Manuale d’uso / di manutenzione del prodotto E5740 del fabbricante TANDBERG
Vai alla pagina of 332
ST.TM.E10076.3 Issue 3 ENGLISH (UK) INSTRUCTI ON MANUAL E5714/E574 0-xxx DSNG, E5715 /E5750 DENG Voyager Encoder Build Version 2.1. 0 to 3.1.0 ( and later) M2/VOY/E5714, M 2/VOY/E57 40-xxx, M2/VOY/E57.
Preliminary Pages Page ii Instructio n Manual: evo lutio n 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 Issue 3 first publ ished in 20 02 by: T ANDBERG T ELEVISION L TD R EGISTERE D A .
Preliminary Pages Instruc tion Manual: e v olution 5000 E57xx DSNG and DEN G Voy ag er Encoder Page iii ST.TM .E 10076. 3 List of Contents Chapter 1: Introduction to the Basic Enco der Gives a general descrip ti on of the eq uipment and its main features and functions.
Preliminary Pages Page iv Instruc tion Manual: e v olution 5000 E57xx DSN G and DEN G Voy a g er Enc o der ST.TM .E100 76. 3 About this Manua l Th is m anu a l pr ov id es ins tr uc t ion s a nd inf or mat io n fo r th e ins ta lla tio n, operation of the Encoder.
Preliminary Pages Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page v ST.TM .E 10076. 3 Ackno wledgements General All best endeavours have bee n made to acknowledge reg istered trademarks and trademarks used throughout this manua l.
Preliminary Pages Page vi Instruction Manual: ev o lution 5000 E57xx DSNG and DENG Voyag er Enco der ST.TM .E100 76. 3 Warnings, Cautions and N otes Heed Warnings Al l war n ing s o n t he pr od uc t an d in t he op er at ing in st ruc t ion s s ho uld be adhered to.
Preliminary Pages Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page vii ST.TM .E 10076. 3 Contact Information TANDBERG Television Custom er Servic es Support Servic.
Preliminary Pages Page viii Instru c tio n Manual: ev o lution 5000 E57x x DSNG and DENG Voya g er Encoder ST.TM .E100 76. 3 Technical Training Training Course s TANDBERG Televisi on provides a wide range of training courses on the operation and maintenance of our products and on their supporting technologies.
Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-1 ST.TM .E10076. 3 Chapter 1 1. Introduction to the Basic Encoder Contents 1.1 Scope of this Manual................................................. 1-3 1.1.1 Who Should Use This Manual .
Introd uc tio n to the Basic Enc o der Page 1-2 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 1U Chassis .................................................. 1-18 2U Chassis ............................
Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-3 ST.TM .E10076. 3 1.1 Scope of this Manual 1.
Introd uc tio n to the Basic Enc o der Page 1-4 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 There are vacant slots for option mo dules; one in the E5714 and E5715; three in the E5760; four in the E5740; five in the E5750.
Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-5 ST.TM .E10076. 3 Informat ion Label Th er e a re two inf or ma tio n lab els wh ich ide ntif y t he co nfig ur atio n o f t he unit.
Introd uc tio n to the Basic Enc o der Page 1-6 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 The E5714 and E5740 co ntain the same high performance en coder. The E5714 is a 1U cha ssis hou sing t he e nco der and a QPSK s ate llite mo dula tor.
Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-7 ST.TM .E10076. 3 E5714 Th e s ate llite mod ulat or w ithin the E5714 su pport s QPSK modula tion in accordance with EN 300 421 (DVB-S) .
Introd uc tio n to the Basic Enc o der Page 1-8 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 1.3 Summary of Features 1.
Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-9 ST.TM .E10076. 3 · Full y exhausti ve motion esti mation · An interna.
Introd uc tio n to the Basic Enc o der Page 1-10 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 1.
Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-1 1 ST.TM .E10076. 3 Audio Inputs The standard audio input i s: · AUDIO IN – 1 5- way male D- t ype - s o ftw ar e s ele ct ab le b alan ce d analogue or digital AES/EBU, with AES/EBU on left only.
Introd uc tio n to the Basic Enc o der Page 1-12 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Test Tones The equipment can be configured to generate a test to ne for al ignment purposes. Refer to Annex B, Technical Specification f or leve l an d frequency.
Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-1 3 ST.TM .E10076. 3 Table 1.
Introd uc tio n to the Basic Enc o der Page 1-14 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 VBI User Dat a Closed Caption data, together wi th other formats such as VITC and AFD, can be transmitted in the user data field of the video or relevant part of the video stream.
Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-1 5 ST.TM .E10076. 3 1.3.5 Outputs Three ASI-C (copper) outputs supplyi ng a DVB and ATSC 18 MPEG -2 transport stream are supplied as standard.
Introd uc tio n to the Basic Enc o der Page 1-16 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 1.4 Guided Tour 1.4.1 Enclosure There are two sizes of encl osure, 1U and 2U v ersi ons. The encl osure i s used as a stand-alone unit.
Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-1 7 ST.TM .E10076. 3 Power Supply Stand-by Switch The use of this switch puts the Encoder into stand-by mode . It powers down the supply rai l s of the displ ay and internal circui ts wi thin the uni t.
Introd uc tio n to the Basic Enc o der Page 1-18 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 1U Chassis Figure 1.10: E5714 (1U) Rear Panel Component Parts and Connectors Figure 1.11: E5715 (1U) Rear Panel Component Parts and Connectors 2U Chassis Figure 1.
Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-1 9 ST.TM .E10076. 3 Figure 1.13: E5750 (2U) Rear Panel Component Parts and Connectors 1.4.5 Boards in the Basic Encoder The basic Encoder contai ns two bo ards mounted hori zontall y i n the enclosure (see Ta b le 1.
Introd uc tio n to the Basic Enc o der Page 1-20 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 BLANK.
Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-1 ST.TM .E10076. 3 Chapter 2 2. Installing the Equipment Contents 2.1 Introduction ............................................................... 2-3 2.1.1 Read This First! .
Installing the Eq uip m e nt Page 2-2 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 IF Out 2 ...................................................... 2-21 2.7 Powering Up/Down ..........................
Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-3 ST.TM .E10076. 3 2.1 Introduction 2.1.1 Read This First! The Encoder must be handled carefull y and thoughtful ly to prevent safety hazards and damage.
Installing the Eq uip m e nt Page 2-4 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 FCC This equi pment has been tested and f ound to com p l y wi th the li mi t s for a Clas s A dig ita l de vice , p ur su ant to Pa rt 1 5 o f th e F CC Ru les .
Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-5 ST.TM .E10076. 3 Figure 2.1: Fitting the Encoder into a Rack 2.3.2 Cable Routing Power supply cables should be routed so that they are not likel y to be walked on or pi nched by i tems placed upon or agai nst them.
Installing the Eq uip m e nt Page 2-6 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 The unit is designed for stationary or fixed use only. Ensure it i s firmly and safely l ocated and has an adequate th rough-fl ow of ai r.
Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-7 ST.TM .E10076. 3 2.4 AC Mains Operating Voltage and Earthing 2.4.1 AC Power Supply CAUTION... This product should be operated only from the type of power source indicated on the marking label.
Installing the Eq uip m e nt Page 2-8 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 The unit has a Technical earth termi nal (marked wi th ) located at the re ar p an el. It s u se is r ec om me nde d.
Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-9 ST.TM .E10076. 3 The internal dc power supply module used in this equi pment i s desi gned for use on dc supplies ranging from 12 to 36 volts dc.
Installing the Eq uip m e nt Page 2-10 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 WARNING … THE POWER-SUPPLY CABL E SHOULD BE ROUTED SO THAT IT IS NOT LIKEL Y T O BE DAMAGED OR TRAPPED BY IT EMS PLACED UPON OR AG AINST IT, PAYI NG PARTICULAR ATTENTION TO T HE CABLE AT CONNECTION POINT S.
Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-1 1 ST.TM .E10076. 3 Figure 2.4: E5715 (1U) Rear Panel Component Parts and Connectors Figure 2.5: E5740-IF (2U) Rear Panel Component Parts and Connectors Figure 2.
Installing the Eq uip m e nt Page 2-12 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Figure 2.7: E5750 (2U) Rear Panel Component Parts and Connectors 2.
Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-1 3 ST.TM .E10076. 3 Do no t mo ve o r ins ta ll eq uip men t w hils t it is st ill at ta che d t o t he ma ins supply. Ensure ESD precauti ons are obs er ved wh ilst inte rc o nne ct ing equipment.
Installing the Eq uip m e nt Page 2-14 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 2.4: H SYNC Connector Pin Signal Centre Video Input Screen Ground Impedance 75 W COMP VIDEO A 75 W BNC connector pro vides a high qual ity analogue vi deo i nput to the unit.
Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-1 5 ST.TM .E10076. 3 Table 2.6: Audio In Connector Pin Signal Pin Signal Analogue D.
Installing the Eq uip m e nt Page 2-16 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Ethernet #1 and #2 An 8-way, RJ- 45 connect or provides a 10BaseT Ethernet interface for communi cati ons with the MEM for control and moni tori ng .
Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-1 7 ST.TM .E10076. 3 Remote Contr ol A 9-way, D-type male connector pro vides an RS-232/R S-485 port for re mote co ntrol of the Encoder (see Serial Protocol Option ).
Installing the Eq uip m e nt Page 2-18 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 NOTES… 1. Signal names are with respect to a DTE in accordance with the RS-232 specification. 2. Remote pin numbers only apply to a 9-way D-type connector.
Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-1 9 ST.TM .E10076. 3 2.6.10 Satellite Modulator IF Output (E5714 and E5740 IF) IF Out (Main) 75 W BNC socket provides an IF o utput. Table 2.
Installing the Eq uip m e nt Page 2-20 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 L-Band Out (Main) 50 W SMA female connector provides the main L-band output. This can also provide +24 V dc at up to 500 mA to power an up-converter.
Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-2 1 ST.TM .E10076. 3 IF Out 2 A 75 W BNC socket pro vides a 70 MHz IF output used fo r monitori ng.
Installing the Eq uip m e nt Page 2-22 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 2.8 Setting the Encoder IP Address 2.8.1 Methods of Changing the Encoder IP Address If, for any reason, the IP address has to be changed, this can be achieved via the front panel menus (see Section 4.
Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-1 ST.TM .E10076. 3 Chapter 3 3. Options and Upgrades Contents 3.1 What’s Available........................................................ 3-3 3.1.1 Option Functions.
Options and Upg r ad es Page 3-2 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 3.10 16QA M Demodulator (M2/EOM2/SATDEMOD) ...... 3-24 3.10.1 Overview ..................................................
Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-3 ST.TM .E10076. 3 3.1 What’s Available 3.1.1 Option Functions The basic Encoder functional it y can be enhanced wi th the incl usion of options, hardware and software.
Options and Upg r ad es Page 3-4 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 Table 3.2: Software Options Marketing Code Name Used in 1U Used in 2U M2/ESO2/NR Noise Reduction 44 M2/ESO2/PU Performance Upgrade/Bit-rate <1.
Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-5 ST.TM .E10076. 3 3.2 Bit-rate Limi ts Wi th Reflex Li cence and/or Performance Upgrade A user with a REFLEX l icence (M2/ES O2/VBR) but no Performance Upgrade (M 2/ ES O2 /PU ) w ill be ab le t o g et lowe r b it- ra te s t han 1.
Options and Upg r ad es Page 3-6 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 BISS scrambling (when fitted) is enabl ed and controll ed via the Setup/Mux Menu (see Chapter 4, Operating the Equi pment Locally, Section 4.
Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-7 ST.TM .E10076. 3 3.4.2 Assembly Rear Panel NOTE… The AES/EBU reference signal is provided for ba ckwards compatibility only. When using E57xx Encoders use the reference signal provided by the Base Board.
Options and Upg r ad es Page 3-8 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 Table 3.4: Audio In Connector Pin Signal Pin Signal Analogue Digital A.
Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-9 ST.TM .E10076. 3 3.5 RS-232 and RS-422 Data Input Opti on (M2/EOM2/DAT) 3.5.1 Overview NOTE… The Data Input Option does not report errors back to the host, thus no alarms are raised by the Encoder.
Options and Upg r ad es Page 3-10 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Async Connector A 9-way, D-type female connecto r provides an RS-232 async hronous, se rial communicati ons data i nput interface.
Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-1 1 ST.TM .E10076. 3 Table 3.6: RS-422 Data Connector (Option Module) - Synchronous Remo.
Options and Upg r ad es Page 3-12 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 3.6 Remux Option (M2/EOM2/REMUX) 3.6.1 Overview NOTE… The M2/EOM2/REMUX Remux Option Module is supported by Build version 2.
Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-1 3 ST.TM .E10076. 3 DVB ASI IN 1, 2 and 3 Connectors A 75 W BNC connector provides an in put to the uni t.
Options and Upg r ad es Page 3-14 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Figure 3.4: Block Diagram – One Stage of Remultiplexing Sim ilarly , i.
Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-1 5 ST.TM .E10076. 3 3.6.4 Function of Remultiplexer It is t he fun ct ion of th e R em .
Options and Upg r ad es Page 3-16 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 3.6.5 Using the Remultiplexer Set the output bit-rate to the required val ue i n the Setup/Mux Menu .
Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-1 7 ST.TM .E10076. 3 The easiest way to conf i gure the bi t-rates to avoi d ov erf l ow, i s as foll ows: 1.
Options and Upg r ad es Page 3-18 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 3.7 XLR Expander Card Option (M2/EOM2/XLR) 3.7.1 Overview NOTE… The M2/EOM2/XLR XLR Expander Card Option is supported by B uild version 3.
Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-1 9 ST.TM .E10076. 3 NOTES… 1. Pre-encoded signals cannot be reconstructed on the analogue outputs. 2. Pre-encoded signals will raise an alarm on the digital output.
Options and Upg r ad es Page 3-20 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 NOTES… 1. When the Encoder is powered down the digital channel is selected with 110 W termination. 2. The digital audio input does not support SPDIF.
Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-2 1 ST.TM .E10076. 3 3.8 SD Decoder Option (M2/EOM2/DEC) 3.8.1 Overview NOTES… 1. The M2/EOM2/DEC SD Decoder Option is supported by Build version 3.
Options and Upg r ad es Page 3-22 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Composite V i deo Output A 75 W female BNC connector pro vides a composite video outp ut. See Annex B, Technical Specification for a li st of supported vi deo standards.
Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-2 3 ST.TM .E10076. 3 RS-232/RS-422 Data Output A 9-way D-type socket provides the data outputs.
Options and Upg r ad es Page 3-24 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 3.9.2 Assembly Rear Panel W IF In A 75 W female BNC connector pro vides an IF Input.
Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-2 5 ST.TM .E10076. 3 3.10.2 Assembly Rear Panel L-Band Inputs Two 75 W F-type female connectors provid e L-band inpu ts .
Options and Upg r ad es Page 3-26 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Between one and seven MPEG-2 transp ort stream packets can be put i n ea ch UD P pa cke t. Th e d at a link lay er is E the rn et ac co rd ing t o IEEE 802.
Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-2 7 ST.TM .E10076. 3 ASI Out A 75 W female BNC connector provides an ASI output.
Options and Upg r ad es Page 3-28 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 3.12.3 M2/ESO2/VBR This purchasable option upgrades the Encoder to include vari able bi t-rate. Contact Customer Services for detail s.
Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-1 ST.TM .E10076. 3 Chapter 4 4. Operating the Equipment Locally Contents 4.1 Introduction ............................................................... 4-9 4.2 Establishing Local Control (1U).
Operating th e Equipment Locally Page 4-2 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 SNMP Master Option .................................. 4-25 Last SNMP Master Option .......................... 4-25 Last SNMP Poll Option .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-3 ST.TM .E10076. 3 Audio Delay Option ..................................... 4-57 External Delay Option ...........................
Operating th e Equipment Locally Page 4-4 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 Tx Bandwidth Option ................................... 4-81 Bit-rate (188) Option..............................
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-5 ST.TM .E10076. 3 Major Channel Option ............................... 4-101 Minor Channel Option ...............................
Operating th e Equipment Locally Page 4-6 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 4.17.12 Store Configs in Backup Option ................ 4-122 4.17.13 Factory 525 Defaults Option ..............
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-7 ST.TM .E10076. 3 Table 4.80: Carri ers Opti ons ....................................................... 4-75 Table 4.81: Other Frequency Opti ons .
Operating th e Equipment Locally Page 4-8 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 BLANK.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-9 ST.TM .E10076. 3 4.1 Introduction The front panel displ ay and keypad are used to configure, control and monitor the Encoder. The control i n terface i s a structured menu which gives access to the vari ous options.
Operating th e Equipment Locally Page 4-10 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Figure 4.2: 1U Navigation Keys and Buttons NOTE… The navigation keys are referred to as LEFT, RIGH T, UP and DOWN, indicating the direction of the arrows.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-1 1 ST.TM .E10076. 3 For Multiple Choice Entr y · DOWN Scroll s down to nex t .
Operating th e Equipment Locally Page 4-12 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 4.4 Establishing Local Control (2U) 4.4.1 Input Monitor At power-on the Encoder runs throug h a boot sequence (boot tim e wi th Re mux op tio n mo du le is ap pr oxim at ely 90 s ec on ds ).
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-1 3 ST.TM .E10076. 3 4.4.3 A(udio) / V(ideo) Me nu (2U) The A/V Menu contai ns some basic vi deo and audio opti ons. They can al l be changed with the exception of the audio input levels.
Operating th e Equipment Locally Page 4-14 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Figure 4.6: 2U Keypad and Display Functions 4.5.2 How to Use the Ke ypad Each key on the keypad has more than one i nscri pti on.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-1 5 ST.TM .E10076. 3 4.5.3 How to Use the Functions Associate d with Softkeys The foll owi ng displ ay screens show the di fferent functions associ ated with the options.
Operating th e Equipment Locally Page 4-16 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Config Menu Front Pa nel Diagnost ic s Menu LCD Displ ay Keyboa rd Fail Relay Alarm Rel ay Alarm LE D Buzze r Quit Setup Menu System.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-1 7 ST.TM .E10076. 3 4.5.6 Summary Screen and Advanced Menus See Figure 4.8 , for the top-l evel me nu hierarchy. Press the More softkey in th e Summary Screen to access the Advanced Menu .
Operating th e Equipment Locally Page 4-18 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 System Menu Service Info.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-1 9 ST.TM .E10076. 3 4.7.2 Service Info Menu (Syntax = ATSC 1 ) Overview The Service Info Menu is sel ected from the System Menu by pressing the Service Info so ftkey.
Operating th e Equipment Locally Page 4-20 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.3: SI Level Options Selected Option Descr iption PAT/PMT/CAT onl y Program As sociation Tabl e/ Program Map Table/ Conditi onal Access Table.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-2 1 ST.TM .E10076. 3 DST Start Date Option ( 3.0 and l ater) To access the DST Start Date (Dayli g ht Saving Time) opti on, press the DST Start Date softkey in the Service Info Menu .
Operating th e Equipment Locally Page 4-22 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.5: SI Level Options Selected Option Description PAT/PMT/CAT onl y Program Associati on Table/ Program Map Table/ Conditi onal Access T able.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-2 3 ST.TM .E10076. 3 Transport Stream Id Option To access the Transport Stre am Id opti on, press the Transport Stream Id softkey in the Service Info Menu .
Operating th e Equipment Locally Page 4-24 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.10: Audio AC-3 Descriptor Options Selected Option Descr iption DVB & ATSC Both the ATSC and DVB descriptors are used with the audio streams .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-2 5 ST.TM .E10076. 3 SNMP Master Option To access the SNMP Mast er opti on, press the SNMP Master softkey in the Remote Control Menu .
Operating th e Equipment Locally Page 4-26 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.13: SABus Baud Rate Options Selected Option Description Selected Option Description 1200 1200 Baud rate. 9600 9600 Baud rate.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-2 7 ST.TM .E10076. 3 UTC Offset Option Th e U nive rs al T ime Co -o rd ina te (U TC ) is effectiv el y the same as Gr eenw i ch Mean Time (GMT) .
Operating th e Equipment Locally Page 4-28 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Power Dip Recovery Option To access the Power Dip Recovery opti on, press the Po wer D i p Recovery softkey in the General Menu .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-2 9 ST.TM .E10076. 3 4.7.6 Advanced Menu Overview The Advanced Menu is sel ected from the System Menu by pressing the Advanced softkey.
Operating th e Equipment Locally Page 4-30 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Action On PID Error Option To access the Action on PID Error opti on, press the Action on PID Error softkey in the Advanced Menu .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-3 1 ST.TM .E10076. 3 CAUTION… The Reset Encoder option is not normally used.
Operating th e Equipment Locally Page 4-32 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Video Menu Video Source.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-3 3 ST.TM .E10076. 3 Input Source Select NOTE… This option is available in Build version 3.1.0 and later. To access the Input Source Select opti on, press the Input Source Select softkey from the Video Source Menu .
Operating th e Equipment Locally Page 4-34 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.25: Frame Rate Options Selected Option Descr iption 29.97 Hz Used in 525 li nes (NTSC-M + PAL-M). 25 Hz Used in 625 li nes (PAL).
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-3 5 ST.TM .E10076. 3 To access the Video Bandwi dth opti on, press the Video Bandwidth softkey from the Video Source Menu . Table 4.
Operating th e Equipment Locally Page 4-36 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.30: Noise Reduction Options Selected Option Descr iption Off Level 1 Use noise reducti on, if necessary , but don't 'damage' the picture i n any way.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-3 7 ST.TM .E10076. 3 Table 4.31: Profile/Level Options Selected Option Descr iption MP@ML Main Profile @ Main Level . Typical ly used in 4:2:0 di rect to home.
Operating th e Equipment Locally Page 4-38 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.33: Seamless Mode Bit-rate (Full Resolution Only) Profile Seamless 1 (Mbit/s) Seamless 2 (Mbit/s) Seamless 3 (Mbit/s) Seamless 4 (Mbit/s) Seamless 5 (Mbit/s) Seamless 6 (Mbit/s) 4:2:0 0.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-3 9 ST.TM .E10076. 3 It is possibl e to operate the Encoder in a stand-al one Variabl e Bit-rate (VBR) mode .
Operating th e Equipment Locally Page 4-40 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 The required p i cture qual ity i s set in the sam e m enu by the VBR T arget Quality it em . When running i n VBR Mode the two top-l evel status screens show the cu rre nt bit -r ate be ing us ed .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-4 1 ST.TM .E10076. 3 Table 4.34: Resolution Options Selected Option Description.
Operating th e Equipment Locally Page 4-42 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.37: AFD Information Video Input Encoder Video Index Ext.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-4 3 ST.TM .E10076. 3 GOP Len gth Option To access the Group of Pictures (GOP) Length option, press the GO P Length softkey in the Video Encoder Menu .
Operating th e Equipment Locally Page 4-44 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 With frame pi ctures a fra me of a fiel d 1 and fi eld 2 is encoded as a singl e unit.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-4 5 ST.TM .E10076. 3 PID Option The PID option i s sel ected f r om the Video Encoder Menu by pressing the PID softkey. The o ption is used for entering or updating video PIDs, as required .
Operating th e Equipment Locally Page 4-46 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 4.8.4 Vertical Blanking Interval (VBI) Menu Overview The VBI Menu i s selected from the Video Menu by pressing the VBI softkey.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-4 7 ST.TM .E10076. 3 VBI In P icture Opti on NOTES… 1. The VBI in Pictur e option is only accessible if the selected video profile/level is 422P@ML 6 .
Operating th e Equipment Locally Page 4-48 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 WSS (Line 23) Option NOTES… 1. This option is only available when Frame Rate is 25 Hz. 2. Aspect ratio will change when WSS is enabled.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-4 9 ST.TM .E10076. 3 Table 4.43: VBI - Line ‘n’ Options Option Description Frame Rate = 29.97 Hz Off VBI data i s not extracted from the li ne.
Operating th e Equipment Locally Page 4-50 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 FIELD 1 FIELD 2 272 9 Same options as li ne 10 10 VITC (SMPTE),.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-5 1 ST.TM .E10076. 3 FIELD 1 FIELD 2 7 Teletext Sys tem B or Inverted Teletext,.
Operating th e Equipment Locally Page 4-52 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 4.9 Audio Menu 4.9.1 Overview The Audio Menu i s selected from the Setup Menu by pressing the Audio softkey. This menu permits the sel ect i on of audio parameters.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-5 3 ST.TM .E10076. 3 Audio Menu Audio A .
Operating th e Equipment Locally Page 4-54 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Source Option To access the Source option, press the Source softkey in the Audio A Menu .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-5 5 ST.TM .E10076. 3 Audio Bit-rate Option NOTES… 1. This option is only shown when the Coding Standard is AC-3 Pass-Thru, MP EG Layer 2 or Dolby Digital (AC-3).
Operating th e Equipment Locally Page 4-56 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Input Leve l R Option NOTE… This option is not shown when the Coding Standard is MPEG Layer 2 (mono) or Dolby Digital (A C-3) (1/0).
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-5 7 ST.TM .E10076. 3 Lip Sync Offset Option NOTE… This option is only available if the Auto Lip Sync option is set to On. To access the Lip Sync Offset opti on, press the Li p Sync O ffset softkey in the Audio A Menu .
Operating th e Equipment Locally Page 4-58 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Clip Level Option To access the Cli p Lev el option, press the Clip Leve l softkey in the Audio A Menu . T his sc re en en able s the au dio clip pin g le vel t o b e s e t.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-5 9 ST.TM .E10076. 3 SMPTE 302M Standard Option NOTES… 1. This option is only shown when the Coding St andard is Linear PCM or Dolby E P ass-Thru.
Operating th e Equipment Locally Page 4-60 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.55: Bit Stream Mode Options Selected Option Descr iptio.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-6 1 ST.TM .E10076. 3 Production Info Option NOTE… This option is only shown when the C oding Standard is Dolby Digital (AC-3). To access the Production Info opti on, press the Production Info softkey in th e Audio A Menu .
Operating th e Equipment Locally Page 4-62 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Copyright Option NOTE… This option is shown when the Coding Standard is Dolby Digital (AC-3) or MPE G Layer 2. To access the Copyright opti on, press the Copyright softke y in the Audio A Menu .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-6 3 ST.TM .E10076. 3 RF Prote ction Option NOTE… This option is only shown when the C oding Standard is Dolby Digital (AC-3). To access the RF Protection opti on, press the RF Protection softkey in the Audio A Menu .
Operating th e Equipment Locally Page 4-64 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Low Pass Filter Option NOTE… This option is only shown when the C oding Standard is Dolby Digital (AC-3). To access the Low Pass Fil ter opti on, press the Lo w P ass Filter softkey in the Audio A Menu .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-6 5 ST.TM .E10076. 3 4.9.3 Audio Languages Menu The Audio Languages Menu i s selected from the Audio Menu by pressing the Audio Langua ges softkey.
Operating th e Equipment Locally Page 4-66 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.65: Output Source Options Selected Option Descr iption SDI Embedded (1-4) Any of the SDI embedded audio feeds.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-6 7 ST.TM .E10076. 3 only s hown if M2/EOM2 /DAT option fitted Data Menu Data A - RS232.... Data B - RS422.... Data X A - RS232...
Operating th e Equipment Locally Page 4-68 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.68: Baud Rate Options Selected Option Description Selected Option Description 1200 1200 Baud rate. 9600 9600 Baud rate.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-6 9 ST.TM .E10076. 3 Bit-rate Opti on To access the Bit-rate opti on, press the Bi t-rate softkey in the Data B - RS422 Menu . This enab l es the bi t-rate of the RS-4 2 2 synchronous data channel to be set.
Operating th e Equipment Locally Page 4-70 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 4.10.4 Data XA - RS232 Menu (When M2/EOM2/DAT Fitted) Overview NOTE… In the Data XA - RS232 Menu, X = the number of the option slot that the module fits into.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-7 1 ST.TM .E10076. 3 Setu p Menu Out put Menu Satel lite Modul ator Menu IF Out.
Operating th e Equipment Locally Page 4-72 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 4.11.2 Output Format Option To access the Output Format option, press the Output Format softkey in the Output Menu .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-7 3 ST.TM .E10076. 3 Table 4.72: Band Plan Options Selected Option Selected Opt.
Operating th e Equipment Locally Page 4-74 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 NOTE… This option is status only unless Manual has been selected in the Band Plan option. Table 4.75: Bandwidth Options Selected Option Description 6 MHz Terrestrial transmitter channel spacing is 6 MHz.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-7 5 ST.TM .E10076. 3 If the Hierarchy option i s set to Alpha= n , then the FEC (HP) and FEC (LP) parameters provi de two l evels of modulati on.
Operating th e Equipment Locally Page 4-76 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.81: Other Frequency Options Selected Option Description None No other frequency is i n use. in use One or more other frequencies are i n use.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-7 7 ST.TM .E10076. 3 Table 4.84: FEC (Inner) Options Selected Option Description No conv. coding Cable channel does not use inner FE C rate.
Operating th e Equipment Locally Page 4-78 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Orbital Posi tion Option To access the Orbital Positi on opti on, press the Orbi ta l P osi ti on softkey in the Delivery Descriptor Menu .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-7 9 ST.TM .E10076. 3 IF Power Option To access the IF Power option, press the IF Power softkey in the Satellite Modulator Menu . Table 4.
Operating th e Equipment Locally Page 4-80 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Symbol Rate Opti on To access the Symbol Rate opti on, press the Symbol Rate softkey in the Satellite Modulator Menu .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-8 1 ST.TM .E10076. 3 Tx Bandwidth Factor Optio n To access the Tx Bandwidth Factor op ti on, press the Tx Ba ndwidt h Factor softkey in the Satellite Modulator Menu .
Operating th e Equipment Locally Page 4-82 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Sat Deliv Freq Option To access the Sat Deli v Freq opti on, press the Sat Deliv Freq softkey in the Satellite Modulator Menu.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-8 3 ST.TM .E10076. 3 Polaris ation Option To access the Polari sation opti on, press the Polarisation softke y in the Satellite Modulator Menu .
Operating th e Equipment Locally Page 4-84 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Frequency Option To access the Frequency option press the Fre quency softkey in the Satellite Modulator Menu . Table 4.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-8 5 ST.TM .E10076. 3 Preset Pwr N orm Optio n Refer to Preset Pwr Norm Op tion on page 4-81 for detail s.
Operating th e Equipment Locally Page 4-86 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Bandwidth Option To access the Bandwidth opti on, press the Bandwidth softke y in the OFDM Modulator Menu . Table 4.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-8 7 ST.TM .E10076. 3 Transmission Opt ion To access the Transmissi on option, press the Transmi ssion softkey in the OFDM Modulator Menu .
Operating th e Equipment Locally Page 4-88 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 4.11.11 Output Format = IP Streamer (3.1 and later) Own IP Address Option To access the Own IP Address opti on, press the Own IP Address softkey in th e IP Streamer Menu .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-8 9 ST.TM .E10076. 3 Multicast IP Address Opt ion This opti on is not used. Time To Live Option To access the Time To Li ve option, press the Ti m e To Live softkey in the IP Streamer Menu .
Operating th e Equipment Locally Page 4-90 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 4.12.3 Mux Output, With Remux Card To obtain an output when a Remux card is fi tted, set the opti ons in the foll owi ng menus: · Host Bit-rate Option on page 4-97 · Remux Mo dule menu – see Se ction 4.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-9 1 ST.TM .E10076. 3 Setup Menu Mux Men u Shaded options are s howing s tatus and cannot be changed. Mux.... Remux Module.... 1.Serv ice 2 .
Operating th e Equipment Locally Page 4-92 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Setup Menu Mux Menu Shaded op tions are showing status and cannot be change d. Mux.. .. Remux Modu le.... 2.Service 2, 7 .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-9 3 ST.TM .E10076. 3 4.12.6 Bit-rate (188) and Bit-rate (204) Option NOTE… If the Packet Length option is set to 188 bytes then only the Bit-rate (188) option is displayed.
Operating th e Equipment Locally Page 4-94 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 4.12.9 FPGA Firmware This option i ndicates the versi on of th e FPGA Firmware. It i s for status onl y and cannot be changed.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-9 5 ST.TM .E10076. 3 Enter up to seven di gits usi ng the keypad, then press the Enter softkey to accept the scrambling code. If less then seven digits are entered, they are prefixed with 0’s (zero) to give a seven digit code.
Operating th e Equipment Locally Page 4-96 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 To access the BISS 13 Key Entry option, press the BISS Key Entry softke y in th e Mux Menu .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-9 7 ST.TM .E10076. 3 4.13 Remux 4.13.1 Introduction If the Remux option module M2/EOM2/REMUX is fitted, there is an add itio na l ite m in t he Mux Menu (see Figure 4.
Operating th e Equipment Locally Page 4-98 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 NOTE… If Intelligent mode is selected, the Action On PID Error option (see page 4-30 ) in the Setup/System/Advanced Menu must be set to Auto Correct.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-9 9 ST.TM .E10076. 3 Table 4.120: Output Options Selected Option Description Off The servic e is not incl uded in the output. On The servic e is incl uded in the output, unscrambled.
Operating th e Equipment Locally Page 4-100 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Name Out Option To access the Name Out option press the Na me Out softkey in the 1.Service Menu . This option al l ows the service output name to be changed.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -101 ST.TM .E10076. 3 Major Channel Option NOTE… This option is only shown in ATSC mode. To access the Major Channel opti on, press the M a jor Cha nne l softkey in the 2.
Operating th e Equipment Locally Page 4-102 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 PMT PID Option NOTE… This option is status only for the Host En coder but can be changed for incoming services.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -103 ST.TM .E10076. 3 ECM (CA) PID Option NOTE… This option is status only for the Host Encoder but can be changed for incoming services.
Operating th e Equipment Locally Page 4-104 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Table 4.129: Audio (Type of Audio) Options Selected Option Description Min: 1 Max: 8190 (1FFEh) Step Size: 1 Data (Type of Data) Option NOTES… 1.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -105 ST.TM .E10076. 3 4.14 IRD Menu (3.1 and later) 4.14.1 Overview NOTE… This option is available in Build version 3.1.0 and later.
Operating th e Equipment Locally Page 4-106 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Setup Menu IRD Menu IRD Mode IRD TS Source IRD Demod (If Fitte d).... Service List.. .. IRD V ide o.. .. IRD A udi o1.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -107 ST.TM .E10076. 3 4.14.4 IRD Demod Menu Frequency Option To access the Frequenc y option, press the Freq uency softkey in the IRD Demod Menu .
Operating th e Equipment Locally Page 4-108 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Polaris ation Option To access the Polari sation opti on, press the Polarisation softke y in the IRD Demod Menu .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -109 ST.TM .E10076. 3 LNB Lo Freq Option To access the LNB Lo Freq option, press the LNB Lo Freq softkey in the IRD Demod Menu . Th is v alue s ho uld b e s et to th e L NB ’s low er loc al o s cillat or fr eq ue nc y.
Operating th e Equipment Locally Page 4-110 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Status Only Options for the IRD Demod Menu The followi ng options are for stat us onl y and cannot be changed.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -111 ST.TM .E10076. 3 525 Line Composite Option To acce ss the 525 Line Compos ite option, press the 525 Lin e Composit e softkey in the IRD Video Menu .
Operating th e Equipment Locally Page 4-112 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 EDH Enable Optio n To access the EDH Enable opti on, press the ED H Enab le softkey in the IRD Video Menu . This all ows the pass-through of Error Detection Hierarchy (EDH) to be either enabl ed or disabl ed.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -113 ST.TM .E10076. 3 4.14.7 IRD Audio 1 and Audio 2 Menus NOTE… The menu structures are identical for Audio Channel 1 and Audio Channel 2.
Operating th e Equipment Locally Page 4-114 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Table 4.153: Downmix Mode Options Selected Option Description Stereo Pair Dolby Pro Logic Stereo Mute State Opti on To access the Mute St ate option, p r ess the Mute State softkey in the IRD Audio Menu .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -115 ST.TM .E10076. 3 4.14.8 IRD CA Menu Overview If the I RD is o pe ra ting in t ra ckin g mode, then the IRD CA menu has no options because the CA i s automati ca l ly confi gured to match the settings of the host Encoder.
Operating th e Equipment Locally Page 4-116 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 4.14.9 IRD VBI Menu VITS Enable Option To access the VITS Enable opti on, press the VITS Enable softke y in the IRD VBI Menu .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -117 ST.TM .E10076. 3 4.14.10 IRD Data Menu Async Stream Option To access the Async Stream opti on, press the Async Stream so ftkey in the IRD Data Menu .
Operating th e Equipment Locally Page 4-118 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Teletext Stream Option To access the Teletext Stream opti on, press the Teletext Str eam softkey in th e IRD Data Menu .
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -119 ST.TM .E10076. 3 Restore Default s To access the Restore Defa ults opti on, press the Restore Defaults softkey in the Error Masks Menu .
Operating th e Equipment Locally Page 4-120 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Th e E nc od er no rma lly h olds th e f ollo win g c on fi.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -121 ST.TM .E10076. 3 4.17.5 Backup Configurations Backup FLASH stores a copy of each of the 16 user configurati ons when you select Store C o n f i g s in Backup , yo u will b e a sk ed fo r th e p as sw or d here.
Operating th e Equipment Locally Page 4-122 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Th is m en u pr ov ide s o pt ion s fo r lo ad ing and st or ing pre de fin ed configurati ons and updati ng and restoring backup confi gurations.
Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -123 ST.TM .E10076. 3 4.17.13 Factory 525 Defaults Option This option enabl es the 16 user configurati ons to be overwri tten by the factory default settings for 525 line/29.
Operating th e Equipment Locally Page 4-124 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 BLANK.
Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page 5-1 ST.TM .E 10076. 3 Chapter 5 5. W eb Browser Interface Contents 5.1 Introduction ............................................................... 5-3 5.2 How to Set Up Internet Explorer For the Web Browser Interface .
Web B rowser Interf ace Page 5-2 Instr uction Manual: ev olution 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 BLANK.
Web B rowser Interf ace Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page 5-3 ST.TM .E 10076. 3 5.1 Introduction There is a range of diagnostic and othe r utilities that can be accessed via a web browser, such as Internet Explor er.
Web B rowser Interf ace Page 5-4 Instr uction Manual: ev olution 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 Figure 5.2: Settings D ialog Box 4. For Check for new er ve rsio ns of stored pa g e s , sel ect Eve ry vi sit to the page or any changes made to th e pages will not be displayed.
Web B rowser Interf ace Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page 5-5 ST.TM .E 10076. 3 6. Click LAN Settings to op en the Local Area Network (L AN) Settings dialog box (see Figure 5.4 ). Figure 5.4: Local Area N etwork (LAN) Settin gs Dialog Box 7.
Web B rowser Interf ace Page 5-6 Instr uction Manual: ev olution 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 8. In the Exceptions area type the I P address of the Encoder. 9. Click OK as many times as necessary to close all dialog boxes until only the Internet Expl orer wi ndow is open.
Web B rowser Interf ace Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page 5-7 ST.TM .E 10076. 3 Figure 5.7: Build Info – Version Numb ers Figure 5.8: Build Info - R elease Notes Option 2 , Tools 1 - displays a screen simil ar to: · Figure 5.
Web B rowser Interf ace Page 5-8 Instr uction Manual: ev olution 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 Bandw i dth Calc ul ati o ns, OFD M Bit- ra te Ca lcul a tio n s - The Bit Rate Calculator (see Figure 5 .
Web B rowser Interf ace Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page 5-9 ST.TM .E 10076. 3 Figure 5.11: Tools – OSD Toolkit Video Monitor - The Vid eo Moni tor (see Figure 5.12 ) displays the video input to the Encoder.
Web B rowser Interf ace Page 5-10 Instruction Ma nua l: e v olutio n 5000 E57x x DSNG and DENG Voy ag er Encode r ST.TM .E100 76. 3 Figure 5.13: Backpla ne Modes Figure 5.14: Install ed Module s Option 6 , Licence d Feat ure s - shows a li st of all the features which are, and can be, enabled when the appro priate licence is purchased.
Web B rowser Interf ace Instru c tio n Manual: ev o lution 5000 E57x x DSNG and DENG Voy ag er Encoder Page 5-11 ST.TM .E 10076. 3 Option 8 , Encoder Error s – shows a list of Activ e Errors, Mask ed Acti ve Errors and Latched Errors.
Web B rowser Interf ace Page 5-12 Instr uction Ma nua l: e v olutio n 5000 E57x x DSNG and DENG Voy ag er Encode r ST.TM .E100 76. 3 BLANK.
Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 6-1 ST.TM .E10076. 3 Chapter 6 6. Preventive Maintenance and Fault-finding Contents 6.1 Introduction ............................................................... 6-3 6.
Preve ntive Maintenanc e and F ault-find ing Page 6-2 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 BLANK.
Preve ntive Maintenanc e and Fault-find ing Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 6-3 ST.TM .E10076. 3 6.
Preve ntive Maintenanc e and F ault-find ing Page 6-4 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 Replacement Parts When replacement parts are requi red, be sure the serv i ce technici an has used parts specifi ed by the manufacturer or whi ch have the same characteristi cs as the ori ginal part.
Preve ntive Maintenanc e and Fault-find ing Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 6-5 ST.TM .E10076. 3 6.
Preve ntive Maintenanc e and F ault-find ing Page 6-6 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 Figure 6.2: Finding the Diagnostics Menu LCD Display Test Press the LCD Display softkey to access the option and then press any key to cycle through the test pa tterns and to return to the menu.
Preve ntive Maintenanc e and Fault-find ing Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 6-7 ST.TM .E10076. 3 Buzzer Test Press the Buzzer softkey to access the opti on which i mmediatel y causes a buzzer to sound.
Preve ntive Maintenanc e and F ault-find ing Page 6-8 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 2. Confirm that the equi pment hardware confi guration i s suitabl e for the purpose and has been correctly i nstall ed and connected (see Chapter 2, Installing the Equipment ).
Preve ntive Maintenanc e and Fault-find ing Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 6-9 ST.TM .E10076. 3 Figure 6.3: Orientation of Fuse Carrier If the replacem ent fuse al so b l ow s, do not conti nue. Disconnect the equipment and contact Customer Servi ces for advi ce.
Preve ntive Maintenanc e and F ault-find ing Page 6-10 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 6.5.5 Audio Fault-finding If having problems when usi ng th e Dol by E Pass-through coding mode then refer to Annex G, Audio Modes , for information about using this mode.
Preve ntive Maintenanc e and Fault-find ing Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 6-1 1 ST.TM .E10076. 3 6.
Preve ntive Maintenanc e and F ault-find ing Page 6-12 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 6.4: Fans Not Working/Overheating Step Action If Result of Action is Yes… If Result of Action is No… 1 Check Fan Ro tation .
Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page A-1 ST.TM .E 10076. 3 Annex A A. Glossary The followi ng list covers most of the abbr eviations, acronyms and terms as used in TA NDB ER G Te lev is ion Li mit ed Ma nu als .
Glossary Page A-2 Instr uc tion Manual: ev o l utio n 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 B3ZS Bipola r with Thre e Zero Su bstit ution: A method of eliminati ng long zero s trings i n a transmiss ion.
Glossar y Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page A-3 ST.TM .E 10076. 3 Compressio n Reduction in the number of bi ts used to represent t he same informati on.
Glossary Page A-4 Instr uc tion Manual: ev o l utio n 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 Earth Technical Earth : Ensures that all equi pment chass is within a r ack are at the s ame potenti al, usuall y by connecting a wir e between the Technical earth termi nal and a sui table point o n the rack.
Glossar y Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page A-5 ST.TM .E 10076. 3 IF Intermediate F requency: Usually refers to the 70 MHz or 140 MHz outp u t of the Modulator in ca ble, satellite and terrestri al transmiss ion applic ations.
Glossary Page A-6 Instr uc tion Manual: ev o l utio n 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 LVDS Low Volta ge Dif fere ntial Si gnal: LVDS is a generic mul ti-purpos e Interface st andard fo r high spe ed / low powe r data transmis sion.
Glossar y Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page A-7 ST.TM .E 10076. 3 NVOD Near V ideo On De mand: Method of offering mul tiple showings of movies or events. The sh owings a re timed to start at set int ervals, dete rmined by the b roadcaster.
Glossary Page A-8 Instr uc tion Manual: ev o l utio n 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 Programme A linking of one or mor e events under the control of a bro adcaster.
Glossar y Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page A-9 ST.TM .E 10076. 3 SI Service Info rmation: Digital information describing the deliver y system, content a nd scheduling (timing) of broadcast data s treams.
Glossary Page A-10 Instru c tio n Manual: ev olution 5000 E57x x DSNG and DENG Voy a g er Encoder ST.TM .E100 76. 3 UART Universal A synchro nous Receiver Tr ansmitter : A device prov iding a se rial interface f or transmi tting and receiving data.
Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -1 ST.TM .E10076. 3 Annex B B. T echnical Specification Contents B.1 Inputs ...................................................................... B-3 B.1.1 Video.
Technical Sp ecific atio n Page B- 2 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 List of Tables Table B.1: Serial Di gital Video Speci fication ................................. B-3 Table B.2: H SYNC Specific ation .
Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -3 ST.TM .E10076. 3 B.1 Inputs B.1.1 Video SDI Table B.
Technical Sp ecific atio n Page B- 4 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 Analogue Video Specificatio n Table B.
Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -5 ST.TM .E10076. 3 Pattern Item Specification VITS Line 17 Pulse/bar K-rating ± 0.
Technical Sp ecific atio n Page B- 6 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 International Television St andards Table B.
Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -7 ST.TM .E10076. 3 NOTES… 1. Refer to Annex G, Audio Modes when using these coding standards.
Technical Sp ecific atio n Page B- 8 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 Item Specification Noise RMS L A-weighted 7 0 d B Unweighted 70 dB User Levels @ 1 kHz (0 to 50 d B) K +10 dB ±0. 2 dB -10 dB ±0.
Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -9 ST.TM .E10076. 3 B.3 Outputs B.3.
Technical Sp ecific atio n Page B- 10 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table B.13: IF Monitor Output Specification (1U, E5714) Item Specific.
Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -1 1 ST.TM .E10076. 3 Table B.15: IF OUT MONITOR Specification (E5740-IF) Item Specif.
Technical Sp ecific atio n Page B- 12 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table B.17: L-Band Monitor Output Specification (E5740-Lband) Item Sp.
Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -1 3 ST.TM .E10076. 3 B.4 Control and Monitoring B.
Technical Sp ecific atio n Page B- 14 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 B.4.6 RS-422 Data This provides an RS-422 sync hronous, serial communications data input interface. Table B.24: RS-422 Data Specification Item Specification Safety status SELV Type IT U-T V.
Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -1 5 ST.TM .E10076. 3 B.5 Power Supply B.5.1 AC Power Input This equipment is fitted with an wi de-ranging power supply. It is suitabl e for supply voltages o f 100-120 Vac - 10% +6% or 220-240 V ac -10% +6% at 50/60 Hz nominal.
Technical Sp ecific atio n Page B- 16 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 B.5.2 DC Power Input The power unit used i n the Encoder is a soft-start type designed for use on dc suppli es havi ng a negativ e or posi tive earth (vehi cle chassi s) v ol tage supply in the range 12 to 36 Vdc.
Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -1 7 ST.TM .E10076. 3 B.7 Environm ental Con ditions Table B.
Technical Sp ecific atio n Page B- 18 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 B.8.2 EMC 2 The equipm ent has b een d esi gned and tested to m eet t.
Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -1 9 ST.TM .E10076. 3 B.8.4 CE Marking The CE mark is affixed to indicate compli ance.
Technical Sp ecific atio n Page B- 20 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 B.10 Option Modules B.10.1 M2/EOM2/AUDLIN Additional Audio and Linear PCM Option Module See Section B.1.2, Audio fo r details.
Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -2 1 ST.TM .E10076. 3 B.10.3 M2/EOM2/REMUX Remux Option Module Connector s NOTE… The M2/EOM2/REMUX Remux Option Module is s upported by Encoder software version 2.
Technical Sp ecific atio n Page B- 22 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table B.35: DVB ASI Out 1 - LED Indications Item Specification Red LE.
Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -2 3 ST.TM .E10076. 3 B.10.4 M2/EOM2/XLR , XLR Expander Card Option NOTE… The M2/EOM2/XLR, XLR Ex pander Card Option is supported by Encoder software version 3.
Technical Sp ecific atio n Page B- 24 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 B.10.5 M2/EOM2/DEC, SD Decoder Card Option NOTE… The M2/EOM2/DEC, SD Decoder Card Option is supported by Encoder software version 3.
Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -2 5 ST.TM .E10076. 3 Table B.40: Audio Output (SD Decoder) Item Specification Safety.
Technical Sp ecific atio n Page B- 26 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 B.10.6 M2/EOM2/QPSKDEMOD, QPSK Demodulator Card Option NOTE… The M2/EOM2/QPSKDEMOD, QPSK Demodulator Card Option is supported by Encoder software version 3.
Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -2 7 ST.TM .E10076. 3 B.10.7 M2/EOM2/SATDEMOD, 16QAM Demodulator Card Option NOTE… The M2/EOM2/SATDEMOD, 16QA M Demodulator Card Option is supported by Encoder software version 3.
Technical Sp ecific atio n Page B- 28 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 BLANK.
Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page C-1 ST.TM .E10076. 3 Annex C C. Predefined User Configurations Contents C.1 Introduction ............................................................... C-3 C.2 525/625 Line Default Settings .
Predefined User Configurati ons Page C-2 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 BLANK.
Predefined User Configurati ons Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page C-3 ST.TM .E10076. 3 C.1 Introduction There are sixteen p r ed ef i ned user confi gurati ons. These are a q ui ck and easy way to confi gure the Encoder wi thout having to enter i ndivi dual parameters.
Predefined User Configurati ons Page C-4 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Module Parameter Default Value Output M ode Satellite Setup Passw.
Predefined User Configurati ons Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page C-5 ST.TM .E10076. 3 Module Parameter Default Value Ident Text Ident Mode Ident Te.
Predefined User Configurati ons Page C-6 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Module Parameter Default Value Language (R) E nglish Clip Level 1.
Predefined User Configurati ons Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page C-7 ST.TM .E10076. 3 C.4 Predefined User Configurations The predefi n ed user confi gurati ons have the same settings as Table C.2 except for those differences shown in Tabl e C .
Predefined User Configurati ons Page C-8 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Configuration Number Service Na me Variable Value 11 Mega Lo w Delay 6 MHz Video Bit-rate 2 Mbi t/s Video Compression Mode Mega Low Delay Video Profile/Level MP@ML GOP Structure IP 12 Mega Lo w Delay 7.
Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page D-1 ST.TM .E10076. 3 Annex D D. Language Abbreviations Languages are shown in al phabeti cal order.
Language A b brev iations Page D- 2 I nst ructi on Ma nual : evolu tion 5000 E57xx DSN G and D ENG Voya ger Encoder ST.TM .E10076. 3 The followi ng non-ISO 1 languages are supported. NOTE… Only applicable for a transport stream going to an Alteia Receiver.
Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page E-1 ST.TM .E10076. 3 Annex E E. Creating and Downloading a Logo Contents E.1 Introduction ............................................................... E-3 E.2 Summary of Features.
Creating and Do wnloading a Lo go Page E- 2 In stru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 BLANK.
Creating and Do wnloading a Lo go Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page E-3 ST.TM .E10076. 3 E.1 Introduction Th e E nc od er inc lude s a lo go o ve rla y fa cilit y w he re by a n ima ge ca n b e ov er laid o nt o t he ac tive vid eo pr ior to en co din g.
Creating and Do wnloading a Lo go Page E- 4 In stru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Figure E.1: Web Browser Interface The dial ogue box, see Figure E.
Creating and Do wnloading a Lo go Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page E-5 ST.TM .E10076. 3 Figure E.3: Files for OSD Creator and Loader E.4 Creating a Logo Using OSD Creator Osd Creator ( creator.exe ) is a n ap plic at ion fo r cr ea tin g lo go file s ( .
Creating and Do wnloading a Lo go Page E- 6 In stru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 An ex amp le o f a log o is sh ow n in Figure E.4 . Figure E.4: OSD Creator Screen Showing Example Logo E.5.2 Loading a .
Creating and Do wnloading a Lo go Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page E-7 ST.TM .E10076. 3 Osd Creator use s a colour palette with a maximum of 256 entries.
Creating and Do wnloading a Lo go Page E- 8 In stru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Clic k th e K ey File toolbar button. Select the key file . T he inacti ve area of the image shoul d now be transparent (background-coloured).
Creating and Do wnloading a Lo go Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page E-9 ST.TM .E10076. 3 E.6 Downloading a Logo Using OSD Loader The Osd Loader app lica tio n ( os d. ex e) is u se d f or do wnlo ad ing logo ( .
Creating and Do wnloading a Lo go Page E- 10 In struct ion M anu al: evolut ion 5000 E57xx D SNG an d DEN G Voyager En coder ST.TM .E10076. 3 The Resolution Mode must be set to match th e video resol uti on b ei ng used. This ad justs the p rev iew screen to the di mensi ons of the acti ve video.
Creating and Do wnloading a Lo go Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page E-1 1 ST.TM .E10076. 3 576 Lines 1 720 720 P ixel s Digita l Activ e Pictur e 70.
Creating and Do wnloading a Lo go Page E- 12 In struct ion M anu al: evolut ion 5000 E57xx D SNG an d DEN G Voyager En coder ST.TM .E10076. 3 E.7.3 Show and Hide Regions The Download button defines a Region in the Encoder, which remains until the Encoder is turned off, the Remove but ton is c lic ked , o r t he Region i s Download ed again.
Creating and Do wnloading a Lo go Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page E-1 3 ST.TM .E10076. 3 E.8 Fault-finding If there appears to be a problem creati.
Creating and Do wnloading a Lo go Page E- 14 In struct ion M anu al: evolut ion 5000 E57xx D SNG an d DEN G Voyager En coder ST.TM .E10076. 3 BLANK.
Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page F-1 ST.TM .E10076. 3 Annex F F. Band Plans Contents F.1 Channels and Centre Frequencies ........................... F-3 List of Tables Table F.1: Australi a ........
Band Plans Page F- 2 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voyager Encoder ST.TM .E10076. 3 BLANK.
Band Plans Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Pag e F -3 ST.TM .E10076. 3 F.1 Channels and Centre Frequencies The Output Menu has opti ons cal led Band Plan and Channel (see Chapter 4, Operating the Equipment Locally ).
Band Plans Page F- 4 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voyager Encoder ST.TM .E10076. 3 Table F.2: Europe VHF UHF Channel Centre Frequency in MHz UHF Channel Centre Frequency in MHz E 2 50.500 E 8 198.500 E 3 57.500 E 9 205.
Band Plans Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Pag e F -5 ST.TM .E10076. 3 Table F.6: New Zealand UHF Channel Centre Frequency in MHz UHF Channel Centre Frequency in MHz 1 47.500 6 191.500 2 57.500 7 198.500 3 64.
Band Plans Page F- 6 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voyager Encoder ST.TM .E10076. 3 Table F.9: Ireland UHF Channel Centre Frequency in MHz UHF Channel Centre Frequency in MHz I A 48.500 I F 194.000 I B 56.500 I G 202.000 I C 64.
Band Plans Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Pag e F -7 ST.TM .E10076. 3 Table F.13: Japan UHF Channel Centre Frequency in MHz UHF Channel Centre Frequency in MHz UHF Channel Centre Frequency in MHz UHF Channel Cent re Frequency in MHz J 1 93.
Band Plans Page F- 8 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voyager Encoder ST.TM .E10076. 3 Table F.15: CCIR 2 UHF Channel Centre Frequency in MHz UHF Channel Centre Frequency in MHz UHF Channel Centre Frequency in MHz 21 474.
Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page G-1 ST.TM .E10076. 3 Annex G G. Audio Modes Contents G.1 Analogue Audio ........................................................ G-3 G.2 Digital Audio ..............
Audio Modes Page G- 2 Instruct ion M anu al: evolut ion 5000 E 57xx DSNG an d DEN G Voyager En coder ST.TM .E10076. 3 BLANK.
Audio Modes Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page G-3 ST.TM .E10076. 3 G.1 Analogue Audio Figure G.1 shows the coding methods that may be used with the anal ogue audio input.
Audio Modes Page G- 4 Instruct ion M anu al: evolut ion 5000 E 57xx DSNG an d DEN G Voyager En coder ST.TM .E10076. 3 G.3 Embedded Audio on the SDI Figure G.3 shows the audio signal flow on the Base Board. Whi le si x audio stereo pairs are availabl e, only two stereo pairs can be processed by the Base Board at any one time.
Audio Modes Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page G-5 ST.TM .E10076. 3 4:1 4:1 Grou p 1 Grou p 2 Grou p 3 Grou p 4 Grou p 1 Grou p 2 Grou p 3 Grou p 4 S.
Audio Modes Page G- 6 Instruct ion M anu al: evolut ion 5000 E 57xx DSNG an d DEN G Voyager En coder ST.TM .E10076. 3 BLANK.
Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page H-1 ST.TM .E10076. 3 Annex H H. Error Messages Contents H.1 Introduction ............................................................... H-3 H.2 Dealing with Error Messages .
Error Messages Page H- 2 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 BLANK.
Error Messages Page H- 3 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DEN G Voyager En coder ST.TM .E10076. 3 H.1 Introduction WARNING… DO NOT REMOVE THE COVERS OF THIS EQUIPMENT. HAZ ARDOUS VOLTAGES ARE PRESENT WITHIN THIS EQUIPMENT AND MAY BE EXPOSED IF THE COVERS ARE REM OVED.
Error Messages Page H- 4 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 H.3 General Errors Table H.1: General Error Messages Err or Message Action to .
Error Messages Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page H-5 ST.TM .E10076. 3 H.4 Video Source Related Errors Table H.2: Video Source Error Messages Err or Message Action to Take Comms Error P ower Encoder off, then check that the Base Board i s firmly s eated in the chassis .
Error Messages Page H- 6 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 H.5 VBI Related Errors Table H.3: VBI Error Messages Err or Message Action to Take Duplicate VBI PID Invalid VBI PID Duplicate Tel etext PID Invalid Teletext PID Check the Encoder confi guration.
Error Messages Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page H-7 ST.TM .E10076. 3 H.8 Video Encoder Related Errors Table H.6: Video Encoder Error Messages Err or Message Action to Take Comms Error Config Update VCM Stopped Power Encoder off, then check that the Bas e Board is firmly seated in the chassis .
Error Messages Page H- 8 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 Err or Message Action to Take Level Clippi ng Left Level Cli pping Right Audio input level on the reported channel is too hi gh and is being cl ipped.
Error Messages Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page H-9 ST.TM .E10076. 3 H.11 Remux Related Errors Table H.9: Remux Error Messages Err or Message Action to Take Overflow On Input 1 Overflow On Input 2 Overflow On Input 3 Reduce incomi ng bit-rate.
Error Messages Page H- 10 Instru ction Man ual : evolu tion 5000 E57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 BLANK.
Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page I-1 ST.TM .E10076. 3 Annex I I. Accuracy of Frequency Sources This equipment is based around IS O/IEC 13818 spe cificati ons (commonly kno wn as MP EG -2) an d w ithin th es e s pe c ifica tio ns all t iming is d er ive d from a 27 MHz system cl ock.
Accuracy of Frequency Sources Page I- 2 Instruc tion Man ual: evolut ion 5000 E 57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 BLANK.
Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG V o yage r Enc o der Page J-1 ST.TM .E10076. 3 Annex J J. Use of Remux Card in ASTC Contents J.1 Remux Card In ATSC With Internal PSIP ................. J-3 J.2 Remux Card In ATSC With External PS IP .
Use of Remu x Card in ASTC Page J -2 In stru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 BLANK.
Use of Remu x Card in ASTC Page J -3 In struc tion Man ual: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 J.1 Remux Card In ATSC With Inte rnal P S IP The Encoder automaticall y remuxes ATSC streams arri ving at i ts inputs, as in DVB.
Use of Remu x Card in ASTC Page J -4 In stru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 In th is c on figu ra tio n th e E nc od er ge nerates the PAT, CAT and PMT for all pro gr am s bu t it is t he re sp on sibilit y o f t he us er to p ro vid e a ll the PS IP fo r the associated programs.
Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG V o yage r Enc o der Page K-1 ST.TM .E10076. 3 Annex K K. EDH Capability for E57xx Encoders Contents K.1 EDH Capability for E57xx Encoders.......................... K-3 List of Tables Table K.
EDH Capab ility f or E5 7xx Enc o der s Page K- 2 In struct ion M anu al: evoluti on 5000 E57xx D SNG an d DENG Voyager Encoder ST.TM .E10076. 3 BLANK.
EDH Capab ility f or E5 7xx Enc o der s Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG V o yage r Enc o der Page K-3 ST.TM .E10076. 3 K.1 EDH Capability for E57 xx Encoders Table K. 1 con ta ins ED H c apa bilit y fo r d iffe re nt mu x fir mwa re ve rs ion s.
EDH Capab ility f or E5 7xx Enc o der s Page K- 4 In struct ion M anu al: evoluti on 5000 E57xx D SNG an d DENG Voyager Encoder ST.TM .E10076. 3 BLANK.
Instructio n Manual: e v o lution 50 0 0 E57 x x DSNG and DENG V oyag e r Encode r Inde x -1 ST.TM .E10076. 3 Indexes Th is s ec tio n is sp lit in to two pa rt s. T he fir st is t he General Inde x and the second i s devoted to Setu p Menus and Associated Option s .
Indexes Index-2 Inst ructi on Ma nua l: evolu tion 5000 E57xx DSN G and D ENG Voya ger Encoder ST.TM .E10076. 3 B background colour option, 4-34 backup configurations, 4-120 band plan option, 4-72 ban.
Indexes Instructio n Manual: e v o lution 50 0 0 E57 x x DSNG and DENG V oyag e r Encode r Inde x -3 ST.TM .E10076. 3 dolby digital ac-3, 1-12 dolby srnd mode option, 4-60 DST end date ATSC, 4-21 DST .
Indexes Index-4 Inst ructi on Ma nua l: evolu tion 5000 E57xx DSN G and D ENG Voya ger Encoder ST.TM .E10076. 3 changing from the front panel menus, 2-22 methods of changing, 2-21 IP address option, 2.
Indexes Instructio n Manual: e v o lution 50 0 0 E57 x x DSNG and DENG V oyag e r Encode r Inde x -5 ST.TM .E10076. 3 option modules, B-20 16qam demodulator option, 3-26 additional audio input module,.
Indexes Index-6 Inst ructi on Ma nua l: evolu tion 5000 E57xx DSN G and D ENG Voya ger Encoder ST.TM .E10076. 3 sabus data bits option, 4-26 sat deliv freq option, 4-82 , 4-85 sat orb pos option, 4-82.
Indexes Instructio n Manual: e v o lution 50 0 0 E57 x x DSNG and DENG V oyag e r Encode r Inde x -7 ST.TM .E10076. 3 transport stream id option, 4-23 ts pkts/UDP frm option, 4-88 TT7000 system manage.
Indexes Index-8 Inst ructi on Ma nua l: evolu tion 5000 E57xx DSN G and D ENG Voya ger Encoder ST.TM .E10076. 3 Setup Menu s and Ass ociated Options Index 1 1.
Indexes Instructio n Manual: e v o lution 50 0 0 E57 x x DSNG and DENG V oyag e r Encode r Inde x -9 ST.TM .E10076. 3 config name, 4-26 fan control, 4-28 keypress beep option, 4-27 local date, 4-26 lo.
Indexes Index-10 In struct ion M anu al: evolut ion 5000 E57xx D SNG an d DEN G Voyager En coder ST.TM .E10076. 3 R remote control menu, 4-24 gateway address, 4-24 IP address, 4-24 last SNMP master, 4.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il TANDBERG E5740 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del TANDBERG E5740 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso TANDBERG E5740 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul TANDBERG E5740 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il TANDBERG E5740, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del TANDBERG E5740.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il TANDBERG E5740. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo TANDBERG E5740 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
