Manuale d’uso / di manutenzione del prodotto NSR-1100 del fabbricante Sony
Vai alla pagina of 46
NSR-1000 Series NSR-1200/NSR-1 100/NSR-1050H V ersion 1.1.1 Release Note 1 st Edition Last Modified Date: Dec. 18 th , 2009 ⓒ 2009 Sony Corporation.
Copyright Notice ©2009 Sony Corporation. All rights reserved . This document may not be reproduced, translated or reduced to any machine readable form in w hole or in part, without prior written approval from Sony Corporat ion.
Index １ Overview ............................................................................................................................... 1 １ - １ Additional features by v1.1.1 ..............................................................
４ - １ - ３ Main W indow - Search and Play back .............................................................. 19 ４ - １ - ４ Main W indow – Monitoring .............................................................................. 20 ４ - １ - ５ Analog Camera Control .
NSR-1000 Series v1.1.1 Release Note １ Overview This release note provides the information for the software of the NSR-1200 / NSR-1 100 / NSR-1050H. For the b uilt-in NSR Client (IMZ -NS Series) software, please refer to the release note of the RealShot Manager Adva nced included in t he client software.
NSR-1000 Series v1.1.1 Release Note SNC-RX5 70 v3.10/2.40 or higher SNC-CS50 v2.30 or higher SNC-RZ50 v2.40 or higher SNC-DF50 v1.20 or higher SNC-DF80 v1.20 or higher SNC-DF85 v1.20 or higher １ - １ - ４ Exp ansion of supported languages Newly supports Polish a nd Korean.
NSR-1000 Series v1.1.1 Release Note V1.0.0 1.0.0.26 1.0.0.16 1.2.0.7 V1.0.1 1.0.1.4 1. 0.1.4* 1.2.0.1 1 V1.0.4 1.0.4.6 1. 0.4.6* 1.2.1.5 V1.1.0 1.1.0.20 1.1.0.19 1.2.2.4 V1.1.1 1.1.1.7 1.1.1.7 1.2.3.0 *New RealShot Manager Advanced is planned to be released.
NSR-1000 Series v1.1.1 Release Note １ - ４ Support Camera Information Sony Camera Model Name Camera Firmware V ersion SNC-CM120 v1.02 or higher SNC-CS3 v1.08 or higher SNC-CS10 v1.06 or higher SNC-CS1 1 v1.06 or higher SNC-CS20 v1.02 or higher SNC-CS50 v2.
NSR-1000 Series v1.1.1 Release Note SNC-Z20 v1.06 or higher SNT -EP104 v1.04 or higher SNT -EP154 v1.04 or higher SNT -EX101 v1.04 or higher SNT -EX101E v1.04 or higher SNT -EX104 v1.04 or higher SNT -EX154 v1.04 or higher SNT -V704 v2.16 or higher Axis Camera Model Name Camera Firmware V ersion Axis 206 v4.
NSR-1000 Series v1.1.1 Release Note Axis 214PT Z v4.40 Axis 215PTZ v4.40 Axis 232D+ v4.41 Axis 233D v4.48.1 Axis 241Q v4.30 Axis 241QA v4.30 Axis 241S v4.40 IQinV ision Camera Model Name Camera Firmware V ersion IQeye510 v2.8/6(080313) IQeye51 1 v2.8/6(080313) IQeye702 v2.
NSR-1000 Series v1.1.1 Release Note ２ Important notes ・ The cameras and camera servers lis ted be low have some restrictions at V1.04 firmware. SNC-RH series SNC-RS series SNT -EP series SNT -EX series The following are planned to be solved in a future release (V .
NSR-1000 Series v1.1.1 Release Note ３ Notes ３ - １ Installation / System Configuration ・ The NSR-1000 Series cannot connect with th e client if the setting for ‘Network Interface for Remote C lient’ on the ‘Ser ver C onfiguration’ is configured as ‘Network3’.
NSR-1000 Series v1.1.1 Release Note NTSC Resolution Maximum frame rate CIF(352x240) 480 2CIF(704x240) 240 4CIF(704x480) 120 PA L Resolution Maximum frame rate CIF(352x288) 400 2CIF(704x288) 200 4CIF(704x576) 100 ・ User cannot change parameters about recording settings of analog cameras in the ‘Schedule Configuration’.
NSR-1000 Series v1.1.1 Release Note ・ "Smooth Sc aling" function is available for only one monitor frame which is currently selected. This function is no t applied to second display . (VT1:2069) ・ The DIRECT PTZ function is not sup ported on camera servers SNT -EX/EP series connected to analog cameras.
NSR-1000 Series v1.1.1 Release Note ・ Y ou can select only the on e check box in the search results list. Playback is enabled for the selected search res ult. Exporting is enabled for the selected search result, too. Y ou can protect /unprotect the recordings if their background is turned into blue with the ch eck box selected.
NSR-1000 Series v1.1.1 Release Note internal value not to over the limita tion. (V1 1N:335) ・ Regarding following ca meras, if user us e the VMD (Camera) with the cod ec as MPEG4, the frame rate is limited as 20FPS with NTSC or 16FPS with P AL.
NSR-1000 Series v1.1.1 Release Note ・ The image size of more than QVGA (320x240) is selected, the maximum frame rate is limited at the transmission side as follows: NTSC: 10 fps or less P AL: 8 fps .
NSR-1000 Series v1.1.1 Release Note values diffe rent from actual ones when making configurations for the cameras/camera servers shown b elow (V1 1R:483) SNC-RH series SNC-RS series SNT -EP series SNT -EX series In this case, perform the adjustment of the detection area size while viewing on the frame in the conf iguration screen.
NSR-1000 Series v1.1.1 Release Note registration. (V1 1N:461) ３ - １１ Action Configuration ・ N/A ３ - １２ Schedule Configuration ・ If user sets the schedu le record of following cameras with the ‘Automatic Record Configuration’, the codec set ting shall be not MPEG4 but JPEG.
NSR-1000 Series v1.1.1 Release Note between start and stop t ime of recor ding is too long or the time displayed on the monitor frame jumps suddenly . Please change the system time after stopping to record.
NSR-1000 Series v1.1.1 Release Note ・ When you c hange the video-related options (Image Size, Image Quality and Frame Rate) on the [V ideo] tab while mo nitoring/recording a JPEG image an AXIS camera is capturing, monitoring or recording may continue with the previous settings.
NSR-1000 Series v1.1.1 Release Note the value sp ecified by “Frame rate”. It also depends on combination of image size and frame rate. (V1 1R:58) Before use, be sur e to check whether an i mage is output at the spe cified frame rate. If not, reconfigure the image size or frame rate to the other value.
NSR-1000 Series v1.1.1 Release Note ４ Limitations ４ - １ Known Limitations ４ - １ - １ Installation / System Configuration ・ When enabling the SNMP agent function under [Administration] menu -> [Setup] menu -> [SNMP Menu] ->[T rap], the error message below is displayed and the ERROR lamp is lit.
NSR-1000 Series v1.1.1 Release Note for continu ous recording, it takes more than ten minutes to load the recorded data since [PLA YBACK] is pressed. Wh en you want to select “iSCSI” as recording .
NSR-1000 Series v1.1.1 Release Note ・ When recor ding audio from a camer a of which frame rate is set to less than 1fps , you cannot play back audio in synchronization with image. For example, i n case of 0.25fps, a four-second image is played back per a frame.
NSR-1000 Series v1.1.1 Release Note ４ - １ - ６ Alarm Notification / Alarm History ・ If user tries to play back the camera with double-clicking alarm history during playing back it on the other monitor fram e, the NSR-1000 Series cannot start to play back and live image is displayed.
NSR-1000 Series v1.1.1 Release Note selected, actual frame ra te is 1fps. (VT1:1842) ・ Y ou can change multiple registration de tails by selecting two or more camera s at time, if they are all the same model. If 29 or more cameras are selected, however , there are cases where the maximum value cannot be selected from the list.
NSR-1000 Series v1.1.1 Release Note (V1 1N:363,V1 1N:446) In addition, when making the Device configuration settings continuously , there are infrequent cas es where a part of set values etc., is not displayed by screen refresh even after th e settings are applied.
NSR-1000 Series v1.1.1 Release Note set up masks again. (V1 1R:484) ４ - １ - ９ Server Configuration ・ Pay attention to the foll owings when you want to change the recording storage from default to other in t he storage settings. It affects th e estimation of storage capacity .
NSR-1000 Series v1.1.1 Release Note ・ If user modifies recordin g settings in ‘S chedule Configuration’ such as alarm to event, the NSR-1000 Series doesn’t reload the default recording settings (codec / Image Size / Image Quality / Bit Rate / Frame Rate) on ‘V ideo’ tab in the ‘Device Configuration’ automatically .
NSR-1000 Series v1.1.1 Release Note Otherwise, t he following issues occur: -An hour is given or taken for the schedule which triggers actions. -Time indication in the a larm history is read an hour behind or early . Note that you cannot play back by clicking the alarm history where the improper time is displayed.
NSR-1000 Series v1.1.1 Release Note P AL/2CIF(704x288) case: 384x288 ４ - １ - １５ Other ・ N/A - 28 -.
NSR-1000 Series v1.1.1 Release Note ４ - ２ Resolved limitations in V1 .1.1 ・ Ther e were some restrictions in V1.02 of the cameras/camera servers below . (V1 1R:386,V1 1R:4 40,V1 1N:379) SNC-RH series SNC-RS series SNT -EP series SNT -EX series The restrictions mentioned below have been solved in V .
NSR-1000 Series v1.1.1 Release Note monito r frames on the NSR even when you pressed MONITOR SELECT button. (V1 1N:478) This issue has been solved. ・ There was a p roblem that communication with the.
NSR-1000 Series v1.1.1 Release Note ・ There was a problem that live image is no t displayed depending on the video codec settings on the SNC-RH seri es camera. (V1 1R:745) This issue has been solved. Example of video c odec settings that cause the trouble: H.
NSR-1000 Series v1.1.1 Release Note ５ Appendix ５ - １ Histories of additional features ５ - １ - １ Additional features by V1.1.0 ５ - １ - １ - １ Expansion of supported cameras Newly supports th e Sony IP network cameras and camera servers sh own below .
NSR-1000 Series v1.1.1 Release Note ５ - １ - １ - ４ 4CIF resolution support Newly supports 4CIF resolution (P AL: 704x 57 6, NTSC: 704x480) for the Sony IP network cameras. Supported model name and firmware version are as follows : Camera Model Name Camera Firmware V ersion SNC-RX530 3.
NSR-1000 Series v1.1.1 Release Note ５ - １ - ２ Additional features by V1.0.4 Object Improvement Server/Client AXIS and IQinV ision ca meras are supported. (VT1:2072, 2099) Client Audio Upload From a C lient is supported. (VT2:728) Server/Client Specifying Camera and Server with Host Name is enabled.
NSR-1000 Series v1.1.1 Release Note Server/Client The NSR-1000 Series and the c lient software start to support controlling PTZ of analog camera via VISCA protocol.
NSR-1000 Series v1.1.1 Release Note ５ - ２ Histories of resolved limit ations ５ - ２ - １ Resolved limitations in V1.1.0 ５ - ２ - １ - １ Main Window – Monitoring ・ Ther e are c ases where a camera do es not move ev en if you select the preset position which is already configured and appears in the preset list.
NSR-1000 Series v1.1.1 Release Note co nfigured before may disappe ar on [Camera Action] tab. After the tour settings are updated in th e device menu, be sure to reconfigure [Action end preset].
NSR-1000 Series v1.1.1 Release Note ５ - ２ - ２ Resolved limitations in V1.0.4 ５ - ２ - ２ - １ Installation / System Configuration ・ When savin g the system configuratio n information in Control Menu, the prohibited characters such as ＃ , ＄ , ％ can be used in the file name.
NSR-1000 Series v1.1.1 Release Note ・ GUI abends at login when lo goff while the alarm history panel is f olded at main monitoring window . (VT1:2188) ・ Play back audio is not available under the following cond itions. (VT1:1906) ・ The layout is changed to 1x1 with th e monitor frame double-clicked during playing back.
NSR-1000 Series v1.1.1 Release Note window , a space can not be used in the Preset name. (VT1:1960) ・ When VMD(Camera) is configured to SN T -V704, the detection area is created as QVGA size even though the detection area is configured as the full screen of the monitor frame.
NSR-1000 Series v1.1.1 Release Note ５ - ２ - ２ - ６ Action Configuration ・ When the s chedule action is s et, the camera preset setting might not be correctly preserved.
NSR-1000 Series v1.1.1 Release Note - 42 - ５ - ２ - ３ Resolved limitations in V1.0.1 ・ There was a possibility t hat some recordin g frames were lo st if the NSR-1000 Series with the NSRE-S200 was carried out over long periods with overwriting.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony NSR-1100 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony NSR-1100 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony NSR-1100 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony NSR-1100 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony NSR-1100, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony NSR-1100.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony NSR-1100. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony NSR-1100 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
