Manuale d’uso / di manutenzione del prodotto KLV 26HG2 del fabbricante Sony
Vai alla pagina of 84
© 2003 Sony Corporation 4-101-857- 11 (1) LCD Color TV Operating Instructions Before operating the unit, please r ead this manual thoroughly and retain it for futur e refer ence. KL V -26HG2 Owner’s Record The model and serial numbers are located at the rear of the TV and on the carton (white label).
2 W ARNING To reduce the risk of fire or shock hazard, do not expose the TV to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient m a gnitude to constitute a risk of electric shock to persons.
3 Important Safety Instructions 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
4 Table of Contents Ta b le of Contents Installing and Connecting the TV Unpacking .................................................. 6 Inserting Batteries into the Remote Control ................................................... 6 Identifying Front and Rear Connectors .
5 Table of Contents “Memory Stick” About the “Memory Stick” ...................... 56 Features of the Memory Stick Home ..... 58 Inserting and Removing a “Memory Stick” ................................... 60 Inserting a “Memory Stick” .
6 Installing and Connecting the TV Installing and Connecting the TV Unpac king When you unpack this unit, make sure it includes the following: Operating Instructions Warranty Card Product Registration.
7 Installing and Connecting the TV Identifying Fr ont and Rear Connector s TV front panel 1 VIDEO 2 IN (pages 12 - 14, 17) Connects to the output jacks of your VCR or other video equipment. 2 Headphones jack Connects to your headphones. If your headphones do not match the jack, use a suitable plug adaptor (not supplied).
8 Installing and Connecting the TV Connecting directl y to cable or an antenna VHF only or VHF/UHF or cable Note It is strongly recommended to connect the antenna using a 75- ohm coaxial cable to get optimum picture quality. A 300-ohm twin lead cable can be easily affected by radio noise and the like, resulting in signal deterioration.
9 Installing and Connecting the TV Connecting the P ower Cor d Complete other connections prior to connecting the power cord. 1 Connect the power cord to the AC IN connector of the TV.
10 Installing and Connecting the TV Bundling Cor ds and Cables You can organize the cables in the back of the TV. 1 Bundle the cables and secure them with the clips on both sides of the TV. Notes • It may not be possible to fasten with clips if cables are too thick.
11 Installing and Connecting the TV Attaching the Rear Co ver Hold the rear cover as illustrated below, fitting the five pegs on the rear cover into the corresponding holes on the TV, then push the rear cover back onto the TV.
12 Installing and Connecting the TV Connecting a VCR and Cab le TV Use this hookup if: • You subscribe to a cable TV system that does not require a cable box. Disconnect all power sources before making any connections. 1 Connect the CATV cable to the VCR’s IN jack.
13 Installing and Connecting the TV Connecting a Satellite Receiver Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack.
14 Installing and Connecting the TV Connecting a Satellite Receiver with a VCR Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. 2 Connect the CATV cable to the VCR’s VHF/UHF IN jack.
15 Installing and Connecting the TV When using your audio system speakers Set “Speaker” in the (Audio) menu to “Off.” The TV’s sound is not output from the AUDIO OUT jacks when “Speaker” is set to “On.
16 Installing and Connecting the TV Connecting a D VD Pla y er with Component Video Connector s This is the preferred hookup to use if: • Your DVD player has component (Y, P B , P R ) jacks. Disconnect all power sources before making any connections.
17 Installing and Connecting the TV Connecting a D VD Pla y er with A/V Connectors Use this hookup if: • Your DVD player does not have component (Y, P B , P R ) jacks. Tip If your DVD player has component video output connectors, for best picture quality, use the connection described on page 16.
18 Installing and Connecting the TV Connecting a Digital TV Receiver Disconnect all power sources before making any connections. 1 Using a component video cable, connect the Digital TV receiver’s Y, P B and P R jacks to the Y, P B and P R jacks on the TV.
19 Installing and Connecting the TV Connecting a Digital Satellite Receiver Disconnect all power sources before making any connections. 1 Using a component video cable, connect the Digital Satellite Receiver’s Y, P B and P R jacks to the Y, P B and P R jacks on the TV.
20 Installing and Connecting the TV Connecting a Digital Satellite Receiver with D VI- HDTV Connector Disconnect all power sources before making any connections. 1 Using a DVI-D single link cable, connect the Digital Satellite Receiver’s DVI-HDTV connector to the TV’s DVI-HDTV connector.
21 Installing and Connecting the TV Setting the Channels After you finish connecting your TV, you can run Auto Program to set up your channels. The Auto Setup menu appears when you turn your TV on for the first time after installing it. To skip channels, see page 22.
22 Installing and Connecting the TV To lock in a TV channel If you have connected a cable box or satellite receiver to your TV, and do not intend to connect any other audio or video equipment, it is recommended that you lock in a TV channel. Doing so will ensure no accidental channel switch when using your TV.
23 Installing and Connecting the TV 1 Press MENU. 2 Press V / v to select (Setup), then press . 3 Press V / v to select “Language,” then press . 4 Press V / v to select your preferred language, then press .
24 Watching the TV MUTING DISPLAY SYSTEM OFF 1 2 W atching the TV 2 3 W atc hing the TV JUMP 1/ I 1 Press POWER on the remote control. Tip When the 1/ (Standby/Sleep) indicator goes off, press I (power) on the TV. 2 Select the desired channel using the 0-9 and ENT (enter) buttons.
25 Watching the TV Off CC1 CC2 Te xt1 Te xt2 Te xt3 Te xt4 CC3 CC4 W atching with closed caption You can display Caption Vision if the broadcaster offers this service.
26 Watching the TV Selecting the Effect Mode “SRS WOW”* creates a panoramic stereo audio image by producing deep and rich bass tones and clear treble tones, enabling you to enjoy powerful sounds effects like those in a movie theater.
27 Watching the TV 1 Press MENU. 2 Press V / v to select (Audio), then press . 3 Press V / v to select “Effect,” then press . 4 Press V / v to select “SRS WOW,” then press . 5 Press MENU to exit the menu screen. Tip Pressing the /TV/SAT button also lets you select “SRS WOW” and “Off.
28 Watching the TV Wide Zoom Normal Full Zoom , Wide Zoom “Wide Zoom” enlarges the 4:3 picture to fill the 16:9 screen, keeping the original image as much as possible. Wide Zoom Original Picture • Normal 4:3 aspect ratio picture • DTV 4:3 aspect ratio picture “Normal” returns the 4:3 picture to its original size.
29 Watching the TV Changing the Wide Screen Mode using the menu 1 Press MENU. 2 Press V / v to select (Screen), then press . 3 Press V / v to select the option you want to set, then press . 4 Press V / v to select the desired screen mode, then press .
30 Watching the TV Tip To change from one Wide Screen Mode to another, use the WIDE MODE button on the remote control. Notes • The 4:3 Default functions only when the TV receives 480i or 480p signals. • If “4:3 Default” is set to anything but “Off,” the Wide Screen Mode setting changes only for the current channel.
31 Watching the TV Using the Freeze Function You can use this feature to write down information such as phone numbers, recipes, etc. When the program information you want to capture is displayed, press FREEZE. The picture freezes. Press FREEZE again, and the frozen picture is released, and the picture begins to move again.
32 Watching the TV Setting the Video Inputs You can enjoy images (and sound) from optional video equipment connected to this unit by selecting the appropriate input. For details on connection, see pages 8 through 20. 1 0-9 and ENT (enter) buttons CH +/– 1 Press TV/VIDEO repeatedly until the desired video input appears.
33 Watching the TV Using the Video Label Feature You can make settings for each video input by choosing the label displayed on the screen. 1 Press MENU. 2 Press V / v to select (Setup), then press . 3 Press V / v to select “Video Label,” then press .
34 Watching the TV Operating Optional Equipment with Y our TV Remote Contr ol Pr ogramming the remote control 2 3 4 1 5 The remote control is preset to operate Sony video equipment.
35 Watching the TV Manufacturer Code Pentax 305, 304 Philco 308, 309 Philips 308, 309, 310 Pioneer 308 Quasar 308, 309, 306 RCA/PROSCAN 304, 305, 308, 309, 311, 312, 313, 310, 329 Realistic 309, 330, .
36 Watching the TV Operating optional equipment Operating a VCR To Turn on/off Control a VCR Change channels Record Play Stop Fast forward Rewind Pause Search the picture forward or backward Press VCR.
37 Watching the TV Using F a v orite Channels You can select programs from a list of favorite channels that you preset. Setting y our fav orite channels 1, 7 2 - 6 1 Press MENU. , Video Exit: Set : Select : Return Mode: Vivid Picture: 50 Brightness: 50 Color: 25 Hue: 0 Sharpness: 3 Backlight: 5 Color T emp.
38 Watching the TV W atching fav orite channels 1 2 , , ABC Fa vo r ite Channels 1 : ABC 2 : HBO 3 : MTV 4 : FO X 5 : CBS 6 : COMED 7 : 7 8 : 8 1 Press FAVORITES. The Favorite Channels list appears. 2 Press V / v to select the desired channel, then press .
39 Watching the TV 2 Press V / v to select (Channel), then press . 3 Press V / v to select “Channel Label,” then press . 4 Press V / v to select “Channel,” then press . 5 Press V / v to scroll through the channel numbers you want to assign a label, then press .
40 Using Advanced Features Using Ad v anced Features To adjust the setting Maximize the setting value To change the menu color You can choose the menu color from two types by selecting “Menu Color” in the (Setup) menu, then selecting “White” or “Black.
41 Using Advanced Features 1 Receive the picture you want to adjust, then press MENU. 2 Press V / v to select (Screen), then press . 3 Press V / v to select “Vertical Center,” then press . 4 Press V / v / B / b to adjust the position, then press .
42 Using Advanced Features 1 Press MENU. 2 Press V / v to select (Video), then press . 3 Press V / v to select “Mode,” then press . 4 Press V / v to select the Picture Mode you want to adjust, then press . 5 Press V / v to select “Picture,” then press .
43 Using Advanced Features 6 Press V / v / B / b to make the desired adjustment, then press . Adjustable options Option Picture Brightness Color Hue* Sharpness** Backlight * The adjustment is not avai.
44 Using Advanced Features Press V / b To increase higher- pitched sounds. To increase lower- pitched sounds. To emphasize the right speaker. 1 Press MENU. 2 Press V / v to select (Audio), then press . 3 Press V / v to select the option you want to adjust, then press .
45 Using Advanced Features Tip You can adjust each option by referring to the value beside each option indicator. 5 Repeat steps 3 and 4 to adjust other options. 6 Press MENU to exit the menu screen. To reset to the factory settings Press RESET while the menu is on the screen and the cursor is located on the right side of any menu item.
46 Using Advanced Features Using the P arental Contr ol Feature The TV programs and movies shown on TV are given a rating signal based on the following rating systems.
47 Using Advanced Features Activ ating the P arental Contr ol f eature 1 Press MENU. 2 Press V / v to select (Parent), then press . 1, 8 3 2, 4 - 7 , Video Exit: Set : Select : Return Mode: Vivid Picture: 50 Brightness: 50 Color: 25 Hue: 0 Sharpness: 3 Backlight: 5 Color T emp.
48 Using Advanced Features To change the password 1 Press MENU. 2 Press V / v to select (Parent), then press . 3 Enter your four-digit password using the 0-9 buttons. The Parent menu options appear. 4 Press V / v to select “Change Password,” then press .
49 Using Advanced Features 1 Perform steps 1 to 6 in “Activating the Parental Control feature” on page 47 to display the Lock options. 2 Press V / v to select “Custom,” then press .
50 Using Advanced Features , Par ent TV TV Rating Select : Back: Exit: Set : Return Rating Content TV -Y : – TV -Y7: – FV: – TV -G: – TV -PG: – D:– L: – S: – V: – TV -14: D: L: – S: V: TV -MA: L: S: V: Example: TV rating in U.
51 Using Advanced Features Option Description Allow Block Allows programs and movies that are broadcast without a rating. Blocks all programs and movies that are broadcast without a rating.
52 Using Advanced Features U.S. TV ratings U.S. TV ratings are for TV programs rated according to the U.S. Television Parental Guidelines. Option TV-Y (All Children) TV-Y7 (Directed to Older Children).
53 Using Advanced Features About the extenders of U.S. TV ratings TV-Y7, TV-PG, TV-14 and TV-MA ratings have additional content ratings called “extenders” to define additional viewing limits.
54 Using Advanced Features Canadian French Language ratings The Canadian French Language ratings are for TV programs in French broadcast in Canada. Option G (General) 8 ans+ (8+ General — Not recomm.
55 Using Advanced Features T urning Off the TV A utomatically You can set the TV to turn off automatically after a predetermined period of time (15, 30, 45, 60, or 90 minutes).
“Memory Stick” 56 “Memory Stic k” About the “Memory Stic k” What is a “Memory Stick”? A “Memory Stick” is a compact, portable and versatile Integrated Circuit recording medium with a data storage capacity that exceeds that of a floppy disk.
“Memory Stick” 57 Notes on “Memory Stick Duo” • To use a “Memory Stick Duo” with this unit, attach it to the Memory Stick Duo adapter before inserting it into the unit. • Make sure that you attach the “Memory Stick Duo” to the adapter correctly.
“Memory Stick” 58 Op tio n Date : No . Size : Se t : Se l : Se l ec t F o Di g i. C ame r Se l : Ba Se l ec t F o l der Dat e : 2 00 1 / FEB / 14 5 :2 5 P M Features of the Memory Stic k Home You can view files on a “Memory Stick” recorded and saved by a digital camera or a digital video camera recorder using this TV.
“Memory Stick” 59 Di g i. C a m Se l ec t F o l de Se l : D a t e : 2 00 1 / FEB /1 1 S iz e : 35 2x24 0 Se l : Ne xt : Full Sc r ee Me nu Rotate and view at a different angle • You can rotate y.
“Memory Stick” 60 Inser ting and Remo ving a “Memory Stick” Inser ting a “Memory Stick” Insert the “Memory Stick” into the Memory Stick slot with the b mark facing forward as illustrated below until it clicks. The “Memory Stick” access lamp flashes, then goes out.
“Memory Stick” 61 Memory Stick Home Slide Show Option Digi. Camera Mode File : Date : No. : Size : Set : Sel : Select Folder Displa ying the Memory Stic k Home The Memory Stick Home feature allows you to display an index of thumbnail images that are on the “Memory Stick.
“Memory Stick” 62 Slide Show Option Digi. Camera Mode File : 100MSDCF/CBAR0002.JPG Date : 2001/FEB/14 5:25PM No. : 2/25 Size : 640x480 Set : Sel : Select Folder Memory Stick Home The Memory Stick .
“Memory Stick” 63 Pla ying “Slide Show” 1 Insert a “Memory Stick” that contains the images you want to view. Be sure to insert the “Memory Stick” correctly (see page 60). 2 Press (“Memory Stick”) on the remote control. The Memory Stick Home appears on the screen.
“Memory Stick” 64 Vie wing Photos Viewing digital photos at full- screen size 2 3 - 5 1 Insert a “Memory Stick” into the Memory Stick slot. Be sure to insert the “Memory Stick” correctly (see page 60). 2 Press (“Memory Stick”) and the Memory Stick Home screen appears.
“Memory Stick” 65 Rotating and vie wing y our digital photos You can rotate digital photos in 90 degree increments clockwise or counterclockwise. 2 3 - 6 1 Insert a “Memory Stick” into the Memory Stick slot. Be sure to insert the “Memory Stick” correctly (see page 60).
“Memory Stick” 66 Pla ying Mo vies (“Mo vie Pla yer”) 2 3 - 5 1 Insert a “Memory Stick” into the Memory Stick slot. Be sure to insert the “Memory Stick” correctly (see page 60). 2 Press (“Memory Stick”), and the Memory Stick Home screen appears.
“Memory Stick” 67 To switch the voice channel 1 Press V / v to select “Menu” on the Movie Player screen, then press . The Movie menu appears. 2 Press V / v to select “Audio Select,” then press . 3 Press V / v to select the item you want to set, then press .
“Memory Stick” 68 3 Press V / v / B / b to select the image you want to protect, then press . The Index menu appears. , Se l : B Se l ec t F o l der Date : 2001 / FEB / 14 5 :2 5 P M Di g i. C ame r 4 Press V / v to select “Protect,” then press .
“Memory Stick” 69 Deleting digital photos or mo vies You can delete unwanted files from a “Memory Stick.” However, please be careful when deleting files, as they cannot be recovered once they are deleted. 2 3 - 6 1 Insert a “Memory Stick” into the Memory Stick slot.
“Memory Stick” 70 About the Memory Stic k Home Menu Options You can check the “Memory Stick” type, or its current status. 2 3, 4 1 Insert a “Memory Stick” into the Memory Stick slot. Be sure to insert the “Memory Stick” correctly. (see page 60) 2 Press (“Memory Stick”), and the Memory Stick Home screen appears.
“Memory Stick” 71 Selecting a f older and viewing digital photos or mo vies To view digital photos or movies that have been made into albums and saved in a folder using a PC, you must first select the folder. To select these photos or movies, you must set “Digi.
“Memory Stick” 72 You can move up to the next level. Sor ting image files You can sort the image files stored on a “Memory Stick” by name or by recorded date order. To do this, first set “Digi. Camera Mode” on the Select Folder menu of the Memory Stick Home screen to “Off.
“Memory Stick” 73 3 Press V / v to select “Option,” then press . The Option Settings menu appears. , 1 00 M S D CF Da t e : Se l ec t F o l der Se l : B 4 Press V / v to select “File,” then press . , 1 00 M S D CF Da t e : Se l ec t F o l der Se l : B 5 Press V / v to select “Sort,” then press .
“Memory Stick” 74 The image file is in the JPEG or MPEG1 format but is not DCF-compatible. There is a thumbnail image but it is not DCF- compatible. There is no selected image file. There is an image file but the thumbnail image is corrupted. The image file is corrupted.
“Memory Stick” 75 Read Only Memory A read-only “Memory Stick” has been inserted. You cannot record or delete the data on a read-only “Memory Stick.
Additional Information 76 • Make sure the power cord is connected securely. • Turn on the power of the TV. • Check antenna/cable connections. • Set “Cable” to “Off” in the (Channel) menu (page 21). • Perform Auto Program to add receivable channels that are not presently in the TV’s memory (page 21).
Additional Information 77 • Check antenna/cable connections. • Check the antenna location and direction. • Check if the antenna is broken or bent. • Check if the antenna has reached the end of its serviceable life. (3-5 years in normal use, 1-2 years at the seaside.
Additional Information 78 “Memory Stick” Cannot insert the “Memory Stick” into the Memory Stick slot. Cannot delete a file or all materials. The still image files in the JPEG format stored in a “Memory Stick” cannot be displayed. The moving image files in the MPEG1 format stored in a “Memory Stick” cannot be displayed.
Additional Information 79 Specifications Television system: American TV standard Channel coverage: VHF: 2-13/UHF: 14-69/CATV: 1-125 Antenna: 75-ohm external terminal for VHF/UHF Screen size (measured diagonally): 26 inches Panel System: a-Si TFT Active Matrix LCD panel (Effective dots: more than 99.
Additional Information 80 Inde x to P ar ts and Contr ols TV Fr ont panel I TV/VIDEO CHANNEL VOLUME VIDEO 2 IN S VIDEO VIDEO A UDIO L R I 1/ “Memory Stick” Access indicator Standby/Sleep indicator page 24 Power indicator Remote Control sensor I (power) switch page 21 CHANNEL +/– buttons page 21 Tip The CHANNEL + button has a tactile dot.
Additional Information 81 Remote contr ol buttons Tip The MTS/SAP button, the number 5 button and the CH + button have a tactile dot. Use the tactile dot as a reference when operating the TV.
Additional Information 82 Inde x F Favorite channels .................................. 37 Front and rear connectors ....................... 7 Full ........................................................ 28 I Input select ............................
Additional Information 83.
Printed in U.S.A..
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony KLV 26HG2 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony KLV 26HG2 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony KLV 26HG2 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony KLV 26HG2 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony KLV 26HG2, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony KLV 26HG2.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony KLV 26HG2. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony KLV 26HG2 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
