Manuale d’uso / di manutenzione del prodotto 6620 LDF del fabbricante Sylvania
Vai alla pagina of 48
6620 20 MENU SELECT CHANNEL VOL UME POWER EJECT PLAY STOP.
1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed W arnings -All warnings on the appliance and in the operating instructions should be adhered to.
9.V entilation- Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the unit and to protect it from overheating, and these openings must not be blocked or covered. The open- ings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface.
- 4 - EN P RECA UTIONS - 4 - EN - 4 - EN IMPOR T ANT COPYRIGHT INFORMA TION Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S.
For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • A void dusty or humid places. • A void places with insufficient ventilation for proper heat dissipation.
SUPPLIED A CCESSORIES . . . . . . . . . . . . . . . . . . . . . . .2 IMPORT ANT SAFEGU ARDS . . . . . . . . . . . . . . . . . . . . . .2 PRECA UTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 LOCA TION . . . . . . . . . . . . . .
- 7 - EN - 7 - EN - 7 - EN - 7 - EN • MTS/SAP T uner • Infrared r emote control • T rilingual on scr een TV setup display available in English, Spanish or Fr ench • 181 channel capability PLL fr equency synthesizer tuner with dir ect station call (A converter may be necessary to view scrambled cable channels.
1. POWER button (P .12) Press to turn the power on and off. 2. PICTURE button (P .14) Press to adjust the picture. 3. Number buttons (P .13) Press to select a desired channel number directly . +100 button (For TV mode) Press to select channels higher than 99.
31. ST OP P button (P .19) Press to stop operation of the disc. 32. MENU button Press to enter or exit the setup menu of TV/DVD. 33. V OLUME X / Y buttons (P .12) Press to control the volume level for the DVD and TV . 34. CHANNEL X / Y buttons (P .12) Press to select memorized channels.
IF YOU HA VE A JACK ON THE W ALL Connect the TV to the wall-mounted antenna jack with on RF cable (commercially available). IF YOU HA VE A WIRED CABLE Connect the TV to the wired antenna cable. • Before plugging the antenna into the ANT . jack of the unit, check that the pin is not bent.
• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DA T deck. • If connected to a Dolby Digital decoder , set “DOLBY DIGIT AL ” to “BITSTREAM” for audio output in the setup mode.
• Shaded buttons are used for following operation. 1 Plug the power cord into a standard AC outlet. • If any digits are displayed in the corner of the screen, press [PO WER] without unplugging the power cord. 2 Press [PO WER] to turn on the unit. 3 Press [CH.
- 13 - EN AUTO CHANNEL PROGRAMMING As the initial setting, this unit has memorized all channels, including the ones not available in your area. This feature automatically puts only available channels into the memory . 1 Press [SETUP] then press [ K ] or [ L ] to point to “CHANNEL SET UP” .
- 14 - EN • Shaded buttons are used for following operation. The unit’ s picture controls, brightness, contrast, color , tint and sharpness, are preset to factory speci- fications. Although they are usually the best, you may need to make some further adjustments for a more natural looking image.
- 15 - EN Y ou can view specially labeled (cc) TV programs, movies, news and pre-recorded tapes with either a dialogue caption or text display . CAPTION mode: Y ou can watch dramas, movies and news while captioning the dialogues and the contents of news.
- 16 - EN - 16 - EN - 16 - EN - 16 - EN • Shaded buttons are used for following operation. V -CHIP SET UP This feature enables parents to prevent their children from watching inappropriate material on TV . When you try to access a program which is blocked, “PRO- TECTED PROGRAM b y .
- 17 - EN - 17 - EN - 17 - EN - 17 - EN - 17 - EN - 17 - EN 6 Press [SETUP] to e xit the menu. • To change the rating, the TV must be turned to an unprotected program. If “ PRO TECT- ED PROGRAM b y ... ” appears on the screen, please change the channel to a station that is not protected.
– 18 – EN • NEVER play back the following discs. Otherwise, the unit may result in malfunction. DVD-RAM / CD-I / Photo CD / V ideo CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-R.
– 19 – EN • Shaded buttons are used for following operation. GETTING ST ARTED T urn on the power of amplifier and any other compo- nents, if necessary . 1 Press [PO WER] then the pow er will tur n on. 2 Open the disc door manually . 3 Inser t a disc with the label facing bac k of the unit to star t playing it.
1 Press [DISC MENU] . • The DVD main menu will appear . • If the feature is not available, symbol may appear on the TV screen. • If disc menu is available on the disc, audio lan- guage, subtitle options, chapters for the title and other options will appear for selection.
1 During playbac k, press [FWD D ] or [REV E ] . • “ D 1” or “ E 1” appears on the screen. 2 To select another speed, repeat step 1 until y our required speed n umber appears on the screen. • For DVDs, fast forward/reverse search speed is different depending on the disc.
– 22 – EN • Shaded buttons are used for following operation. There are three ways to begin playback on an Audio CD and MP3 at a specific track. Using the number buttons 1 Press the Number buttons to enter the desired trac k number . • Playback will start at the selected track.
– 23 – EN 1 During playbac k, press [SEARCH MODE] repeatedly to displa y the Time Search on the TV screen. 2 Within 30 seconds, enter a desired disc time using the Number buttons . • Playback will start at the specified time. • Press [CLEAR] to erase the incorrect input.
• Shaded buttons are used for following operation. REPEA T is available only during playback. For DVD-Vs 1 To activ ate the repeat function, press [REPEA T] during playbac k. • The repeat mode changes as described below every time you press the button.
– 25 – EN DVD SECTION S PECIAL PLA YBA CK FUNCTION Y ou may determine the order in which tracks will play . 1 In stop mode, press [MODE] . • The “PR OGRAM” screen will appear . 2 Press [ ▲ ] or [ ▼ ] to select a track, then press [ENTER].
– 26 – EN • Shaded buttons are used for following operation. The unit allows you to select a language for subtitles during DVD disc (if available) playback. 1 Press [SUBTITLE] during playbac k. • The subtitle language will appear on the display bar at the top of the TV screen.
– 27 – EN Some DVD discs contain scenes which have been shot simultaneously from various angles. Y ou can change the camera angle when the “” icon appears on the screen. 1 Press [ANGLE] during playbac k. • The selected angle will be displayed on the dis- play bar at the top of the screen.
NO TE – 28 – EN • Shaded buttons are used for following operation. Y ou can check the information about the current disc by pressing [DISPLA Y] . For DVD-Vs 1 Press [DISPLA Y] during playbac k to show current Chapter . 2 Press [DISPLA Y] again to show current Title .
– 29 – EN • Shaded buttons are used for following operation. Y ou can change the DVD player ’ s settings. 1 In stop mode, press [SETUP] twice , [ L ] to select “CUST OM” then press [ENTER] . • If the menu does not appear , press [PLA Y O ] first, then press [ST OP C ] .
– 30 – EN DISPLA Y SETTING Follow steps 1 to 2 in the on page 29. 3 Press [ K ] or [ L ] to select the below items then press [ENTER] . TV MODE: Y ou can change certain aspects of the DVD display screens and on-screen messages on the TV screen. • 4:3 LETTER BOX (default): T o show black bars on top and bottom of the screen.
– 31 – EN P ARENT AL CONTROL Parental Control limits the disc viewing that exceed your setting (with a password or playback will stop). This feature allows you to prevent discs with alterna- tive scenes from being played by your children. P ARENT AL LEVEL Parental Level allows you to set the rating level of your DVD discs.
– 32 – EN • Shaded buttons are used for following operation. This allows you to return all selections of SETUP (except for “P ARENT AL ” and menu language ) to their default settings. 1 Press [SETUP] twice in stop mode so that the “INITIALIZE” menu appears.
– 33 – EN Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money . TV Mode PROBLEM CORRECTIVE ACTION No picture or sound • Make sure the AC cord is connected to an AC outlet.
– 34 – EN CLOSED CAPTION PROBLEM POSSIBLE REMEDY Misspelling in captions • Error committed by the closed captioning production company . • Possible in a live broadcast. Not in case of a prerecorded program. T ext is not shown in its entirety or • A few seconds of delay is common for live broadcast.
– 35 – EN • Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner ’ s Manual for details on correct operations. • Playback from a desired track and random playback are not available during program playback.
– 36 – EN CABINET CLEANING • W ipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry . • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed sur- faces.
– 37 – EN LCD : 20 inch T elevision system : NTSC-M Closed caption system : §15.1 19/FCC Channel coverage: VHF: 2 ~ 13 UHF: 14 ~ 69 CA TV : 2 ~13, A ~ W , W+1 ~ W+84, A-5 ~ A-1, 5A T uning System.
- 38 - ES 1. Botón PO WER Presione para encender y apagar la unidad. 2. Botón PICTURE Presione para ajustar la imagen. 3. Botones numéricos Presione para seleccionar directamente el número de canal deseado . Botón +100 (para modo TV) Presione para seleccionar canales cuyo número sea superior a 99.
P ARA INSERT AR LAS PILAS 1 Abra la cubier ta del compar timiento de las pilas empujando la cubier ta del mando a dis- tancia en el sentido de la flecha. 2 Inser te 2 pilas “AA” en el compar timiento de las pilas, en el sentido indicado por las mar- cas de polaridad (+/-).
- 40 - ES SI TIENE UNA TOMA DE P ARED Conecte el televisor a la toma de antena de pared con el cable RF (disponible en los comercios). SI TIENE CABLE DE HILOS Conecte el televisor al cable de antena. • Antes de conectar la antena en la toma ANT . de la unidad, compruebe que la patilla no esté torcida.
- SALID A DE A UDIO DIGITAL AUDIO OUT (COAXIAL) Descodificador Dolby Digital A toma de ENTRADA DIGITAL COAXIAL DE AUDIO Equipo doméstico de audio Podrá disfrutar de un sonido de DVD con más presencia desconectando el equipo de audio digital, tal como el descodificador Dolby Digital.
- 42 - ES • Los botones sombreados se utilizan para las siguientes operaciones. 1 Conecte el cable de alimentación de la unidad a una toma estándar CA. • Si se visualiza algún dígito en la esquina de la pantalla, presione [PO WER] sin desconectar el cable de alimentación.
- 43 - ES PROGRAMACIÓN AUTOMÁTICA DE CANAL De acuerdo con la configuración de fábrica, esta unidad ha memorizado todos los canales, incluidos los que no están disponibles en su localidad. Esta función solo pone automáticamente en memoria los canales disponibles.
- 44 - ES • Los botones sombreados se utilizan para las sigu- ientes operaciones. P ARA EMPEZAR Si es necesario, encienda el amplificador y cualquier otro componente. 1 Presione [PO WER] para encender la unidad. 2 Abra la bandeja del disco manualmente .
- 45 - ES 1 Presione [DISC MENU] . • Aparecerá el menú principal de DVD • Si esta función no está disponible, el símbo- lo puede aparecer en la pantalla del televisor . • Si el menú de disco está disponible en el disco, aparecerán las opciones de idioma de audio, de subtítulos, capítulos del título y otras para su selección.
- 46 - ES MEMO.
- 47 - ES MEMO.
Printed in China 1EMN20477 L3250UA ★★★★★ LIMITED W ARRANTY FUNAI CORP . will repair this SYL V ANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURA TION: PA R TS: FUNAI CORP .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sylvania 6620 LDF è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sylvania 6620 LDF - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sylvania 6620 LDF imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sylvania 6620 LDF ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sylvania 6620 LDF, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sylvania 6620 LDF.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sylvania 6620 LDF. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sylvania 6620 LDF insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
