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) The manual is divided into the following parts: Chapter 1 Hardware Overview describes the PORTEGE A600system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems.
PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] v Conventions This manual uses the following formats to describe, identify, and highlight term s and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following their definition.
vi [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) Table of Contents Chapter 1 Hardware Overview 1.1 Features ................................................................................................................... ... 1-1 1.2 System Unit Block Diagram .
PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] vii Chapter 2 Troubleshooting Procedures 2.1 Troubleshooting ......................................................................................................... 2- 1 2.2 Troubleshooting Flowchart .
viii [CONFIDENTIAL] PORTEG E A600 Maintenance Manual (960-710) Chapter 3 Tests and Diagnostics 3.1 The Diagnostic Test ................................................................................................... 3-1 3.2 Executing the Diagnostic Test .
PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] ix 3.3 2 SETUP ..................................................................................................................... 3-81 Chapter 4 Replacement Procedures 4.1 Overview ..........
x [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710).
[CONFIDENTIAL] Chapter 1 Hardware Overview.
1 Hardware Overview 1-ii [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710).
1 Hardware Overview PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 1-iii Chapter 1 Contents 1.1 Features................................................................................................................... ....1-1 1.2 System Unit Block Diagram .
1 Hardware Overview 1-iv [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) Figures Figure 1-1 Front of the computer ....................................................................................1- 7 Figure 1-2 System un it configuration..
1.1 Features 1 Hardware Overview PORTEGE A600 Maintenance Manual (960-710 [ CONFIDENTIAL] 1-1 1.1 Features The Toshiba PORTEGE A600 Personal Computer uses extensive Large Scale Integration (LSI), and .
1 Hardware Overview 1.1 Features 1-2 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) SSD Some models are equipped with a "Solid State Drive (SSD)" instead of a hard disk drive. • 64GB,128GB USB FDD A 3.5-inch USB FDD accommodates 2HD (1.
1.1 Features 1 Hardware Overview PORTEGE A600 Maintenance Manual (960-710 [ CONFIDENTIAL] 1-3 Batteries The computer has two batteries: a rechargeable Lithium-Ion m ain battery pack and RTC battery (that backs up the Real Time Clock and CMOS mem ory.
1 Hardware Overview 1.1 Features 1-4 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) Docking interface port The docking interface port enables connection of an optional Slim Port Replicator II.
1.1 Features 1 Hardware Overview PORTEGE A600 Maintenance Manual (960-710 [ CONFIDENTIAL] 1-5 Wireless LAN The computer is equipped with PCI-Ex MiniCard type wireless LAN board that supports 802.11 b/g, 802.11 a/b/g or 802.11 a/b/g/n in the PC I-Ex MiniCard slot.
1 Hardware Overview 1.1 Features Figure 1-1 Front of the computer 1-6 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710).
1.1 Features 1 Hardware Overview The system unit configuration is shown in figure 1-2. Figure 1-2 System unit configuration PORTEGE A600 Maintenance Manual (960-710 [ CONFIDENTIAL] 1-7.
1 Hardware Overview 1.2 System Unit Block Diagram 1.2 System Unit Block Diagram Figure 1-3 is a block diagram of the system unit. Figure 1-3 System unit block diagram 1-8 [CONFIDENTIAL] PORTEGE A600 M.
1.2 System Unit Block Diagram 1 Hardware Overview PORTEGE A600 Maintenance Manual (960-710 [ CONFIDENTIAL] 1-9 The system unit is composed of the following m ajor components: Microprocessor The Toshiba PORTEGE A600 computer is equipped with an Intel ® Core TM 2 Duo ULV Processor.
1 Hardware Overview 1.2 System Unit Block Diagram 1-10 [CONFIDENTIAL] PORTEG E A600 Maintenance Manual (960-710) North Bridge (Intel Cantiga GS :Intel GS45) • • • • • • • • • • • • • • • • • • • • Penryn Processor System Bus Supports System Memory supports :DDR2-667 ／ DDR2-800, 5GB m ax.
1.2 System Unit Block Diagram 1 Hardware Overview PORTEGE A600 Maintenance Manual (960-710 [ CONFIDENTIAL] 1-11 Card controller (R5C847) • • - PCI Interface - SD/MMC, Memory Stick, xD card Controller VGA Controller An internal Graphics Controller in North Bridge is used.
1 Hardware Overview 1.2 System Unit Block Diagram 1-12 [CONFIDENTIAL] PORTEG E A600 Maintenance Manual (960-710) Internal LAN Controller • Intel made only GigaBit Ether is used.
1.2 System Unit Block Diagram 1 Hardware Overview PORTEGE A600 Maintenance Manual (960-710 [ CONFIDENTIAL] 1-13 PSC (Power Supply Controller) • One TMP86FS49AUG chip is used. • This controller controls the power sources. EEPROM for security • M24C08-WDW 6TP (ST micro) chip is used.
1 Hardware Overview 1.3 3.5-inch Floppy Disk Drive (USB External) 1.3 3.5-inch Floppy Disk Drive (USB External) The 3.5-inch FDD is a thin, high-performance reliable drive that supports 720KB (formatted) 2DD and 1.44MB (formatted) 2HD disks. The FDD is shown in figure 1-4.
1.4 2.5-inch Hard Disk Drive 1 Hardware Overview 1.4 2.5-inch Hard Disk Drive The removable HDD is a random access non-volatile storage device. It has a non-rem ovable 2.5-inch magnetic disk and mini-W inchester type magnetic heads. The computer supports a 80GB, 120GB, 160GB, 200GB or 250GB.
1 Hardware Overview 1.4 2.5-inch Hard Disk Drive 1-16 [CONFIDENTIAL] PORTEG E A600 Maintenance Manual (960-710) Table 1-2 2.5-inch HDD specifications Specifications Items HGST G8BC00051 080 HGST G8BC00051 120 HGST G8BC00051 160 HGST G8BC00046 200 HGST G8BC0005 1250 Outline Width (mm) 100.
1.5 1.8-inch Solid State Drive (SSD) 1 Hardware Overview PORTEGE A600 Maintenance Manual (960-710 [ CONFIDENTIAL] 1-17 1.5 1.8-inch Solid State Drive (SSD) Some models are equipped with a "Solid State Drive (SSD)" instead of a hard disk drive.
1 Hardware Overview 1.6 DVD-Super Multi Drive Optical Drive (ODD) 1-18 [CONFIDENTIAL] PORTEG E A600 Maintenance Manual (960-710) 1.6 DVD-Super Multi Drive Optical Drive (ODD) The DVD Super Multi drive accommodates either 12 cm (4.72-inch) or 8 cm (3.15-inch) CD-ROM, DVD-ROM, CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW , DVD- RAM.
1.7 Keyboard 1 Hardware Overview 1.7 Keyboard The keyboard is mounted 85(US)/87(UK) keys that consist of character key and control key, and in conformity with JIS. The keyboard is connected to mem brane connector on the system board and controlled by the keyboard controller.
1 Hardware Overview 1.8 TFT Color Display 1.8 TFT Color Display The TFT color display consists of 12.1-inch WXGA LCD module. 1.8.1 LCD Module The LCD module used for the TFT color display uses a white LED backlight as the light source and can display a maximum of 16M colors with 1,200 x 800 resolutions.
1.9 Power Supply 1 Hardware Overview PORTEGE A600 Maintenance Manual (960-710 [ CONFIDENTIAL] 1-21 1.9 Power Supply The power supply supplies many different voltages to the system board and perform s the following functions: 1. Judges that the DC power supply (AC adapter) is connected to the computer.
1 Hardware Overview 1.9 Power Supply 1-22 [CONFIDENTIAL] PORTEG E A600 Maintenance Manual (960-710) Table 1-6 Power supply output rating ACPI state S3/S4/S5 S3 S3 S4/S5 S4/S5 G3 M state M1 Moff Moff Moff Moff Wakeup - WOL No WOL WOL No WOL Pow e r line name Voltage [V] Name Object P * PPV × × × × × × CPU * IGD-PGV × × × × × × (G)MCH 1.
1.10 Batteries 1 Hardware Overview PORTEGE A600 Maintenance Manual (960-710 [ CONFIDENTIAL] 1-23 1.10 Batteries The computer has three types of batteries as follows: Main battery pack RTC battery The battery specifications are listed in Table 1-7.
1 Hardware Overview 1.10 Batteries 1-24 [CONFIDENTIAL] PORTEG E A600 Maintenance Manual (960-710) 1.10.2 Battery Charging Control Battery charging is controlled by a power supply microprocessor. The microprocessor controls whether the charge is on or off and detects a full charge when the AC adaptor and battery are attached to the computer.
1.10 Batteries 1 Hardware Overview PORTEGE A600 Maintenance Manual (960-710 [ CONFIDENTIAL] 1-25 Data preservation time When turning off the power in being charged fully, the preservation time is as following Table 1-9.
1 Hardware Overview 1.11 AC Adapter 1-26 [CONFIDENTIAL] PORTEG E A600 Maintenance Manual (960-710) 1.11 AC Adapter The AC adapter is also used to charge the battery.
[CONFIDENTIAL] Chapter 2 Troubleshooting Procedures.
Troubleshooting Procedures 2-ii [CONFIDENTIAL ] PORTEGE A600 Mainten ance Manual ( 960-710) 2.
Troubleshooting Procedures PORTEGE A600 Maintenance Man ual (960-710) [ CONFIDENTIAL] 2-iii Chapter 2 Contents 2.1 Troubleshooting ......................................................................................................... 2-1 2.2 Troubleshooting Flowchart .
Troubleshooting Procedures 2-iv [CONFIDENTIAL] PORTEG E A600 Maintenance M anual (960-710) 2.8 Display Troubleshooting .......................................................................................... 2-45 Procedure 1 Diagnostic Test Program Execution Check .
Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-v 2.17 Fingerprint sensor .................................................................................................... 2-65 Procedure 1 Setting Windows Log-ON password .
Troubleshooting Procedures 2-vi [CONFIDENTIAL] PORTEG E A600 Maintenance M anual (960-710).
2.1 Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-1 2 2.1 Troubleshooting Chapter 2 describes how to determine which Fi eld Replaceable Unit (FRU) in the computer is causing the computer to malfunction.
2 Troubleshooting Procedures 2.1 Troubleshooting There are following two types of connections in the figure of board and module connection in and after 2.3 Power Supply Troubleshooting. (1) Cable connection is descri bed in the figure as line. (2) Pin connection is describe d in the figure as arrow.
2.2 Troubleshooting Flowchart 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-3 2.2 Troubleshooting Flowchart Use the flowchart in Figure 2-1 as a guide fo r determining which troubleshooting procedures to execute.
2 Troubleshooting Procedures 2.2 Troubleshooting Flowchart Figure 2-1 Troubleshooting flowchart (1/2) 2-4 [CONFIDENTIAL ] PORTEGE A600 Maintenance Man ual (960-710).
2.2 Troubleshooting Flowchart 2 Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (2/2) PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-5.
2 Troubleshooting Procedures 2.2 Troubleshooting Flowchart 2-6 [CONFIDENTIAL ] PORTEGE A600 Maintenance Man ual (960-710) If the diagnostics program cannot detect an e rror, the problem may be intermittent. The Test program should be executed several tim es to is olate the problem.
2.2 Troubleshooting Flowchart 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-7 15. If a malfunction is detected on the fingerpr int sensor, perform the Fingerprint Sensor Troubleshooting Procedures in Section 2.
2 Troubleshooting Procedures 2.3 Power Supply Troubleshooting 2-8 [CONFIDENTIAL ] PORTEGE A600 Maintenance Man ual (960-710) 2.3 Power Supply Troubleshooting The power supply controller cont rols many functions and compone nts.
2.3 Power Supply Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-9 Table 2-2 DC IN icon DC IN icon Power supply status Lights blue DC power is being supplie d from the AC adapter. Blinks orange Power supply malfunctio n *1 Doesn’t light Any condition other than those above.
2 Troubleshooting Procedures 2.3 Power Supply Troubleshooting Procedure 2 Error Code Check If the power supply microprocessor detects a ma lfunction, the DC IN icon blinks orange.
2.3 Power Supply Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-11 Check 1 Convert the DC IN icon blink pattern into the hexadecimal error code and compare it to the tables below. Then go to Check 2.
2 Troubleshooting Procedures 2.3 Power Supply Troubleshooting 2-12 [CONFIDENTIAL ] PORTEGE A600 Maintenance Man ual (960-710) Main Battery Error code Meaning 22h Main battery discharge cu rrent is ove r 0.5A. 23h Main battery charge curre nt is over 2.
2.3 Power Supply Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-13 E3V output Error code Meaning 60h E3V voltage is over 3.96V. 61h E3V voltage is under 2.81V when the compute r is po wered on.
2 Troubleshooting Procedures 2.3 Power Supply Troubleshooting 2-14 [CONFIDENTIAL ] PORTEGE A600 Maintenance Man ual (960-710) 1R05-E1V output Error code Meaning A0h 1R05-E1V voltage is over 1.26V. A1h 1R05-E1V voltage is under 0.89V when the co mputer is powered on.
2.3 Power Supply Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-15 Check 2 In the case of error code 10h or 12h: Make sure the AC adapter and AC power cord are firmly plugged into the DC IN 15 V socket and wall outlet.
2 Troubleshooting Procedures 2.3 Power Supply Troubleshooting Procedure 3 Connection Check The wiring diagram related to th e power supply is shown below: Any of the connectors may be disconnected. Perform Check 1. Check 1 Make sure the AC adapter and the AC power cord are firmly plugged into the DC IN jack and wall outlet.
2.3 Power Supply Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-17 Procedure 5 Replacement Check The power is supplied to the system board by the AC adapter. If either the AC adapter or the system board was damaged, perform the following Checks.
2 Troubleshooting Procedures 2.4 System Board Troubleshooting 2-18 [CONFIDENTIAL ] PORTEGE A600 Maintenance Man ual (960-710) 2.4 System Board Troubleshooting This section describes how to determ ine if th e system board is malfunctioning or not. Start with Procedure 1 and continue with the other procedures as instructed.
2.4 System Board Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-19 Procedure 1 Message Check When the power is turned on, the system perfor ms the Initial Reliability T est (IRT) installed in the BIOS ROM.
2 Troubleshooting Procedures 2.4 System Board Troubleshooting 2-20 [CONFIDENTIAL ] PORTEGE A600 Maintenance Man ual (960-710) Check 3 The IRT checks the system board. When the IRT detects an erro r, the system stops or an error message appears. If one of the following error messages (1) th rough (17), (23) or (24) is displayed, go to Procedure 4.
2.4 System Board Troubleshooting 2 Troubleshooting Procedures Procedure 2 Debugging Port Check (Boot Mode) Check the D port status by a serial port test. Th e tool for serial port test is shown below. Figure 2-2 Debug port (Boot mode) error status The test procedures are follows: 1.
2 Troubleshooting Procedures 2.4 System Board Troubleshooting 6. When the D port status is FFFFh ( normal status), go to Procedure 4. 7. When the D port status falls into any status in Table 2-4, execute Check 1.
2.4 System Board Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-23 Table 2-4 Debug port error status (1/8) System BIOS Boot block processing Debug Code BIOS processing Target Device IC No.
2 Troubleshooting Procedures 2.4 System Board Troubleshooting 2-24 [CONFIDENTIAL ] PORTEGE A600 Maintenance Man ual (960-710) Table 2-5 Debug port error status (2/8) System BIOS IRT processing Debug Code BIOS processing Target Device IC No.
2.4 System Board Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-25 Table 2-6 Debug port error status (3/8) EC data reading BIOS processing r.
2 Troubleshooting Procedures 2.4 System Board Troubleshooting 2-26 [CONFIDENTIAL ] PORTEGE A600 Maintenance Man ual (960-710) Table 2-7 Debug port error status (4/8) BIOS ROM check Display setup Displ.
2.4 System Board Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-27 T Table 2-8 Debug port error status (5/8) Display setup Keystroke check s.
2 Troubleshooting Procedures 2.4 System Board Troubleshooting 2-28 [CONFIDENTIAL ] PORTEGE A600 Maintenance Man ual (960-710) Table 2-9 Debug port error status (6/8) System BIOS SUSPEND processing F137 F138 CPU setup F139 It branches to Resume (F13C)/Boot (F141).
2.4 System Board Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-29 Table 2-10 Debug port error status (7/8) System BIOS RESUME processing F1.
2 Troubleshooting Procedures 2.4 System Board Troubleshooting 2-30 [CONFIDENTIAL ] PORTEGE A600 Maintenance Man ual (960-710) Table 2-11 Debug port error status (8/8) F130 Password pro cessing EC/KBC(EC) VGA ICH(USBController) RAM IC3200(EC/KBC) IC1200(VGA) IC1600(ICH) IC1420,1421,1430,1431(RAM) IC1440,1441,1450,1451(RAM) CN1410(RAM Conn.
2.4 System Board Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-31 NOTE: Status outputted by the test means the la st error detected in the debug port test. Check 1 If the D port is status F11Eh or F120h is displayed, go to “HDD Trouble shooting Procedure in Section 2.
2 Troubleshooting Procedures 2.4 System Board Troubleshooting 2-32 [CONFIDENTIAL ] PORTEGE A600 Maintenance Man ual (960-710) Procedure 3 Diagnostic Test Program Execution Check Execute the following tests from the Diagnostic Test Menu. These tests check the system board.
2.5 USB FDD Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-33 2.5 USB FDD Troubleshooting This section describes how to determine if the USB FDD is functioning properly. Perform the steps below starting with Procedure 1 and con tinuing with the other pr ocedures as required.
2 Troubleshooting Procedures 2.5 USB FDD Troubleshooting 2-34 [CONFIDENTIAL ] PORTEGE A600 Maintenance Manual (960-710) Procedure 2 Diagnostic Test Program Execution Check Insert the Diagnostics Disk in the USB FDD, tu rn on the computer and run the test.
2.5 USB FDD Troubleshooting 2 Troubleshooting Procedures Procedure 3 Connector Check The connection of USB port is shown in the following figure. Check 1 Check the connection of the USB FDD. If the USB FDD is still not functioning properly, perform Check 2.
2 Troubleshooting Procedures 2.5 USB FDD Troubleshooting 2-36 [CONFIDENTIAL ] PORTEGE A600 Maintenance Manual (960-710) Procedure 4 Replacement Check The USB FDD or USB FDD cable may be defec tive or damaged. Replace it with a new one. If the USB FDD is still not functio ning properly, perform the following.
2.6 HDD/SSD Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-37 2.6 HDD/SSD Troubleshooting To check if the HDD/SSD is malfunctioning or not, follow the troubl eshooting procedures below as instructed.
2 Troubleshooting Procedures 2.6 HDD/SSD Troubleshooting 2-38 [CONFIDENTIAL ] PORTEGE A600 Maintenance Manual (960-710) Procedure 2 Message Check When the power is turned on, the system perfor ms the Initial Reliability T est (IRT) installed in the BIOS ROM.
2.6 HDD/SSD Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-39 Procedure 3 Format Check The computer’s HDD is formatted using the DOS FORMAT program or the physical format program of the test program.
2 Troubleshooting Procedures 2.6 HDD/SSD Troubleshooting 2-40 [CONFIDENTIAL ] PORTEGE A600 Maintenance Manual (960-710) Procedure 4 Diagnostic Test Program Execution Check The HDD test program is stored in the Diagnosti cs Disk. Perform all of the HDD tests in the Hard Disk Drive Test.
2.6 HDD/SSD Troubleshooting 2 Troubleshooting Procedures Procedure 5 Connector Check and Replacement Check The SATA HDD/ SATA SSD ma y be disconnected, or the 2.
2 Troubleshooting Procedures 2.6 HDD/SSD Troubleshooting 2-42 [CONFIDENTIAL ] PORTEGE A600 Maintenance Manual (960-710) Check 2 The 2.5 SATA HDD/ 1.8 SATA SSD ma y be damaged. Replace it with a new one following the instructions in Chapter 4, Replacement Procedu res and check the operation.
2.7 Keyboard and Touch Pad Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL ] 2-43 2.7 Keyboard and Touc h Pad Troubleshooting To determine if the computer’s keyboard or touch pad is functioning properly, perform the following procedures.
2 Troubleshooting Procedures 2.7 Keyboard and Touch Pad Troubleshooting Procedure 2 Connector Check and Replacement Check The keyboard, or touch pad may be damaged. Disassem ble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: 1.
2.8 Display Troubleshooting 2 Troubleshooting Procedures 2.8 Display Troubleshooting This section describes how to determine if the computer’s display is functioning properly. Start with Procedure 1 and continue with the other procedures as instructed.
2 Troubleshooting Procedures 2.8 Display Troubleshooting 2-46 [CONFIDENTIAL ] PORTEGE A600 Maintenance Manual (960-710) Procedure 3 Replacement Check The LCD module and system board are connect ed to display circuits. Any of these components may be damaged.
2.9 Optical Drive Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL] 2-47 2.9 Optical Drive Troubleshooting This section describes how to determ ine if the optical drive (Super Mul ti drive) in the Slim Select Bay is functioning pr operly.
2 Troubleshooting Procedures 2.9 Optical Drive Troubleshooting Procedure 2 Connector Check and Replacement Check (for SATA ODD model) The optical drive (DVD Super Multi drive) is connected to the system board. The connectors may be disconnected from the system board or may be damaged.
2.9 Optical Drive Troubleshooting 2 Troubleshooting Procedures Procedure 2 Connector Check and Replacement Check (for PATA ODD model) The optical drive (DVD Super Multi drive) is connected to the system board. The connectors may be disconnected from the system board or may be damaged.
2 Troubleshooting Procedures 2.10 Modem Troubleshooting 2.10 Modem Troubleshooting To check if modem is malfunctioning or not, fo llow the troubleshooting procedures below as instructed.
2.10 Modem Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL] 2-51 Check 2 Modem cable or MDC cable may be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 MDC may be faulty.
2 Troubleshooting Procedures 2.11 LAN Troubleshooting 2.11 LAN Troubleshooting To check if the computer’s LAN is malfunc tioning or not, follow the troubleshooting procedures below as instructed.
2.12 Wireless LAN Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL] 2-53 2.12 Wireless LAN Troubleshooting To check if the computer’s Wireless LAN is m alfunctioning or not, follow the troubleshooting procedures below as instructed.
2 Troubleshooting Procedures 2.12 Wireless LAN Troubleshooting Procedure 2 Antennas' Connection Check The wireless LAN function-wiri ng diagram is shown below: Any of the connections may be defective.
2.12 Wireless LAN Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL] 2-55 Procedure 3 Replacement Check Wireless LAN card, wireless LAN antenna or system board may be faulty.
2 Troubleshooting Procedures 2.13 Bluetooth Troubleshooting 2-56 [CONFIDENTIAL ] PORTEGE A600 Maintenance Manual (960-710) 2.13 Bluetooth Troubleshooting This section describes how to determ ine if th e computer’s Bluetooth is functioning properly.
2.13 Bluetooth Troubleshooting 2 Troubleshooting Procedures Procedure 2 Connection Check The Bluetooth function wiring diagram is shown below: Any of the connections may be disconnected.
2 Troubleshooting Procedures 2.13 Bluetooth Troubleshooting 2-58 [CONFIDENTIAL ] PORTEGE A600 Maintenance Manual (960-710) Procedure 3 Replacement Check The Bluetooth antenna, Bluetooth module, sound board and system board are connected to the circuits.
2.14 Sound Troubleshooting 2 Troubleshooting Procedures 2.14 Sound Troubleshooting This section describes how to determine if the computer’s sound f unctions are functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required.
2 Troubleshooting Procedures 2.14 Sound Troubleshooting 2-60 [ CONFIDENTIAL] PORTEGE A600 Maintenance Man ual (960-710) As the connection may be defective, disassem ble the computer and check each connection. If the problem still occu rs, go to Procedure 3.
2.15 3G Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL] 2- 61 2.15 3G Troubleshooting This section describes how to determine if the computer’s 3G is functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required.
2 Troubleshooting Procedures 2.15 3G Troubleshooting Procedure 2 Antenna Connection Check The 3G wiring diagram is shown below: Any of the connections may be disconnected.
2.15 3G Troubleshooting 2 Troubleshooting Procedures PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL] 2- 63 Procedure 3 Replacement Check The 3G antenna, 3G card, SIM card, PCIe Mini Card FPC, FSISD*(SD board) and the system board are connected to the ci rcuits.
2 Troubleshooting Procedures 2.16 SD card Slot Troubleshooting 2.16 SD card Slot Troubleshooting This section describes how to determine if the computer's Bridge media functions are functioning properly. Perform the steps below star ting with Procedure 1 and continuing with the other procedures as required.
2.17 Fingerprint sensor Troubleshootin g 2 Troubleshooting Procedures 2.17 Fingerprint sensor Troubleshooting CAUTION : To delete the account for confirming the fingerprint operation, it is necessary to log on by the account with the ma nagement authority.
2 Troubleshooting Procedures 2.17 Fi ngerprint sensor Troubleshooting 2-66 [ CONFIDENTIAL] PORTEGE A600 Maintenance Man ual (960-710) Procedure 1 Setting Windows Log-ON password 1. Open [User Account] from [Control Panel]. 2. Click [User Account]. 3. Click the icon of the account (user’s na me) that you want to set the password.
2.17 Fingerprint sensor Troubleshootin g 2 Troubleshooting Procedures 7. When the Store to Sensor screen is displa yed, check Store fingerpri nt to Sensor. Click Finish to complete fingerprint registration. Procedure 3 Authentication of fingerprint 1.
2 Troubleshooting Procedures 2.17 Fi ngerprint sensor Troubleshooting Procedure 4 Connector Check and Replacement Check The connection of the cable and board may be defective.
2.18 Web camera Troubleshooting 2 Troubleshooting Procedures 2.18 Web camera Troubleshooting To check if the computer’s web camera is ma lfunctioning or not, follow the troubleshooting procedures below as instructed.
2 Troubleshooting Procedures 2.18 Web camera Troubleshooting Check 2 The Web camera m ay be defective or damaged. Replace the drive with a new one. If there is still an error, go to Check 3. Check 3 The USB board may be defective or dam aged. Replace the drive with a new one.
2.19 Intel Turbo Memory Troubleshooting U(No t Used)U 2 Troubleshooting Procedures 2.19 Intel Turbo Memory Troubleshooting (Not Used) To check if Intel Turbo Memory is malf unctioning or not, follow the troubleshooting procedures below as instructed.
2 Troubleshooting Procedures 2.19 Intel Tur bo Memory Troubleshooting U(Not Used)U If any problems are found, perform the Procedure 2. Procedure 2 Connector Check and Replacement Check The connection of Intel Turbo Memory card may be faulty or the card may be defective.
[CONFIDENTIAL] Chapter 3 Tests and Diagnostics.
Tests and Diagnostics 3-ii [CONFIDENTIAL] PORTEGE A600 Mai ntenance Manual (960-710) 3.
Tests and Diagnostics PORTEGE A600 Maintenance Man ual (960-710) [CONFIDENTIAL] 3-iii Chapter 3 Contents 3.1 The Diagnostic Test ................................................................................................... 3-1 3.1.1 Diagnostics menu .
Tests and Diagnostics 3-iv [CONFIDENTIAL] PORTEGE A600 Maintenance M anual (960-710) 3.20 ONLY ONE TEST ................................................................................................... 3-40 3.21.1 Program Description ...............
Tests and Diagnostics PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL] 3-v Tables Table 3-1 Subtest names .................................................................................................... 3-12 Table 3-2 Error codes and error status names .
Tests and Diagnostics 3-vi [CONFIDENTIAL] PORTEGE A600 Maintenance M anual (960-710).
3.1 The Diagnostic Test 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-1 3 3.1 The Diagnostic Test This chapter explains how to use the Diagnostic Test programs to test the functions of the computer’s hardware modules.
3 Tests and Diagnostics 3.1 The Diagnostic Test 3-2 [CONFID ENTIAL] PORTEG E A600 Maintenance Manual (960-710) REAL TIMER TEST NDP TEST EXPANSION TEST CD-ROM/DVD-ROM TEST ERROR RET.
3.1 The Diagnostic Test 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-3 The Diagnostics Disk (Main T&D) 3.1.3 Heatrun test program The heatrun test starts automatically after the selection. You will need the following equipment to perform this program.
3 Tests and Diagnostics 3.2 Executing the Diagnostic Test 3.2 Executing the Diagnostic Test To start the Repair test program, follow these steps: 1. Insert the Repair test program disk in the USB floppy disk drive or Optical disk drive. 2. Turn on the computer while pressing U key.
3.2 Executing the Diagnostic Test 3 Tests and Diagnostics 3.2.1 Diagnostics menu (T&D) Set the highlight bar to 3 , and press Enter . The following DIAGNOSTIC TEST MENU will appear: TOSHIBA personal computer XXXXXX DIAGNOSTICS version X.XX (c) copyright TOSHIBA Corp.
3 Tests and Diagnostics 3.2 Executing the Diagnostic Test Set the highlight bar to 1 , and press Enter . The following DIAGNOSTIC TEST MENU will appear: TOSHIBA personal computer XXXXXX DIAGNOSTICS version X.
3.2 Executing the Diagnostic Test 3 Tests and Diagnostics Select the option you want to execute and press Enter . When you select 1- SYSTEM TEST , the following message will appear: SYSTEM TEST NAME XXXXXX xxxxxxx DIAGNOSTIC TEST VX.
3 Tests and Diagnostics 3.2 Executing the Diagnostic Test 3-8 [CONFID ENTIAL] PORTEG E A600 Maintenance Manual (960-710) Use the up and down arrow keys to move the cursor to “ ERROR STOP ”. Use the right and left arrow keys to move the cursor to the desired option and press Enter .
3.3 Setting of the hardware configuration 3 Tests and Diagnostics 3.3 Setting of the hardware configuration To execute this program, input 1 in the startup menu. Then press Enter to select the (2)- Initial config set . The H/W initial inform ation setting tool consists of four subtests.
3 Tests and Diagnostics 3.3 Setting of the hardware configuration 3-10 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) 7. “Create DMIINFO TXT (Y/N)?” is displayed. Press Y, then the DMI information (text data) is written to the Floppy disk, etc.
3.4 Heatrun Test 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-11 3.4 Heatrun Test To execute this program, press 2 , Repair Heatrun and press Enter in the startup menu, press Enter . After selecting this test, the same subtests as 3.
3 Tests and Diagnostics 3.5 Subtest Names 3-12 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) 3.5 Subtest Names Table 3-1 lists the subtest names for each test program in the DIAGNOSTIC TEST MENU. Table 3-1 Subtest names (1/2) No. Test Name Subtest No.
3.5 Subtest Names 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-13 Table 3-1 Subtest names (2/2) No. Test Name Subtest No.
3 Tests and Diagnostics 3.6 System Test 3-14 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) 3.6 System Test To execute the System Test select 1 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter .
3.6 System Test 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-15 If the CPU supports Gerserville (SpeedStep), this Subtest checks that the CPU operating clock speed can be changed. If the CPU does not support Gerserville (SpeedStep), the following message is displayed and the test is ended.
3 Tests and Diagnostics 3.7 Memory Test 3-16 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) 3.7 Memory Test To execute the Memory Test, select 2 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter .
3.8 Keyboard Test 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-17 3.8 Keyboard Test To execute the Keyboard Test, select 3 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter .
3 Tests and Diagnostics 3.9 Display Test 3.9 Display Test To execute the Display Test, select 4 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter .
3.9 Display Test 3 Tests and Diagnostics Subtest 04 Gradation & Mode test for VGA This subtest displays gradations for following modes. To change the mode, press Enter .
3 Tests and Diagnostics 3.9 Display Test 3-20 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) Subtest 06 “H” Pattern Display This subtest displays a full screen of “H” patterns.
3.10 Floppy Disk Test 3 Tests and Diagnostics 3.10 Floppy Disk Test CAUTION : Before running the floppy disk test, prepare a formatted work disk. Remove the Diagnostics Disk and insert the work disk into the FDD. The contents of the floppy disk will be erased.
3 Tests and Diagnostics 3.10 Floppy Disk Test 3-22 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) Select the number of the subtest you want to execute and press Enter . The following message will appear during the floppy disk test. FLOPPY DISK IN PROGRESS XXXXXXX xxx DIAGNOSTIC TEST VX.
3.11 Printer Test 3 Tests and Diagnostics 3.11 Printer Test CAUTION : Printer Test is not supported for this model. To execute the Printer Test, select 6 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. NOTE : An IBM compatible printer must be connected to the system to execute this test.
3 Tests and Diagnostics 3.11 Printer Test Subtest 02 Function This subtest is for IBM compatible printers, and tests the following f unctions: Normal print Double-width print Compressed print Emphasiz.
3.12 Async Test 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-25 3.12 Async Test CAUTION : Printer Test is not supported for this model. To execute the Async Test, select 7 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions displayed on the screen.
3 Tests and Diagnostics 3.13 Hard Disk Test 3.13 Hard Disk Test To execute the Hard Disk Test, select 8 from the DIAGNOSTIC TEST MENU, press Enter , and follow the directions on the screen. CAUTION : The contents of the hard disk will be erased when subtest 02, 03, 04, 06, 08 or 09 is executed.
3.13 Hard Disk Test 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-27 4. The Hard Disk Test message will appear after you respond to the Detail Status prompt. Select the number of the subtest you want to execute and press Enter .
3 Tests and Diagnostics 3.13 Hard Disk Test 3-28 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) Subtest 04 Cross talk & peak shift This subtest writes eight types of worst pattern data (listed below) to a cylinder, then reads the data while moving from cylinder to cylinder.
3.14 Real Timer Test 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-29 3.14 Real Timer Test To execute the Real Timer Test, select 9 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen.
3 Tests and Diagnostics 3.14 Real Timer Test 3-30 [CONFIDE NTIAL] PORTEGE A600 Maintenance Manual (960-710) Subtest 03 Real time carry CAUTION : When this subtest is executed, the current date and time are erased.
3.15 NDP Test 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-31 3.15 NDP Test To execute the NDP test, select 10 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen. CAUTION: Judge the existence of high-speed operation processor by 1bit of the composition byte.
3 Tests and Diagnostics 3.16 Expansion Test 3-32 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) 3.16 Expansion Test To execute the expansion test, select 11 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen.
3.16 Expansion Test 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-33 Subtest 02 RGB monitor ID NOTE: To execute this subtest, monitor supporting EDID (Extended Display Identification Data) is required. Connect a wraparound connector to CRT monitor for the test of ID acquisition.
3 Tests and Diagnostics 3.17 CD-ROM/DVD-ROM Test 3-34 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) 3.17 CD-ROM/DVD-ROM Test To execute the CD-ROM/DVD-ROM test, select 12 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen.
3.18 Error Code and Error Status Names 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-35 3.18 Error Code and Error Status Names Table 3-2 lists the error codes and error status names for the Diagnostic Test.
3 Tests and Diagnostics 3.18 Error Code and Error Status Names 3-36 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) Table 3-2 Error codes and error status names (2/3) Device name Error code E.
3.18 Error Code and Error Status Names 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-37 Table 3-2 Error codes and error status names (3/3) Device name Error code E.
3 Tests and Diagnostics 3.19 Hard Disk Test Detail Status 3-38 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) 3.19 Hard Disk Test Detail Status When an error occurs in the hard disk test, th.
3.19 Hard Disk Test Detail Status 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-39 Tables 3-4 HDC Error register contents Bit Name Description 7 BBK (Bad block mark) “0” … Not used “1” … A bad block mark is detected.
3 Tests and Diagnostics 3.20 ONLY ONE TEST 3-40 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) 3.20 ONLY ONE TEST 3.20.1 Program Description This program tests the unique functions of this model. 3.20.2 Operations Select test 2 from the DIAGNOSTIC MENU and press Enter .
3.20 ONLY ONE TEST 3 Tests and Diagnostics Subtest 01 Pressed Key Display When you execute this subtest, the keyboard layout is drawn on the display as shown below. When any key is pressed, the corresponding key on the screen changes to the key character that was pressed.
3 Tests and Diagnostics 3.20 ONLY ONE TEST Subtest 02 Touch Pad This subtest checks the functions of the touch pad as shown below. A) Direction and parameter B) Switching function check. This test displays the response from the touch pad and touch pad switch.
3.20 ONLY ONE TEST 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-43 Subtest 03 Wireless communication Switch This subtest checks if the Wireless comm unication switch works properly. If the test is started with the switch ON, following message appears in the display.
3 Tests and Diagnostics 3.20 ONLY ONE TEST 3-44 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) Press 9 and Enter to return to ONLY ONE TEST menu. Subtest 05 LED This subtest checks if each LED lights properly. The following m essage appears in the display in order.
3.20 ONLY ONE TEST 3 Tests and Diagnostics Subtest 06 Button This subtest checks the m oving of the of the front operation panel button. Press the Toshiba Assist button and Back light On/Off button after the following message appears. Step 1 X 1 2 * * *.
3 Tests and Diagnostics 3.20 ONLY ONE TEST 3-46 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) The following message appears in the display. * < ------ Volume Down * -------- > Volume Up! Step5 Volume dial is turned to the left. OK message appears in the display if the test ends without an error.
3.20 ONLY ONE TEST 3 Tests and Diagnostics Subtest 7 Acceleration sensor This subtest detects and corrects the each axis (X, Y, Z). NOTE: Make sure that this subtest is executed on the following condition: 1. Flat desk with vertical plane to get the stability of machine.
3 Tests and Diagnostics 3.20 ONLY ONE TEST 3-48 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) When this subtest is selected, the following message appears in the display. The heaven surface establishes in the upper direction Press [Enter] key NOTE : Be sure to execute the test with the display panel opened.
3.20 ONLY ONE TEST 3 Tests and Diagnostics Rev B Subtest 8 Docker Dock/Undock This subtest is executed with an Slim Port Replicator II. installed. Press Enter while pushing the eject button of the Slim Port Replicator II. the following message appears.
3 Tests and Diagnostics 3.20 ONLY ONE TEST 3-50 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) Subtest A E2PROM (MAC/GUID) It checks whether the MAC address, GUID of IEEE1394 information are written. Subtest B Intel AMT It checks whether the Intel AMT corde versions information are written.
3.21 Head Cleaning 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-51 3.21 Head Cleaning 3.21.1 Function Description This function cleans the heads in the FDD by executing a series of head load/seek and read operations.
3 Tests and Diagnostics 3.22 Log Utilities 3.22 Log Utilities 3.22.1 Function Description This function logs error information generated while a test is in progress and stores the results in RAM. This function can store data on a floppy disk or output the data to a printer.
3.22 Log Utilities 3 Tests and Diagnostics 3.22.2 Operations 1. Select 5 and press Enter in the DIAGNOSTIC MENU, logs error information into RAM or onto a floppy disk.
3 Tests and Diagnostics 3.23 Running Test 3-54 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) 3.23 Running Test 3.23.1 Function Description This function automatically executes the following tests in sequence: 1. System test (subtest 01) 2. Memory test (subtests 01, 02) 3.
3.24 Floppy Disk Drive Utilities 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-55 3.24 Floppy Disk Drive Utilities 3.24.1 Function Description This function formats the FDD, copies the floppy disk and displays the dump list for both the FDD and HDD.
3 Tests and Diagnostics 3.24 Floppy Disk Drive Utilities 3-56 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) 3.24.2 Operations 1. Selecting 7 from the DIAGNOSTIC MENU and pressing Enter displays the following message: [ FDD UTILITIES ] 1 - FORMAT 2 - COPY 3 - DUMP 4 – HDD-ID READ 9 - EXIT TO DIAGNOSTICS MENU 2.
3.24 Floppy Disk Drive Utilities 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-57 3. COPY program (a) When COPY is selected, the following message appears: FLOPPY DISK FORMAT & COPY : VX.
3 Tests and Diagnostics 3.24 Floppy Disk Drive Utilities 3-58 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) 4. DUMP program (a) When DUMP is selected, the following message appears: DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XX Drive type select (1:FDD, 2:HDD) ? (b) Select a drive type.
3.24 Floppy Disk Drive Utilities 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-59 (k) The following message will appear. To finish the dum p, select 3 . Press number key (1:up,2:down,3:end) ? (l) The following message will appear.
3 Tests and Diagnostics 3.25 System Configuration 3-60 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) 3.25 System Configuration 3.25.1 Function Description The System Configuration program contains th e following configuration information for the computer: 1.
3.25 System Configuration 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-61 3.25.2 Operations Select 8 from the DIAGNOSTIC MENU and press Enter. Then, the following system configuration appears in the display. System Configuration Display: Ver X.
3 Tests and Diagnostics 3.26 Wireless LAN Test Program (Atheros) 3.26 Wireless LAN Test Program (Atheros) Since there is no test program for Atheros-made wireless LAN cards, check the wireless LAN card type of the computer and the antenna connection by using Windows program s.
3.26 Wireless LAN Test Program (Atheros) 3 Tests and D iagnostics Check of the antenna connection 1. Confirm that the icon for wireless LAN appears at the lower right of the screen under the circumstances the wireless LAN comm unication is available. (It is no problem if a cross is shown on the icon.
3 Tests and Diagnostics 3.27 Wireless LAN Test Program (Intel-made a/b/g/n Setting up of REF PC) 3.27 Wireless LAN Test Program (Intel-made a/b/g/n Setting up of REF PC) For the test of Intel-made wireless LAN cards , configure the test environm ent as shown below with the following equipment.
3.27 Wireless LAN Test Program (Intel-made a/b/g/n Setting up of REF PC) 3 Tests and Diagnostics Open “My Computer” window and click “My Network places” on the left column. Click “View network connections” on the left column. PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-65 • The “Network Connections” window appears.
3 Tests and Diagnostics 3.27 Wireless LAN Test Program (Intel-made a/b/g/n Setting up of REF PC) Click “Install…” button on the “Local Area Connection Properties” window. • Local Area Connection Properties window Select “Protocol” on the “Select Network Component Type” window and click “Add…” button.
3.27 Wireless LAN Test Program (Intel-made a/b/g/n Setting up of REF PC) 3 Tests and Diagnostics When “Install From Disk” window appears, click “Browse…” and specify the created “Clx_Res” folder. Then Click “OK”. (For the test, “PACKET.
3 Tests and Diagnostics 3.27 Wireless LAN Test Program (Intel-made a/b/g/n Setting up of REF PC) After the completion of REF PC setup, restart the WINDOW S. Then perform the Responder test program for Windows (W TWINSVR.EXE) in the Clx_Res folder. ・ WTWINSVR.
3.28 Wireless LAN Test Program on DUT PC ( Intel-made) 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-69 3.28 Wireless LAN Test Program on DUT PC (Intel-made) 3.
3 Tests and Diagnostics 3.28 Wireless LAN Test Program on DUT PC ( Intel-made) 3-70 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) To execute the subtest, input the subtest number and press Enter . Subtest01 Communication test of 11a mode for 5100/5150 module (Two antenna type) This subtest execute transmitting/receiving test in 802.
3.28 Wireless LAN Test Program on DUT PC ( Intel-made) 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-71 Subtest03 Communication test of 11g mode for 5100/5150 module (Two antenna type) This subtest execute transmitting/receiving test in 802.
3 Tests and Diagnostics 3.28 Wireless LAN Test Program on DUT PC ( Intel-made) 3-72 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) Subtest06 Communication test of 11b mode for 5100/5150 module (Three antenna type) This subtest execute transmitting/receiving test in 802.
3.29 LAN/Modem/Bluetooth/IEEE1394 Test Program 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-73 3.29 LAN/Modem/Bluetooth/IEEE1394 Test Program This section describes how to perform the LAN/Modem/Bluetooth/IEEE1394 test with the test program.
3 Tests and Diagnostics 3.29 LAN/Modem/Bluetooth/IEEE1394 Test Program Subtest01 (i82562 + ICHx) This subtest checks the operation of mini-PCI I/F by the loopback test in the chip.
3.29 LAN/Modem/Bluetooth/IEEE1394 Test Program 3 Tests and Diagnostics Subtest02 (GbE) This subtest checks the operation of mini-PCI I/F by the loopback test in the chip. Select 2 to execute and press Enter . The following message will appear: Testing adaptor.
3 Tests and Diagnostics 3.29 LAN/Modem/Bluetooth/IEEE1394 Test Program 3-76 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) 3.29.2 Modem test For this subtest, connect the modem PCB and RJ11 connector with a harness. Use the dedicated “FAT-MODE inspection device (product code: QE2000P01 made by Nitto Denki Seisakusyo)” for the tests.
3.29 LAN/Modem/Bluetooth/IEEE1394 Test Program 3 Tests and Diagnostics 3.29.3 Bluetooth test Preparation ・ For the test of Bluetooth function, use the Windows program installed on the target computer (computer to be tested). A responder device (device for transm itting/receiving data) is also needed.
3 Tests and Diagnostics 3.29 LAN/Modem/Bluetooth/IEEE1394 Test Program 5. Select “Diagnostics” tab and click “Run”. 6. Check the “Log” to confirm the test result.
3.29 LAN/Modem/Bluetooth/IEEE1394 Test Program 3 Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-79 3.29.4 IEEE1394 test To execute this test, input 4 and press Enter . NOTE: Use another computer that can communicate by IEEE1394 (i.
Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-80 3.30 Sound Test program Sound TEST disk cannot be used in PORTEGE A600. Therefore, please test the sound on Windows OS. 1) Play a music file. 2) click TOSHIBA-> utility -> "PC diagnostic tool.
Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-81 3.32 SETUP 3.32.1 Function Description This program displays the current system setup inform ation as listed below: 1. Memory 2. System Date/Time 4. Password (a) User Password (b) Supervisor Password 3.
Tests and Diagnostics 3-82 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) 9. Drives I/O (a) Built-in HDD (b) ODD (c) eSATA (d) SATA Controller Mode 10. PCI Bus 11. Display (a) LCD Display Stretch 12. Peripheral (a) Internal Pointing Device (b) Web Camera 13.
Tests and Diagnostics 3.32.2 Accessing the SETUP Program While pressing ESC , turn on the power. Then press F1 . The following display appears. PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL].
Tests and Diagnostics 3-84 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710).
Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-85 Moving Within the SETUP Menu and Changing Values 1. Press Å and Æ to move between the two columns. Press ↑ and ↓ to m ove between items in a column. Press Fn + ↑ ( PgUp) and Fn + ↓ ( PgDn) to move between the two pages.
Tests and Diagnostics 3-86 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) SETUP Options The SETUP screen is divided into 14 functionally related groups. This section describes each group and its options. 1. Memory This group of options displays the computer’s mem ory.
Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-87 (b) HDD Password Mode This item registers HDD password and can be selected only for registering HDD password. To change HDD Password Mode when HDD password is registered, delete the registered HDD pa ssword first, and then register new password.
Tests and Diagnostics 3-88 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) NOTE : CD-ROM refers to a DVD Super Multi drive. (b) HDD Priority Use this option to set the booting priority from HDD or USB (USB Memory stick). Built-in HDD → USB (Default) USB → Built-in HDD 6.
Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-89 (c) Execute-Disable Bit Capability This option set the Execute-Disable Bit function of CPU to the operation system. Execute-Disable Bit gives higher security function preventing the PC from the computer viruses and buffer overflow problem on unauthorized access.
Tests and Diagnostics (f) Auto Power On Use this option to set a time and date for automatic power on and enable or disable the ring indicator feature. Alarm Date Option appears only when Alarm Time is enabled. Set the parameters for the Auto Power On (automatic power on) function and the Wake-up on LAN in the “OPTIONS” window.
Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-91 Critical Battery Wake-up Configures what action is taken when the remaining battery power is close to running out while the system is in Sleep Mode. This setting is only available when the Critical battery action in Windows is set to Hibernate (Default).
Tests and Diagnostics 7. Configuration This option lets you set the device configuration. All Devices BIOS sets all devices. Setup by OS Initializes devices, which is needed to load an operating system. Operating system initializes other devices. (Default) NOTE: 1.
Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-93 Processing Speed This feature changes the CPU processing speed. High CPU operates at high speed. (Default in Full Power Mode) Low CPU operates at low speed. (Default in Low Power Mode) CPU Sleep Mode Use this option to enable or disable the CPU sleep function.
Tests and Diagnostics 3-94 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) (b) PCI Express Link ASPM This option set the power-saving function of PCI Express on the following conditions. A u t o PCI Express devices are not used while battery operation.
Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-95 (d) SATA Controller Mode This feature sets the SATA Controller Mode. AHCI Sets AHCI which is the mode for VistaTM (default) Compatibility Sets the mode for legacy OS. Use this mode when the driver corresponding to AHCI is not used.
Tests and Diagnostics 3-96 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) (b) Web Camera This option enables or disables the Web Camera Enabled Enables the Web Camera (Default) Disabled Disables the Web Camera 13.
Tests and Diagnostics PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] 3-97 (b) Wireless LAN Enabled Enables Wireless LAN functions. (Default) Disabled Disables Wireless LAN functions. 15. Security Controller (a) TPM Disables the security controller called TPM (Trusted Platform Module).
Tests and Diagnostics 3-98 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) 16. Intel( R )AMT *AMT model only (a) MEBx SETUP This setting enables or disables the computer's MEBx SETUP Intel(R) AMT. Enabled Enables the MEBx SETUP. Disabled Disables the MEBx SETUP.
Chapter 4 Replacement Procedures [CONFIDENTIAL].
4 Replacement Procedures 4-ii [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710).
4 Replacement Procedures PORTÉGÉ A600 Maintenance Manual (960-710) [ CONFIDENTIAL] 4-iii Chapter 4 Contents 4.1 Overview ................................................................................................................... .4 - 1 4.2 Battery pack .
4 Replacement Procedures 4-iv [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710) Figures Figure 4-1 Removing the battery pack .......................................................................... 4-10 Figure 4-2 Removing the SIM card ....
4 Replacement Procedures PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-v Figure 4-31 Removing the speaker .................................................................................. 4-55 Figure 4-32 Removing the cover assembly/LCD assem bly (1).
4 Replacement Procedures 4-vi [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710).
4.1 Overview 4 Replacement Procedures 4 Replaceme nt Procedur es 4.1 Overview CAUTION: The case and parts of this machine are delicate (thin) because this machine is lighter than a usual machine. Handle with care of installing/removing. This chapter describes the procedure for removing and replacing the field replaceable units (FRUs) in the PC.
4 Replacement Procedures 4.1 Overview 4-2 [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710) Please prepare required parts in advance, when replacing the following items.
4.1 Overview 4 Replacement Procedures PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-3 The main parts in this manual are indicated in the part list by the f ollowing names.
4 Replacement Procedures 4.1 Overview 4-4 [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710) Safety Precautions Please read the following safety instructions before disassembling the computer and always follow the instructions while working on the computer.
4.1 Overview 4 Replacement Procedures PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-5 Before You Begin Take note of the following points before starti ng work. Always remove the AC adapter and battery pack before commencing any of the procedures.
4 Replacement Procedures 4.1 Overview Disassembly Procedures Four main types of cable connector are used. Pressure plate connector • • • • Spring connector Back flip connector Normal pin conne.
4.1 Overview 4 Replacement Procedures PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-7 Assembly Procedures After the computer has been disassembled and the part that caused the fault has been repaired or replaced, the computer must be reassem bled.
4 Replacement Procedures 4.1 Overview Screw Tightening Torque When you fasten screws, be sure to follow the torque list below. CAUTION: Overtightening can damage components and screws; undertightening can result in electrical shorts or other damage if screws or components come loose.
4.1 Overview 4 Replacement Procedures Grip Color Some screws have a colored grip area to help you determine the length of the screw. [Normal grip] • Even numbered length screws: Brown • Odd number.
4 Replacement Procedures 4.2 Battery pack 4.2 Battery pack Removing the Battery pack To remove the battery pack, follow the steps below and refer to Figure 4-1. CAUTION: When handling battery pack, be careful not to short circuit the terminals. Also do not drop, hit or apply impact, do not scratch, break, twist or bend the battery pack.
4.2 Battery pack 4 Replacement Procedures PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-11 Installing the Battery pack To install the battery pack, follow the steps below and refer to Figure 4-1. CAUTION: The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of.
4 Replacement Procedures 4.3 SIM card 4.3 SIM card Removing the SIM card To remove the SIM card, follow the steps below and refer to Figure 4-2. 1. Release the hook . 2. Push the SIM card . It will pop out partly when you release, so pull out the card.
4.4 ExpressCard 4 Replacement Procedures 4.4 ExpressCard Removing the ExpressCard To remove the ExpressCard, follow the steps below and refer to Figure 4-3. CAUTION: Before you remove the ExpressCard, refer to the card’s documentation and to your operating system documentation for proper procedures and precautions.
4 Replacement Procedures 4.5 SD/SDHC memory card 4.5 SD/SDHC memory card Removing the SD/SDHC memory card To remove the SD/SDHC mem ory card, follow the steps below and refer to Figure 4-4.
4.6 Memory module 4 Replacement Procedures 4.6 Memory module Removing the Memory module To remove the mem ory module, confirm that the com puter is shut down. Then follow the steps below and refer to Figure 4-5 and 4-6. CAUTION: When removing the memory module, make sure the computer is powered off.
4 Replacement Procedures 4.6 Memory module 3. Open the left and right latches outside and remove the memory module . Latch Memory module Latch Figure 4-6 Removing the memory module 4-16 [CONFIDENTIAL].
4.6 Memory module 4 Replacement Procedures PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-17 Installing the Memory module To install the memory m odule, confirm that the computer is shut down. Then follow the steps below and refer to Figure 4-5 and 4-6.
4 Replacement Procedures 4.7 Base assembly 4.7 Base assembly Removing the Base assembly To remove the base assembly, follow the steps below and refer to Figure 4-7.
4.7 Base assembly 4 Replacement Procedures PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-19 Installing the Base assembly To install the base assembly, follow the steps below and refer to Figure 4-7. 1. Set the base assembly to the cover assembly.
4 Replacement Procedures 4.8 Battery lock 4.8 Battery lock Removing the Battery lock To remove the battery lock, follow the steps below and refer to Figure 4-8. 1. Remove the battery locks while pushing hooks inside to release them. CAUTION : When removing the battery lock L, be careful not to lose the SPG battery lock.
4.9 Wireless LAN card 4 Replacement Procedures 4.9 Wireless LAN card Removing the Wireless LAN card To remove the wireless LAN card, follow the steps below and refer to Figure 4-9. 1. Turn up the insulator and disconnect three (or two) wireless LAN antenna cables from the connectors on the wireless LAN card.
4 Replacement Procedures 4.9 Wireless LAN card 4-22 [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710) Installing the Wireless LAN card To install the wireless LAN card, follow the steps below and refer to Figure 4-9. 1. Insert the wireless LAN card to the connector on the system board slantwise and press it to connect firmly.
4.10 SD board 4 Replacement Procedures 4.10 SD board Removing the SD board To remove the SD board, follow the steps below and refer to Figure 4-10. 1. Remove the following screws and lift up the SD bo.
4 Replacement Procedures 4.10 SD board 4-24 [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710) Installing the SD board To install the SD board, follow the steps below and refer to Figure 4-10. 1. Connect the SD board FPC to the connector CN9710 on the back of the SD board.
4.11 Bluetooth module 4 Replacement Procedures 4.11 Bluetooth module Removing the Bluetooth module To remove the Bluetooth module, follow the steps below and refer to Figure 4-11. 1. Remove the following screw and lift up the Bluetooth module . • M2 × 3B S-THIN HEAD × 1 2.
4 Replacement Procedures 4.11 Bluetooth module 4-26 [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710) Installing the Bluetooth module To install the Bluetooth module, follow the steps below and refer to Figure 4-11. 1. Connect the Bluetooth antenna cable and Bluetooth FFC to the connectors on the back of the Bluetooth module.
4.12 Optical disk drive (DVD-Super Multi drive)/MDC modem 4 Replacement Procedures 4.12 Optical disk drive (DVD-Super Multi drive)/MDC modem Removing the Optical disk drive/MDC modem To remove the optical disk drive/MDC modem , follow the steps below and refer to Figure 4- 12 to 4-16.
4 Replacement Procedures 4.12 Optical disk drive (DVD-Super Multi drive)/MDC modem 3. Remove the following screws and SD holder . • M2 × 4C BIND × 2 M2x4C BIND SD holder Figure 4-13 Removing the optical disk drive (2) 4. Remove the following screws , ODD FPC , ODD rear plate and ODD side plate .
4.12 Optical disk drive (DVD-Super Multi drive)/MDC modem 4 Replacement Procedures 5. Remove the following screws securing the MDC m odem. • M2 × 4 C B I N D × 2 6. Turn up the insulator and take out the RJ11 harness from the slot. 7. Disconnect the MDC modem from the connector on the MDC FPC.
4 Replacement Procedures 4.12 Optical disk drive (DVD-Super Multi drive)/MDC modem 10. Remove the following screw s and ODD upper . • M2 × 4 C B I N D × 2 M2x4C BIND ODD upper Figure 4-16 Removing.
4.12 Optical disk drive (DVD-Super Multi drive)/MDC modem 4 Replacement Procedures PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-31 Installing the optical disk drive/MDC modem To install the optical disk drive/MDC modem, follow the steps below and refer to Figure 4- 12 to 4-16.
4 Replacement Procedures 4.13 3G card 4.13 3G card Removing the 3G card To remove the 3G card, follow the steps below and refer to Figure 4-17. 1. Disconnect two 3G antenna cables from the connectors on the 3G card. 2. Remove the following screws and disconnect the 3G card from the connector on the 3G FPC.
4.13 3G card 4 Replacement Procedures PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-33 Installing the 3G card To install the 3G card, follow the steps below and refer to Figure 4-17. 1. Connect the 3G FPC to the connector CN2750 on the system board and secure it with following screws .
4 Replacement Procedures 4.14 ExpressCard slot 4.14 ExpressCard slot Removing the ExpressCard slot To remove the ExpressCard slot, follow the steps below and refer to Figure 4-18. 1. Remove the following screws securing the ExpressCard slot. • M2 × 4C BIND screw × 4 2.
4.14 ExpressCard slot 4 Replacement Procedures PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-35 Installing the ExpressCard slot To install the ExpressCard slot, follow the steps below and refer to Figure 4-18. 1. Stick the insulator . 2.
4 Replacement Procedures 4.15 HDD/SSD 4.15 HDD/SSD CAUTION : Take care not to press on the top or bottom of the HDD or SSD. Pressure may cause data loss or damage to the device.
4.15 HDD/SSD 4 Replacement Procedures 4.15.1 HDD Removing the HDD To remove the HDD, follow the steps below and refer to Figure 4-19. 1. Lift up the HDD from the slot.
4 Replacement Procedures 4.15 HDD/SSD 4.15.2 SSD Removing the SSD To remove the SSD, follow the steps below and refer to Figure 4-20. 1. Remove the following screws securing the SSD . • M1.4 × 3B S-THIN HEAD × 4 2. Disconnect the SSD from the connector on the SSD FPC .
4.15 HDD/SSD 4 Replacement Procedures PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-39 Installing the SSD To install the SSD, follow the steps below and refer to Figure 4-20. 1. Connect the SSD to the connector on the SSD FPC . 2. Set the SSD into the guides of the slot and secure it with the following screws .
4 Replacement Procedures 4.16 RTC battery 4 Replaceme nt Procedur es 4.16 RTC battery CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the laws and ordinances of your local authority. Removing the RTC battery To remove the RTC battery, follow the steps below and refer to Figure 4-21.
4.16 RTC battery 4 Replacement Procedures PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-41 Installing the RTC battery To install the RTC battery, follow the steps below and refer to Figure 4-21.
4 Replacement Procedures 4.17 Sound board/MIC harness 4.17 Sound board/MIC harness Removing the Sound board/MIC harness To remove the sound board/MIC harness, follow the steps below and refer to Figure 4-22 and Figure 4-23. 1. Remove the following screw securing the sound board.
4.17 Sound board/MIC harness 4 Replacement Procedures 3. Disconnect the MIC harness from the connector CN6050 on the sound board and remove the MIC harness from the sound board.
4 Replacement Procedures 4.18 Cooling module 4.18 Cooling module Removing the Cooling module To remove the cooling module, follow the steps below and refer to Figure 4-24. CAUTION: The CPU can become very hot during operation. Be sure to let it cool before starting repair work.
4.18 Cooling module 4 Replacement Procedures Installing the Cooling module To install the cooling module, follow the steps below and refer to Figure 4-24. 1. Wipe off the grease from the cool sheet. 2. Apply new grease on the CPU using a special syringe.
4 Replacement Procedures 4.19 DC-IN harness 4.19 DC-IN harness Removing the DC-IN harness To remove the DC-IN harness, follow the steps below and refer to Figure 4-25. 1. Disconnect the DC-IN harness from the connector CN8800 on the system board and remove the DC-IN harness from the slot.
4.20 USB board/WL SW holder 4 Replacement Procedures 4.20 USB board/WL SW holder Removing the USB board/WL SW holder To remove the USB board/WL SW holder, follow the steps below and refer to Figure 4-26 to 4-28. 1. Open the insulators and release the cables.
4 Replacement Procedures 4.20 USB board/WL SW holder 2. Open the insulator and take out the RJ45 wire harness from the slot. 3. Disconnect the USB board FPC from the connector CN9610 on the USB board. 4. Open the insulator and disconnect the sensor harness from the connector CN9540 on the USB board and connector CN9630 on the SW board.
4.20 USB board/WL SW holder 4 Replacement Procedures 7. Remove the WL SW holder adhered with the double-sided tape. WL SW holder Figure 4-28 Removing the USB board/WL SW holder (3) PORTÉGÉ A600 Main.
4 Replacement Procedures 4.20 USB board/WL SW holder Installing the USB board/WL SW holder To install the USB board/WL SW holder, follow the steps below and refer to Figure 4-26 to 4-28. 1. Set the WL SW holder in place and fix it with the double-sided tape.
4.21 System board 4 Replacement Procedures 4.21 System board CAUTION: When replacing with a new system board, the following procedures must be executed.
4 Replacement Procedures 4.21 System board Removing the System board To remove the system board, follow the steps below and refer to Figure 4-29 and 4-30. 1. Remove the following screws securing the system board. • M2 × 4C BIND × 1 • M3 × 5C BIND × 2 2.
4.21 System board 4 Replacement Procedures 4. Disconnect the HDD FPC (or SSD FPC ), USB board FPC , RJ45 wire harness , sound board FPC , Bluetooth FFC and MDC FPC from the connectors CN1900 , CN9600 , CN4100 , CN9500 , CN4400 and CN3010 on the system board.
4 Replacement Procedures 4.21 System board 4-54 [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710) Installing the System board To install the system board, follow the steps below and refer to Figure 4-29 and 4-30.
4.22 Speaker 4 Replacement Procedures 4.22 Speaker Removing the Speaker To remove the speaker, follow the steps below and refer to Figure 4-31. 1. Take out the speaker from the slot. 2. Peel off the acetate tape . 3. Open the insulators and remove the speaker harness .
4 Replacement Procedures 4.22 Speaker 4-56 [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710) To install the speaker, follow the steps below and refer to Figure 4-31. 1. Set the speaker to the slot. 2. Open the insulators and arrange the speaker harness in place.
4.23 Cover assembly/LCD assembly 4 Replacement Procedures 4.23 Cover assembly/LCD assembly Removing the Cover assembly/LCD assembly To remove the cover assembly/LCD assem bly, follow the steps below and refer to Figure 4- 32 to 4-34. 1. Open the insulators and release the antenna cables.
4 Replacement Procedures 4.23 Cover assembly/LCD assembly 2. Open the display at the angle of 90 degrees and put the computer on the stand. 3. Remove the following screws and separate the cover assembly and LCD assembly .
4.23 Cover assembly/LCD assembly 4 Replacement Procedures 4. Remove the SW board from the cover assem bly. SW board Hook Figure 4-34 Removing the SW board PORTÉGÉ A600 Maintenance Manual (960-710) [.
4 Replacement Procedures 4.23 Cover assembly/LCD assembly Installing the Cover assembly/LCD assembly To install the cover assembly/LCD assembly, follow the steps below and refer to Figure 4-32 to 4-34. 1. Set the SW board to the cover assembly. 2. Set the LCD assembly to the cover assembly and secure them with following screw s .
4.23 Cover assembly/LCD assembly 4 Replacement Procedures 3. Arrange the antenna cables in place and fix them with the insulators . CAUTION : Arrange the antenna cables at the lower left portion as shown in the figure below. Do not put the cables on the rib.
4 Replacement Procedures 4.24 Touch pad/Fingerprint sensor board 4.24 Touch pad/Fingerprint sensor board Removing the Touch pad/Fingerprint sensor board To remove the touch pad/fingerprint sensor boa rd, follow the steps below and refer to Figure 4-35 and 4-36.
4.24 Touch pad/Fingerprint sensor board 4 Replacement Procedures 5. Peel off the membrane switch adhered with the double-sided tape and remove the tip point of the FPC (connector terminal side) from the hole. 6. Remove the following screw and fingerprint sensor board adhered with the double- sided tape.
4 Replacement Procedures 4.24 Touch pad/Fingerprint sensor board Installing the Touch pad/Fingerprint sensor board To install the touch pad/fingerprint sensor boa rd, follow the steps below and refer to Figure 4-35 and 4-36. 1. Wipe off the double-sided tapes on the cover assembly and TPD BTN cover and stick a new double-sided tape on them.
4.25 Keyboard 4 Replacement Procedures 4.25 Keyboard Removing the Keyboard To remove the keyboard, follow the steps below and refer to Figure 4-37. 1. Remove the aluminum tape from the back of the cover assem bly. 2. Turn the cover assembly face up and peel off the keyboard adhered to the insulator.
4 Replacement Procedures 4.25 Keyboard 4-66 [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710) Installing the Keyboard To install the keyboard, follow the steps below and refer to Figure 4-37. NOTE: Do not reuse the removed keyboard and insulator.
4.26 LCD 4 Replacement Procedures 4.26 LCD Removing the LCD To remove the LCD, follow the steps below and refer to Figure 4-38 and 4-39. 1. Peel off three LCD cushions and one LCD mask seal from the LCD mask. 2. Remove the following screws and LCD mask .
4 Replacement Procedures 4.26 LCD 3. Turn up the insulator and remove the LCD from the LCD cover. 4. Peel the insulator (HNS CONN INSULATOR) and disconnect the LCD harness from the connector on the LCD. CAUTION : When disconnecting the LCD harness from the LCD unit, peel off the adhered portion of the LCD harness very carefully.
4.26 LCD 4 Replacement Procedures Installing the LCD To install the LCD, follow the steps below and refer to Figure 4-38 and 4-39. NOTE: When installing a new LCD harness, stick a new square cushion to the LCD harness. When installing a new LCD harness or LCD, stick a new insulator (HNS CONN INSULATOR) to the LCD harness.
4 Replacement Procedures 4.27 Camera module 4.27 Camera module Removing the Camera module To remove the camera m odule, follow the steps below and refer to Figure 4-40. 1. Take out the camera module from the slot and disconnect the camera harness from the connector on the camera module.
4.27 Camera module 4 Replacement Procedures PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-71 Installing the Camera module To install the camera module, follow the steps below and refer to Figure 4-40. 1. Connect the camera harness to the connector on a new camera module and stick the camera module in place.
4 Replacement Procedures 4.28 Wireless LAN antenna/Bluetooth antenna/3G antenna 4.28 Wireless LAN antenna/Bluetooth antenna/3G antenna Removing the Wireless LAN antenna/Bluetooth antenna/3G antenna To remove the wireless LAN antenna/Bluetooth antenna/3G antenna, follow the steps below and refer to Figure 4-41.
4.28 Wireless LAN antenna/Bluetooth antenna/ 3G antenna 4 Replacement Procedures PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-73 Please prepare required parts in advance, when replacing the following items. ITEM Parts List ITEM No PART NAME Quantity 51 LCD COVER ASSY 1 42 CAMERA MODULE 1 72, 73 ANTENNA 2.
4 Replacement Procedures 4.28 Wireless LAN antenna/Bluetooth antenna/3G antenna 4-74 [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710) Installing the Wireless LAN antenna/Bluetooth antenna/3G antenna To install the wireless LAN antenna/Bluetooth antenna/3G antenna, follow the steps below and refer to Figure 4-41.
4.28 Wireless LAN antenna/Bluetooth antenna/ 3G antenna 4 Replacement Procedures CAUTION : Replacing the antennas with care of the followings: [S ticking the INSULATOR ANT HOLD S ] 1. Peel off the separators of the INSULATOR ANT HOLD S (12pt) and stick the INSULATOR ANT HOLD S (12pt) to the LCD cover.
4 Replacement Procedures 4.28 Wireless LAN antenna/Bluetooth antenna/3G antenna [Sticking the antennas Non 3G MODEL] <WL-LAN MODEL> 1. Stick the WL-LAN antenna Main (white) to the LCD cover. 2. Stick the WL-LAN antenna Sub (black) to the LCD cover.
4.28 Wireless LAN antenna/Bluetooth antenna/ 3G antenna 4 Replacement Procedures [Sticking the antennas 3G (EU) ＆ WL-LAN (Intel) MODEL] <WL-LAN MODEL> 1. Stick the WL-LAN antenna Main (white) to the LCD cover. <BT MODEL> 2. Stick the BT antenna (brown) to the LCD cover.
4 Replacement Procedures 4.28 Wireless LAN antenna/Bluetooth antenna/3G antenna 7. Stick the SQUARE INSULATOR (911) (5p) to the LCD cover to fix the antennas.
4.28 Wireless LAN antenna/Bluetooth antenna/ 3G antenna 4 Replacement Procedures [Sticking the antennas 3G (EU) ＆ WL-LAN (Atheros) MODEL] <WL-LAN MODEL> 1. Stick the WL-LAN antenna Main (white) to the LCD cover. 2. Stick the WL-LAN antenna Sub (black) to the LCD cover.
4 Replacement Procedures 4.28 Wireless LAN antenna/Bluetooth antenna/3G antenna 7. Stick the SQUARE INSULATOR (911) (5p) to the LCD cover to fix the antennas.
4.28 Wireless LAN antenna/Bluetooth antenna/ 3G antenna 4 Replacement Procedures [Arranging the harnesses WL-LAN MODEL] 1. Arrange the harnesses and fix them with the INSULATOR ANT HOLD S (12pt).
4 Replacement Procedures 4.28 Wireless LAN antenna/Bluetooth antenna/3G antenna [Arranging the harnesses ] 4-82 [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710).
4.29 Hinge 4 Replacement Procedures 4.29 Hinge Removing the Hinge To remove the hinge, follow the steps below and refer to Figure 4-42. 1. Remove the following screws securing the hinges. • M2 × 6C S-THIN HEAD × 2 • M2 × 2.4C S-THIN HEAD × 2 2.
4 Replacement Procedures 4.29 Hinge 4-84 [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710) Installing the Hinge To install the hinge, follow the steps below and refer to Figure 4-42. 1. Set the key plate and hinges (right and left) to the LCD cover, and secure them with the following screws .
[CONFIDENTIAL] Appendices.
Appendices App-ii [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710).
Appendices PORTEGE A600 Maintenance Manual ( 960-710) [CONFIDENTIAL] App-iii Appendix Content s Appendix A Handling the LCD Module ........................................................................... A-1 Appendix B Board Layout ................
Appendices App-iv [CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) C.10 CN4100 LAN interface connector (8-pin) .......................................................... C-1 1 C.1 1 CN4400 Bluetooth interface connector (20-pin) ..............
Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] App-v C.37 CN2671 Antenna interface connector (3-pin) ..................................................... C-27 C.38 CN2672 3G interface connector (3-pin) ...........................
Appendices App-vi [CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) Appendix D Keyboard Scan/Character Codes ................................................................ D-1 Appendix E Key Layout ...........................................
Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] App-vii Figures Figure B-1 System board ( FMTXS* ) layout (front) ....................................................... B-1 Figure B-2 System board ( FMTXS* ) layout (back) ........
Appendices App-viii [CONFIDENTIAL] PORTEG E A600 Maintenance Manual ( 960-710) T able B-11 SA T A ODD FPC (FSISO *) connector (front) ................................................ B-13 T able B-12 SA T A HDD FPC (FMTSH*) connectos (front/back).....
Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] App-ix System board T able C-1 Memory connector 2 (200-pin) ........................................................................ C-1 T able C-2 HDD/SSD interface connector (25-pin) .
Appendices App-x [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) T able C-29 Speaker interface connector (2-pin) ............................................................... C-22 T able C-30 System board interface connector (36-pin) ......
Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] App-xi MDC interface FPC T able C-54 System board interface connector (12-pin) .................................................... C-36 T able C-55 MDC interface connector (12-pin) .
Appendices App-xii [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710).
Appendix A Handling the LCD Module Appendices Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged duri ng assembly or disassembly. Observe the following precautions when handling the LCD module: 1.
Appendices Appendix A Handling the LCD Module 3. If the panel’s surface gets dirty, wipe it with co tton or a soft cloth. If it is still dirty, try breathing on the surface to create a light cond ensate and wipe it again. If the surface is very dirty, we recomme nd a CRT cleaning agent.
Appendix A Handling the LCD Module Appendices 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the m odule, so guard against damage from electrostatic discharge.
Appendices Appendix A Handling the LCD Module 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage.
Appendix A Handling the LCD Module Appendices 10. If you transport the module, do not use pack ing material that c ontains epoxy resin (amine) or silicon glue (alcohol or oxide). These materials can release gas that can damage the panel’s polarization.
Appendices Appendix A Handling the LCD Module A-6 [CONFIDENTIAL ] PORTEGE A600 Mai ntenance Manual ( 960-710).
Appendix B Boar d Layout Appendices Appendix B Board Layout B.1 System board (FMTXS*) Front V iew Figure B-1 System board(FMTXS*) layout (front) PORTEGE A600 Maint enance Manual (960-710) [CONFIDENTIA.
Appendices Appendix B Boar d Layout B-2 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) Table B-1 System board(FMTXS*) connectors (front) Number Name CN1900 HDD/SSD I/F connector CN3010 MDC .
Appendix B Boar d Layout Appendices B.2 System board (FMTXS*) Back V iew Figure B-2 System board(FMTXS*) layout (back) PORTEGE A600 Maint enance Manual (960-710) [CONFIDENTIAL] B-3.
Appendices Appendix B Boar d Layout B-4 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) Table B-2 System board (FMTXS*) connectors and ICs (back) Number Name CN1410 Memory connector 2 CN1970.
Appendix B Boar d Layout Appendices B.3 Finger Sensor board (FMTFS*) Vie w (front) (back) Figure B-3 Finger Sensor boar d (FMTFS*) layout (front/back) Table B-3 Finger Sensor board (F MTFS *) connecto.
Appendices Appendix B Boar d Layout B.4 SW board (FMTSW*) View (front) (back) Figure B- 4 SW board F MTSW *) layout (front/back) Table B- 4 SW board (F MTSW *) connector (back) Number Name CN9630 FMTU.
Appendix B Boar d Layout Appendices B.5 Jack board (FMTJA*) View (front) (back) Figure B-5 Jack board (F MTJA *) layout (front/back) Table B-5 Jack board (F MTJA *)connector (front/back) Number Name C.
Appendices Appendix B Boar d Layout B.6 USB board (FMTUS*) View (front) (back) Figure B- 6 USB board (F MTUS *) layout (front/back) Table B- 6 USB board (F MTUS *) connector (back) Number Name CN4630 .
Appendix B Boar d Layout Appendices B.7 SD board (FSISD*) View for PORTEGE A600 (front) (back) Figure B-7 SD board (F SISD *) layout (front/back) Table B-7 SD board (F SISD *) connector ( front/back ).
Appendices Appendix B Boar d Layout B.8 SD board (FMTSD*) View for PORTEGE R600 (Not used) (front) (back) Figure B- 8 SD board (F MTSD *) layout (front/back) Table B- 8 SD board (F MTSD *) connector (.
Appendix B Boar d Layout Appendices B.9 Antenna board (FMT A T*) View for PORTEGE R600 (Not used) (front) (back) Figure B- 9 Antenna board (FMTAT*) layout (front/back) Table B- 9 Antenna board (F MTAT.
Appendices Appendix B Boar d Layout B.10 P A T A ODD FPC (FMTPO*) View for PORTEGE R600 (Not used) (front) (back) Figure B- 8 PATA ODD FPC (F MTPO *) layout (front) Table B- 8 PATA ODD FPC (F MTPO *) connector ( front ) Number Name CN1810 P A T A ODD I/F connector CN1830 FMTSD* board I/F connector B.
Appendix B Boar d Layout Appendices (front) (back) Figure B- 11 SATA ODD FPC (F SISO *) layout (front/back) Table B- 11 SATA ODD FPC (F SISO *) connector ( front ) Number Name CN1950 SA T A ODD I/F co.
Appendices Appendix B Boar d Layout B.12 SA T A HDD FPC (FMTSH*) View (front) (back) Figure B- 12 SATA HDD FPC (F MTSH *) layout (front /back ) Table B- 12 SATA HDD FPC (F MTSH *) connector ( front/ba.
Appendix B Boar d Layout Appendices B.13 MDC interface FPC (FSIMD*) V iew for PORTEGE A600 (front) (back) Figure B- 13 MDC interface FPC (F SIMD *) layout (front /back ) Table B- 13 MDC interface FPC .
Appendices Appendix B Boar d Layout B.14 PCIe MiniCard FPC (FMT3G*) V iew for PORTEGE R600 (Not used) (front) Figure B- 14 PCIe MiniCard FPC (F MT3G *) layout (front) Table B- 14 PCIe MiniCard FPC (F .
Appendix B Boar d Layout Appendices B.15 PCIe MiniCard FPC (FSI3G*) V iew for PORTEGE A600 (front) Figure B- 15 PCIe MiniCard FPC (F SI3G *) layout (front) Table B- 15 PCIe MiniCard FPC (F SI3G *) con.
Appendices Appendix B Boar d Layout B-18 [CONFID ENTIAL] PORTEGE A600 Maintenance Manual (960-710).
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C- 1 Appendix C Pin Assignments System board (FMTXS ＊ ) C.1 CN1410 Memory connector 2 (200-pin) Table C-1 Memory connector 2 (200-pin) (1/3) Pin No. Signal Name Pin No.
Appendices Appendix C Pin Assignments C-2 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) Table C-1 Memory connector 2 (200-pin) (2/3) Pin No.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-3 Table C-1 Memory connector 2 (200-pin) (3/3) Pin No.
Appendices Appendix C Pin Assignments C-4 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) C.2 CN1900 HDD/SSD interface connector (25-pin) Table C-2 HDD/SSD interface connector (25-pin) Pin No.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-5 C.3 CN1970 eSATA&USB interface connector (11-pin) Table C-3 eSATA&USB interface connector (11-pin) Pin No.
Appendices Appendix C Pin Assignments C-6 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) C.4 CN2520 Expresscard interface connector (40-pin) Table C-4 Expresscard interface connector (40-pin) Pin No.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-7 Blanc page.
Appendices Appendix C Pin Assignments C-8 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710) C.5 CN2300 Docking interface connector (64-pin) Table C-5 Docking interface connector (64-pin) Pin No.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-9 C.6 CN2600 Mini PCI Express interface connector (52-pin) Table C-6 Mini PCI Express interface connector (52-pin) Pin No.
Appendices Appendix C Pin Assignments C-10 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) C.7 CN2750 FSI3G* board interface connector (25-pin) Table C-7 FSI3G* board interface connector (25-pin) Pin No.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-11 C.9 CN3230 Keyboard interface connector (30-pin) Table C-9 keyboard interface connector (30-pin) Pin No.
Appendices Appendix C Pin Assignments C-12 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) C.11 CN4400 Bluetooth interface connector (20-pin) Table C-11 Bluetooth interface connector (20-pin) Pin No.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-13 C.13 CN5601 LCD interface connector (35-pin) Table C-13 LCD interface connector (35-pin) Pin No.
Appendices Appendix C Pin Assignments C-14 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) C.14 CN8771 FAN interface connector (4-pin) Table C-14 FAN interface connector (4-pin) Pin No. Signal Name Pin No. Signal Name 1 E5V 2 FANGO-P3P 3 GND 4 (IC8773-4) C.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-15 C.18 CN9400 SATA ODD interface connector (20-pin) Table C-18 SATA ODD interface connector (20-pin) Pin No.
Appendices Appendix C Pin Assignments C-16 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) C.19 CN9500 FMTJA* board interface connector (36-pin) Table C-19 FMTJA* board interface connector (36-pin) Pin No.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-17 C.21 CN9600 FMTUS* board interface connector (30-pin) Table C-21 FMTUS* board interface connector (30-pin) Pin No.
Appendices Appendix C Pin Assignments C-18 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) C.22 CN9700 FMTSD*/FSISD* boa rd interface connector (30-pin) Table C-22 FMTSD*/FSISD* board interface connector (30-pin) Pin No. Signal Name Pin No.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-19 C.23 CN9800 FMTFS* board interface connector (6-pin) Table C-23 FMTFS* board interface connector (6-pin) Pin No. Signal Name Pin No. Signal Name 1 GND 2 ZUSBFS-E3P 3 ZUSBFS-E3N 4 GND 5 FGSPON-S3N 6 E3V 1T GND 2T GND C.
Appendices Appendix C Pin Assignments C-20 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) Finger Sensor board (FMTFS*) C.25 CN9810 System board interface connector (6-pin) Table C-25 System board interface connector (6-pin) Pin No. Signal Name Pin No.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-21 SW board (FMTSW*) C.26 CN9630 FMTUS* board interface connector (3-pin) Table C-26 FMTUS* board interface connector (3-pin) Pin No.
Appendices Appendix C Pin Assignments C-22 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) JACK board (FMTJA*) C.27 CN4620 USB (PORT6) interface connector (4-pin) Table C-27 USB(PORT6) interface connector (4-pin) Pin No. Signal Name Pin No.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-23 C.30 CN9510 System board interface connector (36-pin) Table C-30 System board interface connector (36-pin) Pin No.
Appendices Appendix C Pin Assignments C-24 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) C.31 J6050 Microphone interface connector (6-pin) Table C-31 Microphone interface connector (6-pin) Pin No. Signal Name Pin No. Signal Name 1 GND 2 EMICIN-PXP 3 EMICB-P2V 4 GND 5 DETCTA-P4N 6 EMICB-P2V C.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-25 USB board (FMTUS*) C.33 CN4630 USB (PORT0) interface connector (4-pin) Table C-33 USB(PORT0) interface connector (4-pin) Pin No. Signal Name Pin No. Signal Name 1 USB0PS-E5V 2 ZUSBP0-E3N 3 ZUSBP0-E3P 4 GND 1T GND 2T GND 3T GND C.
Appendices Appendix C Pin Assignments C-26 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) C.35 CN9610 System board interface connector (20-pin) Table C-35 System board interface connector (20-pin) Pin No.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-27 SD board (FSISD*) for PORTEGE A600 C.37 CN2671 Antenna interface connector (3-pin) Table C-37 Antenna interface connector (3-pin) Pin No. Signal Name Pin No.
Appendices Appendix C Pin Assignments C-28 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) C.40 CN9710 System board interface connector (20-pin) Table C-40 System board interface connector (20-pin) Pin No.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-29 SD board (FMTSD*) for PORTEGE R600 (Not used) C.42 CN1820 FMTPO* board interface connector (50-pin) Table C-42 FMTPO* board interface connector (50-pin) Pin No.
Appendices Appendix C Pin Assignments C-30 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) C.43 CN9710 System board interface connector (30-pin) Table C-43 System board interface connector (30-pin) Pin No.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-31 Antenna board (FMTAT*) for PORTEGE R600 (Not used) C.45 CN2671 Antenna interface connector (3-pin) Table C-42 Antenna interface connector (3-pin) Pin No.
Appendices Appendix C Pin Assignments C-32 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) PATA ODD FPC (FMTPO*) for PORTEGE R600 (Not used) C.48 CN1810 PATA ODD interface connector (50-pin) Table C-45 PATA ODD interface connector (50-pin) Pin No.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-33 C.49 CN1830 FMTSD* board interface connector (50-pin) Table C-46 FMTSD* board interface connector (50-pin) Pin No.
Appendices Appendix C Pin Assignments C-34 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) SATA ODD FPC (FSISO*) for PORTEGE A600 C.50 CN1950 SATA ODD interface connector (13-pin) Table C-47 SATA ODD interface connector (13-pin) Pin No. Signal Name Pin No.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-35 SATA HDD FPC (FMTSH*) C.52 CN1810 System board interface connector (25-pin) Table C-49 System board interface connector (25-pin) Pin No. Signal Name Pin No.
Appendices Appendix C Pin Assignments C-36 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) MDC interface FPC (FSIMD*) for PORTEGE A600 C.54 CN3020 System board interface connector (12-pin) Table C-51 System board interface connector (12-pin) Pin No.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-37 PCIe MiniCard FPC (FMT3G*) for PORTEGE R600 (Not used) C.56 CN2621 Mini Card Slot2 interface connector (50-pin) Table C-53 Mini Card Slot2 interface connector (50-pin) Pin No.
Appendices Appendix C Pin Assignments C-38 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) C.57 CN2760 System board interface connector (25-pin) Table C-54 System board interface connector (25-pin) Pin No.
Appendix C Pin Assignments Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] C-39 PCIe MiniCard FPC (FSI3G*) for PORTEGE A600 C.59 CN2621 Mini Card Slot2 interface connector (50-pin) Table C-56 Mini Card Slot2 interface connector (50-pin) Pin No.
Appendices Appendix C Pin Assignments C-40 [ CONFIDENTIAL] PORTEGE A600 Maintenance Manual ( 960-710) C.60 CN2760 System board interface connector (25-pin) Table C-57 System board interface connector (25-pin) Pin No.
Appendix D Keyboard Scan/Character Codes Appendices PORTEGE A600 Maintenan ce Manual (960-71 0) [CONFID ENTIAL] D-1 Appendix. D Appendix D Keyboard Scan/Character Codes D.1 Scan Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Cap No.
Appendices Appendix D Keyboard Scan/Character Codes D-2 [CONFIDENTIAL ] PORTEGE A600 M aintenance M anual (960-710) Table D-1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Cap No.
Appendix D Keyboard Scan/Character Codes Appendices PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL] D-3 Table D-1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Cap No.
Appendices Appendix D Keyboard Scan/Character Codes D-4 [CONFIDENTIAL ] PORTEGE A600 M aintenance M anual (960-710) Table D-1 Scan codes (set 1 and set 2) (4/4) Code set 1 Code set 2 Cap No.
Appendix D Keyboard Scan/Character Codes Appendices PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL] D-5 Table D-2 Scan codes with left Shift key Code set 1 Code set 2 Cap No.
Appendices Appendix D Keyboard Scan/Character Codes D-6 [CONFIDENTIAL ] PORTEGE A600 M aintenance M anual (960-710) Table D-3 Scan codes in Numlock mode Code set 1 Code set 2 Cap No.
Appendix D Keyboard Scan/Character Codes Appendices PORTEGE A600 Mainten ance Manual ( 960-710) [CONFIDENTIAL] D-7 Table D-5 Scan codes in overlay mode Code set 1 Code set 2 Cap No.
Appendices Appendix D Keyboard Scan/Character Codes D-8 [CONFIDENTIAL ] PORTEGE A600 M aintenance M anual (960-710) Table D-7 No.126 key scan code Code set 1 Code set 2 Key top Shift Make Make Pause Co m m on * E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl* E0 46 E0 C6 E0 7E E0 F0 7E *: This key generates only make codes.
Appendix E Key Layout Appendices 4 Appendix E Key Layout E.1 United Kingdom (UK) Keyboard Figur e E-1 UK keyboar d E.2 United States (US) Keyboard Figur e E-2 US keyboar d PORTEGE A600 Maintenance Man.
Appendices Appendix E Key Layout E.3 Thai Keyboard Figur e E-3 Thai keyboar d E.4 Canadian French Keyboard Figur e E-4 Canadian Fr ench keyboar d E-2 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (96.
Appendix F W iring diagrams Appendices F Appendix F Wiring diagrams F.1 RGB Monitor Loopback Connector Figur e F-1 RGB Monitor Loopback Connector F.2 LAN Loopback Connector Figur e F-2 LAN Loopback Co.
Appendices Appendix F W iring diagrams F-2 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710).
Appendix G BIOS r ewrite pr ocedur es Appendices Appendix G Appendix G BIOS Rewrite Procedures This Appendix explains how to rewrite th e system BIOS program when you update the system BIOS. Tools T o rewrite the BIOS, you need the following tool: BIOS/EC/KBC rewriting disk Rewriting the BIOS 1.
Appendices Appendix G BIOS r ewrite pr ocedures G-2 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710).
Appendix H EC/KBC r ewrite pr ocedures Appendices PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL] H-1 Appendix H Appendix H EC/KBC Rewrite Procedures This Appendix explains how to rewrite th e EC/KBC system program when you update the EC/KBC system.
Appendices Appendix H EC/KBC r ewrite pr ocedures H-2 [CONFIDENTIAL] PORTEGE A600 Maintenance Manual (960-710).
Appendix I Reliability Appendices PORTEGE A600 Maintenan ce Manual (960-71 0) [CONFIDENTIAL] I-1 Appendix I Reliability Appendix I Reliability The following table shows MTBF (Mean Time Between Failures ) in maximum configuration . Table I-1 MTBF Time (hours) 5,703.
Appendices Appendix I Reliability I-2 [CONFIDENTIAL ] PORTEGE A600 Mainten ance Manual ( 960-710).
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Toshiba PORTG A600 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Toshiba PORTG A600 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Toshiba PORTG A600 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Toshiba PORTG A600 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Toshiba PORTG A600, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Toshiba PORTG A600.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Toshiba PORTG A600. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Toshiba PORTG A600 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
