Manuale d’uso / di manutenzione del prodotto SRT 7000 del fabbricante Strong
Vai alla pagina of 25
User Manual Digital High Definition Satellite Receiver SRT 7000 Picture similar.
.
.
1 PART 1 • English English T ABLE OF CONTENTS 1.0 INSTRUCTION 2 1.1 Safety Instructions 2 1.2 Storage 2 1.3 Equipment Set-up 2 1.4 Accessories 3 1.5 Usage of external USB devices 3 2.0 YOUR RECEIVER 3 2.1 PIN code default: 0000 3 2.2 F ront panel 3 2.
2 PART 1 • English 1.0 INSTRUCTION 1.1 Safety Instructions DO NOT INST ALL YOUR RECEIVER: In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots.
3 PART 1 • English English This manual provides complete instructions for installing and using this receiver . The following symbols will serve as follow . WARNING Indicates warning information. TIPS Indicates any other additional important or helpful information.
4 PART 1 • English 4. VIDEO (RCA) T o connect to the RCA video input of your TV or VCR using an RCA cable 5. AUDIO (L/R) T o connect to the audio input of your HIFI or television 6. TV SCART T o connect to TV using a SCART cable 7. VCR SCART T o connect to a Video or DVD recorder 8.
5 PART 1 • English English 25. u /PLAY Starts/resumes the playback. 26. 2 /PAUSE Starts/resumes timeshift when USB device is connected. F reezes/ resumes the playback of Multimedia files. 27. 3 /STOP Stops playback/timeshift/record 28. REPEA T Selects different repeat modes during playback 29.
6 PART 1 • English 4.0 FIRST TIME INST ALLA TION After all connections have been made properly , switch on TV and make sure the receiver is connected to the main power . Then switch on the receiver . If you are using the receiver for the first time or restored to factory default, the First Installation menu will appear on your TV screen.
7 PART 1 • English English 6.0 OPERA TION In viewing mode, several features are available to make watching TV a true pleasure. This paragraph describes these features. Please also read chapter 7 . 0 to get familiar with the menu of your new receiver .
8 PART 1 • English 6.4 T eletext Y our receiver includes a fully featured T eletext. T o access T eletext, press the TTX button in viewing mode and use the 0 ~ 9 or pq buttons to select the number of the page you wish to see. Subpages (once loaded and if available) can be selected with the tu buttons.
9 PART 1 • English English T o stop a recording press STOP button on remote control. Another way of doing recordings is to use the Timer – please refer to 7.4.1 Timer of this manual. Average record size (values are approximately , depend from bit rate of actual broadcast): MPEG2 SD channel – 1 hour take about 2.
10 PART 1 • English Disable favourite TV or radio program Repeat the step 1 described above and select Disable in the F avourite T ype window . View favourite program 1. In normal viewing mode (no menu mode) press the FA VOURITE to display a list of favourite programs.
11 PART 1 • English English 7.1.3 Sort Here you can sort your channels in the following orders: Default Sort the channels in the original order By Service Name Sort the channels in alphabetical order (A-Z) By F requency Sort the channels in frequency order (Low-High) By Encrypt Sort the channels from free to scrambled 7.
12 PART 1 • English 7.3 Channel Search T o access the menu press MENU and select Channel Search . It contains two options: Installation and DB ( Data Base ) Management . Select an option and press OK to enter it. Press EXIT to exit the menu. 7.3.1 Installation 7.
13 PART 1 • English English After configuring press OK or BLUE again to start scanning with the selected settings. Y our receiver will now perform an automatic channel search with scan progress shown on screen. During channel search you can skip T ransponders by pressing MENU button, or quit the scan process by EXIT .
14 PART 1 • English 7.3.2 DB Management (save your channel settings on an USB-Storage-Device and load it anytime back) This menu allows you to up/download the channel Data Base of your receiver from/to an USB-Device.
15 PART 1 • English English 7.5 Option Press MENU and select Option . In this menu you can adjust the OSD Language , Subtitle Language , Audio Language , Digital Audio mode and Banner Time . Select an option and press tu to adjust the setting. Press EXIT to exit the menu.
16 PART 1 • English Software update In Main Menu select Software Update and press OK or u to select. There are two software update options available: SW update By OT A The OT A (Over the Air) function allows you to search for software updates available on satellite.
17 PART 1 • English English 7.7 USB Press MENU and select USB . The menu provides Multimedia feature to playback Music , Photo , Movie and with the receiver Recorded files.
18 PART 1 • English Photo Y our receiver allows you to watch a slide show with all photo’s available in the chosen folder . T o use the slide show choose a folder with photo files. Press PLA Y ( u ) to start and STOP ( 3 ) or EXIT to stop the slide show .
19 PART 1 • English English 7.7.2 Photo Configure Slide Time: Y ou can adjust slide show interval to 1~8 seconds. Slide Mode: Y ou can select one of the 60 slide show effects or Random (mixed effects). Aspect Ratio: Keep - displays the picture as its original aspect Discard - displays the picture in full screen mode.
20 PART 1 • English 8.0 TROUBLESHOOTING There may be various reasons for abnormal operation of the receiver . Please check the receiver according to the procedures shown below . If the receiver does not work properly after checking it, please contact your local Serviceline or STRONG dealer .
21 PART 1 • English English 9.0 SPECIFICA TIONS Demodulator Demodulation: QPSK, 8PSK Input symbol rate: DVB-S QPSK: 1 ~ 45 Ms/s DVB-S2 8PSK/QPSK: 10~30 Ms/s FEC decoder: Auto, 1/2, 2/3, 3/4, 5/6, 7/.
22 PART 1 • English General Data Input voltage range: 100 – 240 V AC 50/60 Hz Power consumption: max. 18 W , typ. 8.5 W (without external storage device) Power consumption in standby: max.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Strong SRT 7000 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Strong SRT 7000 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Strong SRT 7000 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Strong SRT 7000 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Strong SRT 7000, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Strong SRT 7000.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Strong SRT 7000. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Strong SRT 7000 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
