Manuale d’uso / di manutenzione del prodotto Shark del fabbricante Tiger
Vai alla pagina of 17
Owner’s Manual.
Important Note To Parents About Safe Riding Your child's safety will depend on your commitmen t to always provide a safe riding environment and a properly maintained vehicle. As with any m oving vehicle there are possible safety risks; be sure to heed to the following precautions.
Safety Precautions 1. Review all the ins tructions carefull y before operations. 2. Follow all rules and regulations in your area for operating an electric scooter. 3. Do not allow others to use the sc ooter without p roper instructions. 4. Ride only in good weath er, on smooth surfaces.
List of Parts Handle Bar Grips Front Fork Front Wheel Power Switch Kickstand Skid Plate Rear Wheel Deck Quick Release Hand Brake Throttle Controller Batteries 600W Motor Brake Pad Charger Chain Tubes .
Assembly Instructions 1. Carefully take your scooter out of the box. 2. Assemble the Handle Bar. a. Remove the bolt from the base of the Handle Bar a nd position th e top part of the H andle Bar on to the base and tighten the bolt. b. Lift Handle Bar into upright positi on and tighten star screw.
c. Unscrew the bolts on the ‘T’ of the Handle B ar and place the Gri ps into the Handle B ar and screw in the bolts to secure the grips. 3. Turn the Power Switch to the on position.
6. Charging 1. Power Switch must be in the ‘off ’ position. 2. Do not plug the charger in to the outlet first, for s a fety reasons plug the ch arger cord into the scooter first, then into a 110 V outlet. 3. Charge your scooter for 6-8 hour s. The LED will be red dur ing charging and on ce it is fully complete the LED will turn to green.
Change the Rear Tire • Tools Required: - Phillips screwdriver - 8mm wrench - 2 x 16mm wrench Step Description 1 Ensure power switch is in the "o ff" position before beginning an y work on the scooter. 2 Remove screw holding brake shield in plac e located next to the left side of the rear tire.
Change the Motor Step Description 1 Remove the deck. 2 Disconnect the wires, by loosening the bolts . 3 Unscrew the 2 bolts that secure the motor, as pict ured below, and remove the m otor.
Adjust the Chain Step Description 1 Loosen axle bolt. 2 To tighten chain, turn the 8mm nut on the eyebolt counter clockwise 3 To loosen the chain, turn the 8mm nut on the eyebolt clockwise.
Adjust the Brake Step Description Tighten Brake Loosen nut; loosen the 8mm nut and pull th e cable ba ck and slide the arm forward, once you have the cable in position tight en the 8mm nut. Loosen Brake Loosen nut; loosen the 8m m nut and the spring will pull the c able back, once you have the cable in position tighten the 8mm nut.
Troubleshooting Chart Problem Cause Solution The power light by the on/off switch does not light up when the scooter is turned on ? 1. Battery is discharged. 2. Loose connection inside the scooter. 1. Recharge your scooter. 2. Remove (3) screws that hold the deck on and remove the deck.
YOUR INSURANCE POLICIES MAY NOT PROVIDE COVER AGE FOR ACCIDENTS INVOLVING THE USE OF THIS SCOOTE R. TO DETERMINE IF COVERAGE IS PROVIDED, YOU SHOULD CONTACT YOUR INSURANCE COMPANY OR AGENT 13.
Warranty. Rad2Go warrants each new Rad2Go product for thirty ( 30) days acco rding to the following terms. This warranty ex tends to the origi nal retail purch aser only and commences on the date of th e origi nal retail purch ase.
Rad2Go Electric Scoote r Warranty This Warranty Registra tion is to be com pleted by the deal er or customer at the tim e of purchase an d submitted to Rad2Go, Inc.
nature and any circumstances le ading to the problem . A service te chnician will contac t you with sp ecific instructions to ensure that you receiv e the best se rvice for your scooter in the most econom ical way. 5. Purchaser here with acknowled ges : a.
17 BY SIGNING BELOW YOU ARE AGREEING TO HAVE ANY DISPUTES ARISING OUT OF THE MATTER INCLUDING IN THE “ARBITRATION OF DISPUTES” PROVISION DECIDED BY NEUTRAL, BINDING ARBITRATION AS PROVIDED BY CALI FORNIA LAW, AND THAT YOU ARE GIVING UP THE RIGHTS YOU MIGHT POSSESS TO HAVE THE DISPUTE LITIGATED IN A COURT OR JURY TRIAL.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Tiger Shark è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Tiger Shark - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Tiger Shark imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Tiger Shark ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Tiger Shark, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Tiger Shark.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Tiger Shark. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Tiger Shark insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.