Manuale d’uso / di manutenzione del prodotto MD-801RMKII del fabbricante Tascam
Vai alla pagina of 29
» M D-801 R @#/ M D-801 P @# MD Recorder/Pla y er O WNER’S MANU AL CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE.
Table of Contents TASCAM MD-801R/P Mk II –i 1 - Introduction 1.1 About the MiniDisc format ................ 1-1 1.1.1 ATRAC compression .......................... 1-1 1.1.2 Buffer memory .................................... 1-1 1.1.3 Random access and U-TOC .
Table of Contents –ii TASCAM MD-801R/P Mk II 4.2.1 Playing back a whole disc .................. 4-1 4.2.2 Playback outputs ................................ 4-1 4.2.3 Monaural playback .............................. 4-1 4.2.4 Playing back a single track .
TASCAM MD-801R/P Mk II 1–1 1 - Introduction This manual cov ers the two models of the MD-801 Mk II product line: the MD-801R Mk II, which is capable of recording and playing back on MiniDisc media, and the MD-801P Mk II, which is for play- back only of such media.
1 - Care of MD media 1–2 TASCAM MD-801R/P Mk II disk from the user , and a file appears as one contigu- ous block of data (e v en though it may be spread o v er many tracks and sectors of the disk), the MD player allo ws separated audio data to appear as a continuous audio track.
1 - About the MD-801R/P Mk II TASCAM MD-801R/P Mk II 1–3 to be con v eniently carried out using a standard k e y- board • Remote control possible from dedicated T ASCAM remote control units (RC-80.
1 - About this manual 1–4 TASCAM MD-801R/P Mk II 1.3.4 Backup memory When the unit is po wered down, the follo wing set- tings are memorized. • A UTO READ Y status (see [20] ) • A UTO CUE settin.
TASCAM MD-801R/P Mk II 3–1 3 - Menu items The selections that can be made using the MD-801’ s menu system af fect the operation of many other functions. W e suggest that you take the time to look through this section and familiarize yourself with the basic contents, so that you hav e an idea of some of the options av ailable to you.
3 - Resume setting 3–2 TASCAM MD-801R/P Mk II The minimum length for the jog loop is 12 frames, and the maximum v alue is 32 frames. The v alue is set in 1-frame steps.
3 - Incremental play TASCAM MD-801R/P Mk II 3–3 3.10 Incremental play This function allo ws auto-cueing of the playback point to the start of the next track when the ST OP key [5] is pressed, or a fader stop command is recei ved (on pin 8 of the parallel remote control port [47] ).
3 - Auto track numbering level 3–4 TASCAM MD-801R/P Mk II 3.12.1Spindle motor time Use this to check ho w many hours the spindle motor has been in operation. 3.12.2Laser pickup time This indicates ho w many hours the laser pickup has been used for recording.
TASCAM MD-801R/P Mk II 4–1 4 - Basic operations This section gi ves you informstion about the basic operations using the MD-801. It assumes that you hav e connected the MD-801 to all the other equipment that you will be using. If you hav e not already made these connections, read 2.
4 - Playback of discs 4–2 TASCAM MD-801R/P Mk II 4.2.4 Playing bac k a single track When the disc has been loaded and the T OC has been read, use the PLA Y MODE ke y to select the SINGLE play mode (see [22] ). Use the TRA CK ke ys [4] to mov e the playback posi- tion to the start of the desired track.
4 - Playback of discs TASCAM MD-801R/P Mk II 4–3 4.2.9 Repeat playbac k Use the REPEA T key [26] to enable the repeat mode as sho wn in the display ( REPEA T ). The three dif ferent repeat modes av ailable corre- spond to the three playback modes set with the PLA Y MODE key [22] (whole disc, SINGLE track or A-B points, as set abov e).
4 - Recording operations 4–4 TASCAM MD-801R/P Mk II NO TE The point at which the JOG ke y was pressed will not be included in the jog loop . T o include this point in the loop , you m ust tur n the JOG dial counterclockwise .
4 - Recording operations TASCAM MD-801R/P Mk II 4–5 MD-801R model only . 4.3.1 General notes on recording using the MD format Because the MD method of recording is some what dif ferent to a linear recording method, such as tape, you should note the follo wing points.
4 - Recording operations 4–6 TASCAM MD-801R/P Mk II 1 Select the recording method (digital or analog) and the appropriate input source. 2 Make sure the unit is stopped.
4 - Recording operations TASCAM MD-801R/P Mk II 4–7 2 Cue the playback point to the place that you want to start recording. 3 Press the READ Y ke y [7] to put the MD-801 into play ready mode. This step is the primary dif ference between replace recording and ordi- nary post-script recording.
4 - Recording operations 4–8 TASCAM MD-801R/P Mk II vious one. If the digital signal is not resumed within 30 seconds of interruption, recording will stop .
TASCAM MD-801R/P Mk II 5–1 5 - Editing operations Unlike tape or other linear media, the MD-801 pro- vides you with a wide range of editing tools, allo w- ing you to make arbitary cuts, “splices” and rearrangements of running order without having to re-record any parts of the material.
5 - Erasing a track 5–2 TASCAM MD-801R/P Mk II of the loop is the point at which you want to di vide the track. NO TE Y ou can set the length of the jog loop in the menu system (see 3.5, "Jog loop length"). 5 When the start of the jog loop is correctly posi- tioned, turn the SHUTTLE wheel clockwise.
5 - Moving tracks TASCAM MD-801R/P Mk II 5–3 The PLA Y indicator abov e the PLA Y ke y will flash, as will the EDIT indication in the display , to sho w that rehearsal mode has been entered.
5 - A and B point erase operations 5–4 TASCAM MD-801R/P Mk II of operation is the same, the function is so flexible that it can be used for many dif ferent purposes.
5 - Moving an A-B point TASCAM MD-801R/P Mk II 5–5 If the A point is set at the start of a track, and the B point at the end of another track, the whole of the tracks containing and between these points will be erased (in the example abo ve, tracks 2 and 3 will be erased.
5 - Restoring erased material 5–6 TASCAM MD-801R/P Mk II bers are renumbered accordingly . See the dia- gram abov e for an example. If you need to make the ne w track (formerly the A-B portion) into part of the preceding and/or follo wing track, use the track combine facility (see 5.
5 - Erasing a complete disc TASCAM MD-801R/P Mk II 5–7 3 T urn the SHUTTLE wheel clockwise. The dis- play changes: 4 T urn the SHUTTLE wheel clockwise once again to change the current track from mono to stereo or vice versa . The display will sho w Now Editing , follo wed by Complete .
5 - Track and disc title entry 5–8 TASCAM MD-801R/P Mk II tion will mov e the cursor more than one position. 7 Continue using the D ATA dial and SHUTTLE wheel to enter characters, until the title is complete. 8 T o store the title, press the EDIT ke y .
5 - Track and disc title entry TASCAM MD-801R/P Mk II 5–9 5.11.6Copying disc and trac k titles When two MD-801 units are connected together using the optional PW -1XMD serial cable, disc and track titles can be copied from one unit (master) to the other (slav e), as described in 4.
TEAC CORPORATION Phone: (0422) 52-5082 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan TEAC AMERICA, INC. Phone: (213) 726-0303 7733 Telegraph Road, Montebello, California 90640 TEAC CANADA LTD. Phone: 905-890-8008 Facsimile: 905-890-9888 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada TEAC MEXICO, S.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Tascam MD-801RMKII è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Tascam MD-801RMKII - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Tascam MD-801RMKII imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Tascam MD-801RMKII ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Tascam MD-801RMKII, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Tascam MD-801RMKII.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Tascam MD-801RMKII. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Tascam MD-801RMKII insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
