Manuale d’uso / di manutenzione del prodotto 40E220U del fabbricante Toshiba
Vai alla pagina of 130
GMA30001101 1 12/11 Note: T o display a High Definition picture, the TV must be receiving a High Definition signal (such as an over- the-air High Defin ition TV broadcast, a High Definition digit al cable program, or a High Definition digital satellite program).
2 5.375 x 8.375 ver 2.3 Dear Customer , Thank you for purchasing this T oshiba LCD TV . This manual will help you use the many exciting features of your new LCD TV .
3 5.375 x 8.375 ver 2.3 Important Safety Instructions 1) Read these instructions . 2) Keep these instructions . 3) Heed all war nings . 4) Follow all instru ctions . 5) Do not use this apparatus near water . 6) Clean only with dry cloth . 7) Do not block any ventilation openings .
4 5.375 x 8.375 ver 2.3 24) When selecting a location for the TV , • NEVER allow any part of th e TV to hang over the edge of the suppor ting furniture, • NEVER place the TV on tall fu rniture (fo.
5 5.375 x 8.375 ver 2.3 38) During a lightning storm, do not touch the connecting cabl es or prod uct. 39) For added protecti on of your TV from lightning and power surges, always unplug t he power cord and disconnect the antenn a from the TV if you leave the TV unattended or unused for long periods of time.
6 5.375 x 8.375 ver 2.3 7) VESA Mounting Pat tern Removing the Pedest al St and 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket.
7 5.375 x 8.375 ver 2.3 FCC Declaration of Conformity Compliance Statement (Part 15): T oshiba 32C120U , 40E220U T elevision models comply with Part 15 of the FCC rules.
8 5.375 x 8.375 ver 2.3 Notice The information contained in this ma nual, including but not limited to any product speci fications, is subject to change without notice.
9 5.375 x 8.375 v er 2.3 Contents Chapter 1: Introduction ... ......................... ..................... ............. 15 Features ..................................................................16 Overview of installation, setup, and use .....
10 Contents 5.375 x 8.375 v er 2.3 Connecting a DVD player with ColorStream ® (component video), a VCR, and a satellite receiver .............................................................25 Connecting an HDMI ® or DVI device to the HDMI ® input .
11 Contents 5.375 x 8.375 v er 2.3 Chapter 6: Using the TV’ s features .............. ............................. 54 Selecting the video input source .............................54 Labeling the video input sources ............................56 Tuning channels using the Channel Browser™ .
12 Contents 5.375 x 8.375 v er 2.3 Adjusting the audio ................................................. 76 Muting the sound ..............................................76 Using the digital audio selector ......................... 76 Selecting stereo/SAP broadcasts .
13 Contents 5.375 x 8.375 v er 2.3 Automatic Power Down ........................................ 100 No Signal Power Down ......................................... 100 Using REGZA-LINK ® .............................................101 REGZA-LINK ® playback device (DVD player, etc.
14 Contents 5.375 x 8.375 v er 2.3 Appendix A: Specifications ...................................................... 118 Television system .................................................118 Channel coverage ..........................................
15 Chapter 1 Introduction Safety icons This manual contains safety instructions that must be observed to a void potential hazards that could result in personal injuri es, damage to your equipment, or loss of data.
16 Introd uctio n Fe a t u r e s Features The follo wing are just a few of th e many e xciti ng features of your new T o shiba TV : ❖ Integrated digital tu ning (8VSB A TSC and QAM) — Eliminates the n eed for a separate d igital conv erter set-top box (in most cases).
17 Introduction Overview of installation, setup, and use ❖ Place the TV in a location wher e light does not reflect on the screen. ❖ Place the TV far enough from walls and other objects to allow proper v entilation. Inadequate ventilation may cause ov erheati ng, which will damage the TV .
18 Introd uctio n TV fr ont and side panel contr ols and conn ections TV front and side panel controls and connections (Sample Illustration) F r o nt and side pa nel contr ol s and connections 1 Remote sensor (embedded) —Point the remote control toward this remote senso r .
19 Introduction TV bac k panel connections 11 USB port —Used to access JPEG or MP 3 files, or to update the TV’ s fi rmware. TV back panel connections For e xplanations of cable types and connections, see “Overvie w of cable types” on page 21 .
20 Introd uctio n TV bac k panel connections 5 Digital A udio Out —Optical audio output in Dolby ® Digital or PCM (pulse-code modulation) form at for connecting an external Dolby Digital decoder , amplifier , or home theater system with optical audio input.
21 Chapter 2 Connecting Y our TV Overview of cable types Before purchasing cables, know the connector types your de vices require. Y ou can purchase cables from most st ores that sell audio/video devices.
22 Connecting Y our TV Overview of cable types Standard A/V cables (red/white/yellow) (Sample Illustration) Standar d A V cabl es Standard A/V cables (composite video) usually come in sets of three, and connects wi th vide o de vices with analog audio and composite video outpu t.
23 Connecting Y our TV Overview of cable types Optical audio cable (Sample Illustration) Optical audio cable Optical audio cable connects receiv ers with Dolby ® Digital or PCM (pulse-code modulation ) optical audio input to the TV’ s Digital Au d i o O u t terminal, see “Connecting a digital audio system” on page 30 .
24 Connecting Y our TV Connecting a VCR, antenna, cable TV , or camcor der Connecting a VCR, antenna, cable TV , or camcorder (Sample Illustration) Connecting to a VCR, ant enna, cable TV , or camcor .
25 Connecting Y our TV Connecting a D VD player with ColorStream ® (component The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability .
26 Connecting Y our TV Connecting an HDMI® or DVI device to the HDMI® input ❖ If your D VD player does no t hav e component video, connect a standard A/V cable to the A UDIO/VIDEO terminal. If your D VD play er has HDMI ® video, see “Connecting an HDMI® or DVI de vice to the HDM I® input” on page 26 .
27 Connecting Y our TV Connecting an HDMI® or D VI device to the HDMI® input EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being st andardized for reception of high-definition video signals.
28 Connecting Y our TV Connecting an HDMI® or DVI device to the HDMI® input T o view the HDMI ® device video : Select HDMI 1 or HDMI 2 vi deo input source on the TV . Press the INPUT button on the remote control. For more information, see “Selecting the video input source” on page 54 .
29 Connecting Y our TV REGZA-LINK® connection REGZA-LINK ® connection Y ou can control the basic functions of connected audio /video devices using the TV’ s remote control if you connect a REGZA-LINK ® compatible audio recei ver or playback de vice.
30 Connecting Y our TV Connecting a digital audio system ❖ This feature is limited to models incor porating T oshiba’ s REGZA-LINK ® . Howe ver , T oshiba is not liable for those operations. Refer to the individual instruction manuals for compatibility informat ion.
31 Connecting Y our TV Connecting a digital audio system 3 Press the ( / arro w ) buttons to highlight A udio Setup , and then press the ENTER button. (Sample Image) Audio Setup scr een 4 Press the ( / arro w) buttons to select Optical Output Fo r m a t .
32 Connecting Y our TV Connecting a computer Connecting a computer W ith either the PC IN or HDMI ® connection, you can view your computer’ s display on the TV and hear the sound from the TV’ s speakers.
33 Connecting Y our TV Connecting a computer Other formats or non-stand ard signals will not be displayed correctly . T o display the optimum pict ure, us e the computer setting feature, see “Using the PC settings feature” on page 90 . ❖ The PC audio input terminals on the TV are shared with the HDMI 1 analog audio input terminals.
34 Connecting Y our TV Connecting a computer (Sample Illustration) Connectio ns to HDMI ® terminal The supported signal formats are VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60H z), 720p (60Hz), 108 0i (60Hz), and 1080p (24Hz/60Hz). For signal specifications, see “ Acceptable signal formats for PC IN, HDMI®” on page 12 1 .
35 Chapter 3 Using the Remote Control Installing batteries T o install batteries: 1 Remov e the battery cover from th e back of the remote control. (Sample Illustration) Removing the r emot e back cover 2 Insert the batteries, corresponding to the (+) and (-) markings on the battery co mpartment.
36 Using the Remote Control Remote contr ol effective range ❖ Be sure to use AAA size batteries. ❖ Dispose of batteries in a designated disposal area. ❖ Always consider the environment when disposing of batteries. Always follow applicable laws and regulations.
37 Using the Remote Control Learning about the remote contr ol Learning about the remote control The b uttons used for operating the TV are described here. F or the REGZA-LINK ® remote control functio ns, see “REGZA-L INK® playback device (D VD player , etc.
38 Using the Remote Control Learning about the r e mote contr ol 3 The PIC MODE button selects the picture mode, see “Selecting the picture mode” on page 71 . 4 The INPUT b u tton selects the v ideo input source, see “Selecting the video input source” on page 54 .
39 Using the Remote Control Learning about the remote contr ol 19 The Arr ow b uttons ( ) open the Channel Browser™ and tune to the previous/next channe l in the channel history when TV programming is on-screen. See “T un ing channels using th e Channel Browser™” on page 58 .
40 Chapter 4 Menu Layout and Navigation Main menu layout The tables below and on the ne xt pages provide a quick overvie w of your TV’ s menu system. T o open the Installation menu s (illustrated below), press MENU on the remote control or TV control panel.
41 Menu Layout and Navigation Main menu layout Preferences CC Selector Launches the temporary CC Selector Base CC Mode Off/CC1/CC2/CC3/CC4/T1/T2/T3/T4 Digital CC Settings Opens the Digital CC Setup me.
42 Menu Layout and Navigation Menu setup/installation/layout Menu setup/installation/layout The Installation menu contains th e T errestrial and System Status menus. T o open the Installation m enu, press the MENU button on the remote control or TV control panel, open the Setup menu, select Installation , and then press the ENTER b utton.
43 Menu Layout and Navigation Navigating the menu system 3 Press the ENTER b utton to save your menu settings or select a highlighted item. A highlighted menu item appears in a different color in the menu.
44 Chapter 5 Setting up your TV Initial Setup When you f irst turn on or reset the TV , the Init ial Setup windo w will appear . 1 In the M enu Langua ge field, press the ( / arro w) buttons to select your preferred language. 2 Press the ( / arrow) b ut tons to select Ti me Z on e Se t u p .
45 Setting up your TV Initial Setup Menu language Y ou can choose from three dif ferent menu language settings (English, Français, and Español) fo r the on-screen display of menus and messages. T o select the me nu language: 1 Press t h e MENU button to open the Pr eferences menu, and highlight Menu La nguage .
46 Setting up you r TV Storing channels in memory (optional) A new set of Installation menu icons appears. 3 Open the T errestrial me nu, highlight I nput Conf iguration , and then press the ENTER button.
47 Setting up your TV Storing channels in memory (optional) ❖ Y ou must set up the ANT/CABLE input source before programming channels. ❖ The automatic channel progr amming process will erase channels that were previously programmed into the TV’ s memory .
48 Setting up you r TV Setting channel skip 4 Open the T errestrial me nu, highlight Channel Pr ogram to open the Start Scan window , and then press the ENTER button to begin channel programming.
49 Setting up your TV Setting channel skip 2 Press the ( / arro w) buttons to select Channel Options , and then press t h e ENTER but t o n. The list of channels appears. (Sample Illustration) Li st of channels 3 Press the ( / arrow) b uttons to select a channel position to be skipped, and then press t he ENTER button.
50 Setting up you r TV Setting A V Input mode T o remov e encrypted channels from the channel memory: When you tune to an encrypted channel, the following message appears. (Sample Illustration) Removing an encrypted channel ❖ Press the 1 button while the message is displayed to remove the unnecessary channel from the channel list.
51 Setting up your TV V iewing the di gital signal meter 4 T o sav e the setting, highlight Done , and then press the ENTER button. Because the PC and HDMI1 inputs share the same set of ana log audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting.
52 Setting up you r TV Setting the time zone T o close the screen and retu rn to the T errestr ial menu: ❖ Highlight Done , and then press the ENTER b utton. T o return to normal viewing, press the EXIT button. Setting the time zone The T ime Zone setup allows you to specify the correc t time zone for your region.
53 Setting up your TV V iewing the system status Resetting Factory Defaults T o reset all settings and channels to their factory def ault values: 1 Press t h e M ENU button to open the Setup menu. 2 Highlight Installation , and then press the ENTER button.
54 Chapter 6 Using the TV’ s f e a t u r e s Selecting the video input source T o select the video input source to view: 1 Press t h e INPUT button on the remote control or TV control panel.
55 Using the TV’ s features Selecting the video input sour ce The current signal source displays in the top right corner of th e Input Selection screen.
56 Using the TV’ s features Labeling the video input sources ❖ When you select REGZA-LINK ® input sources from the pop-up window using the INPUT button, some REGZA-LINK ® devices may automatically turn on.
57 Using the TV’ s features Labeling the video input sources T o label the video inp ut sources: 1 Press t h e M ENU button and open the Prefer ences menu.
58 Using the TV’ s features T uning channels using the Chan nel Br owser™ Input labeling example: The screen belo w left shows the def ault Input Selection screen (with none of the inputs lab eled as a specific device).
59 Using the TV’ s features T uning channels using the Chan nel Br owser™ Favorites browser The Fa vorites Browser allows you to quickly set up a fa vorite channels/inputs list that is integrated into the Channel Browser™. T o add a fav orite channel/input: 1 T une to the channel or input .
60 Using the TV’ s features T uning channels using the Chan nel Br owser™ 5 Press the ( arrow) b utton to highlight Inputs List , and then press the ( / arrow) buttons to select On or Off . 6 Press the ( arrow) b utton to highlight Fa vorites List , and then press the ( / arro w) buttons to select On or Off .
61 Using the TV’ s features T uning channels using the Chan nel Br owser™ 3 Channel or input that is currentl y highlighted in the browser . 4 Channels stored in the History List.
62 Using the TV’ s features T uning channels using the Chan nel Br owser™ Adding and clearing channels and in puts in the History List Adding channels and inputs to the History List: As a channel or input is tuned, the Channel Browser™ adds it to the History Li st and displ ays it on th e right sid e of the Channe l Browser™.
63 Using the TV’ s features T uning channels using the Chan nel Br owser™ T uning d igital channels: ❖ Press the Channel Number (0–9 ) on the remote contr ol, followed by the 100 b utton, and then the sub-channel number . For e xam ple, to select digital channel 125-1, press 1, 2, 5, –, 1, and then press the ENTER button.
64 Using the TV’ s features Selecting the pictur e size The TV will return to the memorized channel one time only . Once you press the CH R TN b utton and then change channels again, the CH R T N memory will be cleared and the button will function as Channel Return, by switching back and forth between the last tw o channels that are tuned.
65 Using the TV’ s features Selecting the picture size Some of the picture sizes may not be available depending on the receiving signal format (those will be grayed out in the Picture Size screen). If you select a TheaterWide ® picture size, the top and bottom edges of the picture (including subtitles or captions) may be hidden.
66 Using the TV’ s features Selecting the pictur e size The center of the picture remains cl ose to its original propo rtion, but the left and right edges ar e stretched horizont ally to fill the screen. TheaterWide 2 This setting is f or viewing letter box programs.
67 Using the TV’ s features Selecting the picture size ❖ If recei ving a 1080i, 10 80p, 720p, 4 80i (HDMI ® ), or 480p (HDMI ® ) signal program, the video is scaled to display the entire picture within the borde rs of the screen (i.e. no ov er-scanning).
68 Using the TV’ s features Scr olling the Thea terW ide® pictur e (TheaterW ide 2 and 3 only) Dot by Dot This setting is for viewing VGA, SV GA, XGA, WXGA, and SXGA sources. (Sample Illustration) Pictur e si ze - Dot by Dot Dot by Dot is a non-scaling display .
69 Using the TV’ s features Using the A uto Aspect fe atur e 6 T o sav e the new settings, highlight Done , and then press the ENTER button. T o rev ert to the factory defaults, highlight Reset and then press the ENTER button. The adjustment range is from -5 to +10 .
70 Using the TV’ s features Selecting the cinema mode Selecting the cinema mode When you view a D VD (3: 2 pulldown processed) from a D VD player connected to the VIDEO , ColorStr eam HD (component video), or HDMI inputs on the TV , smoother motion can be obtained by setting the Cinema Mode to Film .
71 Using the TV’ s features Adjusting the pictur e Adjusting the picture Selecting the picture mode Y ou can select your desir ed picture settings from the modes described below . PC mode is available for HDMI ® and PC inputs only (grayed out for other input sources).
72 Using the TV’ s features Adjusting the pictur e 3 Press the ( / arrow) b uttons to sel ect the picture mode you prefer , and then press the ENTER button. (Sample Image) Mode selections scr een Adjusting the picture quality Y ou can adjust the picture quality (Contrast, Backlight, DynaLight™, Brightness, Color, T int, and Sharpness.
73 Using the TV’ s features Using closed captions 4 T o sav e the new settings, highlight Done , and then press the ENTER button. Y ou can use any of the picture modes (see “Selecting the picture mode” on page 71 ) as a starting point for adjusting the picture settin gs.
74 Using the TV’ s features Using closed captions T o view text, highlight T1 , T2 , T3 , or T4 . (Sample Illustration) Captions - text If text is not available in your area, a black rectangle may a ppear on screen. If this happens, set the Base CC Mode to Off.
75 Using the TV’ s features Using closed captions 4 T o sav e the new settings, highlight Done , and then press the ENTER button. T o re vert to the factory defaults, highlight Reset , and then press the ENTER button.
76 Using the TV’ s features Adjusting the audio 4 T o sav e the new settings, highlight Done , and then press the ENTER button. 5 Press the EXIT button. Adjusting the audio Muting the sound Press the MUTE button to partially reduce (1/2 M ute) or turn off (Mute) the sound.
77 Using the TV’ s features Adjusting the audio 2 Highlight Digital A udio Selector , and then press the ENTER button. (Sample Image) Sound menu - Digital Audio Selector selection 3 Press the ( / arrow) b uttons to select Au d i o , and then press the ( / arro w) buttons to select the desired service.
78 Using the TV’ s features Adjusting the audio T o listen to an alternate language on an A T SC digital station (if av ailable), high light the Language field in step 3 above, and then press the ( / arro w) buttons to select the language you prefer .
79 Using the TV’ s features Adjusting the audio Audyssey ABX™ Audyssey ABX™ technology uses sophisticated driv er analysis and low frequenc y monitoring to extend the range and bass of small speakers. T o turn on Audyssey ABX™: 1 Press the MENU button and open the Sound menu.
80 Using the TV’ s features Using the Loc ks menu Using the Dolby ® Digital Dynamic Range Control feature Y ou can furth er compress Dolby Digital and Dolby Digital Plus dynamic range, allowing you to switch from digital to analog broadcasts at the same dynamic range.
81 Using the TV’ s features Using the Locks menu 2 Press the ( arro w) button to display th e PIN code entry screen. The Lock System screen appear s if a PIN code has not been stored.
82 Using the TV’ s features Using par ental contr ols (for USA re gion) 3 Enter your four -digit PIN code, and then press the ENTER button. 4 Press the ( arro w) button to highlight New PIN Co de , and then press the ENTER button. 5 Press the Number buttons to enter a new four -digit code.
83 Using the TV’ s features Using par ental contr ols (for USA r e gion) (Sample Image) Loc ks menu screen for other r egions 6 Press the ( arro w) button to highlight Edit Rating Limits , and then press the ENTER button.
84 Using the TV’ s features Using par ental contr ols (for USA re gion) 4 Press the ( arro w) button to highlight Enable Rating Blocking . 5 Press the ( arro w) button to select On . 6 Press the ( arro w) button to highlight Edit Rating Limits , and then press the ENTER button.
85 Using the TV’ s features Using par ental contr ols (for USA r e gion) Rating system Independent rating system for broadcast ers: Independent rating system for movies: Ratings: Description and Con.
86 Using the TV’ s features Using par ental contr ols (for USA re gion) Indication other than rating system: If you place an “X” in the box next to “None” Rated, programs rated “None” or “Not Rated” will be blocked; Programs that do not provide any rating information will not be blocked.
87 Using the TV’ s features Using the input lock featur e T o temporaril y unlock the pro gram: 1 Press the MUTE button. 2 Enter your four -digit PIN code, and then press the ENTER button. If the correct code is entere d, the program lock mode is released and the normal picture appears.
88 Using the TV’ s features Locking c hannels 3 Press the ( / arrow) buttons to select Channel Options , and then press the ENTER button. The list of channels appears. (Sample Illustration) Channel options 4 Press the ( arrow) butt on, and then press the ( / a r r o w ) buttons to select a c hannel in the lock column.
89 Using the TV’ s features Locking c hannels T o cancel the GameTimer ® , select Off in step 3 above. T o deactiv ate the Input Lock once the GameT i mer ® has activ ated it: ❖ Set the Input Lock to Off , see “Using the input lock feature” on page 87 .
90 Using the TV’ s features Using the PC settings featur e T o unlock the control panel, select Off in Step 5 i n this section or press and hold the VO L U M E - button on the TV control panel for approximately 15 seconds until the v olume icon appears.
91 Using the TV’ s features Using the PC settings featur e The screen is disrupted momentarily while adjusting the PC settings. This is not a sign of malfunction. * The default settings and/or adjustment rang es may vary depending on the input signal format.
92 Using the TV’ s features Using the Media Player Using the Media Player Using Media Player with a USB device Y ou can enjoy photos or music contents stored on a USB storage device.
93 Using the TV’ s features Using the Media Player ❖ Gently insert the USB device into the port and do not remove while viewing Media Player . ❖ USB device: USB Mass Storage Class devic e (MSC) ❖ Connectivity is not guara nteed for all devices.
94 Using the TV’ s features Using the Media Player 2 Press the ( / arro w ) buttons to se lect Ye s , and then press the ENTER button. The Media Player menu appears. (If you select No, n othing happens.) (Sample Image) Media Play - open scr een ❖ The prompt will disappear after about 10 sec.
95 Using the TV’ s features Using the Media Player Viewing photo files There are three types of vie w mo des, multi v iew , single view , and slide show . Multi View This view allo ws you to search fo r photos in a grid format. These pictures are displayed using thum bnail data in each image file.
96 Using the TV’ s features Using the Media Player ❖ Press to rotate th e image 90° counterclockwi se. Press to rotate the image 90° clockwise. Slide show This view allo ws you to watch a slide show of the photos. In this mode, only files located in the se lected directory will be played.
97 Using the TV’ s features Using the Media Player 3 Press the ( / arrow) b uttons to select a file or folder . Y ou can use the CH Up/CH Down buttons to page up or down the music list when there are more f iles than will fit onto one screen. 4 Select the desired folder and press the ENTER button to mov e to the next layer .
98 Using the TV’ s features Using the Media Player Viewing photo files and playing music files at the same time While viewing photo f il es, you can listen to music from a list of av ailable files. 1 While viewing photos in the Single Vi e w or Slide Show mode, press MENU to open the Quick Menu .
99 Using the TV’ s features Setting the sleep timer Setting the sleep timer Y ou can set the sleep timer to turn off the TV after a set length of time (maximum of 12 hours). T o set the sleep timer using th e remote control: 1 Press the SLEEP button on the remote control to set the length of time until the TV turns off.
100 Using the TV’ s features Automatic P ower Down 3 Press the ( arro w) buttons to select On or Of f , and press EXIT . Automatic Power Down The TV can be configured to auto m atically turn itself off after 4 hours if you do not operate the TV ei ther from the remote control or the TV control panel.
101 Using the TV’ s features Using REGZA-LINK® 3 Press the ( / arro w) buttons to highlight the item you want to change, and press the ( / arro w) buttons to select On or Off . ❖ Default setting for this feature is On. ❖ A warning message will appear 1 minute before the TV turns off.
102 Using the TV’ s features Using REGZA-LINK® REGZA-LINK ® Player Control menu functions T o control the REGZA-LINK ® player from the menu: 1 Press MENU and open the Preferences menu. 2 Highlight REGZA-LINK Pla yer Control and press the ENTER button.
103 Using the TV’ s features Using REGZA-LINK® REGZA-LINK ® input source selection If a REGZA-LINK ® device with HDMI ® switching capabili ty (e.
104 Using the TV’ s features Displaying TV status information When you turn on the Audio Receiver , change its input s ource or adjust the sound volume, the sound will be output from the audio receiver’ s speakers even if TV Speakers has been se lected.
105 Using the TV’ s features Displaying TV status information ❖ Digital signal strength indicator (bar graph in lower right corner of box; for A TSC signals only ) ❖ Stereo, Mono, or SAP audio s.
106 Using the TV’ s features Understanding the last mode memory feature Understanding the last mode memor y feature If the A C power is cut off while you are vie wi ng the TV , the Last Mode Memory feature automatically turns on the TV wh en the A C po wer is resupplied.
107 Chapter 7 Using the TV’ s Advanced Features Using the advanced picture settings Dynamic Contrast Dynamic Contrast detects changes in picture quality that af fect the appearance of your contrast settings and then automatically adjusts the video.
108 Using the TV’ s Advanced Features Using the advanced picture settings 3 Press the ( / arrow) b uttons to select Dynami c Contrast . 4 Press the ( / arrow) b uttons to select High , Middle , Lo w or Off . Static Gamma The static gamma feature lets you ad just the lev els of black in the picture.
109 Using the TV’ s Advanced Features Using the advanced pictur e settings T o select the color temperature: 1 Press t h e MENU button to open the Pictur e menu . 2 Highlight Picture Settings , and then press the ENTER b utton. 3 Highlight Advanced Picture Settings , and then press the ENTER button.
110 Using the TV’ s Advanced Features Using the advanced picture settings 2 Highlight Noise Reduction , and then press the ENTER button. 3 In the CableClear field, select the desired setting. The av ailable selections are Off , Low , Middle , and High .
111 Using the TV’ s Advanced Features Using the advanced pictur e settings Game Mode Y ou can use the Game Mode featu re for shorter frame delays when playing a video game requiring sp lit-second timing between the on-screen display and input from the control ler (such as music creation and high-action games).
112 Chapter 8 T roubleshooting General troubleshooting Before calling a service technician, re vi e w this chapter or visit the T oshiba technical support W eb site at support.toshiba.com fo r possible causes/solutions fo r the problem you are experiencing.
113 T roubleshooting Pictur e pr oblems Other pr oblems. If your TV’ s problem is not addresse d in th is T roub leshooting section or the recommended solution has not worked, use the Reset F actory Defaults procedure, see “Resetting F actory Defaults” on page 53 .
114 T roubleshooting Pictur e pr oblems V ideo Input Selection problems. If the Input Selection window does not appear when you press INPUT on the remote control or TV , press INPUT a second time. This will cause a change to the next video input source and display the Input Selection window .
115 T roubleshooting Sound pr oblems Sound problems Check the antenna/cab le connections, see “Connecting a VCR, antenna, cable TV , or camcorder” on p age 24 . The station may be having broadcast dif ficulties. T ry another channel. The sound may be m uted.
116 T roubleshooting Closed caption pr o blems The Lock feature may ha ve block ed the channel. Unblock the channel, see “Locking channels” on pag e 87 .
117 T roubleshooting HDMI® pr oblems If sev eral devices are connected, the REGZA-LINK ® feature may not operate properly . Read the instruction manual fu rnished with the connected REGZA-LINK ® device.
118 5.375 x 8.375 ver 2.3 Appendix A Specifications ❖ These models comply with the specifications listed below . ❖ Designs and specifications are subject to change without notice. ❖ These models may not be compa tible with features and/or specifications that may be added in the future.
119 Specifications P ower sour ce 5.375 x 8.375 ver 2.3 Power source 120 V A C, 60 Hz Power maximum current Power consumption Audio power Speaker type Video/audio terminals Video/audio input 32C120U 1.6 A 40E220U 1.7 A 32C120U 1.6 A (maximum current) 0.
120 Specifications Dimensions 5.375 x 8.375 ver 2.3 ColorStream ® (component video) HD input HDMI ® input Digital audio output Optical type PC input 15-Pin D-sub Analog RGB Dimensions Mass (weight) V i deo Y : 1V(p-p), 75 ohm. PR: 1V(p-p), 75 ohm. PB: 0.
121 Specifications Supplied accessories 5.375 x 8.375 ver 2.3 Operating conditions Supplied accessories ❖ Remote control with two size “ AAA” batt eries ❖ Resource Guide ❖ Quick Setup Guide .
122 Specifications Acceptable signal formats for PC IN, HDMI® 5.375 x 8.375 ver 2.3 HDMI ® signal formats ❖ Some illustrations in this User’ s Guide are for explanation purposes and may differ from the actual unit. ❖ Designs and specifications are s ubject to change without notice.
123 5.375 x 8.375 ver 2.3 Appendix B License Agreement License Information on th e software used in the TOSHIBA Digital TV The software pre-installed in the T OSHIBA Digital T elevisions consists of multiple, independent software components. Each software component is cop yrighted by T O SHIB A or a third party .
124 5.375 x 8.375 ver 2.3 License Agr eement or fitness for specif ic uses. All risks associat ed with the qual ity or performance of these software components are assumed by the user .
125 5.375 x 8.375 ver 2.3 License Agreement (3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the auth ors accept NO LIABILITY for damages of any kind. These conditions appl y to any softw are derived from or based on the IJG code, not just to the unmodified library .
126 5.375 x 8.375 ver 2.3 License Agr eement This license was inspired by the BSD, Artis tic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion an d use of free software in commercial and fr eew are products alike. As a consequence, its main points are that: ❖ W e don't promise that this software works.
127 Index A adv anced picture settings CableClear® digital Noise Reduction 109 Color tempera t ure 108 Dynamic Contrast 107 MPEG Noise Reducti on 110 Static Gamma 108 using 107 audio adjusting q uali.
128 Index switching between two channels 63 channels auto tuning 46 locking channels 87 skipping 48 specific channel 62 storing in memo ry 46 cinema mode selecting 70 closed captions CC selector 75 Di.
129 Index use 16 P panel lock feature using 89 parental controls blocking programs/mo vies by rating (V -Chip ) 82 using 82 PC Audio setting 91 PC settings feature using 90 picture adjusting 71 adjust.
130 Index sleep timer 99 troubleshooting 112 channel tuning problems 11 5 closed caption problems 116 contact T oshiba 117 HDMI® 117 media player problems 117 No REGZA-LINK® operation 116 picture pr.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Toshiba 40E220U è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Toshiba 40E220U - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Toshiba 40E220U imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Toshiba 40E220U ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Toshiba 40E220U, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Toshiba 40E220U.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Toshiba 40E220U. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Toshiba 40E220U insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.