Manuale d’uso / di manutenzione del prodotto L645 del fabbricante Toshiba
Vai alla pagina of 281
Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645M aintenance Manual (960-Q08) Toshiba Personal Computer Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual .
Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645Mai ntenance Manual (960-Q08) Copyright © 2010 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba.
Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645Mai ntenance Manual (960-Q08) Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Series.
Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645Mai ntenance Manual (960-Q08) The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 system unit and each FRU.
Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645Mai ntenance Manual (960-Q08) Conventions This manual uses the following formats to describe, identify, and highlight term s and operating procedures.
Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645Mai ntenance Manual (960-Q08) Table of Contents Chapter 1 Hardware Overview 1.1 Features ....................................................................................................
Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645Mai ntenance Manual (960-Q08) Chapter 2 Troubleshooting Procedures 2.1 Troubleshooting ......................................................................................................
Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645Mai ntenance Manual (960-Q08) 2.8 Display Troubleshooting..............................................................................................23 Procedure 1 External Monitor Check.
Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645Mai ntenance Manual (960-Q08) Procedure 1 Sound Recorder Execution Check .......................................... 39 Procedure 2 Connect Check and Replacement Check…………………….
Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645Mai ntenance Manual (960-Q08) Chapter 3 Diagnostic Programs 3.1 Tests and Diagnostics Software Overview ....................................................................2 3.2 Executing the Diagnostic Test .
Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645Mai ntenance Manual (960-Q08) Chapter 4 Replacement Procedures 4.1 Overview .................................................................................................................
Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645Mai ntenance Manual (960-Q08) Appendices Appendix A Handling the LCD Module ................................................................................1 Appendix B Board Layout .......
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) Chapter 1 Hardware Overview.
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) 1 Hardware Overview Chapter 1 Contents 1.1 Features ...........................................................................
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) Figures Figure 1-1-1 Left of the computer .....................................................................................
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) Features 1.1 Features The Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 ( Intel Platform) features are listed below.
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) SSD 64GB, 128GB, 256GB, 512GB. 2.5 inch x 9.5mm height. ODD 12.7mm integrated ODD Support: DVD Super Multi (+-R D ouble Layer) & Blue Ray ODD.
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) Modem Connectors for Modem is separately mounted Battery The RTC battery is equipped inside the computer. The main battery is a detachable lithium ion battery.
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) Bluetooth Some computers in this series of fer Bl uetooth wireless communication functiona lity with Broadcom 802.11(b/g/n) BCM94313-HM C w/ BT V3.
Chapter 1 Hardware Overview 16 15 14 13 17 13 1 2 12 3 11 18 4 5 67 8 10 9 Figure 1-1-1 left of the computer 1. Security Lock Hole 13. Touch Pad 2. RJ11 Port 14. Keyboard 3. FAN Hole 15. LCD Panel 4. RL45 Port 16. Web camera 5. HDMI Port 17. Power Button 6.
Chapter 1 Hardware Overview 18 19 20 21 22 Figure 1-1-2 right of the computer 18. Speaker 19. DC-IN Jack 20. CRT Port 21. USB Port 22. ODD Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L.
Chapter 1 Hardware Overview 1.2 System Block Diagram Figure 1-2-1 shows the system block diagram. Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08).
Chapter 1 Hardware Overview Figure 1-1-1 System block diagram for Intel Platform Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08).
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) The PC contains the following components.
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) VGA Card AMD-ATI (Madison-LP, Park-XT, M92XTX) Supports ATI HyperMemory* Supports PCI-E Gen2 (version 2.
Chapter 1 Hardware Overview 1.3 2.5-inch Hard Disk Drive A compact, high-capacity HDD is with a height of 9.5mm and contains a 2.5-inch magnetic disk and magnetic heads. Figure 1-3-1 shows a view of the 2.5-inch HDD and Tables 1-3-2 and 1-3-3 list the specifications.
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) Standard value Parameter WD1600BEVT WD2500BEVT W D3200BEVT WD6400BEVT WD5000 BEVT Outline Width (mm) 69.85 +/- 0.25 dimensions Height (mm) 9.
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) Average random seek time(read)(ms) 12 Power-on-to- ready (sec ) 3.
Chapter 1 Hardware Overview 1.4 Keyboard The Rostock 10G keyboard has two different kind s of placement, here is for US style for your reference. Figure 1-4-1 is a view of the keyboard for US style Fi.
Chapter 1 Hardware Overview 1.5 TFT Color Display The Satellite L645, Satellite Pro L645 use LED to control backlight. 1.5.1 LCD Function Block Figure 1-5-1 shows a view of the LCD F unction Block and Table 1-5-2 lists the specifications.
Chapter 1 Hardware Overview 1.5.2 LCD Module Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08).
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) 1.6 Power Rails Table 1-6-1 lists the power rail output specifications of Calpella platform.
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) 1.7 Batteries The PC has the following two batteries. Main battery Real time clock (RTC) battery Table 1-7-1 lists the specification s for these two batteries.
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) Sanyo 6cell 5600mAhr Pana 6cell 5600mAhr 4hr can charge to full Sanyo 12cell 9000mAhr 5hr can charge to full Table 1-7-2 Time required fo r charges of main battery Charge is stopped in the following cases.
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) 1.7.3 RTC Battery The RTC battery provides the power supply to maintain the date, time, and other system information in memory.
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) 1.8 AC Adapter The AC adapter is used to charge the battery.
Chapter 1 Hardware Overview 1.9 ODD 1.9.1 DVD Super Multi drive The DVD Super Multi drive accommodates eith er 12 cm (4.72-inch) or 8 cm (3.15-inch) CD/DVD-ROM, CD-R/RW, DVD±R/±RW and DVD-RA M. It is a high-performance drive that reads DVD-ROM at maximum 8-speed a nd CD at maximum 24-sp eed.
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) Drive Specification TST TS T Parameter TS-L633C TS-L633Y CD-ROM Max. 24X (3,600 KB/sec) CD-ROM Max. 24X (3,600 KB/sec) CD-R Max.
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) DVD±R Dual (Read & Write) DVD±R Dual (Read & Write) DVD-RAM (Read .
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) 1.9.2 Blue Ray ODD The dimensions and specifications of the DVD Super Multi .
Chapter 1 Hardware Overview Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) DVD+R :Max.8X CAV DVD+R :Max.8X CAV DVD+R DL :Max.4X Zone CLV DVD+R DL :Max.4X Zone CL V DVD+RW :Max.8X Zone CLV DVD+RW :Max.8X Zone CLV DVD-RAM :3X-5X PCAV ( 4.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Chapter 2 Troubleshooting Procedures.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Chapter 2 Contents Chapter 2 Contents 2.1 Troubleshooting ............................................................
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 2.8 Display Troubleshooting ..........................................................................................
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 2.17 Microphone Troubleshooting...................................................................................... 39 Procedure 1 Sound Recorder Execution Check .
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 2 2.1 Troubleshooting Chapter 2 describes how to determine which Field Replaceable Unit (FRU) in the computer is causing the computer to malfunction.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 2.2 Troubleshooting Flowchart Use the flowchart in Figure 2-2-1 as a guide for determining which troubleshooting procedures to execute.
Chapter 2 Troubleshooting Procedures Figure 2-2-1 Troubleshooting flowchart (1/2) Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) .
Chapter 2 Troubleshooting Procedures Figure 2-2-1 Troubleshooting flowchart (2/2) If the diagnostics program cannot detect an e rror, the problem may be intermittent.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 4. If an error is found on th e touch pad test, perform the Touch pad Troubleshooting Procedures in Section 2.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 2.3 Power Supply Troubleshooting The power supply controller cont rols many functions and compone nts.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) DC IN icon Power supply status Lights blue DC power is being supplie d from the AC adapter. Blinks orange Power supply malfunctio n *1 Doesn’t light Any condition other than those above.
Chapter 2 Troubleshooting Procedures Proc Connection Ch The wiring diagram related to th e po edure 2 eck wer supply is shown below: Any of the connectors may be disconnected. Perform Check 1. Ch rmly plugged into the DC these cables are connected Check 2 ot light, go to Procedure 4.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Check 4 The battery’s temperature is too high or low. Leave the battery for a while to adjust it in the right temperature.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Procedure 4 Replacement Check The power is supplied to the system board by the AC adapter. If either the AC adapter or the system board was damaged, perform the following Checks.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 2.4 System Board Troublesho oting is malfunctioning or not. Start with Procedure 1 and continue with the other procedures as instructed.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Procedure 1 Message Check When the power is turned on, the system perfor ms the Power on Self Test (POST) installed shown on the display, perform Check 1.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Procedure 2 Diagnostic Test Program Execution Check erform these tests. 1. System test 7. Ma 8. BIO 9.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 2.5 SATA HDD/SSD Troubleshooting To check if 2.5” HDD/SSD is malfunctioning or not, follow the troubleshooting procedure below as ins s tructed.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Procedure 2 Message Check When the power is turned on, the system perfor ms the Initial Reliability T est (IRT) installed n.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Procedure 3 Format Check The computer’s HDD/SSD is formatted usi ng the Free-DOS FORMAT program or the physical format program of the test program.
Chapter 2 Troubleshooting Procedures Procedure 4 Diagnostic Test Program Execution Check SD . escribed in Ta ble 2-5-1. If an error code is not displayed but the problem still occu rs, go to Procedure 5. Status The HDD/SSD test program is stored in the Diagnostics Disk.
Chapter 2 Troubleshooting Procedures Procedure 5 Connector Check and Replacement Check of w ise, they may be faulty. Disassemble the computer following instructions in Chapter 4, Replacement Procedures and perform the connected to the connector(s) on the system board.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 2.
Chapter 2 Troubleshooting Procedures Procedure 2 Connector and Replacement Check The connection of cable and board may be de fective. Otherwise, they may be faulty. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: Check 1 stem board.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 2.
Chapter 2 Troubleshooting Procedures Procedure 2 Connector and Replacement Check The connection of cable and board may be de fective. Otherwise, they may be faulty. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: Check 1 oard.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 2.8 Display Troubleshooting T p P Procedure 3: Connector and Cable .
Chapter 2 Troubleshooting Procedures Procedure 3 Connector and Cable Check LCD Module is connected to system board by an LCD. Their cables may be disconnecte from system board. Disassemble d the computer following the steps described in Chapter 4, Replacement Procedures .
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Procedure 4 Replacement Check LCD module, LCD cable are connected to displa y circuits. Any of these com ponents may b faulty.
Chapter 2 Troubleshooting Procedures 2.9 LAN Troubleshooting Procedure 1: Diagnostic Te st Program Execution Check Procedur Execute LA for more information on how to perform the test program.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 2.10 Wireless LAN Troubleshooting hooting Procedure 3: Replacement .
Chapter 2 Troubleshooting Procedures Procedure 2 Antennas' Connection Check The wireless LAN function-wiri ng diagram is shown below: Any of the connections may be defective.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Procedure 3 Replacement Check Wireless LAN card, wireless LAN antenna or system board may be faulty.
Chapter 2 Troubleshooting Procedures 2.11 Sound Troubleshooting To check if the sound function is malfunctioning or not, follow the troubleshooting proce below as instructed. dures The conne Procedure 1: Connector Check Procedure 2: Replacement Check Procedure 1 Connector Check ction of sound system is shown in the following figure.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Procedure 2 Replacement Check If External microphone/Headphone does not work properly, perform check 1. If internal microphone /Speaker do no t work properly, perform check 2.
Chapter 2 Troubleshooting Procedures 2.12 Bluetooth Troubleshooting hooting procedure below as instructed. Procedure 1: Connector Check and Replacement Check eck he B lue tooth module is connected to system board. If B lue tooth m alfunctions, its connection is defective or B lue tooth cable and system board may be faulty.
Chapter 2 Troubleshooting Procedures 2.13 HDMI Troubleshooting To check if the computer’s HDMI is malf unctioning or not, follow the troubleshooting procedures below as instructed. Procedure 2: Connector and Cable Check Check 1 Make sure HDMI cable is firmly conn ected to the connector CN13 (system board).
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Procedure 3 Connector and Cable Check HDMI monitor connected to System board by an HDMI cable. If the connection is loose, reconnect firmly and restart the computer.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Procedure 4 Replacement Check HDMI signals are connected to display circ uits via HDMI cable and HDMI&USB board. Any of these components may be faulty.
Chapter 2 Troubleshooting Procedures 2.14 Memory Troubleshooting Procedure 1 tion Check Execute Me If any error is detected by the test, go to Procedure 2. r Memory fu un abnormal, the RAM may be not re Check 1 he slots. If the problem still Memory troubleshooting can following be low procedures as instructed.
Chapter 2 Troubleshooting Procedures 2.15 3G Troubleshooting To check if the computer’s 3G is malfuncti oning or not, follow the troubleshooting procedure below as instructed. Procedur onn ection is defective or Antenna and system board may be faulty.
Chapter 2 Troubleshooting Procedures 2.16 Camera Troubleshooting structed. Procedure 1: Camera Execution Check ck Procedure 2 Connect Check and Replacement Check The CCD cable is connected to system boa rd integrated with LCD cable. If camera malfunctions, its connection may be defective or LCD/CCD cable and system board may be faulty.
Chapter 2 Troubleshooting Procedures 2.17 Microphone Troubleshooting Procedure 1: Sound Recorder Execution Check ement Check Procedure 1 Sound Recorder Execution Check Open accessory to find sound recorder tool, try to record a length of sound, and then replay it f faulty.
Chapter 2 Troubleshooting Procedures 2.18 CRT Troubleshooting To check if the computer’s CRT is malfunctioning or not, follow the troubleshooting procedures below as instructed.
Chapter 2 Troubleshooting Procedures 2.19 USB Board Troubleshooting not, dures below as instructed. Execution Check ent Check Procedure 1 Diagnostic Test Program Execution Check ent Check rs, Flatiron carries 3 USB port.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 2.20 LED Troubleshooting These are 6 LED lights at Top assy. From left to right, the Open statuses of them represent functions as below.
Chapter 2 Troubleshooting Procedures 2.21 Optical Disk Drive Troubleshooting s n Check onnector Check and Replacement Check est Program Execution Check Execute th rogram. Refer to Chapter 3, Tests and Diagn gram. r Check and Replacement Check tive. Otherwise, they may n Chapter 4 and perform ystem board.
Chapter 2 Troubleshooting Procedures 2.22 Modem Troubleshooting To check if modem is malfunctioning or not, fo llow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check te gram.
Chapter 2 Troubleshooting Procedures Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Check 2 Modem cable m ay be faulty. R perform Check 3. eplace it with a new one. If the problem still occurs, still occu rs, perform Check 4.
Chapter 2 Troubleshooting Procedures 2.23 3 in 1 Card Reader Troubleshooting To check if the computer’s 3 in 1 Card Reader is malfunctioning or not, follows the ting procedures below as instructed. troubleshoo The media fault, so please change a new media card and re-test the 3 in 1 Card eader to check if the Card Reader is malfunctioning or not.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L 645 Maintenance Manual (960-Q08) Chapter 3 Diagnostic Programs.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) Chapter 3 Contents 3.1 ............................................................ 3-3 Tests and Diagnostics Software Overview 3.2 ...
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L 645 Maintenance Manual (960-Q08) 3.1 Tests and Diagnostics Software Overview This chapter explains how to use the Tests and Diagnostics Software for the Satellite L640 computer systems.
Test Program for Field. 3.2 Executing the Diagnostic Test Free-DOS is required to run the Diagnostics Program. To start the programs follow these steps: 1. Create a Free-DOS bootable disk and copy all the files from the Tests and Diagnostics software to the disk.
Test Program for Field. The following menu displays: :Select item Enter:Decision item Esc:Escape TOSHIBA Satellite L640 Diagnostics Version v1.00 [ DIAGNOSTICS MENU ] 01. DIAGNOSTIC TEST 02. RUNNING TEST 03. DMI INFORMATION 04. LOG UTILITIES 05. SYSTEM CONFIGURATION ::Select item ESC :Escape 06.
Test Program for Field. 4. Select the subtest you want to execute and press Enter . The following menu displays: Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) 5. Select the desired test from the subtest menu and press Enter .
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L 645 Maintenance Manual (960-Q08) NOTES : The Item2 and 3 of Test Parameter are not used by some tests. Go To Test Move the highlight bar to Go To Test and press Enter to start executing the test.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) 3.3 Subtest names Table 3-1 lists the subtest names for each test program in the Diagnostic Test menu. Table 3-1 Subtest Names(1/3) No.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L 645 Maintenance Manual (960-Q08) Table 3-1 Subtest Names(2/3) No. Test Name No.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) Table 3-1 Subtest Names(3/3) No. Test Name No.
Test Program for Field. 3.4 System Test To execute the System Test select 01 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The System Test contains three subtests. Move the highlight bar to the subtest you want to execute and press Enter .
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) Subtest 03 CPU Temperature This will display CPU Temperature for check , press [ESC] to exit .
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L 645 Maintenance Manual (960-Q08) 3.5 Memory Test To execute the Memory Test select 02 from the Diagnostic Test Menu, press Enter and follow the directions on the screen.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) 5. Address pattern test “16 bit write and 16 bit read” of address pattern data is executed and the new data is compared with the original data.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L 645 Maintenance Manual (960-Q08) with the original data patterns. Addresses are displayed in 64KB increments during the test. Test Process: 1. Byte Enable Test One bit write/ 8 bit read” is executed and the new data is compared with the original data.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) Test Process: 1. Checks the memory size to determ ine the maxim um size of installed memor y. 2. Tests memory addresses 0 to the m aximum installed.
Test Program for Field. 3.6 Keyboard Test To execute the Keyboard Test select 03 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Keyboard Test contains four subtests that test the computer’s keyboard and mouse actions.
Test Program for Field. Subtest 04 PS/2 Mouse (Pointing) This subtest checks the function of mouse as shown below. A) Pointing device (mouse) B) Mouse buttons Please move cursor to upper left and pres.
Test Program for Field. 3.7 Display Test To execute the Display Test select 04 from the Diagnostic Test Menu, press Enter and follow the directions displayed on the screen. The Display Test contains twelve subtests that test the display in various modes.
Test Program for Field. Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Subtest 02 Character Set This subtest displays the character codes 00H - FFH, using Mode 01H (40*25).
Test Program for Field. Subtest 03 80 * 25 Character Display This subtest uses 80*25 video resolution to display character codes 20H - 7EH using Mode 03H (80*25).
Test Program for Field. Subtest 04 320 * 200 Character Display This subtest uses 320*200 video resolution to display green, red and yellow followed by cyan, magenta, and white.
Test Program for Field. 320*200 GRAPHICS DISPLAY : [ D ] BLACK D GRAY BLUE L BLUE GREEN L GREEN CYAN L CYAN RED L RED MAGENTA L MAGENTA BROWN YELLOW WHITE I WHITE Press [Enter] KEY Press ENTER to display 64 gradations of red, green, blue and white on the screen 320*200 GRAPHICS DISPLAY : [ 13 ] Press [Enter] KEY 64 gradations of red are displayed.
Test Program for Field. Subtest 05 640 * 200 Character Display This subtest uses 640*200 video resolution to display three windows, each window drives a different set of dots: even dots, odd dots and all dots. The screen below displays when this subtest is executed.
Test Program for Field. Subtest 06 640 * 480 Character Display This subtest uses 640*350 video resolution to display 16 colors: black, blue, green, cyan, red, magenta, brown, white, dark gray, light blue, light green, light cyan, light red, light magenta, yellow, and intensified white.
Test Program for Field. 640*480 GRAPHICS DISPLAY : [12 ] BLACK DARK GRAY BLUE LIGHT BLUE GREEN LIGHT GREEN CYAN LIGHT CYAN RED LIGHT RED MAGENTA LIGHT MAGENTA BROWN YELLOW WHITE INTENSIFIED WHITE Press [Enter] KEY To exit this subtest and return to the Display Test menu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu.
Test Program for Field. Subtest 07 Display Page This subtest displays video pages zero through seven. DISPLAY PAGE 0 000000000000000000000000000000000000000000000000000000000000000 0............................................................0 0......
Test Program for Field. Subtest 08 "H" Pattern Display This subtest displays a full screen of "H" patterns. HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HH.
Test Program for Field. Subtest 10 Color Graphics Display This subtest displays three colors, cyan, white and yellow on the screen as shown below. 640 * 480 GRAPHICS DISPLAY CYAN WHITE YELLOW To exit this subtest and return to the Display Test menu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu.
Test Program for Field. Subtest 11 Color Attributes Display This subtest displays 16 colors: black, blue, green, cyan, red, magenta, brown, white, dark gray, light blue, light green, light cyan, light red, light magenta, yellow, and intensified white.
Test Program for Field. NOTE: The following screen does not display correctly. It will be amended in the next version. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L 645 Maintenance Manual (960-Q08) Press [Enter] Key Press Enter to execute the VRAM mapping test which displays a vertical line at four dot intervals using Mode 12.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) Press [Enter] Key To exit this subtest and return to the Display Test menu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L 645 Maintenance Manual (960-Q08) Subtest 12 Color Tiling This subtest displays black, gray, white, and 3 gradations of red, green, and blue as shown in the following display.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) 3.8 Floppy Disk Test CAUTION : Before running the floppy disk test, prepare a formatted work disk. Remove the diagnostics disk and insert the work disk into the FDD.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L 645 Maintenance Manual (960-Q08) Subtest 04 Write Specified Address NOTE : The first two digits of the ADDRESS indicate which track is being tested, the next two digits indicates the head, and the last two digits indicate the sector.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) 3.9 Hard Disk Test To execute the Hard Disk Test select 06 from the Diagnostic Test Menu, press Enter and follow the directions on the screen.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L 645 Maintenance Manual (960-Q08) Subtest 04 Cross Talk and Peak Shift This subtest writes eight of the most likely to fail data patterns (shown below) to a cylinder on the HDD, then reads the data while moving from cylinder to cylinder.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) Subtest 07 Sequential Write This subtest writes specified data to all cylinders on the HDD. The following message displays on the screen to enter the test data.
Test Program for Field. 3.10 Real Time Clock Test To execute the Real Time Clock Test select 07 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Real Time Clock Test contains three subtests that test the computer’s real time functions.
Test Program for Field. Subtest 02 Backup Memory This subtest writes 50 bytes of test data (FFH, AAH, 55H, and 00H) to the CMOS 14 th address, then reads the new data and compares it to the original data. Subtest 03 Real Time Carry CAUTION : When this subtest is executed, the current date and time are reset.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L 645 Maintenance Manual (960-Q08) 3.11 Cache Memory Test To execute the Cache Memory Test select 08 from the Diagnostic Test Menu, press Enter and follow the directions on the screen.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) Subtest 04 Bit Shift Pattern Test This subtest reads the contents of cache memory and saves it into RAM.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L 645 Maintenance Manual (960-Q08) 3.12 High Resolution Display Test To execute the High Resolution Display Test select 09 from the Diagnostic Test Menu, press Enter and follow the directions on the screen.
Test Program for Field. Subtest 02 640*480 Mode Display This subtest uses 640*480 video resolution to display a high resolution white frame, 256 letter types (8*16 pixels) and 64 gradations of white, red, green, and blue as shown below.
Test Program for Field. Subtest 03 800 * 600 Mode Display This subtest uses 800*600 video resolution to display a high resolution white frame, 256 letter types (8*16 pixels) and 256 gradations of white, red, green, and blue as shown below.
Test Program for Field. Subtest 04 1024* 768 Mode Display This subtest uses 1024*768 video resolution to display a high resolution white frame, 256 letter types (8*16 pixels) and 64 gradations of white, red, green, and blue as shown below.
Test Program for Field. Subtest 05 “H” Pattern Display This subtest uses the 1024*768 Mode to display a high resolution white frame, “H” letters (8*16 pixels fonts), at 128 letters by 48 lines.
Test Program for Field. Subtest 06 Focus Test ( “E” Pattern) This subtest sets the 1024*768 Mode and displays “E” patterns (18*18 dot fonts), at 56 letters *42 lines surrounded by a high resolution white frame.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L 645 Maintenance Manual (960-Q08) 3.13 Multimedia Test To execute the Multimedia Test select 10 from the Diagnostic Test Menu, press Enter and follow the directions on the screen.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) 3.14 MEMORY2 Test To execute the Expansion Test select 11 from the Diagnostic Test Menu, press Enter and follow the directions on the screen.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L 645 Maintenance Manual (960-Q08) Subtest 04 Walking 1/Walking 0 test (Left/ Right) Tee test method is the same as Subtest2.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) 3.15 Error Codes and Error Status Names The following table lists the error codes and error status names for the Diagnostic Tests.
Test Program for Field. Table 3-2 Error codes and error status names (2/2) Device Name Error Code Error Status Name HDD BB Undefined Error CC Write Fault E0 Status Error F0 No Sense Error ?? Other Err.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) 3.16 Running Test NOTES : 1. You may add or delete subtests using the Running Test Edit Item function, see Section 3.20. 2. Do not forget to insert a work disk in the FDD.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L 645 Maintenance Manual (960-Q08) 3.17 DMI INFOEMATION Select 03 from the Diagnostics Menu and press Enter to Check or W rite DMI Information Data: 3.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) c. AC Adapter Select [1]65W [2]75W [3]90W [4]120W [5]180W Select 1 ~ c to keyin new .
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L 645 Maintenance Manual (960-Q08) 7. UUID : Total is 16 byte data , Front 10 byte is time random data , last 6 byte is LAN MAC . 8. Brightness Table : It depend on LCD EDID to set different brightness data .
Test Program for Field. 3.18 Log Utilities This function logs error information generated while a test is in progress and stores the results in RAM (Maximum error log : 500 tim es). This function can store data on a floppy disk. If the power switch is turned off, the erro r inform ation will be lost.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L 645 Maintenance Manual (960-Q08) 2. Error information displayed on the screen can be manipulated with the following number keys: The 1 key scrolls the display to the next page.
Test Program for Field. 3.19 System Configuration Select 05 from the Diagnostics Menu and press Enter to display the following system configuration: SYSTEM CONFIGURATION : * - BIOS VER = VX.XX KBC VER = XXXX * - MAC ADDRESS : XXXXXXXXXXXX * - 0 ASYNC ADAPTER * - 1 HDD DRIVE(S):XXXXXXXXXXXXXXXXXXXXXXXXXX FW Rev.
Test Program for Field. 3.20 OPTION 3.20.1 Function Description Function description lets you add or delete the subtests used to execute the Running Test.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) 1. Enter a number or 0 for Loop Count and press Enter . Select a number from 1 to 65535 to define the num ber of times the Running Test executes.
Test Program for Field. 3.21 Common Tests and Operation 3.21.1 How to operate a w indow To input parameters, or open a window use the following keys. key : to move a highlight bar [Enter] key : to select an item at the highlight bar [Esc] key : to close the current window and go back to the previous window 3.
Test Program for Field. Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08) Pass Count Displays the num ber of times the test has been executed. Error Count Displays the number of errors which have occurred during the test.
Test Program for Field. 3.21.4 Test Stop Display If an error occurs during a Subtest and YES is selected for Error Stop, the following message displays: [HALT OPERATION] 1. Test end 2. Continue 3. Retry * Select 1, 2, or 3 The three selections have the following functions: 1: Terminates the test program and exits to the subtest menu.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) Chapter 4 Replacement Procedures.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) Chapter 4 Contents 4.1 Overview .........................................................................................................
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 4.21 Power Board………………………………………………………………………….68 4.22 SIM Board……………………….
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) Figure 4-9-2 Remove the scre ws (front) and Top cover assembly .................................... 34 Figure 4-9-3 Disconnect the touch pad cable/BT cable/speaker cable/power cable .
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) Figure 4-21-1 Remove power board……………..….……………………………………...68 Figure 4-22-1 Remove SIM Board………………….
Chapter 4 Replacement Procedures ========================================================================= ====================================================== ======================================.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) Safety Precautions Please read the following safety instructions before disassembling the computer and always follow the instructions w hile working on the computer.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) Before You Begin Take note of the following points before star ting work. Always remove the AC adapter and battery pack before commencing any of the procedures.
Chapter 4 Replacement Procedures Disassembly Procedure Three main types of cable connector are used. Pressure plate connector Spring connector Normal pin connector When disconnecting a pressure plate connector, lift up the tag on one side of the plastic pressure plate on the connector and pull the cab le out from the connect or.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) Assembly Procedure After the computer has been disassembled and th e part that caused the fault has been repaired or replaced, the computer must be reassem bled.
Chapter 4 Replacement Procedures Screw Tightening Torque Use the following torque when tightening screws. CAUTION : Overtightening may damage screws or parts. Undertightening may allow screws to loosen (and possibly fall ou t) causing a short circuit or other damage.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) Screw Notation To make maintenance of the co mputer easier, markings of the kinds of the screws including the types and lengths are i ndicated on the computer body.
Chapter 4 Replacement Procedures 4.2 Battery Pack Removing the battery pack The following describes the procedure for rem o ving the battery pack (See Figure 4-2-1). CAUTION: Take care not to short circuit the te rminals when removing the battery pack.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) NOTE : Dispose of the used battery pack in a ccordance with the laws and ordinances of your local authority. Installing the battery pack The following describes the procedure for inst alling the battery pack (See Figure 4-2-2).
Chapter 4 Replacement Procedures LATCH 2 Figure 4-2-2 Install the battery pack Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ).
Chapter 4 Replacement Procedures 4.3 HDD/SSD Removing a HDD/SSD-H9.5mm The following describes the procedure for re moving the HDD/SSD (See Figure 4-3-1 to 4-3- 3). CAUTION: Take care not to press on the top or bottom of a HDD/SSD. Pressure may cause data loss or damage to the device.
Chapter 4 Replacement Procedures CAUTION: When a HDD/SSD is installed, they ar e installed in the position as the following figure. Figure 4-3-2 Remove HDD/SSD assembly Satellite L640/L645, Satellite .
Chapter 4 Replacement Procedures 5. Remove the following screws securing the HDD/SSD holder and rem ove the HDD/SSD holder . M3.0 3.0B FLAT BIND screw x2 Figure 4-3-3 Remove HDD/SSD Installing HDD/SSD-H9.5mm The following describes the procedure for installing the main HDD/SSD.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 4.4 Memory Module CAUTION: The power of the computer must be turned off when you remove a memory module. Remove a memory module with the power on risks damaging the module or the computer itself.
Chapter 4 Replacement Procedures Figure 4-4-1 Remove memory slot cover Figure 4-4-2 Remove a memory module Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ).
Chapter 4 Replacement Procedures Installing a memory module To install a memory module, confirm that the com puter is in boot mode. Then perform the following procedure (See Figure 4-4-3). 1. Insert a memory module into the connector of the com puter slantwise (term inal side first) and press it to connect firmly.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 4.5 Keyboard Removing the keyboard The following describes the procedure for rem ovi ng the keyboard (See Fi gure 4-5-1 to 4-5-2).
Chapter 4 Replacement Procedures Figure 4-5-1 Remove 2 screws for KB Holder Figure 4-5-2 Remove 3 screws for Keyboard Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ).
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) Installing the keyboard The following describes the procedure for installing the keyboard. 1. Connect the keyboard flexible cable to the connector on the mother board.
Chapter 4 Replacement Procedures 4.6 Wireless LAN Card Removing a Wireless LAN card The following describes the procedure for re m oving a Wireless LAN card (See Figure 4-6-1 to 4-6-2). 1. Remove the screw of wireless LAN card. M2x 5.0B BIND screw x2 2.
Chapter 4 Replacement Procedures Figure 4-6-2 Remove a wireless LAN card Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ).
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) Installing a Wireless LAN card The following describes the procedure for installing a W ireless LAN card.
Chapter 4 Replacement Procedures 4.7 3G Module Card Removing 3G module card The following describes the procedure for rem oving a 3G module card (See Figure 4-7-1 to 4-7-2). 1. Remove screws of 3G module card. M2x 5 BIND screw x2 2. Disconnect the 3G module antenna cable from the connectors on a 3G module card 3.
Chapter 4 Replacement Procedures Figure 4-7-2 Remove a 3G module card Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ).
Chapter 4 Replacement Procedures Installing a 3G module card The following describes the procedure for installing a 3G m odule card. (See Figure 4- 7-3) 1. Insert a 3G module card terminals slantwise into the connector on the mother board and press a 3G module card and lock the secure screws.
Chapter 4 Replacement Procedures 4 4.8 Display Assembly Removing the display assembly The following describes the procedure for rem o ving the display assembly (See Figure 4-8-1 to 4-8-7). 1. Close the display and turn the computer upside down. 2. Remove the battery pack (See Figure 4-2-1) 3.
Chapter 4 Replacement Procedures Figure 4-8-2 Remove the screws (from bottom side) 5. Disassemble KB Holder and KB screws (See Figure 4-5-1) 6. Remove the screws from the top side and remove the cover.
Chapter 4 Replacement Procedures 7. Disconnect the FFC and cables. 8. Disassembly TOP cover assembly 9. Pull out the wireless LAN antenna from the guide with two hands. Figure 4-8-4 Remove the Wireless Antenna 10. Pull out the LCD cables from the guide of mother board.
Chapter 4 Replacement Procedures Figure 4-8-5 Remove the LCD cable from mother board 11. Pull out the LCD cables from the guide of LCD panel. Figure 4-8-6 Remove the LCD cable from LCD panel Opening the display to 135degree, keeping disp lay side by hand and remo ve the hinge screw.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 4-30 12. Remove the display assembly with two hands holding from the BASE cover assembly.
Chapter 4 Replacement Procedures Installing the display assembly The following describes the procedure for inst alling the display assembly. (See from Figure 4-8-8 to 4-8-10) 1. Inserting the pole of hin ge to the hole of hinge assembly, set the display assembly with hands on the base assembly.
Chapter 4 Replacement Procedures Figure 4-8-9 Connecting LCD harness to the mother board 4. Arrange the wireless antenna cables along th e guide (front) and secure them with guide. 5. Pass the cables to the back of computer through the slot . 6. Arrange the Wireless LAN antenna along the guide and contact with the connector with hands.
Chapter 4 Replacement Procedures 4.9 Top Cover Assembly Removing the Top cover assembly The following describes the procedure for rem o ving the Top cover assembly (See Figure 4-9- 1 to 4-9-5). 1. Turn over the computer and open the door. 2. Remove memory slot cover.
Chapter 4 Replacement Procedures 5. Remove the following screws securing the Top cover assembly from the front of computer. Pull up and remove the Top cover assembly from the Base cover assembly . M2.0 5.0 FLAT BIND screw Back x5 M2.0X3.0 FLAT BIND screw Back x2 Figure 4-9-2 Remove the screws (front) and Top cover assembly 6.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 4-35 Installing the Top cover assembly The following describes the procedure fo r installing the Top cover assembly. 1. Install the Top cover assembly to the Base cover assem bly.
Chapter 4 Replacement Procedures 4.10 Touch Pad Removing the touch pad The following describes the procedure for removing the touch pad (See Figure 4-10-1 to 4- 10-3). 1. Peel off the glass tape and disconnect the touch pad cable, touch pad board cable from the connector on the touch pad.
Chapter 4 Replacement Procedures Figure 4-10-2 Loose the screws Figure 4-10-3 Remove the touchpad and touchpad board Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 4-.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 4-38 Installing the touch pad The following describes the procedure for installing the touch pad. 1. Peel off the separator covering on the sensor portion of a new touch pad.
Chapter 4 Replacement Procedures 4.11 I/O Board The following describes for removing the I/O Board (See Figure 4-11-1). Removing the I/O Board 1. Pull out the I/O Board FFC from I/O board connector. 2. Loose the below screws and then incline pull out I/O Board.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 4-40 Installing the I/O Board The following describes fo r installing the I/O Board 1. Fix the below screws then incline insert in I/O Board M2.
Chapter 4 Replacement Procedures 4.12 Mother Board CAUTION: 1. when handling the mother board, always hold by the edges. Do not touch the printed circuit face. 2. If replacing with a new mother board then should use T&D software which is describing in the Chapter3.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 42 Installing the mother board The following describes the procedure for installing the mother board. 1. Secure the mother board with the following screws .
Chapter 4 Replacement Procedures Removing RTC battery The following describes the procedure for rem o ving the RTC battery unit (See Figure 4-12-2 to 4-12-3). 1. Pull the away the socket of RTC battery a nd use a clam p to hold RTC battery tightly. 2.
Chapter 4 Replacement Procedures Figure 4-12-3 Remove the RTC battery-step_2 Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 44.
Chapter 4 Replacement Procedures Installing RTC battery The following describes the procedure for installing the RTC battery unit (See Figure 4-12-4). 1.
Chapter 4 Replacement Procedures 4.13 CPU Heat Sink Removing the CPU heat sink The following describes the procedure for re m oving the CPU heat sink (See Figure 4-13-1). 1. Disconnect the Heat sink cable from the connector on the mother board 2. Remove the following screws securing the heat sink holder along 1 to 3.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 4 7 Installing the CPU heat sink The following describes the procedure for installing the CPU heat sink 1. Secure the following screws securing the heat sink holder along 1 to 3.
Chapter 4 Replacement Procedures 4.14 LCD unit Removing the LCD unit The following describes the procedure for re m oving the LCD unit (See Figure 4-14-1 to 4- 14-3). 1. Remove Screw Mylar cover 2. Remove the following screws securing the display mask M 2.
Chapter 4 Replacement Procedures M2.5x5.0 4pcs Figure 4-14-2 Remove the LCD unit Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08) 49.
Chapter 4 Replacement Procedures 7. Remove the following screws securing the LCD support (LCD unit side) and rem ove the hinge from the LCD unit. M2.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 51 Installing the LCD unit The following describes the procedure for installing the LCD unit. Install the LCD supports (LCD unit side) and hi nge to the LCD and secure them with the following screws .
Chapter 4 Replacement Procedures 4.15 Web Camera module Removing Web Camera module The following describes the procedure for removing the Web Camera m odule. (See Figure 4-15-1 to 4-15-2). 1. Pull off the connect or of Web Cam era module. 2. Peel off the glue of Web Camera m odule.
Chapter 4 Replacement Procedures Peel off the glue of Web Camera Figure 4-15-2 Peel off the glue of Web Camera module Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 5.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 54 Installing Web Camera module The following describes the procedure for installing the W eb Camera module. 1. Pull in the glue of Web Camera Module.
Chapter 4 Replacement Procedures 4.16 Application for Thermal pad and grease on CPU, North Bridge, V-ram, chock and VGA (See Figure 4-16-1) Ⅰ .The thermal pad and grease on CPU, North Bridge, V-ram,.
Chapter 4 Replacement Procedures Figure 4-16-1 Intel &AMD thermal pad and gr ease on CPU, North Br idge, V-ram, chock and VGA A000070000 JXSTD010010 CPU TIM 7762 16*26*(JXSTD010.,3A) A000070010 JXSTD015010 CHOCK TIM XR-HL 10*10*0.8 (JXSTD015.,3A) A000070020 JXSTD016010 CHOCK TIM XR-HL 10*10*1.
Chapter 4 Replacement Procedures 4.17 Speaker Box Removing Speaker Box The following describes the procedure for re moving Speaker Box. (See Figure 4-17-1 to 4- 17-3). 1. Remove the following screws securing Speaker Box. M2.0 3.0 screw x 4 2. Removing the Speaker Box.
Chapter 4 Replacement Procedures M2.0 3.0 2pcs Figure 4-17-2Removing the securi ng screws at right side Removing the Speaker box Removing the Speaker box Figure 4-17-3 Removing the Speaker Box Sat.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 59 Installing Speaker Box The following describes the proced ure for installing Speaker Box. 1. Installing the Speaker Box. 2. Securing Speaker Box of following screw s .
Chapter 4 Replacement Procedures 4.18 Optical Disc Drive and ODD Bezel The following describes for removing the Optic al Disc Drive and ODD Bezel (See Figure 4- 18-1 to Figure 4-18-4). Removing the Optical Disc Drive and ODD Bezel 1. Open RAM Door and rem ove memory slot cover Figure 4-18-1 Remove memory slot cover 2.
Chapter 4 Replacement Procedures 3. Pull out ODD of the BASE cover assembly Figure 4-18-3 Remove the ODD 4. First pull out the ODD Bezel at the top side and then pull out ODD Bezel at the bottom side. NOTE : When removing the ODD Bezel, make sure do not broken ODD Bezel.
Chapter 4 Replacement Procedures Installing the Optical Di sc Drive and ODD Bezel The following describes for installing the Optic al Disc Drive and ODD Bezel (See Figure 4- 18-5 to Figure 4-18-8). 1. Install the ODD Bezel. Figure 4-18-5 Installing the ODD Bezel 2.
Chapter 4 Replacement Procedures Figure 4-18-7 Securing screw on ODD Bezel 4. Fix screws then insert RAM DOOR . Figure 4-18-8 Securing the screws on RAM Door Satellite L640/L645, Satellite Pro L640/Pr.
Chapter 4 Replacement Procedures 4.19 BT Module Removing Bluetooth module The following describes the procedure for re moving a BT module (See Figure 4-19-1 to 4- 19-2). 1 . Disconnect the BT cable from the connectors on mother board. 2 . .Remove Bluetooth module from the TOP cover assembly.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 65 Installing Bluetooth module The following describes the procedure for installing a Bluetooth module. 1 . Insert Bluetooth module te rm inals into the connector on mother board.
Chapter 4 Replacement Procedures 4.20 Mode m Removing Modem The following describes the procedure fo r rem oving Modem (See Figure 4-20-1). 1. Disconnect the Modem cable from the Modem.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 6 7 Installing Modem The following describes the procedure for installing Modem. 1. Lock the Modem secure screws on the mother board. 2. Insert Modem cable terminals slantwise into the connector on Modem .
Chapter 4 Replacement Procedures 4.21 Power Board Removing Power Board The following describes the procedure for rem oving Power Board (See Figure 4-21-1). 1. Disconnect the Power Board from the connectors on mother board. 1. Remove Power Board from the connector on the Base cover assem bly.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 69 Installing Power Board The following describes the procedure for installing Power Board. 1 . Insert Power cable terminals into the connector on m other board.
Chapter 4 Replacement Procedures 4.22 SIM Board Removing SIM Board The following describes the procedure for rem oving SIM Board (See Figure 4-22-1). 1. Disconnect the SIM Board FFC from the connectors on mother board. 2. Remove the screws of SIM Board.
Chapter 4 Replacement Procedures Satellite L640/L645, Satellite Pro L640/Pro L645 Ma in tenance Manual (960-Q08 ) 71 Installing SIM Board The following describes the procedure for installing SIM Board. 1 . Insert SIM Board FFC terminals into the co nnector on mother board.
Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Appendices.
Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Appendix Contents Appendix A Handling the LCD Module ............................................................................. 1 Appendix B Board Layout .
Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) C.18 CN18 External MIC Connector ........................................................................ 8 C.19 CN19 SATA ODD Connector ..................
Handling the LCD Module Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged duri ng assembly or disassembly.
Handling the LCD Module 3. If the panel’s surface gets fingerprint or dus t, put on gloves and wipe it with static electricity cloth. If it is still d irty, drop some cleaning alcoho l on the surface and wipe it again. If the surface is much more fingerprint or dust, w e recommend a CRT cleaning agent.
Handling the LCD Module 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the m odule, so guard against damage from electrostatic discharge.
Handling the LCD Module Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08).
Handling the LCD Module 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage.
Handling the LCD Module 10. If you transport the module, do not use p acking material that contains epoxy resin (amine) or silicon glue (alcohol or oxide).
Board Layout Appendix B Appendix B Board Layout B.1 System Board CN3 CN2 CN1 CN4 U4 U5 CN5 CN6 CN7 U8 JSIM1 U11 CN8 U10 U13 U14 MR1 LED1 LED3 LED5 LED2 LED4 LED6 Figure B-1-1 System board lay out – .
Board Layout PCN1 CN10 CN9 CN11 PCN2 U15 CN12 JDIM1 JDIM2 CN13 U16 U17 CN14 U21 CN15 CN16 CN17 CN21 CN18 CN19 CN20 Figure B-1-2 System board la yout –Discrete M/B (Back) Satellite L600/L640/L64 5, S.
Board Layout Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) NUM Location Function (01) CN1 Keyboard CONN (02) CN2 Power/B CONN (03) CN3 LVDS CONN (04) .
Board Layout Satellite L600/L640/L64 5, Satelli te Pro L600/Pro L640/Pro L64 5 Maintenance Manua l (960-Q08) (27) U4 LAN IC (28) U5 LAN Transformer (29) U8 HDMI Level Shif t IC (just on UMA M/B) (30) .
Board Layout B.2 Touch Pad Board <Front layout> SW1 SW2 Figure B-2-1 T ouch Pad board layout (Front) NUM Location Function (01) SW1 Mouse Button Left key (02) SW2 Mouse Button Right key Table B-.
Board Layout B.3 TP ON-OFF Board <Front layout> SW1 Figure B-3-1 TP ON-OFF Board layout (Front) NUM Location Function (01) SW1 TP ON-OFF Switch Table B-3-2 TP ON-OFF Board switch <Back layout.
Board Layout B.4 CRT/USB Board <Front layout> U1 D1 F1 CN11 Figure B-4-1 CRT/USB Board layout (Front) NUM Location Function (01) CN11 CRT to M/B CONN (02) D1 CRT Port Current Opposite Protect Di.
Board Layout <Back layout> CN1 D4 D3 D2 CN3 U2 Figure B-4-3 CRT/USB Board layout (Back) NUM Location Function (01) CN1 CRT CONN (02) CN3 USB CONN (03) U2 USB Pow er IC (04) D2 USB DAT A- ESD Dio.
Board Layout B.5 SIM (3G) Board <Front layout> CN1 Figure B-5-1 SIM (3G) Board layout (Front) NUM Location Function (01) CN1 SIM(3G)/B to M/B CONN Table B-5-2 SIM (3G) Board connector <Back l.
Board Layout B.6 Modem Board <Front layout> MJ2 CN1 MU1 Figure B-5-1 Modem Board layout (Front) NUM Location Function (01) CN1 Modem Board to M/B CONN (02) MJ2 Modem Board to RJ11 CONN (03) MU1 .
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Appendix C Pin Assignment CN 1 Keyboard Connector PIN No.
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) CN3 LCD Panel Connector PIN No. Signal name I/O PIN No.
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 15 GND --- 16 USBP8+ I/O 17 USBP8- I/O 18 GND --- 19 USBOC#8 I 20 USB_EN1# O 21 +5VPCU --- 22 +5VPCU --- 23 +5VPCU --- 24 +5VPCU --- CN5 Speaker Connector PIN No.
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) CN9 FAN Connector PIN No. Signal name I/O PIN No. Signal name I/O 1 TH_FAN_POWER1 --- 2 GND --- 3 FANSIG1 I CN10 Modem Connector PIN No. Signal name I/O PIN No.
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) CN12 LAN RJ45 Connector PIN No. Signal name I/O PIN No.
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) CN14 E-SATA Connector PIN No. Signal name I/O PIN No.
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 15 GND --- 16 LFRAME#_PCIE I/O 17 NC --- 18 GND --- 19 NC --- 20 RF_EN O 21 GND --- 22 PLTRST# O 23 PCIE_RXN5 I 24 +3V_S5 --- 25 PCIE_RXP5 I 26 GND --- 27 GND --- 28 +1.
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 11 CLK_PCIE_3G# O 12 UIM_CLK O 13 CLK_PCIE_3G O 14 UIM_RST O 15 GND --- 16 UIM_VPP --- 17 NC --- 18 GND --- 19 NC --- 20 3G_EN O 21 GND --- 22 PLTRST# O 23 PCIE_RXN3 I 24 +3V_3G --- 25 PCIE_RXP3 I 26 GND --- 27 GND --- 28 +1.
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 7 GND --- 8 NC --- 9 GND --- 10 NC --- CN19 SATA ODD Connector PIN No.
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 7 XD_D7/MS_D3 I/O 8 MS_ INS# I 9 GND --- 10 XD_D2/MS_D2 I/O 11 VCC_XD --- 12 SD_DAT0/XD_D.
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 3 GND --- 4 UIM_DATA I/O 5 GND --- 6 UIM_RST O 7 UIM_VPP --- 8 UIM_PWR --- 9 NC --- 10 USBP4+ I/O 11 USBP4- I/O 12 GND --- 13 GND --- 14 GND --- JDIM1 DDRIII Connector PIN No.
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 37 GND I/O 38 GND I/O 39 M_A_DQ16 --- 40 M_A_DQ21 --- 41 M_A_DQ17 --- 42 M_A_DQ20 --- 43 .
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 91 M_A_A5 O 92 M_A_A4 O 93 +1.5VSUS --- 94 +1.5VSUS --- 95 M_A_A3 O 96 M_A_A2 O 97 M_A_A1 O 98 M_A_A0 O 99 +1.5VSUS --- 100 +1.5VSUS --- 101 M_A_CLKP0 O 1 02 M_A_CLKP1 O 103 M_A_CLKN0 O 104 M_A_ CLKN1 O 105 +1.
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 145 GND --- 146 M_A_DQ40 I/O 147 M_A_DQ45 I/O 148 M_A_DQ41 I/O 149 M_A_DQ44 I/O 150 GND -.
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 199 +3V --- 200 CGDAT_SMB I/O 201 DIMM0_SA1 I/O 202 CGCLK_SMB O 203 +SMDDR_VTERM --- 204 +SMDDR_VTERM --- 205 GND --- 206 GND --- 207 NC --- 208 NC --- JDIM2 DDRIII Connector PIN No.
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 39 M_B_DQ20 --- 40 M_B_DQ17 --- 41 M_B_DQ21 --- 42 M_B_DQ16 --- 43 GND I/O 44 GND I/O 45 .
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 93 +1.5VSUS --- 94 +1.5VSUS --- 95 M_B_A3 O 96 M_B_A2 O 97 M_B_A1 O 98 M_B_A0 O 99 +1.5VSUS --- 100 +1.5VSUS --- 101 M_B_CLKP0 O 102 M_B_CLKP1 O 103 M_B_CLKN0 O 104 M_B_ CLKN1 O 105 +1.
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 147 M_B_DQ40 I/O 148 M_B_DQ44 I/O 149 M_B_DQ41 I/O 150 GND --- 151 GND --- 152 M_B_DQSN5 .
Pin Assignment Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) 201 DIMM1_SA1 I/O 202 CGCLK_SMB O 203 +SMDDR_VTERM --- 204 +SMDDR_VTERM --- 205 GND --- 2.
Display Codes Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Appendix. D Appendix D Display Codes D.1 Display Codes Code set 1 Code set 2 Cap No.
Display Codes Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Code set 1 Code set 2 Cap No. Keytop Make Break Make Bre ak Note 29 | 2B AB 5D F0 5D *5 3.
Display Codes Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Code set 1 Code set 2 Cap No. Keytop Make Break Make Bre ak Note 58 Ctrl 1D 9D 14 F0 14 *3.
Display Codes Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Code set 1 Code set 2 Cap No. Keytop Make Break Make Bre ak Note 122 F11 57 D7 78 F0 78 *3.
Display Codes Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Code set 1 Code set 2 Cap No. Key top Make Break Make Break 55 / E0 AA E0 35 E0 B5 E0 2A E.
Display Codes Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Code set 1 Code set 2 Cap No. Key top Make Break Make Brea k 75 INS E0 2A E0 52 E0 D2 E0 A.
Display Codes Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break 09 8 (8) 48 C8 75 F0 75 10 9 (9.
Display Codes Satellite L600/L640/L64 5, Satellite Pro L600/Pro L640 /Pro L645 Mainten an ce Manual (960-Q08) Code set 1 Code set 2 Key top Shift Make Make Pause Co m mo n * E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl* E0 46 E0 C6 E0 7E E0 F0 7E Table D-1-7 No.
Keyboard Layout Appendix E Keyboard Layout 1. United Status (US) K eyboard Figure E-1-1 US keyboard 2. United Kingdom (UK) K eyboard Figure E-2-1 UK keyboard _____________ ____________ ____________ __.
Keyboard Layout 3. Japan K eyboard Figure E-3-1 Japan keyboard _____________ ____________ ____________ ____________ ____________ _______________ ____________ ____________ ____ Satellite L600/L640/L645.
Wiring Diagrams Appendix F Appendix F Wiring Diagrams F.1 RGB Monitor ID Wraparound connector ( 1 ) +5V (2) CRT_DDCLK (3) CRT_DDD A T A (4) +3V (5) CR T_VSYNC (6) CRT_HSY NC (7) GND (8) RED_L (9) GND .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Toshiba L645 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Toshiba L645 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Toshiba L645 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Toshiba L645 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Toshiba L645, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Toshiba L645.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Toshiba L645. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Toshiba L645 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.