Manuale d’uso / di manutenzione del prodotto 4500R del fabbricante Thecus
Vai alla pagina of 92
Thecus 1U4500R 1U4500S User’s Manual.
2 Copyright and T rademark Notice Thecus and other name s of Thecus products are registered trademarks of Thecus Technology Corp. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. Appl e, iTunes and Apple OS X are registered trademarks of Apple Computers, Inc.
3 Safety W arnings For your safety, please read and fo l low the foll owing safety warnings: Read this manual t horoughly bef ore attempting to set up your 1U450 0. Your 1U4500 is a complicated electron ic device. DO NOT attempt to repair it under any circumstances.
4 T able of Content s Copyright and Trademark Notice ................................................... 2 About This Manual ......................................................................... 2 Limited Warranty..................................
5 Power Mana gement ............................................................................ 25 Storage Management .......................................................................... 26 Disks Inform ation ...................................
6 Overview ............................................................................................. 61 Login Page........................................................................................... 61 Using WebDisk ........................
7 Overview ............................................................................................. 83 What is Active Dire ctory? .................................................................... 83 ADS Benefits................................
8 Chapter 1: Introduction Overview Thank you for choosing the Thecus 1U 4500 1U Rackmount Storage Server. The Thecus 1U4500 is an easy-to-use storage se rver that allows a dedicated approach to storing and distributing data on a ne twork.
Redundant Pow er Supply (1U4500R) The redundant power supply included with the 1U4500R ensures maxim um uptime in the event of a fa ilure of one of the po wer s uppl ies.
Hard Disk Trays Each of the 1U4500’s hard disk tra ys has a lock, a latch, and two LED indicators: Hard Disk Trays Item Description Lock • Use the lock to physically secure the hard disk to the un.
Chapter 2: Hardware Inst allation Overview Your 1U4500 is designed for easy in stallation. To h elp you get started, th e fol lowing chapter will help you quickly get your 1U4500 up and ru nning. Pl ease read it carefully to prevent damaging yo ur unit during installation.
2. Connect the provided p ower cord into the universal power socket o n the ba ck panel. Plug the other end of the cord into a surge pro tector socket. Press the power su pply switch to turn on the power supply. If you are ins talling the 1U 4500R, be sure t o connect bo th power cables .
Chapter 3: First T ime Setup Overview Once the hardware is installed, ph ysically connected to your network , and powered on, you can configure the 1U4500 so that it is accessible to your network users. T here are two ways to set up your 1U4500: using the Thecus Setup Wizard or the LCD display .
6. Name your 1U4500 and configure the netw ork IP address. If your switch or router is configured as a DH CP Server, configuri ng t he 1U4500 to automatically obtain an IP address is recommend ed. You may also use a static IP address and enter the DNS Server address manually.
The Thecus Setup Wizard is designed for installation on systems running Windows XP/2000 or Mac OSX or later. Users with other operating systems will need to install the Thecus Setup Wizard on a host machine with one of th ese operating systems before usin g the unit.
The 1U4500 will rotate these messages every one-two seconds on the LCD display. USB Copy The USB Copy function enable s you to copy files stored on USB devices suc h as USB disks and digit al cameras to the 1U4500 with a press of a bu tton. To use USB copy, follow the s teps below: 1.
17 Step 1: Network Setup From the Web Administration Interf ace, you can configure the network settings of the 1U4500 for your networ k. Yo u can access the Network menu fro m the menu bar. For details on ho w to configure your net work settings, refer to Chapter 4: System Management > Network Management .
18 File Transfer Protocol (FTP) Printer Server.
Chapter 4: System Management Overview The 1U4500 pro vides an easily accessible Web Administ ration Interfac e . With it, you can configure a nd monitor the 1U450 0 any where on the network. Web Administration Interface Make sure your network is connec ted to the Internet.
1U4500. Network Information and settings for network connections, as well as various services of the 1U4 500. Accounts Allows configuration of users and groups. System Various 1U4500 system settings and in formation. Language Choose your preferred language here.
Status Menu The Status Menu o n the menu bar allo ws you to see various aspe cts of the 1U4500. From here, you can disco ver the st atus of the 1 U4500, and even find out other details like firmware version and up time. Product Information Once you login, you will first see the basi c Product Information screen providing Manufacturer , Product No.
Item Description AFP Status The status of the Apple Filing Protocol server. NFS Status The status of the Network File Service Server. SMB/CIFS Status The status of the SMB/CIFS server. FTP Status The status of the FTP ser ver. Media Server The status of the Media Server Nsync Status The status of the Nsync server.
Status Displays the st atus of the USB printer. Remove document from Queue Click to remove all documents from printer queue Restart Printer service Click to restart printer service If a corrupt print job is sent to a printe r, prin ting may sudden ly fail.
Wake-Up On Lan (WOL) The 1U4500 has the ability to be awoken from sleep mode via WAN port. From the Status menu, choose the WOL item, and the Wake-up On Lan Configuration screen appears. From here, you can En able o r Disable . Wake-up On Lan Configuration Item Description WOL Servic Enable or Disable WOL service Apply Click Apply to save changes.
Power M anagement Using the 1U4500’s Power Management, you can s ave energy and money by scheduling the 1U 4500 to turn itself on and off during certain times of the day. 25 From the Status menu, choose the Power Mgmt item and the Schedule Power On/O ff screen appears.
Storage Management The Storage Menu displays the status of storage devices installed in the 1U4500, and includes storage co nfiguration options such as RAID and disk settings, folder configuration, and Nsync settings. Disks Information From the Storage menu, choose the Disks item and the Disks Information screen appears.
S.M.A.R.T. Information Item Description Tray Numb er Tray the hard disk is ins talled in. Model Model name of the installed hard di sk. Power ON Hours Count of hours in power-on state. The raw value of this attribute shows total count of hours (or minutes, or seconds, depending on manufacturer) in power-on state.
To configure your RAID settings, press the RA ID Config button to go to the RAID Configuration screen. RAID Information Item Description Select Used to select the current RAID volume. Master RAID The RAID volume currently designated as the Master RAID volume.
RAID 6 Two independent parity computations must be used in order to provide protection against double disk fail ure. Two different algorithms are employed to achi eve this purpose. RAID 6 requires a minimum of 4 disks. RAID 6 can sustain two failed disks.
4. If this RAID volume is meant to be the Master RAID volume, ti ck the Master RAID check box. In a mu ltip le RAI D conf iguration, one RAID volume must be designated as th e Master RAID volu me. The Mast er RAID volume will store all installed modules.
Migrating a RAID Once a RAID volume has been created , you may want to move i t to other physical drives or cha nge the RAID array all together. To migrate a RAID 0, RAID 1, or RAID 5 volume, follow the steps below: 1. From the RA ID Configuration screen, click Migrate RAID.
Space Allocation You may specify the space allocated for both Target USB and iSCSI vo lumes. To do this, under the Storage menu, cli ck RAID and the RAID List window appears. Select the RAID volume you wish to reallocate by clicking on its radio button, and cl ick Space Allocat ion .
3. Click OK to create the Target USB volume. Allocating Space for iS CSI Volume To allocate space for an iSC SI volume on the current RAID volume, follow the steps below: 1. Under the Volume Allocation List , click iSCSI Target . The Create iSCSI Volume screen appears.
34 4. Choose to enable CHAP authenticati on or cho ose None . 5. Enter a Target Name . This will be u sed by the Stack able NAS function to identify this export share. 6. Choose the current year from the Year dropd own. 7. Choose the current month from the Mon th dropdown.
Folder Management From the Storage menu, choose Folder , and the Folder screen appears. This screen allows you to create and configure folders on the 1U4500 volume. Folder Item Description Folder name Displays the name of the folder. Description Provides a description of the folder.
Add Folder Item Description RAID ID RAID volume where the new folder wil l reside. Folder Name Enter the name of the folder. Descrip tion Provid e a desc ription the fo lder. Browseable Enable or disable users from browsing the folder contents. If Yes is selected, then the share folder will be browseable.
NFS Share To allow NFS access to the share folder, enable the NFS Service , and then set up hosts with access rights by clicking Add . NFS Share Item Description Hostname Enter the name or IP address of the host Privilege Host has either read only or writeable access to the folder.
Folder Access Control List (ACL) On the Folder screen, press the ACL button, and the Access Control List screen appears. This screen allows you to configure access to the specific folder for users and groups. Select a user or a group from the left hand col umn and then choose Deny , Read Only , or Writable to confi gure their access level.
2. From the drop down select the group you would like to search for the user in. 3. Click Search . The system will list up to 1,000 users from the chosen category.
Click Start to begin the file sy stem check. Click Back to return to the previ ous screen. Click Reboot to reboot the system. When the file system c heck is run, the sys tem will show 20 l ines of information until it is complete. Once complete, the resu lts will be s hown at the bottom.
Network Management Use the Netwo rk menu to make network configuration settings as well as service support settings. WAN Configuration From the Netwo rk menu, choose WAN , and the WAN Configuration scree n appears. This screen displays the network parameters of the WAN connection.
Most Fast Ethernet (10/100) Switches/Routers do not support Jumbo Frame and you will not be able to connect to your 1U4500 after Jumbo Frame is turned on. If this happens, turn off the 1U4500. Then, power on the 1U4500 and immediately press and hold the Reset button on the back of the unit for 10 seconds.
WLAN Configuration When a compatible wireless USB don gle is installed on the 1U 4500, the 1U4500 will become an access point, and the Network dropdown menu will contain a WLA N menu item. From the Network menu, choose WLAN , and the WLAN Con figuration screen appears.
The IP Segment of WLA N, WAN and LA N should not overlap . NOTE NOTE Users should obey the international RF regulatory rules as they s et up the wireless RF channel on the 1U4500. The RF ope rating channels for different regions have been specified as fo llowing.
Apple Network Configuration Item Description AFP Server Enable or disable Apple File Service to use the 1U4500 with MAC OS-based systems. Zone Specifies Zo ne for Applet T alk service . If your AppleTalk network uses extended networks and is assigned with multiple zones, assign a zone name to the 1U4500.
Local User Configuration Item Description Add Press the Add button to add a user to the list of local users. Modify Press the Modify button to modify a local user. Delete Press the Delete button to delete a selected user from the system. Adding Users 1.
Modifying Users 1. Select an existing user from the Local User Configuration screen. 2. Click on the Modify bu tton, and Local User Setting screen appears. 3. From here, you can enter a new password a nd re-enter to confirm, or use the << or >> buttons to have this u ser join or leave a group.
5. Select users to be in thi s group from the Users List by adding them to the Members List using the << button. 6. Click the Apply button to save your changes. Modifying Groups 1. On the Local Group Configuration screen, select a group name from the list.
ADS/NT Configuration If you have a Windows Active Directory Server (ADS) or Windows NT server to handle th e domain security in your net work, you can simply enable the ADS/NT support feature; the 1U4500 will connect with the ADS/NT server and get all the inform ation of the domain users and groups automatically.
AD Domain Example Item Information Work Group / Domain Name domain ADS Support Enable ADS Server Name Computer1 ADS/NT Realm Domain.local Administrator ID Administrator Administrator Password *********** Confirm Password *********** • The Administrator Password field is for the passw ord of ADS (Active Directory Server) not 1U4500.
System Settings The System menu give s you a wealth of set tings that you ca n use to configure your 1U4500’s system administration f unctions. You ca n set up sys tem notifications, view s ystem logs, and even upgrade firmware from this menu.
System Logs Item Description Trunc ate All Log F ile Clear a ll log f iles. |<< < > >>| Use the forward ( > >>| ) and backward ( |<< < ) buttons to browse the log pages. INFO Provides all log in format ion inc luding w arning message s and error messages.
System Configuration Backup and Restore From the System menu, choose the Config Mgmt item and the Sys tem Configuration Download /Upload screen appears. From here, you can download or upl oad stored system configurations. See the following table for a detailed description of each item.
Upgrading System Firmware From the System menu, choose the Firmware Upgrade item and the Firmware Upgrade screen appears. Follow the steps below to upgrade your firmware: 1. Use the Browse button to find the firmware file. 2. Press Apply . 3. The beeper beeps and the Busy LED blinks until th e upgrade is complete.
Reboot and Shutdown System From the System menu, choose Reboot & Shutdown item, and the Shutdown/Reboot Sy stem screen appears. Press Reboot to restart the system or Shutdown to turn the syst em off. Logout To logout of the Web Admi nistration Interface, navi gate to System > Logout .
Chapter 5: Additional Feature Setup Overview The 1U4500 can also act as an FTP Serv er, allowing employees and clients to transfer files u sing their favorit e FTP programs. The in tegrated Print Server allows you to share a single USB printer will all users on the netw ork.
Printer Server You can configure the 1U4500 to act as a printer server. That way, all PCs connected to the network can uti lize the same printer. Windows XP SP2 To set up the Printer Server in Wi ndows XP SP2, follow the steps below : 1.
Windows Vista To set up the Printer Server in Win dows Vista, follow th e steps below: 1. Open Printer Folder from the Control Panel . 2. Click the right mouse b utton in anywhere on t he Printers folder and then select Add Printer . 3. Select Add a network, wireless o r Bluetooth printer .
4. Select The printer that I want isn’t listed . You can press Th e printer that I want isn’t listed to go into nex t page without waiti ng for Searching for available printers to fi nish.
If your printer model is not list ed, please contact your print er manufacturer for help. 7. Windows will attempt t o connect to th e printer. 8. You can choose to set this printer as the defaul t printer by checking the Set as the default printer box.
Chapter 6: Using the 1U4500 Overview Once the 1U4500 is setup and operating, users on the network may manage all varieties of digital music, photos, or files by simply using their web br owsers. To manage your personal files or access pub lic files on the 1U4500, just enter its IP address into your browser (default IP address is http://192.
62 7. To upload a fil e from your computer to the current fol der, press the New file (upload) button. When the scree n appears, press Browse and locate the file to upload. P ress OK and the file is uploaded t o the current folder. 8. To delete a file or folde r, select t he file or folder’ s check box.
4. When MAC OS X has co nnected to the 1U4500 successfully, an icon representing the f older will appear on th e MAC OS X desktop. You can access the folder by double clickin g on the icon. Mapping the 1U4500 as an iSCSI Drive With the 1U4500, you are able to map it as a n iSCSI drive.
4. Leave the default selection s and click Next . 5. Read the license agreement. To continue with the installation, click I Agree and then click Next . 6. The iSCSI Init iator will now in stall automat ically. Click Finish once completed. 7. Start the iSCSI Init iator by double-click ing its icon on the desktop.
8. Select the Discovery tab. Under Target Po rtal s , click Add . 9. Enter the IP address of the 1U4500 . Click OK . 10. On the iSCSI Initiator Properties window, s elect the Targets tab. With the iSCSI target highlighted, click Log On . The Log On to Target dialogue will appear.
11. If you have not enabled CHAP, click OK to continue. If you have enable d CHAP, click Advanced . Under Advanced Settings, check the CHAP lo gin inf ormat ion checkbox and enter your username and password. Click OK . 12. Right click My Computer on the desktop and select Manage .
13. Click on Disk Management and you will see a new hard disk listed. 14. Initialize t he new hard disk and you will th en be able to use the iSCSI target as a local drive. Windows Vista Because Windows Vista has th e Microsoft iSCSI Initiator pre- installed, you will not have to install th is piece of software.
also deleted. Adding an Nsync Task From the Nsync Inform atio n screen, click Add to display the Add Nsync Task screen. Add Nsync Task Item Description Task Name The name of your Nsync t ask. Manufacturer Select whether the target is a Thecus Product (e.
Designating 1U4500 as an Nsync Target The 1U4500 can act as an Nsync se rver, enabling another Nsync-equi pped Thecus NAS at a remote location backup their files to this 1U4500 . From the Network menu, choose the Nsync Target item, and the Nsync Target Ser ver Setting screen appears.
70 Windows XP Data Backup If you use Windows XP Prof essional, you can also use the Window s Backup Utility (Ntbackup.exe) to backup your files. If you use Windows XP Home Ed ition, follow th ese steps to install th e utility: 1. Insert the Windows XP CD into a drive and dou ble-click the CD icon in My Computer .
Chapter 7: T ip s and T ricks USB and eSATA Storage Expansion The 1U4500 supports external USB hard di sks through its three USB ports. Once a USB hard disk has successfully mounted , the entire volume will be copied automatically to the default USB HDD folder.
Remote Administration You can set up your 1U 4500 for remo te administration . With remote administration, you can access your 1U 4500 over the Inte rnet, even if your 1U4500 is behind a router. This is especi ally useful if you are traveling and suddenly need a file from your 1U4500.
73 b. You should see the login page of 1U4500. Firewall Software Configuration If you are using a software firewall (i .e. Norton Internet Secu rity) and are having trouble connecting to the 1U4500, you can try the following steps: 1. Double click th e NIS icon on system tray, and the n configure the Personal Firewall .
74 Chapter 8: T roubleshooting Forgot My Password If you forget your pass word, you can re set the unit to use the default password. To do this, press the reset bu tton on the front panel after system i s booted, and 1U4500 will be reset. WAN IP address will become 192.
Restoring Factory Defaults From the System menu, choose the Factory Default item and the R ese t to Factory De fault screen appears. Press A pply to reset the 1U4500 to factory default settings. WARNING Resetting to factory defaults will not erase the data disks, but WILL revert all the s ettings to the factor stored in the hard y default values.
76 Appendix A: Product S pecifications Hardware Specifications Product Model 1U4500R 1U4500S Core Processors / Memory Processor Intel® Celeron™ M 1.5GHz Memory 512MB standard Network Interfaces LAN 1 Gigabit RJ-45 connector LAN 2 Gigabit RJ-45 connector Storage HDD Bays 4 x 3.
77 Software Specifications Network File Protocols Micr osoft Networks (CIFS/SMB) Apple Filing Prot ocol (AFP 3.1) Network File System (NFS v3) File Transfer Protocol (FTP) Hyper Text Transfer Protocol.
78 Printer Server USB Printer (IPP support) Supported USB Devices USB Printer External HDD/flash disk USB IEEE 802.11 b/g dongle w/AP mode support** Setup Utility Windows 20 00/XP/2003 MAC OS X *PDC/AD support: Works as a client member in a Microsoft NT 4.
Appendix B: Customer Support If your 1U4500 is not working pro perly, we encourage you to check out Chapter 8: Troubleshooting , lo cated in this manual. You can also try to ensure that you are using the latest firmware version fo r your 1U4500. Thecus is com mitted to providing free firmware upgrades to our customers.
80 Appendix C: RAID Basics Overview A Redundant Array of Independent Disks (RAID) is a n array of several hard di sks that provide data security and high perf ormance. A RAI D system accesses several hard disks simultaneously, which improves I/O performance over a single h ard disk.
81 RAID 1 RAID 1 mirrors all data from one hard di sk drive to a second one hard disk drive, thus providing complete data redundancy . However, the cost of data storage capacity is doubled.
Disk Usage When all 5 disks are of the same size , and used in RAID, 1U4500 disk usa ge percentage is listed below: RAID Level Percentage Used RAID 0 100% RAID 1 20% RAID 5 80% RAID 6 60% RAID 10 50% JBOD 100% NOTE RAID 10 allows only 4 disks and one as spare disk.
83 Appendix D: Active Directory Basics Overview With Windows 2000, Microsoft intro duced Ac tive Directory (ADS), which is a large database/information store. Prior to Active Directory the Wi ndows OS could not store additional information in its domain database.
84 Appendix E: UPS Comp atibility List Brand Series Model Notes Ablerex MS-RT ActivePower 1400VA AEC MiniGuard UPS 700 M2501 cable Back-UPS Pro Matrix-UPS Smart-UPS Back-UPS 940-0095A/C cables, 940-00.
85 Brand Series Model Notes PowerRite MAX Fiskars PowerServer 10, 30 All models with alarm interface MP110/210 MS-T MS Gamatronic µPS3/1 Gemini UPS625/UPS1000 R3000 XR HP R5500 XR INELT Monolith 1000LT Infosec iPEL 350, 500, 750, 1000 Ippon (various) Liebert UPStation GXT2 contact-closure cable Masterguard (various) HF Line 1.
Brand Series Model Notes TrustTrust 425/625 BNT-1000AP Advice Partner/King Pr750 Powercom BNT-2000AP PowerGuard PG-600 PowerKinetics 9001 PowerTech Comp1000 DTR cable power Power Walker Line-Interacti.
87 Appendix F: Licensing Information Overview This product included copyrighted third- party software licensed under the terms of GNU General Public License. Please see THE GNU General Public License for extra terms and conditions of this license. Source Code Availability Thecus Technology Corp.
88 CGIC License Terms Basic License CGIC, copyright 1996, 1997, 1998, 1999, 200 0, 2001, 2002, 2003, 2004 by Thomas Boutell and Boutell.Com, Inc. Permission is grant ed to use CGIC in any application, commercial or noncommercial, at no cost.
89 Also, for each author's protection and our s, we want to ma ke certain that everyone understands that there is no warran ty for this free software .
90 c) If the modified program normally re ads commands interactively when run, you must cause i t, when started runni ng for such interacti ve use in the most ordinary way, to p rint or display an ann.
91 operating system on which the executable runs, unle ss that compo nent itself accompanies the executable. If distribution of executable or object co de is made by offering access to copy from a des.
92 This section is inten ded to make thoroughly clear w hat is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restri cted in certain coun.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Thecus 4500R è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Thecus 4500R - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Thecus 4500R imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Thecus 4500R ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Thecus 4500R, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Thecus 4500R.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Thecus 4500R. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Thecus 4500R insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
