Manuale d’uso / di manutenzione del prodotto TGR-401-230 del fabbricante Sunfire
Vai alla pagina of 68
Theater Grand Receiver TGR-401 TGR-401-230.
User's Manual 2 1. Read Instructions 2. Keep these Instructions 3. Heed all W arnings. 4. Follow all Instructions 5. Do not use this apparatus near water . 6. Clean only with a dry cloth. 7. Do not install near any heat sourc- es such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.
User's Manual 3 16. T o prevent electric shock , do not use this polarized plug with an exten- sion cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
User's Manual 4 Contents CHAPTER 1 The Appendix shows some ad- ditional information, including a troubleshooting guide, optional components, the warranty and service assistance details T o nd out more about this and other Sunre products, please visit our website: www .
User's Manual 5 CHAPTER 1 Processing: • Sonic Holography for enhanced imaging • Dolby Digital EX and ProLogic IIx • Dolby Headphone • DTS-ES, Neo:6, and DTS-96/24 • SourceDirect mode for DSP bypass V ideo: • Sunre-designed, 1080p HDMI v1.
User's Manual 6 CHAPTER 1 Y our TGR-401 should reach you in perfect condition. If you do notice any shipping damage, please contact your Sunre Dealer immediately . Gently lift out the unit and remove all the packing material and acces- sories.
User's Manual 7 CHAPTER 1 3 1 6 4 9 7 2 EXIT ENT +10 CH VOL MUTE PREV CH MENU INFO GUIDE MAIN FA V OFF ON PA GE SEL 5 8 0 Input, mode, and setup Input and menu select Power on/off Most features of the TGR-401 can be operated by the remote control’s TG401 section.
User's Manual 8 3 1 6 4 9 7 2 EXIT ENT +10 CH VOL MUTE PREV CH MENU INFO GUIDE MAIN FA V OFF ON P AGE SEL 5 8 0 Previous MODE Next MODE EXIT MENU CHAPTER 1 Quick Start Guide the knob to select the desired input.) 12. Play a source, such as a DVD, and bring up the volume to suit your taste.
User's Manual 9 CHAPTER 1 Manual Setup There are three main manual ad- justments that can be made using the SPEAKERS OSD menu: 1. The SPEAKER SIZE menu al- lows you to enter the crossover frequency of each speaker . Using bass management, any bass below the crossover frequency will be redirected to your subwoofer .
User's Manual 10 CHAPTER 1 Front Panel Features 1. Power This button turns the TGR-401 on (fully powered up) or into Standby mode (asleep, but can be turned on remotely). The blue LED above the power switch is on when the TGR-401 main zone is turned on.
User's Manual 1 1 Measurement microphone CHAPTER 1 12. IR Receiver Window This window should be clean and free from obstruction for the remote control to work correctly . 13. Main Select Any changes made after press- ing this button will affect the main zone.
User's Manual 12 CHAPTER 1 6. HDMI Use these to connect any HDMI components you may have in your system. Three are inputs, and one is an output to your HDMI- equipped TV . This supports 1080p and HDMIv1.3a sources. No on- screen-display or audio decoding inside the TGR-401 is available from the HDMI inputs.
User's Manual 13 CHAPTER 1 with its own surround decoder . Y ou can select this as an input from the front panel or remote control. The eight channels of analog audio will then pass into the TGR-401. Note: if you use HD-DVD or Blu- ray DVD players that have 7.
User's Manual 14 CHAPTER 1 Observe the following precautions when choosing a location for your TGR-401: Make sure the TGR-401 has good ventilation. Do not cover any of the ventilation slots, or t the receiver inside a sealed cabinet without good air ow .
User's Manual 15 CHAPTER 2 System Congurations T he f o l lo wi n g pa g es s h o w so m e ty p ic al c on ne c ti on s th a t yo u m ig ht ma ke i n yo u r i ns ta l l at io n . Th e y sh o w h ow th e i np ut s an d o ut pu t s o f t he TGR-401 a re c o nn ec t e d t o v ar io u s a ud i o an d v id e o c om p on en t s.
User's Manual 16 CHAPTER 2 Digital Audio and Component V ideo Connections (DVD) If your DVD and TV Monitor both have component video, they can be connected as shown, giving a superior picture. The digital output from the DVD player must be connected to the digital inputs of the TGR-401.
User's Manual 17 CHAPTER 2 CD and Antenna Connections AM Loop Antenna Position this to get the best reception before xing it in place. The supplied loop antenna has been carefully matched to the AM tuner . Larger Loop anten- nas may improve reception, provided that their inductive value is around 18 uH.
User's Manual 18 CHAPTER 2 T ape Player Connections The tape player ’s output can be connected to the analog audio inputs. The tape player can record the ana- log audio from the selected source. If you are playing a digital source, the tape player will receive a downmixed stereo analog signal for recording.
User's Manual 19 CHAPTER 2 8-Channel Analog Input Connections (Blu-ray or HD-DVD) The 8-CH input is really useful as an input for HD-DVD or Blu-ray DVD players capable of decoding Dolby T rue HD. If your DVD player has its own Dolby decoder you can connect it as shown.
User's Manual 20 CHAPTER 2 Front Panel Input Connections The front panel input section is the ideal place to make quick connec- tions to equipment such as gaming consoles or video cameras. There is also a connection for the microphone used in the auto-setup and auto-EQ procedures.
User's Manual 21 CHAPTER 2 Output Connections T O CENTER SPEAKER + + + + + + TO LEFT BACK SPEAKER (IF ZONE 2 AMP OFF) TO LEFT SURROUND1 SPEAKER TO LEFT 2 SPEAKER OR LEFT SURROUND2 TO LEFT MAIN SP.
User's Manual 22 CHAPTER 2 + TO RIGHT BACK SURROUND + TO LEFT BACK SURROUND (IF ZONE 2 AMP OFF) + + TO LEFT 2 SPEAKER TO LEFT SPEAKER + + TO RIGHT 2 SPEAKER TO RIGHT SPEAKER + TO LEFT SURROUND2 S.
User's Manual 23 Zone 2 can play stereo analog sources independently of the Main Zone, or play the same source. Zone 2 can only play a digital source if the Main Zone is playing the same source. If you want the TGR-401 speaker- level outputs to run your Zone 2 speakers, under the OSD Binding Post menu, set "POWERED Z2" to ON.
User's Manual 24 Satellite outdoor Antenna Connection carries audio and tuner control data Power supply T uner SIRIUS SC-H1P Pro Install Kit CHAPTER 2 Optional Connections SIRIUS Satellite Radio SIRIUS Satellite Radio offers over 120 channels of the best entertain- ment and completely commercial-free music.
User's Manual 25 3 1 6 4 9 7 2 EXIT ENT +10 CH V OL MUTE PREV CH MENU INFO GUIDE MAIN F A V OFF ON P AGE SEL 5 8 0 CHAPTER 3 Remote Control The TGR-401 remote control is many remotes in one. There are ten device buttons, ve on either side of the display , and each allows the remote to operate one piece of equip- ment.
User's Manual 26 CHAPTER 3 1. Press the remote's MAIN button to make sure the display is on the main display menu. 2. Press the TG401 device button to set the remote to operate your TGR- 401. The display changes to show the TGR-401 input selections.
User's Manual 27 CHAPTER 3 Y ou must enter the SETUP mode to program the remote control for the other components in your system, and to customize it for your conve- nience. There is only one way to enter the SETUP mode: Hold down both the MAIN and ENT buttons for a few seconds until SETUP appears in the display .
User's Manual 28 CHAPTER 3 PUNCH This mode allows you to set up the volume, channel up/down and trans- port buttons so they will work for your main devices, no matter which device the remote is set for . For example, the volume buttons can operate the TV , even if the remote is set to VCR.
User's Manual 29 CHAPTER 3 Remote Setup continued 9. T ry out the Sunre remote and see if the learned buttons will success- fully operate your equipment. Y ou may nd that some commands cannot be learned, because some are non-conventional, or too long or too short.
User's Manual 30 CHAPTER 3 CLONE This feature allows you to easily copy all of the commands and labels from one Sunre remote (of the same type) to another . 1. Set both remotes on a at surface, with their IR windows pointing towards each other , about 1 or 2 inches apart.
User's Manual 31 CHAPTER 4 On Screen Display (OSD) V ideo Connections The On Screen Display (OSD) is available at the composite video, S-video, or component video MON outputs. Make sure that your TV monitor's video input is connected correctly to one of these outputs.
User's Manual 32 CHAPTER 4 Navigation Use the remote's navigation pad left, right, up and down buttons to navigate through the menus. An arrow after text ( ) on the screen, shows there is more infor- mation on another page. The back arrow ( ) shows that you can return to the previous page.
User's Manual 33 See next page CHAPTER 4 OSD Menus: T rims, T one, Modes, Presets, Setup (Input) TONE CONTROLS CHOICES BASS 0 +14 TO -14 TREBLE 0 +14 TO -14 INPUTS DEF AUL T NAME 1 HD/BD 2 SA T 3 DVR 4 MP3 5 DVD 6 CABLE 7 VCR 8 CD 9 HD/BD-7.
User's Manual 34 CHAPTER 4 INPUT 9 INPUT 10 INPUT 1 1 INPUT 12 CHOICES ZONES M/Z2 M/Z2 M/Z2 M/Z2 OFF , MAIN, ZONE 2, M/Z2 NAME HD/BD-7.1 SIRIUS (FIXED) TUNER (FIXED) FRONT (FIXED) (UP TO 10 LETTER, NUMS AND SPECIAL CHARACTERS GAIN TRIM 0.0 DB 0.0 DB 0.
User's Manual 35 See next page CHAPTER 4 OSD Menus: Setup continued MAIN MENU TRIMS TONE CONTROLS MODES PRESETS SETUP SETUP CHOICES INPUTS SPEAKERS VIDEO MAIN ZONE ZONE 2 CONTROL DIGIT AL OUT THR.
User's Manual 36 CHAPTER 4 MANUAL EQ FREQ-HZ LEVEL 20 -00 31 -00 63 -00 125 -00 RESET T O FLA T OSD Menus: Setup/Speakers/EQ MANUAL EQ P AIRS FRONT CENTER SURROUND BACK SURR SUB MANUAL EQ CHOICES.
User's Manual 37 CHAPTER 5 Input settings Using the TGR-401 DEF AUL T CHOICES NOTES ZONES M/Z2 OFF , MAIN, ZONE 2, M/Z2 Shows which Zones the input can play in NAME HD/BD (UP TO 10 LETTER, NUMS AND SPECIAL CHARACTERS) Change the name of the input to suit your actual compo- nents GAIN TRIM 0.
User's Manual 38 CHAPTER 5 The TGR-401 has a bass man- agement system that allows you to choose whether your speakers will play the full frequency range, or if the bass will be redirected to the subwoofer .
User's Manual 39 CHAPTER 5 Manual Setup The following On Screen Display (OSD) menus are used to enter and make three main adjustments: • Speaker Size • Level Calibration • Speaker Distance .
User's Manual Measurement microphone (supplied) 40 CHAPTER 5 The automatic setup procedure uses the microphone to measure and evaluate your system. After the measurements are complete, the levels, crossover frequency , and delay times of the speakers in your system are automatically adjusted for the best performance.
User's Manual 41 CHAPTER 5 Auto EQ The automatic EQ procedure uses the microphone to measure and evaluate your system. This takes into account room effects, and automati- cally attens out the response. After the measurements are complete, the EQ of your system is adjusted.
User's Manual 42 CHAPTER 5 For 2 channel input sources, you can choose from the following modes: STEREO MONO P ARTY DOLBY PLIIX MUSIC DOLBY PLIIX MOVIE DOLBY PLIIX GAME DOLBY PLIIX MA TRIX DTS NE.
User's Manual 43 CHAPTER 5 For multi-channel sources, the TGR-401 will automatically select the correct mode from one of the follow- ing: DOLBY DIGIT AL DOLBY DIGIT AL EX DOLBY DIGIT AL PLIIX MUS.
User's Manual 44 CHAPTER 5 DTS DIGIT AL SURROUND This mode is available if the TGR-401 automatically detects that a DTS encoded source is present at one of it’s digital inputs. Look for the DTS Logo on DVDs, LaserDiscs, CDs and other sources. Make sure that you set your player to output DTS bitstreams.
User's Manual 45 CHAPTER 5 Sonic Holography is a unique process which enhances the three- dimensional effects and realism of stereo sound. This is from a design based on Bob Carver's legendary (and much sought after) Carver C-9 Sonic Holography Generator .
User's Manual 46 CHAPTER 5 The supplied AM and FM antennas must be connected to the TGR-401 antenna terminals, or no stations will be tuned. The internal AM and FM tuners are selected either by pressing Input and rotating the manual selector on the front panel, or by touching the AM or FM buttons in the remote’s TGR-401 page 2.
User's Manual 47 CHAPTER 5 Recording Recording to a T ape Player Input signals from an audio source playing in the TGR-401 can be re- corded using the left and right audio outputs. The tape player will receive a straight copy of the analog source signal going in, unaffected by the volume, tone or any surround modes.
User's Manual 48 CHAPTER 5 Zone 2 Operation If you have a pair of speakers in a second room or area (Zone 2), they can play a stereo source independent of whatever is playing in the Home Theater room (Main Zone). Y ou can also play the same source as selected in the Main Zone.
User's Manual 49 CHAPTER 5 T rigger Outputs Three trigger outputs supply +12 VDC whenever they are turned on. These can be used to turn on external Sunre power ampliers equipped with a 12 V trigger input, or to deploy video screens for example.
User's Manual 50 APPENDIX Speaker Placement The Front Speakers Y ou should closely follow the placement recommendations of your speaker manufacturer , with the addi- tion of the following points: The left and right front speakers should be positioned so that your TV is exactly centered between them.
User's Manual 51 APPENDIX In some systems, two center speak- ers are used; one on either side of the TV . As they are in mono, the result is a sound image that is positioned exactly at the screen center .
User's Manual 52 APPENDIX The RS-232 Port The TGR-401 has a rear panel RS-232 Serial communication port. This allows the FLASH memory to be upgraded to the latest software by connecting to a PC. The TGR-401 software may be updated to rene operational details and to include new features.
User's Manual 53 APPENDIX T roubleshooting Guide The Sunre TGR-401 is expertly designed and built to provide years of trouble-free performance. Most prob- lems that occur can usually be solved by checking your setup or making sure that the audio and video compo- nents connected to the TGR-401 are on and fully operational.
User's Manual 54 APPENDIX No Dolby Digital, DTS playback • See page 43 • Make sure your player's digital output is set to BITSTREAM for Dolby Digital or DTS.
User's Manual 55 APPENDIX Updating rmware problems • See page 52 • If you have a Palm Pilot™ or simi- lar device with “HotSync™” or its equivalent, you may need to dis- able this software before proceed- ing.
56 User's Manual APPENDIX Remote Control Codes (see remote control P-Pro on page 27) TVS, PLASMAS, PROJEC- TORS, MONIT ORS ADMIRAL 072 081 161 160 ADVENT 247 388 AKAI 197 146 248 404 405 458 AMAR.
57 User's Manual APPENDIX DVD RECORDERS CINEVISION 219 CYBERHOME 271 GA TEW A Y 175 GO VIDEO 218 219 220 221 222 JVC 203 257 ILO 268 KISS 279 LITEON 265 P ANASONIC 139 259 PHILIPS 176 277 PIONEER.
58 User's Manual APPENDIX HTS 122 HUGHES 068 154 161 162 165 166 HYTEK 053 HYUNDAI 149 ICR 023 JANIEL 060 147 JERROLD 148 JVC 122 KA THREIN 108 LEGEND 057 LG 170 LUXOR 144 062 MACOM 010 059 063 0.
User's Manual 59 APPENDIX Specications Manufactured under license under U.S. Patent Numbers: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,003,467; 7,212,872 & other U.
User's Manual 60 APPENDIX Default Input T able SOURCE NAME ANALOG DIGIT AL COMPOSITE S-VIDEO COMPONENT HDMI 1 HD/BD 1 COAX1 1 1 1 1 2 SA T 2 COAX2 2 2 2 2 3 DVR 3 COAX3 3 3 3 3 4 MP3 4 COAX4 4 4 N N 5 DVD 1 OPT1 1 1 1 1 6 CABLE 2 OPT2 2 2 2 2 7 VCR 3 OPT3 3 3 3 3 8 CD 4 OPT4 4 4 N N 9 HD/BD 7.
User's Manual 61 APPENDIX Optional VIA!migo iPod Dock 1. Remote Input This connection is not required for connecting to the TGR-401 (see #5 below). It allows you to send remote control commands from 3rd party controllers to the VIA!migo dock via the rear panel.
User's Manual 62 APPENDIX Using the VIA!migo The following details show how to use the VIA!migo to play your iPod through the TGR-401 1. Press the remote's MAIN button to make sure its display is on main page 1. 2. Press the TG401 device button to set the remote to operate your TGR-401.
User's Manual 63 APPENDIX The following details assume that the SIRIUS tuner is plugged in, powered up, and the antenna is hooked up and mounted outdoors. (An instruction manual comes with the tuner kit.) If you have not already done so, purchase a subscription plan from SIRIUS.
User's Manual 64 APPENDIX SIRIUS T uner Operating Instructions Activation: 1. Select the SIRIUS Input using the front input button and rotating the manual selector knob, or with the remote control. 2. Y ou will need your SIRIUS Satel- lite Radio ID which you can get by tuning to Channel 0.
User's Manual 65 APPENDIX General tuning and use: T une UP/DOWN to any channel by being in Channel Mode and press- ing NA V UP or NA V DOWN. Press- ing NA V SEL toggles back and forth between Channel Mode and Category Mode, and will show which tuning mode you are in.
User's Manual 66 APPENDIX Features • Plug-and-play . Right out of the box, the Olé-2SF controls Zone 2 • Simple SunT ools™ PC program- ming for customization • Sunre Optimized™ grap.
User's Manual 67 APPENDIX Sunre Limited W arranty Sunre, a division of Elan Home Systems, LLC, is proud of its products which have been built with care using advanced technology and premium component parts. Y our unit has been crafted to perform properly for many years.
Theater Grand Receiver TGR-401 TGR-401-230 Manual part number: 913-141-00 Rev A2.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sunfire TGR-401-230 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sunfire TGR-401-230 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sunfire TGR-401-230 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sunfire TGR-401-230 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sunfire TGR-401-230, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sunfire TGR-401-230.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sunfire TGR-401-230. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sunfire TGR-401-230 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
