Manuale d’uso / di manutenzione del prodotto LCD40-920 del fabbricante Technika
Vai alla pagina of 35
COLOUR TELEVISION WITH REMOTE CONTROL OPERA TING INSTRUCTIONS For assistance, please call our T esco Electrical Helpline on 0845 4566767 LCD40-920.
English - 1 - Contents Features ................................................................. 2 Accessories ............................................................ 2 Introduction ............................................................. 2 Preparation .
English - 2 - Features • Remote controlled colour LCD TV . • Fully integrated digital TV (DVB-T). • HDMI connectors for digital video and audio. This connection is also designed to accept high de fi nition signals. • 200 programmes from VHF , UHF(analogue).
English - 3 - Safety Precautions Please read the following recommended safety precautions carefully for your safety . Power Source The TV set should be operated only from a 220-240 V AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience.
English - 4 - Headphone V olume Excessive sound pressure from earphones and headphones can cause hearing loss. Installation T o prevent injury , this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available).
English - 5 - Overview of the Remote Control SUBTITLE SLEEP F I NO / PE S T RE R ETU RN V P 1 4 7 2 5 8 3 6 9 JKL STU DEF MNO VWX PQR YZ M OK GHI S O U R C E ABC EPG 0 SCREEN LANG FAV TV DTV S AP W Standby 1. Y ellow / Feature menu / Current language 2.
English - 6 - LCD TV and Operating Buttons Standby button 1. TV/A V button 2. Programme Up/Down buttons 3. V olume Up/Down buttons 4. Note: Press “ ” / “ ” buttons at the same time to view main menu. Viewing the Connections- Back Connectors 12 1.
English - 7 - 5. SCART 1 inputs or outputs for external devices. Connect the SCART cable between SCART sockets on TV and SCART socket on your external device (such as a decoder , a VCR or a DVD player). Note : If an external device is connected via the SCART sockets, the TV will automatically switch to A V mode.
English - 8 - Viewing the Connections - Side Connectors CI Slot is used for inserting a CI card. A CI card allows you to 1. view all the channels that you subscribe to. For more information, see “Conditional Access” section. Headphone jack is used for connecting an external headphone to 2.
English - 9 - Power Connection IMPORT ANT : The TV set is designed to operate on 220-240V AC, 50 Hz. • After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. • Plug the power cable to the mains socket outlet.
English - 10 - Using Other Connectors Y ou can connect a range of optional equipment to your LCD TV . Possible connections are shown below . Note that cables shown in the illustration are not supplied. • T o connect external speakers, use an audio cable.
English - 1 1 - Input Selection Once you have connected external systems to your TV , you can switch to different input sources. • Press “ SOURCE ” button on your remote control for directly changing sources. or , • Select “ Source ” option from the main menu by using “ ” or “ ” button.
English - 12 - If an active antenna is connected to your TV , you can select this option as On. Antenna power should be “Off” when standard antenna is used instead of the active antenna. See Con fi guration Menu in the following sections for more information.
English - 13 - • Press EPG button to view the EPG menu. • Electronic Programme Guide appears on the screen. It is able to get Information of the channel - programs weekly by means of 7-DA Y -EPG. All programs of channels are displayed. On the bottom of the screen; info bar , showing all the available commands, will be displayed.
English - 14 - IDTV Menu System The IDTV menu can only be viewed when watching digital terrestrial broadcasting. Press the “ ” button to turn IDTV on while the TV is in analogue mode.
English - 15 - Renaming Channels T o rename a speci fi c channel, the channel must be highlighted by pressing “ ” or “ ” button. Then highlight the Edit Name item by pressing “ ” or “ ” button as illustrated below . Press the OK button to activate the rename feature.
English - 16 - on the remote control. Then “Add Timer” window appears. Channel : “ ” or “ ” keys will navigate the user through the TV or Radio list. Date : Starting date is entered via the Left/Right or the numeric buttons. Start : Starting time is entered via the Left/Right or the numeric buttons.
English - 17 - Dolby D Digital (* for EU countries only) (optional) In the Con fi guration Menu, highlight the Dolby D item by pressing “ ” or “ ” buttons. Use the “ ” or “ ” buttons to set the Dolby D Digital as On or Off. If the channel that you are watching supports Dolby Digital,you can turn this setting on.
English - 18 - Parental Control Use “ ” or “ ” buttons to go to Parental Lock option. Press OK button to enter the menu. A dialog box asking for the lock key will be displayed. The key is set to “0000” initially . Enter PIN. If it is incorrect, “Wrong Pin” OSD will be displayed.
English - 19 - Menu : shows the language of the system Preferred These settings will be used if available. Otherwise the current settings will be used. • Audio : by pressing “ ” or “ ” keys change the audio language. • Subtitle : alter the subtitle language with “ ” or “ ” keys.
English - 20 - Select your Country , Language and T ext language by using “ ” or “ ” and “ ” or “ ” buttons. Press OK or RED button to continue. T o cancel, press BLUE button. The following menu will be displayed during the automatic tuning: After APS is fi nalized, the programme table will appear on the screen.
English - 21 - Analogue TV Menu System Picture Menu Mode For your viewing requirements, you can set the related mode option. Press “ ” or “ ” button to select Mode . Press “ ” or “ ” button to choose from one of these options: Cinema , Dynamic and Natural .
English - 22 - V olume Press “ ” or “ ” button to select V olume . Press “ ” or “ ” button to change the level of the V olume. Equalizer Press “ ” or “ ” button to select Equalizer . Press “ ” button to view equalizer menu.
English - 23 - Using “ ” or “ ” button, you can switch to PIP , P AP mode or turn off the feature. If the TV is switched to PIP or P AP mode, Pip-Pap submenu will change accordingly and the following settings will appear on the same menu screen.
English - 24 - Press “ ” or “ ” button to select Menu Timeout . Use “ ” or “ ” button to change menu timeout to 15 sec , 30 sec or 60 sec .
English - 25 - Store Press “ ” or “ ” button to select Store Program . Press “ ” or OK button to store the settings. “ Stored... ” will be displayed on the screen. Program T able Select Program T able by pressing “ ” or “ ” button.
English - 26 - Source Menu Press “ ” or “ ” button and select the sixth icon. Then press “ ” or OK button. Source menu appears on the screen: In source menu, highlight a source by pressing “ ” or “ ” button and switch to that mode by pressing “ ” button.
English - 27 - Displaying TV Information Programme Number , Programme Name , Sound Indicator and Zoom Mode information is displayed on the screen when a new programme is entered or “ INFO/ ” button is pressed. Mute Function Press “ ” button to disable sound.
English - 28 - 14:9 This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen. Cinema This zooms up the wide picture (16:9 aspect ratio) to the full screen. Subtitle This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen.
English - 29 - Tips Screen Care Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. For your safety , unplug the mains plug when cleaning the set. When moving the TV , hold it properly from the bottom part.
English - 30 - Appendix A: PC Input T ypical Display Modes The display has a maximum resolution of 1920 x 1200 . The following table is an illustration of some of the typical video display modes. Y our TV may not support different resolutions. Supported resolution modes are listed below .
English - 31 - Appendix C: Supported DVI Resolutions When connecting devices to your TV’ s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information.
English - 32 - Speci fi cations TV BROADCASTING P AL/SECAM B/G D/K K’ I/I’ L/L ’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND Digital Reception MHEG-5 ENGINE compliant with ISO/IE.
English - 33 - Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply .
5016471 0.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Technika LCD40-920 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Technika LCD40-920 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Technika LCD40-920 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Technika LCD40-920 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Technika LCD40-920, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Technika LCD40-920.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Technika LCD40-920. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Technika LCD40-920 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
