Manuale d’uso / di manutenzione del prodotto POL 10550 del fabbricante Swisher
Vai alla pagina of 16
50 ” FRONT MOUNT/ TRAILMOWER OWNER’S MANUAL 1602 CORPORATE DRIVE, P.O. BOX 67, WARRENSBURG, MISSOURI 64093 PHONE 660-747-8183 FAX 660-747-8650 MODEL NO. Manufacturing quality lawn care equipment since 1945 Assembly Operation Service and Adjustment Repair Parts Made In The USA Rev.
SAFETY PRECAUTIONS • Read the manual. Learn to operate this machine safely. • Always disconnect the spark plug wire and place the wire where it cannot contact the spark plug, to prevent accidental starting the engine when setting up, trans porting, adjusting or making repairs.
• Turn off the blades when not mowing. Before leaving the machine, turn off the blades and stop the engine. • Watch for traffic when operating near or crossing roadways. • Do not operate the mower if it has been dropped or damaged in any manner or if the mowe r vibrates excessively.
MOWER MAINTENANCE GENERAL RECOMMENDATIONS The warranty on this trailmower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain unit as instructed in this manual.
LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship.
OPERATING YOUR MOWER INTENDED USE This trail mower is designed to produce a quality finish cut on lawns, golf courses, etc. It is not designed to clear brush or cut saplings. Your mower be should pushed in front of or be towe d behind an ATV, a golf cart, lawn tractor, or another similar approved vehicle.
STARTING THE ENGINE • See engine manufacturer’s instructions for the type and amount of oil and fuel used. Engine must be level to accurately check and fill oil. Do not overfill. • Park vehicle and mower on a level surface, set the vehicle p arking brake, and disengage blades.
STOP MOWING • Bring vehicle to a full st op. • Disengage clutch lever by moving lever to center position. • Turn key switch to “OFF” position.
SAFETY AND OPERATIONAL DECALS Replace decal immediately if damaged. Order by part number from Swisher Mower and Machine Co. Inc. OD33 – Speed Decal OD43 – Flying Debris Decal OD45 – Warning Deca.
FRAME ASSEMBLY FIGURE 1 Item No. Description Part # 1 Frame Weldment 5107S 2 Caster Weldment 5072 3 Tire & Wheel NO Tread 4.10x3.5-5 5057 4 Bearing, Flanged 3/4 ID CB58 5 3/4 Push Nut BLK Plastic NB-687 6 3/4ID X 1 1/4OD 10 GA.
DECK ASSEMBLY FIGURE 2 See Detail (Page 12) See Detail (Page 14) See Detail (Page 14) 14 5 14 8 4 12 14 18 2 17 9 16 14 15 1 4 13 6 19 34 10 11 26 7 20 Item # Description Part # Item # Description Par.
MOTOR BASE ASSEMBLY ENGINE SET-UP FIGURE 4 Item No. Description Part # 13 10 1/2 HP B&S Engine N/A 14 3/8-24 X 1 Engine Bolt Locktite NB-238N 15 Washer Belleville 699 16 1/4 X 1 Key Stock 9031 17 Engine Pulley- 5.5" 688 18 Engine Pulley Spacer Short 689S 19 Engine Pulley Spacer Long 689L 13 19 16 17 18 15 14 Figure 3 Item No.
BELT CONFIGURATION Figure 5 3752 (112 ” Belt) T 239 (39 ” Belt) 13.
1 2 2 14 Blade Driver Assy. 9058- 5.75 ” (Center Shaft) 9018- 4.25 ” (Outer Shafts) 10 7 11 8 4 10 15 16 5 6 3 9 13 12 Figure 6 BLADE DRIVER SET-UP 14 7 Outer Blade Driver Configuration Center Blade Driver Configuration Item No.
Console Assembly Wiring Diagram Figure 7 Figure 8 WHBP50 (Complete Wiring Harness) Item No. Description Part # 1 Console Weldment 5136TK 2 Clutch Cable Clevis 9023 3 T Handle 4463TK 4 Link for Console.
OWNER’S MANUAL MODEL NO. Each mower has its own model number. Each engine has its own model number. The model number for the mower will be found on the right hand side of the drive belt housing. The model number for the engine will be found on the top of the blower fan housing.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Swisher POL 10550 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Swisher POL 10550 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Swisher POL 10550 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Swisher POL 10550 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Swisher POL 10550, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Swisher POL 10550.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Swisher POL 10550. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Swisher POL 10550 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
