Manuale d’uso / di manutenzione del prodotto AOC-CGP-i2 del fabbricante Supermicro
Vai alla pagina of 19
User's Guide Revision 1.0 AOC-CGP-i2.
User's Guide Revision 1.0 Release Date: July 1 1, 2012 Unless you request and receive written permission from Super Micro Computer , Inc., you may not copy any part of this document. Information in this document is subject to change without notice.
Preface About this User's Guide This user's guide is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the AOC-CGP-i2 add-on card.
iv AOC-CGP-i2 Add-on Card User's Guide Conventions Used in the User's Guide Pay special attention to the following symbols for proper system installation and to prevent damage to the system .
v Preface Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (T echnical Support) Website: www .
T able of Contents Preface Chapter 1 Overview 1-1 Overview ......................................................................................................... 1-1 1-2 Key Features .................................................................
Chapter 1: Overview 1-1 Chapter 1 Overview 1-1 Overview Congratulations on purchasing your add-on card from an acknowledged leader in the industry . Supermicro products are designed with the utmost attention to detail to provide you with the highest standards in quality and performance.
1-2 AOC-CGP-i2 Add-on Card User's Guide • PCI-E 2.1 x4 (2.5GT/s or 5GT/s) interface • Dual RJ-45 connectors • Intel ® PROSet Utility for Windows ® Device Manager • Intel ® I/O Acceleration T echnology (I/O A T) • Power consumption: about 4W Ethernet Features • IEEE 802.
Chapter 1: Overview 1-3 • Flexible Port Partitioning: 32 Virtual Functions • PC-SIG SR-IOV implementation • IEEE 802.1q VLAN support • IEEE 802.
1-4 AOC-CGP-i2 Add-on Card User's Guide Cables Support • RJ-45 Category-5/5e up to 100m Operating Conditions • Operating temperature: 0°C to 55°C (32°F to 131°F) • Storage temperature: -40°C to 70°C (-40°F to 158°F) Physical Dimensions • Card PCB dimensions: 1 1.
Chapter 2: Hardware Components 2-1 Chapter 2 Hardware Components 2-1 Add-On Card Image and Layout The AOC-CGP-i2 Image The AOC-CGP-i2 Layout 2-2 Major Components The following major components are installed on the AOC-CGP-i2: 1. Intel I350 LAN Controller 2.
2-2 AOC-CGP-i2 Add-on Card User's Guide Activity LED GLAN Port LEDs T wo LAN ports (LAN 1~LAN 2) are located on the add-on card. Each Ethernet LAN port has two LEDs.
3-1 Chapter 3: Installation Chapter 3 Installation 3-1 Static-Sensitive Devices Electrostatic Discharge (ESD) can damage electronic com ponents. T o avoid dam - aging your add-on card, it is important to handle it very carefully . The following measures are generally sufcient to protect your equipment from ESD.
3-2 AOC-CGP-i2 Add-on Card User's Guide 3-2 Add-On Card Brackets The add-on card ships with a PCB bracket that is pre-installed at the factory . For 1U systems, an I/O bracket is also pre-installed on the card. For 2U systems, the IO bracket is bundled with the card and must be installed by the customer .
3-3 Chapter 3: Installation 3-4 Installing the Add-on Card Follow the steps below to install the add-on card into your system. 1. Remove the server cover and, if necessary , set aside any screws for later use. 2. Remove the add-on card slot cover . If the case requires a screw , place the screw aside for later use.
3-4 AOC-CGP-i2 Add-on Card User's Guide 3. Click on INST ALL DRIVERS AND SOFTWARE. 4. Follow the prompts to complete the installation. 3-6 Installing the Linux Operating System Follow the steps below to install the driver to a Linux system. Build a Binary RPM Package 1.
3-5 Chapter 3: Installation 4. Compile the driver module: # make install The binary will be installed as: /lib/modules/<KERNEL_VERSION>/kernel/drivers/net/igb/igb. [k]o The install location listed above is the default location. This location might not be correct for certain Linux distributions.
3-6 AOC-CGP-i2 Add-on Card User's Guide Notes.
(Disclaimer Continued) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Supermicro AOC-CGP-i2 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Supermicro AOC-CGP-i2 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Supermicro AOC-CGP-i2 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Supermicro AOC-CGP-i2 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Supermicro AOC-CGP-i2, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Supermicro AOC-CGP-i2.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Supermicro AOC-CGP-i2. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Supermicro AOC-CGP-i2 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
