Manuale d’uso / di manutenzione del prodotto JD 5065 / 5085 - 5105M del fabbricante Tiger Products Co., Ltd
Vai alla pagina of 224
P AR TS LISTING WITH MOUNTING AND OPERA TING INSTRUCTIONS SIDE ROT AR Y ASSEMBLIES JD 5065 / 5085 - 5105M 06010020 Tiger Corporation 3301 N. Louise Ave.
T O THE OWNER / OPERA T OR / DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices.
FOR W ARD This manual contains information about many features of the T iger mowing and roadside maintenance equipment. Some of these include: Safety precautions, Assembly instructions, Operations, Maintenance and Parts. This manual will also assist you in the proper break-in, daily care, and troubleshooting of your new mower .
.
T ABLE OF CONTENTS SAFETY SECTION _____________________________________ 1 ASSEMBL Y / MOUNTING SECTION ______________________ 2 OPERA TION SECTION _________________________________ 3 MAINTENANCE SECTI.
.
SAFETY SECTION.
Side Rtry Safety Section 1-2 SAFETY SAFETY Indicates an imminently hazardous situation that, if not avoided, WILL result in DEA TH OR VER Y SERIOUS INJUR Y . Indicates an imminently hazardous situation that, if not avoided, COULD result in DEA TH OR SERIOUS INJUR Y .
Side Rtry Safety Section 1-3 SAFETY SAFETY ! Si no lee Ingles, pida ayuda a alguien que si lo lea para que le traduzca las medidas de seguridad. (SG-3) PELIGRO! LEA EL INSTRUCTIVO! DANGER! Never opera.
Side Rtry Safety Section 1-4 SAFETY SAFETY DANGER! Never allow children or other persons to ride on the Tractor or Implement. Falling off can result in serious injury or death. (SG-10) DANGER! Never allow children to operate or ride on the Tractor or Implement.
Side Rtry Safety Section 1-5 SAFETY SAFETY WARNING! The operator and all support personnel should wear hard hats, safety shoes, safety glasses, and proper hearing protection at all times for protection from injury including injury from items thrown by the equipment.
Side Rtry Safety Section 1-6 SAFETY SAFETY WARNING! Periodically inspect all moving parts for wear and replace when necessary with authorized service parts. Look for loose fasteners, worn or broken parts, and leaky or loose fittings. Make sure all pins have cotter pins and washers.
Side Rtry Safety Section 1-7 SAFETY SAFETY CAUTION! On a fully-assembled unit, do not remove the Wing Retaining Strap until hoses are attached to the tractor and the Wing Cylinders are filled with oil. Lower the Wings slowly and carefully. Keep bystand- ers away during operations.
Side Rtry Safety Section 1-8 SAFETY SAFETY DANGER! The rotating parts of this machine have been designed and tested for rugged use. However, the blades could fail upon impact with heavy, solid objects such as metal guard rails and concrete structures.
Side Rtry Safety Section 1-9 SAFETY SAFETY DANGER! Rotary Mowers are capable under adverse conditions of throwing objects for great distances (100 yards or more) and causing serious injury or death.
Side Rtry Safety Section 1-10 SAFETY SAFETY WARNING! Never leave the Tractor and Implement unattended while the Implement is in the lifted position. Accidental operation of lifting lever or a hydraulic failure may cause sudden drop of unit with injury or death by crushing.
Side Rtry Safety Section 1-11 SAFETY SAFETY WARNING! The rotating parts of this machine continue to rotate even after the Tractor has been turned off. The operator should remain in his seat for 60 seconds after the brake has been set, the PTO disengaged, the tractor turned off, and all evidence of rotation has ceased.
Side Rtry Safety Section 1-12 SAFETY SAFETY.
Side Rtry Safety Section 1-13 SAFETY SAFETY ITEM PART NO. QTY. DESCRIPTION 1 22839 1 INSTRUCT Don Not Lubricate With Automatic Grease Gun 2 22840 1 WARNING Foreign Objects Contacted 3 24028 1 WARNING .
Side Rtry Safety Section 1-14 SAFETY SAFETY 10"X5.5" 31522 MOWER DECK 18.25"X10" 31523 HYDRAULIC T ANK 22840 INSIDE OF CAB 22839 MOWER DECK P AR T NO.
Side Rtry Safety Section 1-15 SAFETY SAFETY 5 42399 MOWER DECK 42400 MOWER DECK 33743 INSIDE OF CAB 42350 MOWER DECK P AR T NO. LOCA TION.
Side Rtry Safety Section 1-16 SAFETY SAFETY 29-6T3221 6T3220 FRONT PUMP MOUNT 6T3221 INSIDE OF CAB 6T3219 INSIDE OF CAB 6T3217 MOWER DECK P AR T NO. LOCA TION.
Side Rtry Safety Section 1-17 SAFETY SAFETY 6T3236 MOWER DECK 6T3243 INSIDE OF CAB 6T3234 INSIDE OF CAB 6T3233 INSIDE OF CAB P AR T NO. LOCA TION.
Side Rtry Safety Section 1-18 SAFETY SAFETY 16 6T3236 MOWER DECK HYDRAULIC T ANK 6T3243 INSIDE OF CAB 6T3234 INSIDE OF CAB 6T3233 HYDRAULIC T ANK P AR T NO.
Side Rtry Safety Section 1-19 SAFETY SAFETY TB101 1 MOWER DECK 02962764 MOWER DECK DRAFT BEAM 6T3261 MOWER DECK 6T3249A MOWER DECK P ART NO. LOCA TION.
Side Rtry Safety Section 1-20 SAFETY SAFETY 02967827 CAB FENDER 02965262 DRAFT BEAM P AR T NO. LOCA TION.
Side Rtry Safety Section 1-21 SAFETY SAFETY 00756059 MOWER DECK 34852 HYDRAULIC T ANK.
Side Rtry Safety Section 1-22 SAFETY SAFETY ITEM PART NO. QTY. DESCRIPTION 50023 AVAIL MANUAL CANISTER COMPLETE 1 00776031 1 Round Manual Canister 33997 1 Decal, Sheet, Manual Canister 2 * Decal 3 * D.
Side Rtry Safety Section 1-23 SAFETY SAFETY This section is intended to explain in broad terms the concept and effect of federal laws and regulations concerning employer and employee equipment operators. This section is not intended as a legal interpretation of the law and should not be considered as such.
Side Rtry Safety Section 1-24 SAFETY SAFETY.
Assembly Section 2-1 ASSEMBL Y SECTION JD5XX5M - TM.
ASSEMBL Y Assembly Section 2-2 Before attempting to moun t your T iger mower , it is import ant to read an underst a nd all of the Safety Messages in the Safety section of this manual. Check complete shipment list again st the packing list to make sure there are no shortages.
ASSEMBL Y Assembly Section 2-3 CRANKSHAFT ACCESS T o access the crankshaf t of the JD506 5M and 5085-105M, a hole will need to be cut in the front of the tractor casting. The battery plate will need to be raised to cut the hole and attach the crankshaf t adapter .
ASSEMBL Y Assembly Section 2-4 CRANKSHAFT ACCESS (continued) Find the center punched marking on the fr ont end of the tractor(shown belo w), and use it as a guide for cutting. Use a 1-3/4” ho le saw to cut a hole for the driveshaft. Once the hole is cut you will be able to look thro ugh the hole and see the driveshaf t cover .
ASSEMBL Y Assembly Section 2-5 DRIVESHAFT & FRONT PUMP MOUNTING Thread the pump drive shaf t into the crankshaf t adapter . Slide splined drive shaf t coupler onto the pump drive shaf t. Install the pump onto the mounting bracket. NOTE: the pump is of fset to one direction, the pump should be installed with the offset side on top.
ASSEMBL Y Assembly Section 2-6 CABLE CONTROL LEVER ST AND Place the cable control bracket on the floor so th at the bracket is 2-1/2” from the side edge of the door , and 4-3/8” in front of the re ar edge of the door .
ASSEMBL Y Assembly Section 2-7 SWITCH BOX WIRING Route the green wires and the red wire (with the 10amp fuse) fro m the switchbox to the front console pan el. Refer to the part s section for wiring diagram to hook up the switch box. Cover the wire s from the sw itch box with plastic wire wrap provided.
ASSEMBL Y Assembly Section 2-8 WEATHER-PACK/METRI-PACK ASSEMBLY These instructions apply to bo th Weather-Pack and Metri-p ack connectors. NOTE: Use the specific tool for the type of conne ctor you are assembling.
ASSEMBL Y Assembly Section 2-9 V AL VE MOUNTING Attach the rea r valve mounting bracket to the fender of the tractor by removing the two rear bolts on the left fender and the two rear bolts on the right fender . See illustration below . Drill the square holes in the fenders to accept 3/8” cap screws.
ASSEMBL Y Assembly Section 2-10 PRESSURE LINE INST ALLA TION The hydraulic pressure line will be plum bed into the tractors power beyond port. Locate the power beyond port on the up per right side of the tractor rear remotes, remove the plug (refer to the illu stration below and the Parts Section).
ASSEMBL Y Assembly Section 2-11 MANUAL LIFT V AL VE PORTS (ASM-C-0057) MANUAL SWITCH BOX MOUNTING The switch box is to be secured to the operators side o f the control hand les, or valve stand. Refer to the part s section for assembly and component s needed.
ASSEMBL Y Assembly Section 2-12 *NOTE ON HUSCO CONTROL V A L VES* Manual, cable controlled (Husco control va lve) boom mowers require check valves with integral restricting orifice (#06502036) in stalled in the control valve wo rk ports that are connected to the gland ends of th e main and secondary boom cylinders.
ASSEMBL Y Assembly Section 2-13 HOSE AND WIRE ROUTING Attach two clamps to the right rear wheel we ll for proper hose/wire routing. Drill one hole for each clamp. Use th e lower re ar corner of the wheel well as an origin for measuring. The holes should be 10mm or 3/8” reamed to a ccept 3/8” hardware.
ASSEMBL Y Assembly Section 2-14 FENDER CUT FOR WHEEL WELL T ANK A notch will have to be cut into the left rear fender to allow room for the hyd raulic tank filler neck. The notch sho uld start at 2 inches from the rear corner of the fender and create a 1 inch deep arc that is 5 inch es long.
ASSEMBL Y Assembly Section 2-15 mast, and to the flail mowers. The hoses may get into the front and/or rear tires if not properly routed and clamped. (ASM-C-0061) FILLING HYDRAULIC RESER VOIR Refer to.
ASSEMBL Y Assembly Section 2-16 requirements. (ASM-C-0004hydro resrv) WHEEL SP ACER WITH WHEEL WELL T ANK When the left wheel is off, a sp acer kit is needed with the wheel well t ank (part# 06200637.) Atta ch the spacer to the lef t wheel portion of the axle with the hardware provided.
ASSEMBL Y Assembly Section 2-17 GENERAL HOSE INST ALLA TION Refer to the part s section for det ailed information about hoses and fittings for this application. (ASM-C-0 01 1) HOSE COVERING Secure hoses together with zip ties whereve r loose. Wrap the hoses b etween the swivel and main boom with the hose cover pr ovid ed.
ASSEMBL Y Assembly Section 2-18 chart located in the mainten ance section of this manual. (ASM-JD-0072) . SIDE MOWER HYDRAULIC DIAGRAM (ASM-C-0090).
ASSEMBL Y Assembly Section 2-19 CONTINUOUS DUTY SOLENOID SWITCH Mount the solenoid switch, drill holes to match if necessary , mount in dry an d well protected area. Secure as shown in the p arts section. A.) ORANGE 10 GA. wire from terminal (D) to +12V battery post on tractor st arter solenoid.
ASSEMBL Y Assembly Section 2-20 CONTINUOUS DUTY SOLENOID SWITCH (MOUNTING) (ASM-JD-0096).
ASSEMBL Y Assembly Section 2-21 DRAFT BEAM INST ALLA TION Install ½” O-ring breather into butt port of inboard cylinder . Install fittings in the rod end of the cylinder according to the dia gram in the Common Part s section. These fittings should be positioned to face the butt end of the cylinder .
ASSEMBL Y Assembly Section 2-22 MOWER MOUNTING Check that all grease zerks have been inst alled in the draft beams pivot arm, lef t linkage arm, right linkage arm, a nd cylinder mounting ears. Using a clevis pin and roll pins, connect the pivot arm to clevis on draft beam.
ASSEMBL Y Assembly Section 2-23 TRA VEL LOCK MOUNTING Install the travel lock bracket wit h pin and clip on the draf t beam. Slide the draf t beam and align the travel lock bracket hole with t he mounting hole on the main frame. Inst all the capscrew , lockwasher and hex nut as shown in the picture.
ASSEMBL Y Assembly Section 2-24 ST OP BOL T ADJUSTMENT Extend the outboard cylinder all th e way out. Adjust the stop adjustment bolt (located on the top of the draft beam) out until it is up against the bonnet. Lock the bolt down with the ¾” hex nut.
ASSEMBL Y Assembly Section 2-25 FINAL PREP ARA TION FOR OPERA TION Place operators safety and operation d ecals on the steering column and side counsel where they are clearly visible to the oper ator . These decals should be understood by each operator of the machine in conjunction with th e safety and operation section of this book.
ASSEMBL Y Assembly Section 2-26.
Operation Section 3-1 © 201 1 Alamo Group Inc. OPERA TION SECTION.
OPERATION SIDE ROTARY Operation Section 3-2 © 201 1 Alamo Group Inc. OPERA TION TIGER SIDE ROT AR Y MOWER OPERA TING INSTRUCTIONS T iger Side Rotary Mowers are manufactured with quality material by skilled workers.
OPERATION SIDE ROTARY Operation Section 3-3 © 201 1 Alamo Group Inc. OPERA TION 1. ST ANDARD EQUIPMENT AND SPECIFICA TIONS SIDE ROT AR Y Cutting Width 60” and 72” Actual Cut S pindle Drive Direct.
OPERATION SIDE ROTARY Operation Section 3-4 © 201 1 Alamo Group Inc. OPERA TION 2. OPERA TOR REQUIREMENTS Safe operation of the unit is the re sponsibility of a qualified ope rator .
OPERATION SIDE ROTARY Operation Section 3-5 © 201 1 Alamo Group Inc. OPERA TION 3. TRACT OR REQUIREMENTS In addition to tractor horsepowe r and size required to operate th e boom unit, the tractor mu.
OPERATION SIDE ROTARY Operation Section 3-6 © 201 1 Alamo Group Inc. OPERA TION 3.4 Front End Weight A minimum of 20% tot al tractor weight must be maint ained on the tractor front end at all times. Front end weight is critical to maintain steering contro l and to prevent the tractor from rea ring up while driving.
OPERATION SIDE ROTARY Operation Section 3-7 © 201 1 Alamo Group Inc. OPERA TION 4.2 Dismounting the T ractor Before dismounting, park the tractor and implement on a reasonably level surface, apply the parking brake, idle the engine down and lower the im plement to the ground.
OPERATION SIDE ROTARY Operation Section 3-8 © 201 1 Alamo Group Inc. OPERA TION Never run the T ractor engine in a closed building or witho ut adequate ventilation. The exhaust fumes can be hazardou s to your health. (SG-23) S tart tractor only when properly seated in the Tractor seat.
OPERATION SIDE ROTARY Operation Section 3-9 © 201 1 Alamo Group Inc. OPERA TION Do not operate this Equipment with hydr aulic oil o r fuel leaking. Oil and fuel are explosive a nd their presence could presen t a hazard.
OPERATION SIDE ROTARY Operation Section 3-10 © 201 1 Alamo Group Inc. OPERA TION 7.1 T ractor Pre-Operation Inspection/Service Refer to the tractor op erator ’s man ual to ensure a complete pre-operation inspection and scheduled service is performed accord ing to the manufacturers recommendations.
OPERATION SIDE ROTARY Operation Section 3-11 © 201 1 Alamo Group Inc. OPERA TION NOTE: The mower Op erator’s Manual and affixed Decals cont ain import ant instr uctions on the safe and proper use of the mower .
OPERATION SIDE ROTARY Operation Section 3-12 © 201 1 Alamo Group Inc. OPERA TION HYDRAULIC LINE INSPECTION • Check for hydraulic leaks a long hoses, cylinders and fittings. IMPORT ANT : DO NOT use your hands to check for oil leaks. Use a piece of heavy p aper or cardboard to check for hydraulic oil le aks.
OPERATION SIDE ROTARY Operation Section 3-13 © 201 1 Alamo Group Inc. OPERA TION HYDRAULIC PUMP/OIL RESERVOIR • Check oil rese rvoir level and oil cond ition. (Add specific type oil if low) • Change hydraulic oil filter a nd hydraulic oil according to mainte nance schedule.
OPERATION SIDE ROTARY Operation Section 3-14 © 201 1 Alamo Group Inc. OPERA TION ROT AR Y HEAD INSPECTION • Inspect blades and bl ad e bolts for looseness and excessive wear . Rotate to 90° to make for checking easier . Replace damage d, worn, and missing blades as complete set s to maintain rot ary balance.
OPERATION SIDE ROTARY Operation Section 3-15 © 201 1 Alamo Group Inc. OPERA TION 7.2 Cutting Component Inspection Inspect blade p an and blade assembly for the following: OPS-U-0031 Inspect the Blades daily for abnormal wear .
OPERATION SIDE ROTARY Operation Section 3-16 © 201 1 Alamo Group Inc. OPERA TION 7.3 Blade Bolt Inspection Inspect Blade Bolt Head da ily for wear as followed: Inspect the Blade Bolt Heads d aily for abn ormal wear .
OPERATION SIDE ROTARY Operation Section 3-17 © 201 1 Alamo Group Inc. OPERA TION T ractor PRE-OPERA TION Inspection Mower ID#________________ Make ____________________ Date: ________________ Shift __.
OPERATION SIDE ROTARY Operation Section 3-18 © 201 1 Alamo Group Inc. OPERA TION Side Rotary Mower PRE-OPERA TION Inspection Mower ID#________________ Make ____________________ Date: ________________.
OPERATION SIDE ROTARY Operation Section 3-19 © 201 1 Alamo Group Inc. OPERA TION DRIVING THE TRACTOR AND IMPLEMENT Safe tractor transport requires the operator possess a thorough knowledge of the model being operated and precautions to t ake while driving with an att ached implem ent.
OPERATION SIDE ROTARY Operation Section 3-20 © 201 1 Alamo Group Inc. OPERA TION 7.4 St arting the T ractor The procedure to st art the tractor is model specific. Refer to the tractor operator ’s manual for starting procedures for your particular tractor .
OPERATION SIDE ROTARY Operation Section 3-21 © 201 1 Alamo Group Inc. OPERA TION 7.7 7.6 Driving the T ract or and Implement S tart off driving at a slow speed and gradually increase your speed while maintaining complete control of the tractor and unit.
OPERATION SIDE ROTARY Operation Section 3-22 © 201 1 Alamo Group Inc. OPERA TION Inclines and ditches should be approached along a line which is at an angle as shown.
OPERATION SIDE ROTARY Operation Section 3-23 © 201 1 Alamo Group Inc. OPERA TION Many varied objects , such as wire, cable, rope, or chains, can become ent angled in the operating part s of the mower head. These items could then swing outside the housing at greater velocities than the blad es.
OPERATION SIDE ROTARY Operation Section 3-24 © 201 1 Alamo Group Inc. OPERA TION Rotary Mowers ar e capable under adver se conditions of throwing objects for great distance s (300 feet or more) and ca using serious injury or death. Follow safety messag es carefully .
OPERATION SIDE ROTARY Operation Section 3-25 © 201 1 Alamo Group Inc. OPERA TION 9. Operating the Contro l V alves - Side Mount POSITION CONTROL V AL VE - Th e V a lve is located to the right of the operator at a convenient height o n a non-cab unit.
OPERATION SIDE ROTARY Operation Section 3-26 © 201 1 Alamo Group Inc. OPERA TION MOWER LIFT The handle nearest the ce nter of the tracto r , actuates the Lift Cylinder (Inboard). Pulling the valve handle back, towards th e operator , causes the Lift Cylinder to raise the Extension Arm.
OPERATION SIDE ROTARY Operation Section 3-27 © 201 1 Alamo Group Inc. OPERA TION MEASUREMENT OF HEAD PITCH 1. CUT MOWE R OFF AND ALLOW BLADES TO ST OP ROT A TING 2. Move machine to a flat, level area such as a concrete slab 3. Lower mower head to within several inches of th e ground but do not rest head on ground .
OPERATION SIDE ROTARY Operation Section 3-28 © 201 1 Alamo Group Inc. OPERA TION 9.1 Basic T roubleshooting Gu ide for First St art-up. a. Electrical solenoid valve does no t work - check wiring, possible faul ty switch, possible faulty solenoid.
OPERATION SIDE ROTARY Operation Section 3-29 © 201 1 Alamo Group Inc. OPERA TION 9.2 Control Location and Functions The side mower height is controlled with a two or thr ee spool valve and is coordinated as shown below . The optional three spool valve allows for the operation of a re ar rotary mower or side ditcher .
OPERATION SIDE ROTARY Operation Section 3-30 © 201 1 Alamo Group Inc. OPERA TION 9.3 Operating the Mower Only operate the mower from th e tr acto r oper ator’s seat with the se atbelt securely f astened. The tractor must be equipped with a ROPS in the raised position or a ROPS cab.
OPERATION SIDE ROTARY Operation Section 3-31 © 201 1 Alamo Group Inc. OPERA TION When rota ting part s are in motion, serious injury may occur if caution is not used or danger is not recognized. Never allow bystanders within 300 feet of the machine when in operation.
OPERATION SIDE ROTARY Operation Section 3-32 © 201 1 Alamo Group Inc. OPERA TION When encountering a very severe condition which causes the tractor to stall, disengage mower , start tractor , raise the mower from the cut. Shut tractor off and inspect the mo wer , blades an d disk for damage before engaging mower again.
OPERATION SIDE ROTARY Operation Section 3-33 © 201 1 Alamo Group Inc. OPERA TION All Safety Shields, Guards and Safety devices including (but not limited to) - the Deflectors, Chain Guards, S teel Guards, Gearbox Shields, PTO integral shields, an d Retractable Door Shields should be used and maintained in good working condition.
OPERATION SIDE ROTARY Operation Section 3-34 © 201 1 Alamo Group Inc. OPERA TION Never stand or allow another person to stand between a running tractor and the mower when disconnecting the impleme nt from the tractor . 9.4 Shutting Down the Implement T o shut down attached mower head, first brin g the tractor to a complete stop.
OPERATION SIDE ROTARY Operation Section 3-35 © 201 1 Alamo Group Inc. OPERA TION Always shut the T ractor completely down, place the transmission in park, and set the parking brake before yo u or anyone else attempts to connect or disconnect the Implement.
OPERATION SIDE ROTARY Operation Section 3-36 © 201 1 Alamo Group Inc. OPERA TION 12.1 T ransporting Mower TRANSPORTING UNDER THE UNIT’S OWN POWER When transportin g between job sites or between cutting passes, the following procedure should be followe d: 1.
OPERATION SIDE ROTARY Operation Section 3-37 © 201 1 Alamo Group Inc. OPERA TION Next, cap or plug the hose en ds and the ports on the solenoid valve and motor . For a cable lift mower disconnect the lif t cable from the head and secure the lo ose end ba ck on to t he ca b le with th e ca ble cle vis .
OPERATION SIDE ROTARY Operation Section 3-38 © 201 1 Alamo Group Inc. OPERA TION The SMV (Slow-Moving V ehic le) emblem is universal symbol used to alert drivers of the presence of equipmen t traveling on roadways at a slow speed. SMV signs are a triangular bright orange with reflective red trim for both easy day and night visibility .
OPERATION SIDE ROTARY Operation Section 3-39 © 201 1 Alamo Group Inc. OPERA TION Make certain that the “Slow Moving V ehicle” (SMV) sign is installed in such a way as to be clearly visible and legible. When transporting the Equipment use the T r acto r flashing warning lights and follow all local traf fic regulations.
OPERATION SIDE ROTARY Operation Section 3-40 © 201 1 Alamo Group Inc. OPERA TION Use adequately sized and rated tr ailers and equipment to transport the tractor a nd implement. Consult an authorized dealer to determin e the proper equipment required.
OPERATION SIDE ROTARY Operation Section 3-41 © 201 1 Alamo Group Inc. OPERA TION 13. TROUBLESHOOTING GUIDE HYDRAULIC CYLINDER NOT WOR KIN G - Check level of hydraulic fluid (see sight gauge on t ank). Check to see if pump is functioning properly by attempting to use a nother cylinder or pressure gauge.
OPERATION SIDE ROTARY Operation Section 3-42 © 201 1 Alamo Group Inc. OPERA TION.
Maintenanc e Sec tio n 4- 1 © 201 1 Alamo Group Inc. MAINTENANCE SECTION.
MAINTENANCE SIDE ROTARY Mainte nance Sec tio n 4- 2 © 201 1 Alamo Group Inc. MAINTENANCE GENERAL INSTRUCTIONS T iger Mowers are designed for high pe rformance and rugged durability , ye t with simplified maintenance. The purpose of this section of the manual is to help the operator in the reg ular serv icing of the mo wer .
MAINTENANCE SIDE ROTARY Mainte nance Sec tio n 4- 3 © 201 1 Alamo Group Inc. MAINTENANCE Do not modify or alter this Implement. Do not permit anyo ne to modify or alter th is Implement, any of its compon ents or any Imp lement func tion. (SG-8 ) Relieve hydraulic pressur e pr ior to doin g an y mainten ance or rep air work on the Implement.
MAINTENANCE SIDE ROTARY Mainte nance Sec tio n 4- 4 © 201 1 Alamo Group Inc. MAINTENANCE REGULAR MAINTENANCE The intervals at which regular servicing should be do ne are based on ho urs o f oper ation . Use th e tractors h our meter to determine when reg ular servicing is required.
MAINTENANCE SIDE ROTARY Mainte nance Sec tio n 4- 5 © 201 1 Alamo Group Inc. MAINTENANCE WEEKL Y OR EVER Y 40 HOURS ITEM SERVICE COMMENTS Rotary S pindle Lubricate Every 40 hours or weekly WEEKL Y OR.
MAINTENANCE SIDE ROTARY Mainte nance Sec tio n 4- 6 © 201 1 Alamo Group Inc. MAINTENANCE YEARL Y OR EVER Y 500 HOURS ITEM SERVICE COMMENTS S pindle Grease Change Motor to S pindle S pline Change Hydr.
MAINTENANCE SIDE ROTARY Mainte nance Sec tio n 4- 7 © 201 1 Alamo Group Inc. MAINTENANCE TROUBLESHOOTING SYMPTOMS CAUSE REMEDY Vibration Loose Bolts Check all bolts and tighten to recommended torq ue spec ifications in this section Cutter assembly a.
MAINTENANCE SIDE ROTARY Mainte nance Sec tio n 4- 8 © 201 1 Alamo Group Inc. MAINTENANCE TROUBLESHOOTING (CONTINUED) b. Remove the four bolt s holding the small block to the main block. Lift and remove small block bei ng careful no t to damage O - rings/filter .
MAINTENANCE SIDE ROTARY Mainte nance Sec tio n 4- 9 © 201 1 Alamo Group Inc. MAINTENANCE T ORQUE SPECIFICA TIONS.
MAINTENANCE SIDE ROTARY Mainte nance Section 4-10 © 201 1 Alamo Group Inc. MAINTENANCE LUBRICA TION RECOMMENDA TIONS DESCRIPTION APPLICA TION GENERAL SPECIFICA TION RECOMMENDED MOBIL LUBRIC ANT T rac.
MAINTENANCE SIDE ROTARY Mainte nance Section 4-11 © 201 1 Alamo Group Inc. MAINTENANCE POL Y CARBONA TE CARE & MAINTENANCE The propriet ary UV and Abrasion Resist ant surf ace coating on SHIELDS SUPERCOA TED polycar bonate significantly improves performa nce.
MAINTENANCE SIDE ROTARY Mainte nance Section 4-12 © 201 1 Alamo Group Inc. MAINTENANCE RECOMMENDED FILLING INSTR UCTIONS FOR HYDRAULIC RESER VOIRS When filling or checking the oil level, the unit should be park ed on a level surface., shut “OFF” , and allow suf ficient time to cool to ambient temperature.
MAINTENANCE SIDE ROTARY Mainte nance Section 4-13 © 201 1 Alamo Group Inc. MAINTENANCE REPLACING HIGH PR ESSURE HYDRAULIC FIL TER ELEMENT Assure system has been shut down and depressurized. Locate High Pressure Filte r housing. Conf irm that the elem ent that is about to be installed matches the element p/ n on the filter model t ag.
MAINTENANCE SIDE ROTARY Mainte nance Section 4-14 © 201 1 Alamo Group Inc. MAINTENANCE GREASING THE UPPER AND LOWER SHEA VES Locate the grease zerks on the ends of th e upper and lower sheave p ins as shown below .
MAINTENANCE SIDE ROTARY Mainte nance Section 4-15 © 201 1 Alamo Group Inc. MAINTENANCE GREASING INNER AN D OUTER DRAFT BE AM PIVOT POINTS Locate the grease ze rks on the inne r and outer dr aft beam pivot bosses.
MAINTENANCE SIDE ROTARY Mainte nance Section 4-16 © 201 1 Alamo Group Inc. MAINTENANCE DRIVE SHAFT YOKE, U-JOINT & STUB SHAFT With engine stopped, inject Lith ium-Complex extr eme pressure gr ease conforming to NLGI2-ISO 32 0 specifications into universal joints a nd slip yoke until grease appears at the seal.
MAINTENANCE SIDE ROTARY Mainte nance Section 4-17 © 201 1 Alamo Group Inc. MAINTENANCE BALL V AL VES The ball valves at the hydraulic reservoi r may need to be closed during cert ain maintenance or repa ir procedures.
MAINTENANCE SIDE ROTARY Mainte nance Section 4-18 © 201 1 Alamo Group Inc. MAINTENANCE GREASING MOTOR SPLINE T O SPINDLE SPLINE For direct drive mo wers, locate motor spline and spin dle spline on the mower deck. Grease splines with Mobil moly 52. Use about 4 ounces of grease.
MAINTENANCE SIDE ROTARY Mainte nance Section 4-19 © 201 1 Alamo Group Inc. MAINTENANCE Blades Check the Blades for cracks and w ear and Blade Bolts for tightness, daily . Blades should be replaced when they are worn excessively , bent, deformed, or out of balance.
MAINTENANCE SIDE ROTARY Mainte nance Section 4-20 © 201 1 Alamo Group Inc. MAINTENANCE ROT AR Y KNIFE REPLACEMENT 1. Be sure you have a complete matchi ng set of new knives for replacement. 2. Remove knives and inspect ho les for dama ge. Also wa tch for crac ks in the di sk around the holes.
HEA VY DUTY SPINDLE ASSEMBL Y INST ALLA TION AND BEARING ADJUSTMENT A press MUST be used to insta ll bearing cups, bearing con es, and seals. DO NOT use a hammer to inst all races, bearings, or seal s. The part s of assembly may be damaged. NOTE: The grease zerk and gusset s are located on th e top side of the spindle hou sing.
MAINTENANCE SIDE ROTARY Mainte nance Section 4-22 © 201 1 Alamo Group Inc. MAINTENANCE BEARING INST ALLA TION 1. Press upper bearin g cup into the spindle housing 2. T urn the spindle housing over and press in the lower bearing cup. 3. Place the lower bearin g cone in the b earing cup.
MAINTENANCE SIDE ROTARY Mainte nance Section 4-23 © 201 1 Alamo Group Inc. MAINTENANCE DAIL Y MAINTENANCE SCHEDULE The following services should be perform ed daily or every 8 hours of service, following the detaile d maintenance instructions in th e operators manual.
MAINTENANCE SIDE ROTARY Mainte nance Section 4-24 © 201 1 Alamo Group Inc. MAINTENANCE.
P ARTS SECTION J D 5 XX5M - TM/ TS R.
NOTES.
PART NAME INDEX PARTS ORDERING GUIDE ......................................................................................................................................................................... 4 NOTES ....................................
PARTS ORDERING GUIDE ©2011 Alamo Group Inc. Parts Section 5-4 JD5XX5 TM,TSR.
NOTES ©2011 Alamo Group Inc. Parts Section 5-5 JD5XX5 TM,TSR.
TRACTOR MOUNT KIT ©2011 Alamo Group Inc. Parts Section 5-6 JD5XX5 TM,TSR.
TRACTOR MOUNT KIT Continued... ITEM PART NO. QTY. DESCRIPTION 1 06300109 1 MAIN FRAME --- 06300124 1 MNFRM,LDR (LOADER MOUNT) 2 06410898 1 UPRIGHT,LH 3 06410899 1 UPRIGHT,RH 4 06300111 1 AXLE BRC,LH 5.
TRACTOR MOUNT KIT - HYDRAULICS ITEM PART NO. QTY. DESCRIPTION 1 23152 1 PUMP 2 06370109 1 COUPLER 3 06420118 1 DRV SHFT,23.75" (JD5095 - 5105M TRACTORS) 4 LVB24989 1 JD PULLEY KIT (JD5095 - 5105M TRACTORS) 5 06530002 4 CAPSCREW,SKT HD,10MM X 75MM,1.
TRACTOR MOUNT KIT - HYDRAULICS Continued... ITEM PART NO. QTY. DESCRIPTION --- 06700091 1 TANK,RES,ASSY,WHEEL WELL 9 06380015 1 TANK,RES,WHEEL WELL 10 06505067 1 SIGHT GAUGE 11 06505044 1 FLTR ASSY,IN.
2 SPOOL CABLE CONTROL STAND ©2011 Alamo Group Inc. Parts Section 5-10 JD5XX5 TM,TSR.
2 SPOOL CABLE CONTROL STAND Continued... ITEM PART NO. QTY. DESCRIPTION 1 31923 1 BRKT,CTRL,CBL 2 6T1251 2 CBL CTRL BOX,180 DEG 3 06510102 1 SWITCH BOX,SIDE 4 34496 1 BRKT,SWITCH BOX 5 6T3951 2 SCREW,.
CABLE (MANUAL) LIFT VALVE - 2 SPOOL ©2011 Alamo Group Inc. Parts Section 5-12 JD5XX5 TM,TSR.
CABLE (MANUAL) LIFT VALVE - 2 SPOOL Continued... ITEM PART NO. QTY. DESCRIPTION 1 06502058 1 VALVE,2SP,OC (COMBO LIFT DRAFT BEAM) --- 24500 1 VALVE,2SP,OC (CABLE LIFT DRAFT BEAM) 2 06340033 1 VALVE MN.
CABLE (MANUAL) LIFT VALVE BREAKDOWN - 06502058 ©2011 Alamo Group Inc. Parts Section 5-14 JD5XX5 TM,TSR.
CABLE (MANUAL) LIFT VALVE BREAKDOWN - 06502058 Continued... ITEM PART NO. QTY. DESCRIPTION 1 TB1017S 1 INLET END COVER 2 TB1701 1 END COVER,OPEN CENTER 3 TB1017P 1 VALVE SECTION (SINGLE ACTING,SPRING .
CABLE (MANUAL) LIFT VALVE BREAKDOWN - 24500 ©2011 Alamo Group Inc. Parts Section 5-16 JD5XX5 TM,TSR.
CABLE (MANUAL) LIFT VALVE BREAKDOWN - 24500 Continued... ITEM PART NO. QTY. DESCRIPTION 1 TB1017S 1 INLET END COVER 2 TB1701 1 END COVER,OPEN CENTER 3 TB1017P 1 VALVE SECTION (SINGLE ACTING,SPRING DET.
WHEEL SPACER ITEM PART NO. QTY. DESCRIPTION 1 06770025 1 KIT,SPCR,WHL,JD 2 06400919 2 RING,SPACER,WHEEL,JD ©2011 Alamo Group Inc. Parts Section 5-18 JD5XX5 TM,TSR.
HOSE GUIDE ON HD DRAFT BEAM ITEM PART NO. QTY. DESCRIPTION 1 28955D 1 HD COMBO DRAFT BEAM 2 21627 2 NYLOCK NUT,3/8",NC 3 06370164 1 HOSE GUIDE 4 21632 2 CAPSCREW,3/8" X 1-1/2",NC ©2011 Alamo Group Inc.
NOTES 1 ©2011 Alamo Group Inc. Parts Section 5-20 JD5XX5 TM,TSR.
P ARTS SECTION COMMON SIDE ROTARY.
NOTES.
PART NAME INDEX PARTS ORDERING GUIDE ......................................................................................................................................................................... 5 CABLE DRAFT BEAM ASSEMBLY ................
PART NAME INDEX FIRE SUPRESSION SYSTEM ELECTRICAL SCHEMATIC .................................................................................................................. 68 WETCUT...................................................................
PARTS ORDERING GUIDE ©2011 Alamo Group Inc. Parts Section 6-5 COMMON SIDE ROTARY.
CABLE DRAFT BEAM ASSEMBLY ©2011 Alamo Group Inc. Parts Section 6-6 COMMON SIDE ROTARY.
CABLE DRAFT BEAM ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 1 6T0105 - DRAFT BEAM (STD WITH TRAVEL LOCK) ------- 27241 - DRAFT BEAM (EXTENDED 6”) 2 6T0150 1 CYLINDER 3” X 18” 3 6T0151R 1 HYD.
COMBO DRAFT BEAM ASSEMBLY ©2011 Alamo Group Inc. Parts Section 6-8 COMMON SIDE ROTARY.
COMBO DRAFT BEAM ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 1 06350001 1 COMBO DRAFT BEAM - STD DTY ROTARY --- 31063 - COMBO DRAFT BEAM - HVY DTY ROTARY 2 6T0151R 1 HYD. CYLINDER 3” X 10” 3 32215 1 HYD. CYLINDER 3” X 12” - STD DTY --- 25343 - HYD.
60IN SIDE CABLE TM ROTARY MOWER ©2011 Alamo Group Inc. Parts Section 6-10 COMMON SIDE ROTARY.
60IN SIDE CABLE TM ROTARY MOWER Continued... ITEM PART NO. QTY. DESCRIPTION 1 32099 1 RTRY, 60" DECK, CABLE 2 31773 1 GAURD,CHAIN,FRONT,SR60 3 6T1001 1 BRKT, MOTOR MTG, 60"SIDE RTRY 4 6T0820.
72IN SIDE CABLE TM ROTARY MOWER ©2011 Alamo Group Inc. Parts Section 6-12 COMMON SIDE ROTARY.
72IN SIDE CABLE TM ROTARY MOWER Continued... ITEM PART NO. QTY. DESCRIPTION 1 21225B 1 RTRY,72" DECK, CABLE 2 31931 1 GAURD,CHAIN,FRONT,SR72 3 6T1001 1 BRKT, MOTOR MTG, 60"SIDE RTRY 4 21248 .
60IN SIDE COMBO TM ROTARY MOWER ©2011 Alamo Group Inc. Parts Section 6-14 COMMON SIDE ROTARY.
60IN SIDE COMBO TM ROTARY MOWER Continued... ITEM PART NO. QTY. DESCRIPTION 1 30087D 1 RTRY, 60" DECK, COMBO - STD DUTY --- 32617 1 RTRY, 60” DECK, COMBO - HEAVY DUTY 2 31773 1 GUARD,CHAIN,FRON.
72IN SIDE COMBO TM ROTARY MOWER ©2011 Alamo Group Inc. Parts Section 6-16 COMMON SIDE ROTARY.
72IN SIDE COMBO TM ROTARY MOWER Continued... ITEM PART NO. QTY. DESCRIPTION 1 34260 1 RTRY, 72" DECK, COMBO - STD DUTY --- 31408A 1 RTRY, 72” DECK, COMBO - HEAVY DUTY 2 31931 1 GUARD,CHAIN,FRON.
60IN SIDE TM CHAIN GUARDS ©2011 Alamo Group Inc. Parts Section 6-18 COMMON SIDE ROTARY.
60IN SIDE TM CHAIN GUARDS Continued... ITEM PART NO. QTY. DESCRIPTION --- 31773 - GUARD,CHAIN,TM60,FRONT,ASSY 1 31762 1 GUARD,CHAIN,TM60,FRONT 2 28407 12 CABLE,5/16",BULK (QTY IN FEET) 3 22993 77.
72IN SIDE TM CHAIN GUARDS ©2011 Alamo Group Inc. Parts Section 6-20 COMMON SIDE ROTARY.
72IN SIDE TM CHAIN GUARDS Continued... ITEM PART NO. QTY. DESCRIPTION --- 31931 - GUARD,CHAIN,TM72,FRONT,ASSY 1 31863 1 GUARD,CHAIN,TM72,FRONT 2 28407 14 CABLE,5/16",BULK (QTY IN FEET) 3 22993 91.
60IN SIDE TSR ROTARY MOWER ©2011 Alamo Group Inc. Parts Section 6-22 COMMON SIDE ROTARY.
60IN SIDE TSR ROTARY MOWER Continued... ITEM PART NO. QTY. DESCRIPTION 1 34975 1 HEAVY DUTY GRASSKAT COMBO ------ 06320005 1 STD DUTY GRASSKAT COMBO ------- 06320008 1 HEAVY DUTY GRASSKAT CABLE 2 3498.
60IN SIDE TSR REAR GUARDS ©2011 Alamo Group Inc. Parts Section 6-24 COMMON SIDE ROTARY.
60IN SIDE TSR REAR GUARDS Continued... ITEM PART NO. QTY. DESCRIPTION 1 34973 2 ROD,CHAIN,OUTER,TM60 2 34974 2 ROD,CHAIN,INNER,TM60 3 21631 16 CAPSCREW, 3/8 X 1-1/4,NC 4 34972 4 PLATE,CAP,CHAIN 5 2162.
SIDE ROTARY CASTER WHEEL ASSEMBLY ©2011 Alamo Group Inc. Parts Section 6-26 COMMON SIDE ROTARY.
SIDE ROTARY CASTER WHEEL ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 1 25214C 1 FRAME,CASTER,WHL (TM60) --- 28297A - FRAME,CASTER WHL (TM72) 2 22057 1 SPINDLE,CASTER AXLE,ASSY 3 6T2617 2 BUSH.
CASTER WHEEL ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 1 21459 1 SPINDLE,CASTER WHEEL AXLE 2 21987 5 LOCKWASHER,5/16” 3 21575 5 HEX NUT,5/16” 4 28548 5 CAPSCREW,5/16” X 3/4”,NC 5 22697 1 RIM,OUT.
ROTARY DISK AND KNIVES ITEM PART NO. QTY. DESCRIPTION 1 34876 1 BLADE MOUNTING DISK 2 6T1023R 2 NYLOCK NUT,1-1/8” 3 34878 2 SPACER 4 34497 2 KNIFE MOUNTING BOLT 5 34685 2 KNIFE,60" HIGH SUCTION.
TM MOWER SPINDLE ASSEMBLY ©2011 Alamo Group Inc. Parts Section 6-30 COMMON SIDE ROTARY.
TM MOWER SPINDLE ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION ------ 6T1024H5 - SPINDLE ASSEMBLY COMPLETE 1 6T1031 1 SPROCKET 2 6T1016 1 BEARING LOCK NUT - THICK 3 22596 1 JAM WASHER 4 6T1015 .
TSR MOWER SPINDLE ASSEMBLY ©2011 Alamo Group Inc. Parts Section 6-32 COMMON SIDE ROTARY.
TSR MOWER SPINDLE ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION ------ 34980 - SPINDLE ASSEMBLY COMPLETE 1 34978 1 SPINDLE MOUNT 2 34979 1 SPINDLE,TM60 3 6T1013 1 BEARING CUP 4 6T1012 1 BEARING.
60IN AND 72IN ROTARY MOTOR BREAKDOWN ©2011 Alamo Group Inc. Parts Section 6-34 COMMON SIDE ROTARY.
60IN AND 72IN ROTARY MOTOR BREAKDOWN Continued... ITEM PART NO. QTY. DESCRIPTION 06504011 - MOTOR ASSEMBLY,TM60 06504018 - MOTOR ASSEMBLY,TM72 1 22790 1 END,COVER 2 06504088 1 HOUSING, PEC 3 06504062 .
60IN TSR ROTARY MOTOR BREAKDOWN ©2011 Alamo Group Inc. Parts Section 6-36 COMMON SIDE ROTARY.
60IN TSR ROTARY MOTOR BREAKDOWN Continued... ITEM PART NO. QTY. DESCRIPTION 06504016 - MOTOR(M365-1 1/4SPLINE),SEALED 1 22790 1 COVER,END 2 06504088 1 HOUSING,PEC 3 06504111 1 HOUSING,GEAR 4 06504110 .
FRONT HYDRAULIC PUMP BREAKDOWN ITEM PART NO. QTY. DESCRIPTION ------ 23152 - PUMP ASSEMBLY 1 3/4” COMPLETE 1 22765 1 SEAL 2 22766 1 SHAFT END COVER 3 22767 2 CHECK AND END COVER 4 22768 2 BUSHING 5 .
RESERVOIR TANK FILTER ASSEMBLY ITEM PART NO. QTY. DESCRIPTION ------ 06505044 - FILTER ASSY SAE 10 MICRON 1 28583 4 CAPSCREW,8MM X 25MM(1.25 PITCH) 2 06505045 1 COVER 3 06505046 1 SEAL KIT 4 06505047 1 SPRING 5 06505048 1 BYPASS 6 35259 1 FILTER,10 MIC,RETURN LINE 7 06505049 1 CAN/BODY ©2011 Alamo Group Inc.
COOLER ASSEMBLY ©2011 Alamo Group Inc. Parts Section 6-40 COMMON SIDE ROTARY.
COOLER ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 1 21530 10 CAPSCREW,1/4 X1 NC 2 21986 10 LOCKWASHER,1/4 3 22014 10 FLATWASHER,1/4 4 35176 10 1/4 U-NUT 5 06370015 1 SCREEN,COOLER,FRNT 6 063.
3IN X 10IN HYDRAULIC CYLINDER BREAKDOWN ITEM PART NO. QTY. DESCRIPTION ------ 6T0151R - HYD. CYLINDER 3" X 10" 1 6T0167 1 CYLINDER BUTT 2 6T0170 1 CYLINDER GLAND 3 6T0178 1 CLEVIS END 4 6T01.
3IN X 12IN HYDRAULIC CYLINDER BREAKDOWN ITEM PART NO. QTY. DESCRIPTION ------ 32215 - HYD. CYLINDER 3" X 12" (STD DUTY) 25343 - HYD. CYLINDER 3" X 12" (HVY DUTY) 1 6T0167 1 CYLINDE.
3IN X 18IN HYDRAULIC CYLINDER BREAKDOWN ITEM PART NO. QTY. DESCRIPTION ------ 6T0150 - CYLINDER 3" X 18" 1 6T0167 1 CYLINDER BUTT 2 6T0170 1 CYLINDER GLAND 3 6T0178 1 CLEVIS END 4 6T0165 1 C.
NOTES 1 ©2011 Alamo Group Inc. Parts Section 6-45 COMMON SIDE ROTARY.
CABLE (MANUAL) LIFT VALVE BREAKDOWN - 30801 ©2011 Alamo Group Inc. Parts Section 6-46 COMMON SIDE ROTARY.
CABLE (MANUAL) LIFT VALVE BREAKDOWN - 30801 Continued... ITEM PART NO. QTY. DESCRIPTION 1 TB1017S 1 INLET END COVER 2 TB1702 1 END COVER, POWER BEYOND 3 TB1017P 1 VALVE SECTION (SINGLE ACTING, SPRING .
CABLE (MANUAL) LIFT VALVE BREAKDOWN - 31320 ©2011 Alamo Group Inc. Parts Section 6-48 COMMON SIDE ROTARY.
CABLE (MANUAL) LIFT VALVE BREAKDOWN - 31320 Continued... ITEM PART NO. QTY. DESCRIPTION 1 31595 1 INLET END COVER 2 31594 1 END COVER, LOAD SENSE 3 31597 1 VALVE SECTION (DOUBLE ACTING, CENTER SPRING).
CABLE (MANUAL) LIFT VALVE BREAKDOWN - 31321 ©2011 Alamo Group Inc. Parts Section 6-50 COMMON SIDE ROTARY.
CABLE (MANUAL) LIFT VALVE BREAKDOWN - 31321 Continued... ITEM PART NO. QTY. DESCRIPTION 1 31595 1 INLET END COVER 2 31594 1 END COVER, LOAD SENSE 3 31597 1 VALVE SECTION (DOUBLE ACTING, CENTER SPRING).
CABLE (MANUAL) LIFT VALVE BREAKDOWN - 31752 ©2011 Alamo Group Inc. Parts Section 6-52 COMMON SIDE ROTARY.
CABLE (MANUAL) LIFT VALVE BREAKDOWN - 31752 Continued... ITEM PART NO. QTY. DESCRIPTION 1 TB1017S 1 INLET END COVER 2 TB1702 1 END COVER, POWER BEYOND 3 TB1017P 1 VALVE SECTION (SINGLE ACTING, SPRING .
CABLE (MANUAL) LIFT VALVE BREAKDOWN - 06502040 ©2011 Alamo Group Inc. Parts Section 6-54 COMMON SIDE ROTARY.
CABLE (MANUAL) LIFT VALVE BREAKDOWN - 06502040 Continued... ITEM PART NO. QTY. DESCRIPTION 1 31595 1 INLET END COVER 2 31594 1 END COVER, LOAD SENSE 3 31597 1 VALVE SECTION (DOUBLE ACTING, CENTER SPRI.
CABLE (MANUAL) LIFT VALVE BREAKDOWN - 06502042 ©2011 Alamo Group Inc. Parts Section 6-56 COMMON SIDE ROTARY.
CABLE (MANUAL) LIFT VALVE BREAKDOWN - 06502042 Continued... ITEM PART NO. QTY. DESCRIPTION 1 31595 1 INLET END COVER 2 31594 1 END COVER, LOAD SENSE 3 31600 1 VALVE SECTION (DOUBLE ACTING, DETENT FLOA.
BRAKE VALVE ASSEMBLY ITEM PART NO. QTY. DESCRIPTION * 06510083 - BRAKE VALVE, ASSY 1 34092 1 BRAKE VALVE, BLANK 2 34094 2 LOGIC ELEMENT 3 34095 1 RELIEF VALVE, 3000 PSI 4 06510095 1 METRI PAK COIL 5 34093 1 CARTRIDGE, 2 POSITION, 3 WAY (WITH NUT & WASHER) 6 34091 1 RELIEF VALVE, 2600 PSI ©2011 Alamo Group Inc.
BRAKE VALVE HYDRAULIC SCHEMATIC ©2011 Alamo Group Inc. Parts Section 6-59 COMMON SIDE ROTARY.
CABLE DRAFT BEAM TRAVEL LOCK ITEM PART NO. QTY. DESCRIPTION 1 ------ - CABLE DRAFT BEAM 2 6T0106 1 TRAVEL LOCK BRACKET 3 6T0107 2 TRAVEL LOCK PINS 3/4” X 3 1/4” 4 6T3020 2 R - CLIP 5/32” 5 21833.
COMBO DRAFT BEAM TRAVEL LOCK ITEM PART NO. QTY. DESCRIPTION 1 ------ - COMBO DRAFT BEAM 2 6T0106 1 TRAVEL LOCK BRACKET 3 21833 1 CAPSCREW 3/4” X 2 1/4” 4 ------ - MAIN FRAME *REFER TO PARTS SECTIO.
SWITCH BOX ITEM PART NO. QTY. DESCRIPTION 1 06514013 1 SWBX,ALUM,BLK,06510102 2 35226 1 SWITCH,MOWER,COLEHERSEE 3 33811 1 SWITCH,MASTER/DECK FLOAT 4 6T3923 1 INDICTATOR LIGHT,ON,RED 5 06514014 1 BREAKER,10A,SWBX 6 34540 1 STRAIN RELIEF,3/4,BLACK,NYLON 7 06550018 1 DECAL,SWTCHBX,TM/TSF,CG 8 35227 1 RELAY,DP,DT,12V,LY2F,35226 ©2011 Alamo Group Inc.
SWITCH BOX SCHEMATIC ©2011 Alamo Group Inc. Parts Section 6-63 COMMON SIDE ROTARY.
NOTES 2 ©2011 Alamo Group Inc. Parts Section 6-64 COMMON SIDE ROTARY.
FIRE SUPRESSION SYSTEM ©2011 Alamo Group Inc. Parts Section 6-65 COMMON SIDE ROTARY.
FIRE SUPRESSION SYSTEM PARTS ©2011 Alamo Group Inc. Parts Section 6-66 COMMON SIDE ROTARY.
FIRE SUPRESSION SYSTEM PARTS Continued... ITEM PART NO. QTY. DESCRIPTION 1 06520357 1 TANK,FIRE SUPRESS SYS 2 06520358 1 MNT,TANK,FIRE KIT 3 06520359 1 PUMP,FIRE SUPRESS SYS 4 6T2181 4 CAPSCREW,SKT HD.
FIRE SUPRESSION SYSTEM ELECTRICAL SCHEMATIC ©2011 Alamo Group Inc. Parts Section 6-68 COMMON SIDE ROTARY.
WETCUT ©2011 Alamo Group Inc. Parts Section 6-69 COMMON SIDE ROTARY.
WETCUT 50 GALLON TANK MOUNT ITEM PART NO. QTY. DESCRIPTION 1 06370128 1 MNT,3PNT,UNI 2 06370136 1 MNT,TANK,50GAL,WETCUT 4 06520342 1 TANK,50GA.,WETCUT 7 RD1032 3 PIN,LYNCH 1/4" X 2" 8 TB1036.
WETCUT 100 OR 150 GALLON TANK MOUNT ITEM PART NO. QTY. DESCRIPTION 1 06370128 1 MNT,3PNT,UNI 2 06370138 1 MNT,TANK,100GAL,WETCUT ------ 06370139 - MNT,TANK,150GAL,WETCUT 4 06520372 1 TANK,100GA.
WETCUT TANK PLUMBING ©2011 Alamo Group Inc. Parts Section 6-72 COMMON SIDE ROTARY.
WETCUT TANK PLUMBING Continued... ITEM PART NO. QTY. DESCRIPTION 1 06370128 1 MNT,3PNT,UNI 2 06520336 1 CNTRLR,SENSOR,06520333 3 06520341 1 PUMP,WETCUT 4 06520346 1 FITTING,BULKHEAD,WETCUT 5 06520347 .
WETCUT SPRAYER HEAD ASSEMBLY ©2011 Alamo Group Inc. Parts Section 6-74 COMMON SIDE ROTARY.
WETCUT SPRAYER HEAD ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 1 06370105 1 HOOD,SPRAYER 2 06370106 1 HINGE,LH,SPRAYER 3 06370107 1 HINGE,RH,SPRAYER 4 06370108 1 HINGE,CNTR,SPRAYER 5 0641066.
WETCUT CABLES ©2011 Alamo Group Inc. Parts Section 6-76 COMMON SIDE ROTARY.
W ARRANTY SECTION Warranty Section 7-1.
..
W ARRANTY INFORMA TION T iger Corporation, 3301 N. Louise, Sioux Falls, South Dakota, warrant s to the original Retail Customer , the new T iger equipment is free of defects in material and workmanship.
ONE LAST WORD This manual cannot possibly cover all of the potentially hazardous situations you will encounter . By being familiar with the safety rules, operating and maintenance instructions in this manual you can help prevent accidents. The objective of this manual is to help make you a better operator .
T O THE OWNER / OPERA TOR / DEALER T o keep your implement running ef ficiently and safely , read your manual thoroughly and follow these directions and the Safety Messages in this manual and on the machine. The table of contents clearly identifies each section where you can easily find the information you need.
Printed in USA © T iger Corporation.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Tiger Products Co., Ltd JD 5065 / 5085 - 5105M è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Tiger Products Co., Ltd JD 5065 / 5085 - 5105M - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Tiger Products Co., Ltd JD 5065 / 5085 - 5105M imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Tiger Products Co., Ltd JD 5065 / 5085 - 5105M ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Tiger Products Co., Ltd JD 5065 / 5085 - 5105M, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Tiger Products Co., Ltd JD 5065 / 5085 - 5105M.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Tiger Products Co., Ltd JD 5065 / 5085 - 5105M. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Tiger Products Co., Ltd JD 5065 / 5085 - 5105M insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
