Manuale d’uso / di manutenzione del prodotto M88724C1 del fabbricante Spalding
Vai alla pagina of 20
1 08/06 ID# M88724C1 High End Residential In-Ground Basketball System Owners Manual Customer Service Center • N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A. Toll-Free Customer Service Number for U.S: 1-800-334-9111 Spalding Internet Address: http://www.
2 ID# M88724C1 08/06 Owner must ensure that all players know and follow these rules for safe operation of the system. W ARNING • DO NOT HANG on the rim or any part of the system including backboard, support braces or net.
Item Qty. Part No. Description 1 1 968880 Pole 2 1 908266 Tube, 8x8, Ground Anchor, Black 3 1 Rim Assembly 4 1 Net 5 4 203017 Nut, Hex, 3/8-16 6 4 203300 Washer, 3/8 Locking, .380 I.D., .63 O.D. 7 4 200512 Bolt, Hex, 3/8-16 x 3.5” Long 8 1 204922 Pin, Hitch 9 1 204923 Pin, Cotter, #8 10 3 204993 Rebar, .
4 ID# M88724C1 08/06 Item #5 (4) Item #34 (4) Item #24 (9) Item #7 (4) Item #28 (3) Item #20 (1) Item #23 (1)* Item #25 (8) Item #26 (1) Item #22 (9)* Item #8 (1) Item #9 (1) HARDW ARE IDENTIFIER (NUT.
5 08/06 ID# M88724C1 Ensure ground is level with playing surface, then dig pole hole. CONTACT UTILITIES BEFORE DIGGING. W ARNING! 24" (61 cm) 48" (121.9 cm) PLAYING SURFACE GROUND SURFACE 24" (61 cm) 48" (121.9 cm) 1. 2. Install nut s (25) onto the ground tube bolts as shown.
6 ID# M88724C1 08/06 1" (2.54 cm) SIDE VIEW DRAINAGE HILL PLAYING SURFACE Fill hole with concrete. T amp down concrete to release air pockets and build drainage hill.
7 08/06 ID# M88724C1 IMPORT ANT!: W AIT A MINIMUM OF 72 HOURS BEFORE GOING ON T O NEXT STEP . CONCRETE MUST CURE. ALLOW ADDITIONAL TIME FOR COLD, WET OR HUMID WEA THER. IMPORT ANT! Check leveling of mounting plate several times with carpenter’s level while concrete is curing.
8 ID# M88724C1 08/06 Insert bushings (19) into areas shown. 19 19 19 1 13 19 19 17 18 19 19 19 19 19 19 19 19 19 19 6. 19 19 19 19 19.
9 08/06 ID# M88724C1 Rest top of pole (1) on a piece of scrap wood (not included) and line up holes in pole to holes in mounting plate (2) as shown. 7A. 22 28 1 PLA YING SURF ACE 2 Insert bolt (28) through holes in plate and pole and secure with nut (22).
10 ID# M88724C1 08/06 THREE CAPABLE ADULTS REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. W ARNING! 8. TWO people are required to lift pole into position so that the threaded assembly rod (14) can be installed and secured by the THIRD person.
11 08/06 ID# M88724C1 While still in forward position, attach both upper and lower yokes (17 & 18) to pole as shown. 9. 22 21 28 21 17 18 THREE CAPABLE ADULTS REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
12 ID# M88724C1 08/06 Attach elevator adjustment (12) to lower yoke (18). 10. 22 12 19 21 20 18 21 19 THREE CAPABLE ADULTS REQUIRED FOR THIS PROCEDURE.
13 08/06 ID# M88724C1 Attach elevator adjustment (12) to pole bracket. 11 . THREE CAPABLE ADULTS REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
14 ID# M88724C1 08/06 Attach backboard (13) to upper and lower yokes (18 & 17). First attach board (13) to upper yoke (17), using TWO people to hold the board and ONE person to attach hardware (FIG . A). Use hardware as shown in FIG . B. 12. A. FIG.
15 08/06 ID# M88724C1 13. 5 7 Refer T o Instructions Included With Rim Hardware For Rim Assembly . Before starting rim assembly , tighten nut (26) until it is positioned 6-3/4” from the end of the rod (14) as shown (Figure A). Remove rim cover (16), attach rim assembly (3) to backboard (13) and reatt ach rim cover (16).
16 ID# M88724C1 08/06 14. A. B. 15. Apply height indicator labels (32 & 31) to height indicators (30). 2. 4. 3. 1. Install net (4) to rim as shown. 7 8 9 10 7 8 9 10 7 8 9 10 7 8 9 10 7 8 9 10 IMPORT ANT! NOTE ORIENT A TION OF HEIGHT INDICA TORS: 10’ MARK SHOULD F ACE A W A Y FROM BACKBOARD.
17 08/06 ID# M88724C1 7 PLA YING SURF A CE WAR NING F AILURE T O FOLLO W THESE W ARNINGS MA Y RESUL T IN SERIOUS INJUR Y AND/OR PR OPER TY D AMA GE. Owner m ust ensure that all pla y er s kno w and f ollow these rules f or saf e operation of the system.
18 ID# M88724C1 08/06 17. After pole has been secured to anchor plate (2) loosen nut (26), remove cotter pin (9), and pull out pin (8). This will allow the removal of the threaded assembly rod (14) which is no longer necessary for the remainder of the assembly and installation of system.
19 08/06 ID# M88724C1 12 19. Apply height adjust ment label (1 1). Adjust system by turning crank until desired height is reached per height indicator (30). 11 30 10 feet (3.05 m) READ AND UNDERSTAND WARNING & HEIGHT ADJUSTMENT LABELS BEFORE USING THIS UNIT.
20 ID# M88724C1 08/06 LIMITED LIFETIME W ARRANT Y Subject to proper installation and normal use, S palding ® warrants, subject to limit ations below , to the original retail purchaser all structural .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Spalding M88724C1 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Spalding M88724C1 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Spalding M88724C1 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Spalding M88724C1 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Spalding M88724C1, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Spalding M88724C1.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Spalding M88724C1. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Spalding M88724C1 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
