Manuale d’uso / di manutenzione del prodotto RM-VL610 del fabbricante Sony
Vai alla pagina of 52
4-117-851- 11 (1) Integrated Remote Commander Operating Instructions ©2008 Sony Corporation RM-VL610.
2 F or the customers in the U .S.A. W ARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide reasonable protection against harmful interference in a r esidential installation.
3 F eatur es The RM-VL610 Remote Commander provides centralized contr ol of all your A V components from a single r emote commander and saves the trouble of operating dif ferent A V components with differ ent remote control devices. The following ar e its main features.
Startup Guide This guide shows you how to set the Remote Commander to operate your components. First, find the four-digit component code number for your component, referring to the supplied “Component code numbers.” Example: To set up a TV of the code number “801 1” 1 Set the Remote Commander for code input mode.
1 Place the RM-VL610 head to head with your VCR’ s r emote contr ol. 2 Set the RM-VL610 for “learning” mode. Press and hold SET for at least 3 seconds until the SET indicator flashes.
6 T able of Contents Getting Started Installing the Batteries ................................................................................. 8 When to replace the batteries ...........................................................................
7 Additional Information Precautions ................................................................................................. 36 Maintenance ............................................................................................... 36 Specifications .
8 Getting Started Installing the Batteries Slide open the battery compartment lid and insert two size AA (R6) batteries (not supplied). Be sure to match up the + and – indications on the batteries with the + and – indications on the battery compartment.
9 Location of Contr ols 1 SET indicator 2 SET button 3 Component Select buttons Light or flash during operation. 4 INPUT button 5 PIP button 6 Number buttons 7 DOT button 8 VOL +/– buttons * 9 MUTIN.
10 2 Press and while holding SET , press MENU. The SET indicator lights up. Example: T o set up a Philips’ TV 1 See the tables in the supplied “Component Code Numbers,” and find the four-digit component code number for the desired component. If more than one code number is listed, use the number that is listed first.
11 3 Press the Component Select button for the desired component. The SET indicator and the selected Component Select button lights up. 4 Press the Number buttons to enter the four-digit component code number . 5 Press ENT . The SET indicator and the Component Select button light turns off.
12 Setting the Code for non-Sony Preset Audio and Visual Components — Setting component codes (continued) Checking if the code number works 1 Power on the component with its power switch. 2 Press the corr esponding Component Select button for the component you have set up.
13 1 Press and while holding SET , press MENU. The SET indicator lights up. 2 Press the Component Select button for the desired component. The SET indicator and the selected Component Select button lights up. 3 Press CH + or CH – and POWER in turn until the component reacts as described in the following.
14 Example: T o operate a video cassette recor der 1 Press the desir ed Component Select button. The Component Select button lights up when you press it, and turns off when you r elease it. 4 Press ENT . The SET indicator and the Component button turns off.
15 To control the volume Press VOL +/– to control the volume. Press MUTING to mute the sound. When you select a visual component, the TV’s volume will be controlled (TV Component Select button lights up), and when you select an audio component, the amplifier ’s volume will be controlled (AMP Component Select button lights up).
16 Example: T o program the H (Play) signal of your video cassette recor der to the VCR H (Play) button of the Commander 1 Place the RM-VL610 head to head with your component’s remote control.
17 4 Press the button on the Commander you want to “teach.” The SET indicator flashes and the selected Component Select button lights up. (Learning function standby).
18 Programming Signals of Another Remote Control — Learning Function (continued) 5 Press and hold the button on the other remote contr ol, until both the SET indicator and the Component Select button lights up again. During data transfer , only the SET indicator stays lit, and the Component Select button turns off.
19 Continued When you “teach” signals to V OL +/– or MUTING • If you used the Learning function to program the VOL +/– or MUTING buttons to send any signal to components other than the TV or AMP , that signal will be transmitted only by pressing VOL +/– or MUTING when you select that component.
20 2 Press and hold the Component Select button for the component whose signals are to be “learned” for over 3 seconds. To teach signals to the SYSTEM CONTROL buttons, pr ess and hold the desired SYSTEM CONTROL button for over 3 seconds. Both the SET indicator and the selected Component Select button light up.
21 Continued 3 Press and hold the button on the other remote contr ol, until the SET indicator lights and all the Component Select buttons flash again. During data transfer , only the SET indicator stays lit, and the Component Select button turns off.
22 Programming signals of another r emote contr ol — Lear ning Function (continued) Changing or erasing the function of a “learned” button To change the “learned” function, clear it first and perform Learning again.
23 To clear all function signals “learned” for a specific Component Select button Example: T o erase all functions “learned” by the VCR button 1 Press and hold SET for over 3 seconds.
24 Programming signals of another r emote contr ol — Lear ning Function (continued) 2 While holding x pressed, press the Component Select button you want to erase. When erasing of a “learned” function has completed, all the other Component Select button lights turn off.
25 1 Press and while holding SET , press MENU. The SET indicator lights up. Component Select button TV VCR CBL DVD SAT AMP CD TAPE Controls the volume of TV TV TV TV TV amplifier amplifier amplifier A.
26 Controlling the V olume of Visual Components Connected to an Audio System (continued) 2 While holding MUTING pressed, pr ess VOL + or VOL –. To set all volume controls to AMP Press VOL + while holding MUTING pressed. All Component Select buttons light up when you press these buttons, and then turn off when you release them.
27 Example: T o clear the Power -on command 1 Press and while holding SET , press MENU. The SET indicator lights up. Adding an Extr a Function to the Component Select Buttons Progr amming the Power -O.
28 To cancel the setting, press SET . To program the P ower -On command Repeat the same procedur e, pressing the desir ed Component Select button. Notes • If the component code of a non-Sony brand has been set on a Component Select button, you cannot program the Power-On function on it.
29 Executing a Series of Commands — System Contr ol Functions W ith the System Control function, you can program a series of operating commands, and execute them by pressing just one button. Y ou can program up to 16 consecutive operation steps to each of the SYSTEM CONTROL buttons (1 – 4).
30 Example: To pr ogram the procedur e above to the SYSTEM CONTROL 2 button 1 Press and while holding SET , press the SYSTEM CONTROL 2 button. The SET indicator light turns on. If a System Control function (System Control Macr o) has already been set on the button, the SET indicator flashes twice.
31 Executing a Series of Commands — System Control Functions (continued) T ips for pr ogramming the System Control functions The following information helps you to program a consecutive operation steps. About the order of operation steps Some of the components may not accept consecutive remote contr ol signals.
32 Progr amming a Series of Commands on the Component Select Buttons As with the SYSTEM CONTROL buttons, you can also program a series of operating commands for the Component Select buttons (up to 16 steps). To execute the commands programmed on a Component Select button by the System Control function, pr ess the button for more than 2 seconds.
33 Programming a Series of Commands on the Component Select Buttons (continued) To clear progr ammed commands 1 Press and while holding SET , press and hold for more than 3 seconds the Component Select button you want to clear .
34 1 Press and while holding POWER, press INPUT and CH +. The SET button and the Component Select button currently selected flash once, and the Hold function is set. While the Hold function is on, no function can be operated. (The SET button and the Component Select button currently selected flash twice.
35 1 While holding POWER pressed, pr ess INPUT and VOL –. When pressing the POWER button and the INPUT button, all the Component Select buttons go off. When pr essing the VOL – button while holding down the POWER button and the INPUT button, the SET indicator lights up and the Component Select buttons light up one by one.
36 Specifications Operating distance Approx. 32.8 ft (10 m) (varies depending on components of different manufactur ers) Power requir ements T wo size AA (R6) batteries Battery life Approx. 1 year (varies depending on frequency of button use - up to approx.
37 Tr oubleshooting If you have problems setting up or using the Remote Commander , first check the batteries (page 8), then check the items below . Remedy • Move closer to the component. The maximum operating distance is approximately 32.8 ft. (10 m).
38 Symptom The SET indicator flashes five times during the Learning procedure. A Component Select button flashes five times during setting. The SET indicator flashes twice during the Learning procedure.
39 KEY DISPLAY qd POWER 3qh4 1 – 9, 0, ENT, DOT 1 INPUT qf INFO (DISPLAY) qg SLEEP wa MENU ws f ws F TV FUNCTION To turn on and off. To change the channel. For example, to change to channel 5, press 0 and 5 (or, press 5 and ENT). To change the input mode.
40 KEY DISPLAY qd POWER 3qh 1 – 9, 0, ENT qf INFO (DISPLAY) 2 PIP (ANT/SW) 1 INPUT wa MENU ws f ws F ws G ws g ws OK qs m qs H qs M qs REC z qs x qs X qj CH +/– qa EXIT qk RECALL (DRIVE SELECT) VCR FUNCTION To turn on and off. To change the channel.
41 Continued KEY DISPLAY qd POWER 34qh 1 – 9, 0, DOT, ENT 1 INPUT (TV/SAT) qf INFO (DISPLAY) 9 FAV (FAVORITE) wd TOOLS (Station Index) q; GUIDE qa EXIT wa MENU ws f ws F ws G ws g ws OK qj CH +/– qk RECALL qs PIP qf SLEEP qs . qs > qs m qs H qs M qs REC z SA T FUNCTION To turn on and off.
42 KEY DISPLAY qd POWER 3 1 – 9, 0 4 DOT (+10) qh ENT qf INFO (DISPLAY) 7 C (CLEAR) qa EXIT (RETURN) 2 PIP (SUBTITLE) wa MENU (DVD MENU) ws f ws F ws G ws g ws OK qs m qs H qs M qs REC z qs x qs X qs qs qj CH + qj CH – DVD FUNCTION To turn on and off.
43 KEY DISPLAY qd POWER 3qh 1 – 9, 0, ENT 1 INPUT qf INFO (DISPLAY) qa EXIT (CLEAR) q; GUIDE (EPG) qs m qs H qs M qs REC z qs x qs X qs . qs > qs qs wa MENU ws f ws F ws G ws g qk RECALL D VR ( Digital v ideo recorder) FUNCTION To turn on and off.
44 T able of Preset Functions (continued) KEY DISPLAY qd POWER 3 1 – 9, 0 4 DOT (+10) qh ENTER qk RECALL (D.SKIP) qs m qs H qs M qs x qs X qs > qs . qf INFO (DISPLAY) q; GUIDE (CLEAR) wd TOOLS (PLAY MODE) 7 B (OPEN/CLOSE) CD FUNCTION To turn on and off.
45 KEY DISPLAY qd POWER qs m qs H 4 DOT ( n ) qs M qs REC z qs x qs X qk RECALL (A/B) qa EXIT ( z ) ws f ( H ) wd TOOLS ( x ) ws G ( M ) ws g ( m ) qh ENT ( n ) ws F ( X ) DECK FUNCTION To turn on and off. To rewind. To play. To reverse. To fast-forward.
46 KEY DISPLAY qd POWER 3 1 – 9, 0 4 DOT (+10) qh ENTER qs m qs H qs M qs x qs X 7 D (TOP MENU) qf INFO (DVD DISPLAY) qs . qs > 1 INPUT 2 PIP (SUBTITLE) ws f ws F ws G ws g ws OK wa MENU qa EXIT .
47 KEY DISPLAY qd POWER 34qh 1 – 9, 0, ENT, DOT qf INFO (DISPLAY) 9 FAV (FAVORITE) wa MENU ws f ws F ws G ws g ws OK qj CH +/– qk RECALL q; GUIDE (EPG) Digital TV TUNER FUNCTION To turn on and off. To change the channel. For example, to change to channel 5, press 0 and 5 (or, press 5 and ENT).
48 Index A, B Batteries 8 C, D Changing 22 CH (CHANNEL) button 13 Clearing/Changing learned signal 22, 23 Power-On command 27 Code numbers 10, 13 Component Select buttons assigning other components 33.
.
.
.
Printed in China.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony RM-VL610 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony RM-VL610 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony RM-VL610 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony RM-VL610 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony RM-VL610, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony RM-VL610.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony RM-VL610. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony RM-VL610 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
