Manuale d’uso / di manutenzione del prodotto SRP-X700P del fabbricante Sony
Vai alla pagina of 32
SRP-X700P 2003 Sony Corporation SRP-X700P Manager User Control Panel Operating Instructions (Control Software Manual Ver. 1.3) Before using the software, please read this manual and the Operating Instructions of the Digital Powered Mixer thoroughly and retain it for future reference.
2 T able of Contents Features ........................................................................................................................... 3 Precautions ...................................................................................
3 Featur es The CD-R OM supplied with the SRP-X700P contains two applications and the dri ver software. By installing the software in a personal computer running W indows, you can set the parameters of the SRP-X700P and can perform from the PC the basic operations of the SRP-X700P .
4 Installation The dedicated USB driver softwar e is necessary to connect the SRP-X700P Manager and User Contr ol Panel to the SRP-X700P . Installing the Dedicated USB Driver Softwar e • The dedicated USB dri ver software is contained in the CD-R OM supplied with the SRP-X700P .
5 Installing the User Contr ol Panel 1 Insert the supplied CD-R OM into the CD-ROM dri ve of the personal computer . Open the User Control Panel folder . Double-click the Setup icon. 2 The User Control Panel installation screen appears. 3 When the screen [W elcome to the User Control Panel installation program] appears, click OK.
6 The SRP-X700P Manager enables you to set all par ameters of the SRP-X700P . Starting the SRP-X700P Manager If the SRP-X700P Manager is started after connecting the SRP-X700P to the personal computer with a USB cable, the present setup of the SRP-X700P is read.
7 Edit menu (Displayed only on the INPUT and OUTPUT screens) Copy: Copies the parameters. Y ou can copy the parameters of the desired channel to the specified channel.
8 Names and Functions of Contr ols on Scr een 1.1 BLOCK Scr een The BLOCK screen displays the setup status and the signal le vel according to the internal blocks in the SRP-X700P . If you click a button, the screen jumps to the related setup scr een. Y ou can select ON/OFF and set parameters on each screen.
9 1.2 INPUT Scr een Y ou can set parameters of the input block of the SRP-X700P from the INPUT scr een. 1.2.1 INPUT OVERVIEW Scr een This screen corr esponds to the input module of the audio mixer . This screen enables you to set the f ollowing. 1 INPUT index Displays the index that is input on the BLOCK screen.
10 Names and Functions of Contr ols on Scr een qd GAIN LIMIT and qf O VER GAIN indicators The sending le vel from input section is the sum of the qh INPUT fader and the input fader of the SRP-X700P .
11 1.2.2 INPUT EQ Scr een Y ou can set the low-cut filter , feedback reducer and parametric equalizer of the SRP-X700P input block from the INPUT EQ scr een. 1 2 3 4 5 6 7 8 9 0 1 Channel select button Selects the INPUT channel that you want to set. The selected button lights in yello w .
12 Parametric Equalizer Block The MIC1/WL1, MIC2/WL2, MIC3, MIC4, MIC5/LINE1 and MIC6/LINE2 channels hav e a 3-band parametric equalizer , and the LINE3 and LINE4 channels hav e a 2-band parametric equalizer . Clicking the v or V button changes the follo wing parameters of each band.
13 1.3 ROUTING Scr een On this screen, y ou can set to which output channel the input signal is to be output. 1 4 3 2 5 AUTOMA TIC MIXER Block The A UTOMA TIC MIXER block of the SRP-X700P consists of the input gate, input compressor , and output limiter .
14 Names and Functions of Contr ols on Scr een 1 GA TE OPEN indicator Lights in green when the input gate is opened. 2 Compressor gate characteristics graph Displays the characteristics of the compressor and gate for the microphone input.
15 9 Limiter characteristics graph Displays the characteristics of the output limiter . Y ou can control the threshold of the output limiter by dragging the marker on the graph with the mouse. The reference lev el is 0 dB. 0 Output channel select button Y ou can select the output channel for which you want to enable the A UTOMA TIC MIXER.
16 Names and Functions of Contr ols on Scr een 1.4 OUTPUT Scr een Y ou can set the parameters of the output block of the SRP-X700P from the OUTPUT scr een. 1.4.1 OUTPUT OVERVIEW Scr een This screen corr esponds to the output module of the audio mixer .
17 qf OUTPUT fader Y ou can adjust the OUTPUT fader by dragging the fader portion. The yellow mark er displayed on the side of the fader indicates the fader position that is the addition of the OUTPUT fader setup.
18 Names and Functions of Contr ols on Scr een 1.4.2 OUTPUT EQ Scr een Y ou can set the equalizer of the SRP-X700P output block from the OUTPUT EQ scr een. 1 Channel select button Selects the OUTPUT channel that you want to set. The selected button lights in yello w .
19 1.5 REMOTE Scr een Y ou can establish various setups of the remote terminal fr om the REMO TE screen. P ARALLEL I/O Block 1 P ARALLEL INPUT indicator Displays the status of the REMO TE P ARALLEL terminal. The P ARALLEL INPUT indicator lights in green when the input terminal is ON (0.
20 Names and Functions of Contr ols on Scr een PROJECTOR CONTROL Block Y ou can establish various setups to control a projector , refer to “ How to Control the Display from the SRP-X700P ” of the SRP- X700P Operating Instruction.
21 P arameters in the P ARALLEL INPUT FUNCTION setup bo x Parameter ————— A: Selects A. to F: Selects F . OFF: Enters the off state. Mic1: Selects Mic1. to Mic4: Selects Mic4. Mic5Line1: Selects Mic5/Line1. Mic6Line2: Selects Mic6/Line2. Line3: Selects Line3.
22 USER DEFINE Scr een Use this scr een to set the communication protocol when USER DEFINE is selected in the PR OJECTOR PR O TOCOL setup box. When USER DEFINE is selected, the projector is connected to the PR OJECTOR CONTR OL RS-232C terminal.
23 Port setup Sets the communication conditions between the SRP-X700P and projectors. 4 BITS PER SECOND setup box Sets the baud rate. Select the desired speed to 9600, 19200, or 38400 bps depending on the baud rate of the projector . 4 5 5 P ARITY BIT setup box Sets the parity bit.
24 INPUT SELECT command setup Sets the command to select the input terminal of the projector in accordance with the SRP-X700P LINE4 SELECT selection. It also sets the wait time after the command has been sent. The SRP-X700P has built-in independent switchers for the respecti ve video signal systems.
25 Connectable projectors Projectors meeting the following specif ications can be connected. • Equipped with RS-232C remote terminal • The RS-232C remote terminal must support the follo wing specifications.
26 Connection to pr ojector For details of the method of connecting to a projector , see “ System example when operating the SRP-X700P with the def ault setting when shipped from the factory ” of the SRP-X700P Operating Instructions. When the RGB signal distributor to be connected to the projector , connect them as shown below .
27 5. Input select operation check using the TEST button 1 Do not input any signal to LINE4 INPUT of the SRP- X700P . Select VIDEO using the signal format select button and press the TEST b utton in the INPUT SELECT command setup. 2 Confirm that VIDEO is selected as the input signal to the projector .
28 Names and Functions of Contr ols on Scr een 1.6 GROUP F ADER Scr een Y ou can group sev eral faders in order to move multiple internal faders fr om the Remote terminal or from the Master volume contr ol of the SRP-X700P . 1 F ADER GROUP index Enters the index of the F ADER GR OUP .
29 1.7 SCENE Scr een Y ou can set scenes from this scr een. Y ou can store the setups on each screen of INPUT , ROUTING, OUTPUT and GR OUP F ADER into the internal memory of the SRP-X700P or call them from the scene memory . SCENE block Y ou can recall, store or clear the scenes.
30 7 FR ONT P ANEL SCENE RECALL Y ou can assign the scene numbers (1 to 20) to recall, using the SCENE RECALL buttons A to D on the front panel of the SRP-X700P . 8 Inf ormation Enter a comment for the setup file. Y ou can enter up to 128 alphanumeric characters.
31 The User Control P anel software enables y ou to operate the SRP-X700P more simply fr om a personal computer that y ou may use for pr esentations and other purposes. Section 2 User Contr ol Panel Note Start up the User Control Panel after connecting the SRP-X700P to the personal computer .
32 Bef ore contacting a Sony Sales off ice or Dealer , check the f ollowing again. If the trouble persists, contact y our local Sony Sales office or Dealer . T r oubleshooting Cause/Remedy • USB cable is not connected. → Check the connection of the USB cable.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony SRP-X700P è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony SRP-X700P - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony SRP-X700P imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony SRP-X700P ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony SRP-X700P, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony SRP-X700P.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony SRP-X700P. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony SRP-X700P insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
