Manuale d’uso / di manutenzione del prodotto TF 7700 HD PVR del fabbricante Topfield
Vai alla pagina of 94
T OPFIELD TF 7700 HD PVR TF 7710 HD PVR User Guide High Definition Digital Satellite Receiv er P ersonal Video Recorder.
.
Contents iii Contents 1 Introduction 1 1.1 Features ............................... 1 1.2 Controlling the digital r eceiver .................. 2 1.2.1 The front panel ....................... 4 1.2.2 The remote contr ol ..................... 5 1.3 What is common interface? .
iv Contents 3 Preference Settings 19 3.1 Language settings .......................... 1 9 3.2 V ideo and audio settings ...................... 2 1 3.2.1 Colour model ........................ 2 1 3.2.2 V ideo cassette recor der .................. 2 2 3.
Contents v 5.2.6 V iewing teletext ...................... 4 4 5.3 V iewing electronic pr ogramme guide .............. 4 5 5.4 W atching multifeed programme ................. 4 5 5.5 Using time shift ........................... 4 6 6 Listing Services 48 6.
vi Contents 7.3.2 T o play in slow motion .................. 7 0 7.3.3 T o play in fast motion ................... 7 0 7.3.4 T o make a bookmark .................... 7 1 7.3.5 T o play back a recor ding repeatedly ........... 7 1 7.3.6 T o play back recor dings in sequence .
1 Chapter 1 Introduction The TF 7700 HD PVR/TF 7710 HD PVR digital receiver is fully compliant with the international Digital V ideo Broadcasting (DVB) standard, and thus is able to r eceive digital broadcasts of that standard. For its operation you need an antenna, which must be installed appropriately .
2 Introduction • Supports DiSEqC 1.0, DiSEqC 1.1, DiSEqC 1.2 and US- ALS. • Can store up to 5000 television and radio services. • Y ou can edit the services list. • Y ou can create favourite lists of your favourite services. • Y ou can view information about the current television or radio programme.
1.2 Controlling the digital receiver 3 NOTE When the digital receiver is of f but plugged into a wall outlet, we say that it is in standby mode; on the other hand, when it is on, it is in operation mode.
4 Introduction 1.2.1 The front panel The front panel of the digital r eceiver has buttons to control the digital receiver , and specific lamps and a display to indicate its status. The following indicates what they mean. button switches the digital receiver between standby mode and operation mode.
1.2 Controlling the digital receiver 5 1.2.2 The remote control 1 2 3 3 4 5 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 1 button switches the digital receiver between standby mode and operation mode.
6 Introduction 13 displays teletext. 14 V .F or mat changes video resolution. See § 3.2.4 for more details. 15 A/R changes aspect ratio. See § 3.2.3 for more details. 16 switches between television services and radio ser- vices.
1.3 What is common interface? 7 29 is used to start slow motion playback. Subsequent presses change the playback speed. 30 is used to jump back to beginnng of recor ding during a playback. 31 is used to jump to end of recor ding during a playback.
8 Introduction 1. Purchase a conditional access module and a subscription card for the pay service you want to watch. 2. Insert the subscription card into the conditional access module. 3. Insert the conditional access module into a common in- terface on the front of the digital r eceiver .
9 Chapter 2 Setup 2.1 Unpacking Before going any further , check that you have r eceived the following items with your digital receiver . • Remote control unit • T wo batteries for the remote control (AAA 1.5 V) • One power cord • One HDMI cable • A copy of this user guide NOTE Accessories may vary according to your local ar ea.
10 Setup the power consumption of the digital receiver , refer to T able 2.1 . • The wall outlet should be near the equipment. Do not run an extension lead to the unit. • Do not expose the digital receiver to any moistur e. The digital receiver is designed for use indoors only .
2.3 Rear panel connections 11 2.3 Rear panel connections The TF 7700 HD PVR/TF 7710 HD PVR has a wide range of connections on the back. L R 16 S/PDIF 1 LNB 1 IN LNB 2 IN LNB 2 OUT LNB 1 OUT LAN HDMI S.
12 Setup 9 VIDEO Composite video output socket for the televi- sion set. (yellow) 10 A UDIO L/R Stereo audio output socket for the television set or the audio system. (white/red) 11 Y/Pb/Pr Component video output socket for the tele- vision set.
2.4 Connecting up your digital receiver 13 2.4 Connecting up your digital receiver There ar e several ways to set up the digital receiver . Set up the digital receiver suitably to your television and other appliances. If you have any problem with your setup or need help, contact your dealer .
14 Setup devices to be supplied with power through antenna input con- nections simultaneously for a long time, your LNBs may lack power to operate. So it is recommended to link the LNB 1 OUT connector to the LNB 2 IN connector with a loop cable even though the digital receiver is designed to operate over two antennas alternatively .
2.4 Connecting up your digital receiver 15 T o use the HDMI connector If you have a high definition television set, you should use a HDMI cable for best re- sults. Plug one end of the cable into the HDMI socket on the digital receiver , and the other end into the matching socket on your televi- sion.
16 Setup T o use the component video connector Y Pb Pr Y ou will need to obtain a component video ca- ble (RCA cable) to use the component video connector . Plug one end of the cables into the Y (green), Pb (blue) and Pr (r ed) sockets on the digital receiver , and the other end into the matching sockets on your television.
2.5 Switching on for the first time 17 T o connect the audio connectors Y ou will need to obtain an audio cable (RCA cable) to connect the audio connectors. Plug one end of the cable into the A UDIO L (white) and A UDIO R (red) sockets on the digital re- ceiver , and the other end into the matching sockets on your television or audio system.
18 Setup 2.5.1 Inserting batteries in the remote control T o insert the batteries, open the battery compartment by remov- ing the lid, and then insert the batteries observing the polarity , which is marked on the base of the battery compartment.
19 Chapter 3 Preference Settings 3.1 Language settings Y ou can select the language in which the menu would be dis- played. In addition to that, you can select which language of au- dio track and of subtitle track should be output. Select the System Setting > Lan- guage Setting menu.
20 Preference Settings Subtitle language Set the 1st Subtitle Language option and the 2nd Subtitle Lan- guage option to your desired languages. When you watch a programme, if the pr ogramme has a subtitle track of the lan- guage that is designated for the 1st Subtitle Language , it will be displayed.
3.2 V ideo and audio settings 21 3.2 V ideo and audio settings Y ou have to configure the video and audio settings appropriately to your television set and other appliances. Select the System Setting > A/V Output Setting menu. Y ou should see a screen like the left figure.
22 Preference Settings 3.2.2 V ideo cassette recorder Y ou can have the digital receiver linked to your video cassette recor der or such an appliance via the VCR SCART connector . In that case, the digital receiver will operate dif ferently depending on the setting of the VCR Scar t T ype option.
3.2 V ideo and audio settings 23 normal screen. Otherwise, to watch them in the shape like the right figure, set it to Center e xtract . W ide-screen pictur es then will be cut out on the left and right sides equally to fit to the width of the normal screen.
24 Preference Settings only one source or both of them in either ster eo or mono. Set the Sound Mode option as you desire. Apart from this setting, you can change the sound mode with the button. See § 5.2.4 for detailed description. The digital receiver can output two types of digital audio sig- nals via the S/PDIF connector .
3.3 Local time setting 25 T able 3.1: T ime offset table Time offset City GMT − 12:00 Eniwetok, Kwajalein GMT − 11:00 Midway Island, Samoa GMT − 10:00 Haw aii GMT − 09:00 Alaska GMT − 08:00 .
26 Preference Settings Mean T ime, make sure that time of fset does not include day- light saving time. 3.4 Parental control In general, television programmes ar e classified according to the level of violence, nudity and language of their content.
3.5 Adjusting the on-screen display 27 T o change the number , select the Change PIN Code menu; then an input box appears. Y ou have to enter a desired number twice for confirmation. Y ou can also restrict uses of some menus. Selecting the Access Control menu displays a list of menus that you can lock.
28 Preference Settings reverse and pause live television as if playing back a r ecording. T o enable this feature, select the System Setting menu and then set the Time Shifting option to Enable .
29 Chapter 4 Service Search After connecting up the digital receiver , you will need to per- form a service search. 4.1 Searching broadcasting services This digital receiver can be operated with both fixed antenna and motorized antenna. Y ou have to configure antenna settings according to your antenna system in the following or der: 1.
30 Service Search The other is K u band which ranges approximately fr om 12 to 18 GHz. The LNB (Low Noise Block converter) is used to take a wide band of relatively high frequencies, amplify and convert them to similar signals that is carried at a much lower frequency , which is called Intermediate Frequency (IF).
4.1 Searching broadcasting services 31 NOTE Both the LNB 1 IN and LNB 2 IN sockets should be connected to your antennas either directly or via the loop-thr ough cable. If you have connected only one socket, some features such as dual recor ding will not function.
32 Service Search For example, to select the antenna con- nected to the A5 input in the left figure, set the DiSEqC 1.1 option to 2 of 4 and the DiSEqC 1.0 option to 1 of 4 . If you have a mini DiSEqC 1.0 switch which has only two inputs, you should set the DiSEqC 1.
4.1 Searching broadcasting services 33 1. Choose your desired satellite at the Satellite Name op- tion. 2. Select the tuner that is connected to the motorized an- tenna at the T uner Select option. 3. Set the DiSEqC Command Mode option to User . 4. Set the Motor Control option to Goto .
34 Service Search T o use the USALS protocol, se- lect the Installation > USALS Setting menu. Y ou should see a screen like the left figur e. At first you have to set the Mo- torized DiSEqC 1.3 option to En- able . T o get every satellite position calculated, perform the following steps: 1.
4.1 Searching broadcasting services 35 4.1.4 Searching services T o perform service search, select the Installation > Ser vice Search menu. Y ou should see a screen like the left figure. There ar e four service search methods: • Searching every service of a satellite.
36 Service Search 1. Choose your desired satellite at the Satellite Name op- tion. 2. Set the Search Mode option to Manual . 3. Choose your desired transponder at the F requency op- tion or enter it with the numeric buttons. 4. Enter the symbol rate of your desired transponder to the Symbol Rate option with the numeric buttons.
4.1 Searching broadcasting services 37 4. Enter the symbol rate of your desired transponder to the Symbol Rate option with the numeric buttons. 5. Set the P olarization option to the polarization of your desired transponder . 6. Specify the packet identifiers of your desired service at the PID option with the numeric buttons.
38 Service Search 4.2 Copying services The digital receiver maintains a separate services list with each tuner . If a certain service is registered on only one tuner , it may be impossible to watch one service while recor ding. Y ou can copy entries of one tuner ’s services list to the other tuner ’s services list to avoid such inconvenience.
39 Chapter 5 Daily Usage 5.1 V olume control Use the and buttons to alter the volume to a comfortable level. Y ou may need to adjust the volume on your television set too. T o temporarily switch off the sound, pr ess the button. Press it again to r estore the sound to previous level.
40 Daily Usage On the services list, you can see the service information: • Service number and name • T ransmitting satellite • Receiving tuner: T1 stands for the first tuner; T2 stands for the second tuner . • T ransponder information A dollar sign ( $ ) may be marked on some entries, indicating pay service.
5.2 W atching television 41 • Select your desired tuner at the T uner option, then only services provided thr ough the selected tuner will be listed. • By setting the Show Provider option to On , you can view service entries by groups of br oadcasters.
42 Daily Usage Pressing the SA T button displays the satellite list. Once you select a desired satellite, only services pr ovided by the selected satellite are listed. 5.2.2 The favourite services list Y ou can select a service to watch on a favourite list as well as on the services list.
5.2 W atching television 43 F3 button. T o create a new gr oup, press the F2 button; then the on-screen keyboar d appears. Enter your desir ed name and save it. See § 6.3 for how to use the on-screen keyboar d. T o delete a group or a service, pr ess the button; then you get asked for confirmation.
44 Daily Usage programmes with the or button. T o adjust the sound volume in this case, hold down the or button until the sound bar appears and reaches your desir ed level. Pressing the button once more displays detailed informa- tion about the current pr ogramme.
5.3 V iewing electronic programme guide 45 5.3 V iewing electronic programme guide The Electronic Pr ogramme Guide shows the current and sched- uled programmes that ar e or will be available on each service with a short summary for each programme.
46 Daily Usage If a multifeed programme is pr ovided on the current service, the multifeed symbol ( ) will be marked on the information box. Pr ess the button, then available video tracks will be listed. Once you select one, it will be presented. At this time, you have to press the button once more to select audio tracks.
5.5 Using time shift 47 • Y ou can jump forward 30 seconds at a time by pr essing the F3 button. • Y ou can jump backward 20 seconds at a time by pr essing the F4 button. • Y ou can change playback speed. For slow motion see § 7.
48 Listing Services Chapter 6 Listing Services 6.1 Editing the services list Y ou would have got the services list after service search. Y ou can rename, move, lock or delete service entries on the services list. Select the Organizing Svc/F av > Organizing Ser vices menu.
6.1 Editing the services list 49 T o edit the radio services list, press the button; then radio service entries will be listed on the right column. T o switch back to the television services list, press it again. T o change the name of a service, select the Rename and select a desired service; then the on-scr een keyboard appears.
50 Listing Services CAS–FT A from pay services to free services Provider by br oadcaster F av–NoF av from favourite services to unfavourite services. T ransponder by transponder 6.2 Editing the favourite list Y ou can make your own favourite services list.
6.2 Editing the favourite list 51 T o delete a group, put the highlight bar on the gr oup entry you want and press the F3 button; then a message box appears asking you for confirmation. If you select Y es , it will be deleted. Y ou can add a favourite service to a group by taking the follow- ing steps: 1.
52 Listing Services 6.3 How to use on-screen keyboard Y ou can move the highlight key horizontally with the and buttons and vertically with the and buttons. Pressing the OK button on a key enters its let- ter in the input line. T o type a space, select the Space key .
6.5 Editing channel data on your computer 53 1. Plug one end of a RS-232 cable (9 pin D- sub cable) into the RS-232 port on the digital receiver , and the other end into the matching port on the other digital re- ceiver . 2. T urn on the source digital receiver .
54 Listing Services T o use V ega , you have to prepare a RS-232 cable to link the digital receiver with your personal computer . Plug one end of a RS-232 cable (9 pin D-sub cable) into the RS-232 port on the digital receiver , and the other end into the matching port on your computer .
6.5 Editing channel data on your computer 55 6.5.1 Editing satellite and transponder list T o edit the satellite list, first select the View > Satellite Inf or ma- tion menu item. Alternatively you can click the Satellite icon on the toolbar or press the F1 key on your keyboar d.
56 Listing Services T o delete a satellite entry , choose your desired satellite entry at the Satellite drop-down list box, and then select the Function > Satellite, TP > Delete Satellite menu item. Then a box appears asking for your confirmation, the selected satellite entry will be deleted by pressing the Y es button on it.
6.5 Editing channel data on your computer 57 6.5.2 Editing television and radio services list T o edit the television services list, first select the View > TV Ser- vice menu item. Then the television services list is displayed and related menus become enabled.
58 Listing Services 6.5.3 Editing favourite list T o edit the favourite list, first select the View > F av orite Group menu item. Then the favourite gr oup list is displayed and related menus become enabled.
6.5 Editing channel data on your computer 59 T o add a favourite group, select the Function > F av Group > Add New F av Group menu item. Then you will see a dialog box like the left figure. Enter your desired name into the F a- vorite Group Name text box to name a new group.
60 Recording and Playing Chapter 7 Recording and Playing Y ou can recor d two different services while watching another if two of the services are pr ovided through the same transponder The TF 7700 HD.
7.1 Recording a programme 61 limited number of services while the two programs ar e being recor ded. CAUTION Do not move the digital receiver nor pull out the plug while it is running. It may cause damage to recorded programmes. Note that T opfield is not responsible for damages inflicted on files that are stored on the hard disk drive.
62 Recording and Playing this program option is selected, the curr ent recording will stop when the current pr ogramme is scheduled to end. Likewise, once the After ne xt program option is selected, the current recor ding will stop when the next programme is scheduled to end.
7.1 Recording a programme 63 you press any button on the r emote control or on the front panel even just one time, the digital receiver will not switch into standby mode. T o input a timer recor ding, select the Timer Setting menu; then the timer list will be displayed.
64 Recording and Playing Every Week end means ‘Saturday and Sunday every week’. W eekly means ‘one day every week’. Every Weekda y means ‘from Monday to Friday every week’. If your favourite programme is br oadcasted at weekends and you wish to recor d every episode of the programme, set the Mode option to Every Week end .
7.1 Recording a programme 65 7.1.3 Scheduling recordings using the programme guide If the electronic pr ogramme guide is properly pr ovided, you can make timer events on it. The instructions on how to make timer recor dings using the elec- tronic pr ogramme guide are as follows: 1.
66 Recording and Playing it back because it has not been descrambled. So it is recom- mended to recor d pay service programmes with the subscrip- tion card so that they can be r ecorded in descrambled form. In that case you can enjoy them without the subscription card like free service ones.
7.2 File archive 67 Select the File List menu or alter- natively press the button to display the recor ded programme list. The file information is com- prised of the following elements: file number , file name, recording time, playing duration, file size and so on.
68 Recording and Playing 1. Put the highlight bar on a desired recor ding. 2. Press the F4 button to display the additional options. 3. Set the Lock option to Lock ed . 4. Press the EXIT button. 5. The lock symbol ( ) is displayed on it.
7.3 Playing back a recording 69 7.3 Playing back a recording When a programme is r ecorded, its additional contents such as audio tracks or teletext are also r ecorded together . So you can enjoy them while playing back a recor ding. The instructions on how to play a recor ding are as follows: 1.
70 Recording and Playing • T o go forward, hold down the button; to go backward, hold down the button. • T o bookmark a position, refer to § 7.3.4 . • If there ar e no bookmarks, you can jump forward 30 seconds at a time by pressing the F3 button.
7.3 Playing back a recording 71 7.3.4 T o make a bookmark Y ou can mark favourite parts of a recor ding by creating book- marks, and then jump to them. Y ou can have up to 64 book- marks. Bookmarks are stor ed with the recor ding so that you can use them again afterwards.
72 Recording and Playing 2. Move to the beginning scene of the part you want to play repeatedly by holding down the or button. 3. Press the button, then the pointer starts to blink. 4. Move to the end scene; the part is marked in purple. 5. Press the button again, then the part turns green, and repeated playback starts.
7.4 Copying a recording 73 On the recor ded programme list, a purely gr een $ indicates the recor ding has been wholly descrambled; on the other hand, a yellowish green $ indicates it has been partially descrambled, and a purely yellow $ indicates it has not been descrambled at all.
74 Recording and Playing 1. Insert a USB memory stick into the USB port of the digital receiver . 2. Press the button and then the or button to display the file list on the USB memory stick. 3. Put the highlight bar on a desired file and pr ess the F3 button; then the list of folders on the hard disk drive gets displayed.
7.7 DivX playback 75 7.7 DivX playback Y ou can enjoy video files in DivX format with the digital re- ceiver . T o play a DivX file, perform the following steps: 1. Press the button, and then the or button to display the list of video files. 2. Put the highlight bar on a desired file and pr ess the OK button to start playback.
76 Firmware Update Chapter 8 Firmware Update The digital receiver has a stable and convenient firmwar e to use. However , a new firmware may be released to impr ove the digital receiver . Y ou can get the latest firmware and an update utility which runs on most versions of W indows from the T opfield website, http://www.
8.2 From a USB memory 77 NOTE Y ou can only update with firmwares of which system identifi- cation is identical to that of yours. Otherwise you will fail in firmware update. 8.2 From a USB memory If you have a USB memory stick, you can update the firmware from it by performing the following steps: 1.
78 Firmware Update 8.3 From the network via LAN port Y ou can get a new firmware fr om the network via LAN port. Select the Installation > LAN Set- ting > IP Configuration menu. Y ou should see a screen like the left figure. Y ou may assign a dynamic IP ad- dress to the digital r eceiver .
8.4 From your computer via RS-232 port 79 1. Plug a LAN calbe into the LAN port on the digital receiver . 2. Select the Installation > LAN Setting menu. 3. Set the Auto LAN Firmware Upgrade option to Off . 4. If you select the Installation > LAN Fir mware Upgrade menu, the digital receiver will ask you whether to start firmwar e update.
80 Firmware Update 8.5 From another digital receiver via RS-232 port It is possible to transfer the firmware fr om the digital receiver to another same digital receiver by connecting them with a RS- 232 cable. T o update the firmware with this method, perform the following steps: 1.
8.6 Over the air 81 Select the Installation > O T A Firmware Upgrade menu. Y ou should see a screen like the left figure. Selecting the Star t command starts firmware update.
82 INDEX Index 16:9 , 22 16:9 Display F ormat , 22 1st Audio Language , 20 1st Subtitle Language , 20 22 kHz , 31 2nd Audio Language , 20 2nd Subtitle Language , 20 4:3 , 22 A/V Output Setting , 21 AC.
83 Edit Current F av Group, 59 Edit Satellite, 56 Edit T ransponder, 56 Electronic Programme Guide, 45 Every Day , 63 Every Weekda y , 64 Every Week end, 64 F actor y Setting, 38 F av–NoF av , 41 , .
84 INDEX P arental Control, 26 PID, 37 Pilot, 36 PIN, 26 P olarization, 36 , 37 P osition Index, 55 Provider , 41 , 50 Radio, 59 , 63 Radio Service, 57 radio services list, 49 Record, 63 Record contin.
85 USALS, 33 USALS Setting, 34 USB, 77 USB Firmware Upgrade, 77 User, 33 VCR, 12 VCR, 17 VCR Scar t T ype, 22 V ega , 53 , 54 VIDEO , 12 VIDEO, 14 , 16 , 23 Video Format, 23 Weekly , 64 wide-screen te.
.
.
Manufactured under license fr om Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. MPEG Layer-3 audio coding technology licensed fr om Fraunhofer IIS and Thomson.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Topfield TF 7700 HD PVR è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Topfield TF 7700 HD PVR - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Topfield TF 7700 HD PVR imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Topfield TF 7700 HD PVR ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Topfield TF 7700 HD PVR, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Topfield TF 7700 HD PVR.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Topfield TF 7700 HD PVR. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Topfield TF 7700 HD PVR insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
