Manuale d’uso / di manutenzione del prodotto AL35 del fabbricante Stanley Black & Decker
Vai alla pagina of 20
© 2014 Stanley Black & Decker , Inc. New Britain, CT 06053 U.S.A. 16798 8/2014 V er . 6 USER MANUAL Safety , Operation and Maintenance AL35 HYDRAULIC AL TERNA T OR.
.
AL35 User Manual ◄ 3 SERVICING: This manual contains safety , operation, and routine maintenance instructions. Stanley Hydraulic T ools recommends that servicing of hydraulic tools, other than routine maintenance, must be performed by an authorized and certied dealer .
4 ► AL35 User Manual Always observe safety symbols. They are included for your safety and for the protection of the tool. LOCAL SAFETY REGULA TIONS Enter any local safety regulations here. Keep these instructions in an area accessible to the operator and mainte- nance personnel.
AL35 User Manual ◄ 5 T ool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool and hose. These safety precautions are given for your safety . Re- view them carefully before operating the tool and before performing general maintenance or repairs.
6 ► AL35 User Manual • Do not start the alternator with electrical loads con- nected and in a power “ON” state. • Ensure that the alternator is at operating speed/volt- age before connecting an electrical load. • Only use hydraulic hose labeled and certied as non-conductive when using hydraulic tools on or near electrical lines.
AL35 User Manual ◄ 7 SAFETY T AG P/N 15875 (Shown smaller then actual size) DANGER DANGER READ OPERA TION MANUAL AND SAFETY INSTRUCTIONS FOR THIS TOOL BEFORE USING IT . USE ONL Y P ARTS AND REP AIR PROCEDURES APPROVED BY ST ANLEY AND DESCRIBED IN THE OPERA TION MANUAL.
8 ► AL35 User Manual The rated working pressure of the hydraulic hose must be equal to or higher than the relief valve setting on the hy- draulic system. There are three types of hydraulic hose that meet this requirement and are authorized for use with Stanley Hydraulic T ools.
AL35 User Manual ◄ 9 Oil Flow Hose Lengths Inside Diameter USE ( Press/Return) Min. Working Pressure GPM LPM FEET METERS INCH MM PSI BAR Certied Non-Conductive Hose - Fiber Braid - for Utility Bu.
10 ► AL35 User Manual Flow Range Nominal Operating Pressure (at the power supply outlet) System relief valve setting (at the power supply outlet) Maximum back pressure (at tool end of the return hose) Measured at a max. uid viscosity of: (at min.
AL35 User Manual ◄ 1 1 OPERA TION PROCEDURES 1. Observe all safety precautions. 2. CA UTION Do not connect or otherwise apply power to an electrical load until the alternator has come up to speed. Move the hydraulic circuit control to the “ON” posi- tion.
12 ► AL35 User Manual PREVENT A TIVE MAINTENANCE SCHEDULE IN DIRTY OR MOIST ENVIRONMENTS 90 DA Y INTERV ALS If the unit is operated or stored in a dirty , moist, or salt moisture environment, the electrical contacts, rotor and stator should be inspected and cleaned every 90 days or more frequently as deemed necessary .
AL35 User Manual ◄ 13 • Make sure all couplers are wiped clean before con- nection. • The hydraulic circuit control valve must be in the “OFF” position when coupling or uncoupling hydrau- lic tools. Failure to do so may result in damage to the quick couplers and cause overheating of the hy- draulic system.
14 ► AL35 User Manual PROBLEM CAUSE REMEDY T ool does not run. Power unit not functioning. Check power unit for power ow and pressure (7-9 gpm/26-34 lpm, 2000 psi/140 bar . Couplers or hoses blocked. Remove restriction. Hyrevz motor failure. Inspect and repair .
AL35 User Manual ◄ 15 The AL35 is a hydraulic motor powered electrical alternator , designed to provide power for lights, small power tools, and small appliances. It produces 3500 watts of power at a nominal 120/240 volts AC single phase at 60 Hz frequency .
16 ► AL35 User Manual 2 4 3 2 5 21 22 16 1 7 8 9 3 14 13 12 6 15 17 18 19 20 22 21 23 25 24 27 40 36 37 35 42 39 21 22 20 32 43 31 10 28 30 26 41 38 AL35 ALTERNATOR August 1998 AL35 P ARTS ILLUSTRA .
AL35 User Manual ◄ 17 ITEM P ART NO. QTY DESCRIPTION 1 15100 1 VOL TMETER 2 COM* 4 PHILLIPS HEAD MACHINE SCREW 3 COM* 4 W ASHER 4 1 RECEPT ACLE P ANEL 5 15101 1 RECEPT ACLE, 30 A, 120 V 6 15103 1 RE.
18 ► AL35 User Manual ITEM P ART NO. QTY DESCRIPTION 1 00120 8 CAPSCREW, 1/4‑20 × 2-1/4 HSH 2 07386 1 GEAR HOUSING ASSEMBL Y (INCLUDES ITEMS 3 & 4) 3 00713 2 DOWEL PIN 4 06316 4 BUSHING 5 001.
AL35 User Manual ◄ 19 CAPACITOR TO FRAME 6 GND 5 GOLD GOLD GOLD SILVER 4 3 2 2 1 1 1 2 3 4 5 6 7 8 9 14 AWG BLK(P) 1 14 AWG BLK(P) 2 14 AWG WHT(P) 3 14 AWG WHT(P) 4 14 AWG WHT(P) 5 14 AWG BLK(P) 6 1.
Stanley Hydraulic T ools 3810 SE Naef Road Milwaukie, Oregon 97267-5698 USA (503) 659-5660 / Fax (503) 652-1780 www .stanleyhydraulics.com.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Stanley Black & Decker AL35 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Stanley Black & Decker AL35 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Stanley Black & Decker AL35 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Stanley Black & Decker AL35 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Stanley Black & Decker AL35, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Stanley Black & Decker AL35.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Stanley Black & Decker AL35. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Stanley Black & Decker AL35 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
