Manuale d’uso / di manutenzione del prodotto ST 6002 S del fabbricante TechniSat
Vai alla pagina of 46
STAND BY TechniSat ST 6002 S TechniSat ST 6002 S TechniSat ST 6002 S 123 4 5 6 7 8 9 0 ENTER CNCL VIDEO AUDIO SKEW MUTE MENU TechniSat ST 6002 S ST 6002 S OPERA TING INSTRUCTIONS Satellite Receiver T .
TechniSat ST 6002 S 2 Contents Seite 2 Diagram : Front Panel, Remote Control Back Panel 3 3 Important Safety Instructions 6 4 Main Features of the ST 6002 S 7 5 Breif Introduction 8 5.1 Installation 8 5.1.1 Connection of the outside unit and television8 5.
STAND BY 123 4 56 7 8 9 0 ENTER CNCL VIDEO AUDIO SKEW MUTE MENU TechniSat ST 6002 S 2 Diagram: Fr ont Panel, Remote Contr ol, Back Panel Standby LED 4-Fig.
RF IN CH UHF OUT + - LNB PWR OUT DC 14/18V 400 mA MAX ( ( I B/G TSG VIDEO ANT IN B(R)-AUDIO-(L)A DECODER VIDEO EURO SCART FOR VCR/DECODER EURO SCART FOR TV GND PULSE +5V M2 M1 50 mA MAX 36V 1,5 A MAX .
3. Safety Instructions In the interest of safety , please read and observe the following instructions before using your new ST 6002 S. This sheet and the following pages concerning installation and operation should be retained for future reference. Installation: The procedures described in this manual should be followed carefully .
TechniSat ST 6002 S 7 4 Featur es of the ST 6002 S: The ST 6002 S has the following features: – 200 preprogrammed channel places – OSD (On-Screen-Display) – Infra-red remote control for all func.
TechniSat ST 6002 S 5 Brief Intr oduction W e have condensed the most important steps for the installation and use of the ST 6002 S. More detailed information can be found in chapters 6 - 10 of this manual. It is essential that a high quality outside unit with T riple-Band-LNB is used.
TechniSat ST 6002 S Function Button R TV Picture Display on the receiver FB Basic Programming R no satellite F 001 F press simultaneously Basic Programming F 001 ENTER 3 x F System Menu F 001 Setting .
TechniSat ST 6002 S If a satelite cannot be found: Sat programming CNCL F System-Menu F 113 (Bsp.) F Sat programming F 113 ENTER F Sat 27,5w Intel 601 CH 01 (Example) F Position 5204 (Eg.) CH 01 hold until a satellite F Position 5402 (Eg.) CH 01 is received F Position CH 01 F Position 5402 (Eg.
TechniSat ST 6002 S 6. INST ALLA TION 6.1. Installation of Outside Unit 6.1.1. General The following instructions assume that the system has been installed correctly so that all the satel- lites can be received. A TTENTION: The ST 6002 S has been pro - grammed for use with a T riple-Band-LNB.
Switch on the receiver using the mains power switch (on the appliance). The following menu appears on the TV screen: T o go to the System Menu switch the receiver into stand-by mode using the remote control unit ( ) . Now hold down the buttons on the front of the receiver simultaneously for a few seconds.
6.1.2 Basic Programming / Initial Set Up Initially to program the receiver you have to carry out a Master Reset. Therefore, move the cursor to the option "Master Reset" on the System Menu and press ENTER. After the first press a red warning screen appears.
TechniSat ST 6002 S 6.1.3 Setting the East/West Limits Choose the option "Set Dish Limit" and press ENTER. Then move the cursor to "Position 5000". First move the dish west by pressing > on either RCU or on front panel until the desired west limit is obtained.
TechniSat ST 6002 S 15 ENTER 2x 6.1.4 Programming of Satellite Positions Choose the option "Program Satellite " from the System Menu and press ENTER to display a table of parameters. Move cursor to "Sat" and use the keys to select the desi- red satellite i.
TechniSat ST 6002 S Return the cursor to "Sat" and use the buttons to select the satellite which you wish to store next. Repeat the same procedure as described above. All satellites can be stored by this method. NOTE: Not all satellite channels are transmitting continuous- ly .
Automatic Location of Satellites 1. Choose the option “Auto location” on the System Menu. The use of this function requires that ASTRA has already been stored and that a T echniSat actuator is connected to the St 6002 S. Note only satellites with a comparatively strong signal can be stored by this method.
TechniSat ST 6002 S 3. Repeat the same procedure for Eutelsat 13,10 E, and then for satellites further west of ASTRA. If you do not find a satel- lite using this method, program it manually as described befo- re. 4. After you have stored all satellites west of ASTRA, program those which are further east of ASTRA.
6.1.6. External Programming It is possible to transfer data between two ST 6002 S or bet- ween a personal computer and the ST 6002 S. T o do this you require a cable with two RS 232 connectors. If you wish to exchange data with a personal computer you require in addi- tion the appropriate software (disc).
TechniSat ST 6002 S 6.1.7 System Options Move the cursor to the menu option "Change System Options" and press the ENTER button. Choose the appropriate LNB by pressing the buttons on the RCU .
TechniSat ST 6002 S Frequency shift It is possible to tune in the receiver to the frequency of the LNB should it not be supplying the exact IF-frequency: 1.
TechniSat ST 6002 S 6.2. Connecting a Videorecorder or Decoder Connection of a Videorecorder T o record the signal of the ST 6002 S you can connect the videorecorder either to the “VCR/Dec” scart socket or to the UHF output. It is also possible to use the video/audio phono sockets.
TechniSat ST 6002 S 23 6.3 Menu Overview: System Menu CNCL ENTER CNCL ENTER CNCL ENTER CNCL ENTER CNCL ENTER CNCL ENTER CNCL ENTER CNCL ENTER CNCL ENTER CNCL ENTER CNCL ENTER CNCL ENTER CNCL ENTER CNC.
TechniSat ST 6002 S 7. Operation 7.1. General The receiver ST 6002 S has many functions. For ease of use and so that it is not necessary to use a dif ferent button for each function the receiver uses "On Screen Display" and function keys. In this way related functions are condensed into "Menus".
TechniSat ST 6002 S 7.2. Direct Operation Y ou can select the desired channel via the Key Pad. Simply select the channel number (see the pro- gram tables). The channel number will appear on the receiver display and also on the screen. When you choose a 3-fig.
TechniSat ST 6002 S 7.3. Menu Operation 7.3.1. Channel Selection Move the cursor to “Channel selection” and press ENTER. Use the keys to move the cursor to the desired channel and press ENTER. Stored channels are marked with a quaver . It is also possible to enter the channel no.
TechniSat ST 6002 S 7.3.2. Satellite Selection Choose the option “Satellite selection” from the menu and press ENTER. A list of all the satellites will appear , those which are stored being marked with a quaver . Move the cursor to the desired satellite and press ENTER.
TechniSat ST 6002 S 7.3.3 . Setting the Timer 1. Move the cursor to “Program timer events” and then press ENTER. Select Event 1 and press ENTER. 2. Use the buttons to move the cursor to “Channel” and with the buttons select the required channel.
TechniSat ST 6002 S 7.3.4. Setting the Clock Move the cursor to “Internal clock adjustment” and then press ENTER. Use the position keys to move the cursor to the appro- priate line and keep pressing the keys until the required data appears. Then press ENTER to start the clock.
TechniSat ST 6002 S 7.3.5. Alignment Dish Position a) If you wish to shift all satellite positions, eg. after a storm has influenced the dish position, first choose a satellite with a less powerful signal. Then move the dish using the but- tons until you receive an optimum picture.
8. Pr ogramming 8.1. General All channels that are known at this time have been stored in the ST 6002 S. However , as new satel- lites and channels frequently can appear , it is possible for you to receive and store these yourself. T o do this you need to obtain the appropriate publication that reports on all such developments.
TechniSat ST 6002 S 8.2 Channel Data Changing the channel sequence Y ou can use this function to put the channels in the order which you prefer . T o transfer the present channel move the cursor to “Channel data” and press ENTER. Now select the option “Copy channel data” and enter the channel number you wish to move the channel to.
TechniSat ST 6002 S 8.3 Expanding the Programmable Range of a Satellite Only a certain number of channels are available to each satel- lite unless you choose to extend them eg.
TechniSat ST 6002 S 8.4 Programming The Channels of new Satellites 1. First program the new satellites as described in the section on "Programming of Future Satellites". 2. Select an already stored channel whose parameters are similar to the ones of the new channel.
TechniSat ST 6002 S 8.5 Changing the Channel Name Select the channel whose name you wish to alter . Once again select "Channel data" followed this time by "Change Channel Name". Y ou can alter the name of the channel using the buttons to select both characters and numbers.
TechniSat ST 6002 S 36 ENTER.
TechniSat ST 6002 S 8.6 Changing Channel Parameters 8.6.1. Video Menu: T o change the present video parameters first press the VIDEO button on the RCU.
TechniSat ST 6002 S 8.6.2 Audio Menu T o call up this menu press the AUDIO button. The following parameters can be changed: "B/W" - The audio bandwidth can be switched between 150, 280 or 350 MHz. "De-Emph" - Y ou can choose between 50us, J17 and W egener .
TechniSat ST 6002 S 8.6.3 Skew Menu "Skew" - If you wish to fine tune the polarity , you can alter the current of the polariser from -45 mA to +45 mA until you receive a picture of optimum quality . The display of the signal strength may also help you.
TechniSat ST 6002 S 40 CNCL ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER MENU VIDEO AUDIO SKEW 8.7 Menu Overview: Main Menu.
TechniSat ST 6002 S Channel Programming: Ch.Nr. Programme ZF MHz A B MODE Audio ZF Demph. V-Pgl Dec-VIDEO Dec. MODUS Polar Satellite LNB-Sp. 1 PRO 7 1.406 7,02 7,20 STEREO 150 Panda/Weg. 1 NO D-4 Ver ASTRA 11 Ghz 14V 2 RTL 1.229 6,50 7,02 MONO 280 50 µs 1 NO D-4 Ver ASTRA 11 Ghz 14V 3 SAT.
TechniSat ST 6002 S Ch.Nr. Programme ZF MHz A B MODE Audio ZF Demph. V-Pgl Dec-VIDEO Dec. MODUS Polar Satellit LNB-Sp. 51 POWER FM 1.421 7,38 7,56 STEREO 150 Panda/Weg. 1 NO D-4 Hor ASTRA 11 Ghz 14V 52 1.332 7,38 7,56 STEREO 150 Panda/Weg. 1 NO D-4 Hor ASTRA 11 Ghz 14V 53 RADIO LUX.
TechniSat ST 6002 S K.Nr. Programm ZF MHz A B MODE Audio ZF Demph. V-Pgl Dec-VIDEO Dec. MODUS Polar Satellit LNB-Sp. 106 RTP Internac. 1.575 6,60 7,02 MONO 280 50µ s 3 NO D-4 Ver Eutelsat II-F3 11 GHz 14V 107 TV 7 (Tunesienne) 1.659 6,60 7,02 MONO 280 50µ s 3 NO D-4 Ver Eutelsat II-F3 11 GHz 14V 108 Business-TV 1.
TechniSat ST 6002 S K.Nr. Programm ZF MHz A B MODE Audio ZF Demph. V-Pgl Dec-VIDEO Dec. MODUS Polar Satellit LNB-Sp. 161 Cine Cinetti 1.880 5,80 6,40 MONO 280 J17 3 NO D-4 Hor. Telecom 2A 12 GHz 18V 162 Canal Plus 1.772 5,80 6,40 MONO 280 J17 3 NO D-4 Ver.
TechniSat ST 6002 S T uner Input frequency : 950-2050 MHz Input impedance: 75 Ohm Input level: -60dBm to -30dBm Input Connector : F-T ype LNB Power: +18/+14V DC 400mA max.
TechniSat ST 6002 S 46 Audio Frequency Range: 5.0 bis/to 8.8 MHz adjustable Mode: Mono/Stereo selectable Bandwidth: 150/ 280/ 350 kHz switchable Deemphase: 50µS/ J17/ Panda Wegener kompatibel Frequnc.
® TechniSat ist ein eingetragenes Warenzeichen der TechniSat Satellitenfernsehprodukte GmbH, TechnicPark, W-5568 Daun.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il TechniSat ST 6002 S è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del TechniSat ST 6002 S - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso TechniSat ST 6002 S imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul TechniSat ST 6002 S ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il TechniSat ST 6002 S, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del TechniSat ST 6002 S.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il TechniSat ST 6002 S. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo TechniSat ST 6002 S insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
