Manuale d’uso / di manutenzione del prodotto KE 42M1 del fabbricante Sony
Vai alla pagina of 84
© 2004 Sony Corporation 2-021-773- 11 (1) Flat P anel Color TV Operating Instructions KE-42M1.
2 Owner’s Record The model and serial numbers are located at the rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
3 WARNING To reduce the risk of fire or shock hazard, do not expose the TV to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
4 CAUTION Use the following SONY appliance(s) only with the following WALL- MOUNT BRACKET. Use with other WALL-MOUNT BRACKET may cause instability and result in possible injury. SONY APPLIANCE MODEL NO. KE-42M1 SONY WALL-MOUNT BRACKET MODEL NO. SU-PW2 To Customers Sufficient expertise is required for installing the specified product.
5 For the set with a three-wire grounding type AC plug This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to have a suitable outlet installed.
6 Installation and mo ving Carry the TV in the specified manner Carrying the TV requires at least two people. If you carry the TV in a manner other than that specified and without the specified number of persons, it may drop and a serious injury may result.
7 Outdoor use Do not install this unit outdoors. If the unit is exposed to rain, it may result in fire or electric shock. If the unit is exposed to direct sunlight, the unit may heat up and it may damage the unit. Vehicle and ceiling Do not install this unit in a vehicle or hung from the ceiling.
8 Service Damage Requiring Service Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions: s When the power cord or plug is damaged or frayed. s If liquid has been spilled into the set. s If the set has been exposed to rain or water.
9 Ta b le of Contents Installing the TV Unpacking ................................................ 11 Overview of the Remote Control ............ 11 Remote Control Descriptions ........... 12 Programming the Remote Control ... 14 Using your Remote Controls with Other Equipment .
10 Using Adv anced Features Adjusting the Picture Position Vertically .............................................. 57 Adjusting the Picture Position Horizontally ......................................... 58 Adjusting the Picture Quality ............
11 Installing the TV Installing the TV Unpac king When you unpack this unit, make sure it includes the following: Clamp Screws (2) Plug Holder for AC Power Cord (1) Cleaning Cloth (1) Operating Instru.
12 Remote Contr ol Descriptions MUTING PICTURE WIDE FAV ORITES TV VIDEO 1/2/3 VIDEO 4 VIDEO 5 F1 F2 MENU SLEEP DISPLA Y MODE SA T/ CABLE D VD/ VCR PO WER FREEZE TO P MENU RESET PIC OFF MTS/SAP GUIDE T.
13 Installing the TV Button Description 0 Input Select Buttons qa VOL +/– qs RESET qd PIC OFF qf POWER qg DISPLAY qh SLEEP qj 0 - 9 ENTER qk MENU ql w; F1 wa F2 ws CH +/– Press to select the video equipment connected to the TV’s video inputs. TV : Press to select the TV to watch the TV programs.
14 Pr ogramming the Remote Control The remote control is preset to operate Sony brand video equipment. Sony Equipment Programmable Code Number DVD/VCR 701 (Sony Dream System) SAT/Cable 801 (Satellite .
15 Installing the TV Manufacturer’s codes DVD Manufacturer Code Sony 751 General Electric 755 Hitachi 758 JVC 756 Magnavox 757 Mitsubishi 761 Panasonic 753 Philips 757 Pioneer 752 RCA, Proscan 755 Samsung 758 Toshiba 754 Zenith 760 DVD changer Manufacturer Code Sony 765 Panasonic 766 DVD 5.
16 Operating a VCR To Turn on/off Control a VCR Change channels Record Play Stop Fast forward Rewind Pause Search the picture forward or backward Press DVD/VCR (POWER) DVD/VCR (FUNCTION) CH +/– N an.
17 Installing the TV Operating a DVD player or DVD Changer To Turn on/off Control a DVD player If you have a DVD changer, to skip disks Play Stop Pause Step through different tracks of an audio disc S.
18 Overview of the TV Contr ols and Connector s Fr ont P anel Controls and Connector s To open the drop-down panel To open the drop-down panel of your TV, push up the panel door just under the mark until you hear a click, then the panel door will open.
19 Installing the TV Rear P anel Connector s AC IN HD/DVD IN A UDIO OUT (V AR/FIX) P R P B Y VIDEO IN 1 S VIDEO VIDEO A UDIO L(MONO) R A UDIO L R A UDIO L(MONO) R 3 4 A UDIO IN 5 L R IN CENTER SPEAKER.
20 After connections with antennas and other equipment are completed, be sure to attach the supplied clamp screws to the rear of the TV, and pass a sturdy cord or chain and attach it to a wall or pillar. 1 Remove one of the two screws at the rear of the TV, then attach the supplied clamp screw to the screw hole.
21 Connecting and Setting the TV Connecting directl y to cable or an antenna VHF only or VHF/UHF or cable Note It is strongly recommended to connect the antenna using a 75- ohm coaxial cable to get optimum picture quality. A 300-ohm twin lead cable can be easily affected by radio noise and the like, resulting in signal deterioration.
22 Complete other connections prior to connecting the power cord. 1 Connect the power cord to the AC IN connector of the TV. 2 Secure the AC power plug to the display’s AC IN jack.
23 Connecting and Setting the TV Connecting a VCR and Cab le TV Note When you connect video equipment to both the VIDEO and the S VIDEO input jacks, make sure “Auto YC” in the (Setup) menu is set to “On” to view the S VIDEO input (see below). Tips • You can also use the VIDEO IN 2 jacks located on the front of the TV to connect your VCR.
24 Connecting a Satellite Receiver Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. 2 Using AUDIO and S VIDEO cables, connect the satellite receiver’s AUDIO and S VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks (VIDEO IN 1 or 3).
25 Connecting and Setting the TV HD/DVD IN A UDIO OUT (V AR/FIX) P R P B Y CENTER SPEAKER IN 180W (6 ) MAX VIDEO IN VHF/UHF 1 S VIDEO VIDEO A UDIO L(MONO) R AU DI O L R A UDIO L(MONO) R 3 4 VIDEO (yel.
26 When using your audio system speakers You can control the volume output from your audio system using the TV’s remote control (see “Programming the Remote Control” on page 14), by setting “Audio Out” in the (Audio) menu to “Variable.” If you want to adjust the volume through your audio system, set “Audio Out” to “Fixed.
27 Connecting and Setting the TV HD/DVD IN P R P B Y 4 VIDEO IN 1 S VIDEO VIDEO A UDIO L(MONO) R 3 A UDIO OUT (V AR/FIX) P R P B Y CENTER SPEAKER IN 180W (6 ) MAX A UDIO L R A UDIO L(MONO) R Connecting a D VD Pla y er with Component Video Connector s Use this hookup if: •Y our DVD player has component (Y, P B , P R ) jacks.
28 Connecting a D VD Pla yer with S Video and A udio Connector s Use this hookup if: •Y our DVD player does not have component (Y, P B , P R ) jacks. Tip If your DVD player has component video output connectors, for best picture quality, use the connection described on page 27.
29 Connecting and Setting the TV Connecting a Digital Cable Bo x Disconnect all power sources before making any connections. 1 Using a component video cable, connect the Digital Cable Box’s Y, P B and P R jacks to the Y, P B and P R jacks on the TV.
30 Connecting a Digital Satellite Receiver Disconnect all power sources before making any connections. 1 Using a component video cable, connect the Digital Satellite Receiver’s Y, P B and P R jacks to the Y, P B and P R jacks on the TV. Use the HD/DVD IN 4 connections.
31 Connecting and Setting the TV VIDEO IN 1 S VIDEO VIDEO A UDIO L(MONO) R 3 A UDIO IN 5 L R IN Connecting a Digital Satellite Receiver with HDMI Connector Use this hookup if: •Y our Digital Satellite Receiver has a High-Definition Multimedia Interface (HDMI).
32 VIDEO IN 1 S VIDEO VIDEO A UDIO L(MONO) R 3 A UDIO IN 5 L R IN HDMI to DVI-HDTV adapter or cable (not supplied) AUDIO-L (white) AUDIO cable (not supplied) Digital Satellite Receiver Rear of TV AUDI.
33 Connecting and Setting the TV Use this hookup if: •Y ou have a digital audio device that is PCM/Dolby Digital compatible, such as an AV Receiver with a Dolby Pro Logic system decoder.
34 S VIDEO VIDEO L AUDIO R VIDEO IN 2 (MONO) Connecting a Camcor der Disconnect all power sources before making any connections. Using an A/V cable, connect the Camcorder’s A/V OUT jack to the TV’s AUDIO IN jacks and VIDEO IN jack (VIDEO IN 2). Tip You can also use the VIDEO 1 and 3 jacks located on the rear of the TV to connect your camcorder.
35 Connecting and Setting the TV Setting the TV Setting the Channels After you finish connecting your TV, you can run Auto Program to set up your channels. The Auto Setup menu appears when you turn your TV on for the first time after installing it. To skip channels, see page 36.
36 To watch VHF/UHF channels with an antenna 1 Press MENU. 2 Press V / v to select (Channel), then press . 3 Press V / v to select “Cable,” then press . 4 Press V / v to select “Off,” then press . 5 Perform steps 3 - 5 in “To perform Auto Program again” above.
37 Connecting and Setting the TV To fix in a TV channel If you have connected a cable box or satellite receiver to your TV, and do not intend to connect any other audio or video equipment, it is recommended that you fix a TV channel. Doing so will ensure no accidental channel switch when using your TV.
38 TV Exit: Set : Select : Video Return Mode: Vivid Picture: 50 Brightness: 50 Color: 25 Hue: 0 Sharpness: 50 Color T emp.: Cool NR: On Mild Mode: On , To open the menu screen and select the option Press MENU to open the menu screen. Press V / v to select the desired category, then press .
39 Connecting and Setting the TV 1 Press MENU. 2 Press V / v to select (Setup), then press . 3 Press V / v to select “Language,” then press . 4 Press V / v to select your preferred language, then press .
40 MUTING PICTURE WIDE FAV ORITES TV VIDEO 1/2/3 VIDEO 4 VIDEO 5 F1 F2 MENU SLEEP DISPLA Y MODE SA T/ CABLE PO WER FREEZE T OP MENU RESET PIC OFF MTS/SAP GUIDE TV/SA T D VD/ VCR MUTING DISPLAY 2 W atching the TV 2 3 W atching the TV JUMP 1 Press POWER on the remote control.
41 Watching the TV MUTING PICTURE WIDE FAVO R I TES TV VIDEO 1/2/3 VIDEO 4 VIDEO 5 F1 F2 MENU SLEEP DISPLA Y MODE SA T/ CABLE PO WER FREEZE T OP MENU RESET PIC OFF MTS/SAP GUIDE TV/SA T D VD/ VCR 2 - 4 1, 5 2 Press V / v to select (Setup), then press .
42 Press PICTURE repeatedly until the desired mode appears. Each time you press the button, the Picture Mode changes as follows: Picture Mode Description Vivid Standard Pro Tip You can adjust the picture quality options, such as “Picture,” “Brightness,” and “Color,” for each Picture Mode (see pages 59, 60).
43 Watching the TV MUTING PICTURE WIDE FAV ORITES TV VIDEO 1/2/3 VIDEO 4 VIDEO 5 F1 F2 MENU SLEEP DISPLA Y MODE SA T/ CABLE PO WER FREEZE T OP MENU RESET PIC OFF MTS/SAP GUIDE TV/SA T D VD/ VCR 2 - 4 1, 5 TV/SAT 1 Press MENU. 2 Press V / v to select (Audio), then press .
44 Wide Zoom Normal Full Zoom , WIDE MODE Using the Wide Screen Mode MUTING PICTURE WIDE FAVO R I TES TV VIDEO 1/2/3 VIDEO 4 VIDEO 5 F1 F2 MENU SLEEP DISPLA Y MODE SA T/ CABLE PO WER FREEZE T OP MENU .
45 Watching the TV Original source 4:3 source (Standard definition source) Wide Zoom magnify the original picture while keeping original image as much as possible Normal display 4:3 picture in origina.
46 1 Press MENU. 2 Press V / v to select (Screen), then press . 3 Press V / v to select the option you want to set, then press . 4 Press V / v to select the desired screen mode, then press . 5 Press MENU to exit the menu screen. , TV Exit: Set : Select : Video Return Mode: Vivid Picture: 50 Brightness: 50 Color: 25 Hue: 0 Sharpness: 50 Color T emp.
47 Watching the TV Tip To change from one Wide Screen Mode to another, use the WIDE button on the remote control. Notes • The 4:3 Default functions only when the TV receives 480i or 480p signals. • If “4:3 Default” is set to anything but “Off,” the Wide Screen Mode setting changes only for the current channel.
48 Using the Picture Off Function The Picture Off function lets you enjoy music from radio programs of digital broadcasts or DVDs with the TV screen turned off. TV VIDEO 1/2/3 VIDEO 4 VIDEO 5 F1 F2 T OP MENU RESET PIC OFF MTS/SAP GUIDE TV/SA T Press PIC OFF.
49 Watching the TV 2 Press V / v to select (Audio), then press . 3 Press V / v to select “Center Speaker Mode” then press . 4 Press V / v to select the video input (Video 1-5) you want to use the TV’s speakers as the center speaker, then press .
50 Listening to the center speaker sound fr om the TV’ s speakers 1 Press the input select buttons (VIDEO 1/2/3, VIDEO 4 or VIDEO 5) to select the video input selecting “Center Speaker Mode.” 2 Press VOL +/– to adjust the volume of the center speaker sound from the TV’s speakers.
51 Watching the TV , , Exit: Set : Back: Select : Video 1 Audio Return T reble: Bass: Balance: Steady Sound: Effect: MTS: Speaker: Center Speaker Mode Phase: Normal , 2 Press V / v to select (Audio), then press . 3 Press V / v to select “Phase” then press .
52 Setting the Video Inputs You can enjoy images (and sound) from optional video equipment connected to this unit by selecting the appropriate input. For details on connection, see pages 21 through 34.
53 Watching the TV 3 Press V / v to select “Video Label,” then press . 4 Press V / v to select the video input (Video 1-5) you want to assign a label, then press . 5 Press V / v to select the label, then press . To skip the unused video input using the Input Select buttons Press V / v to select “Skip.
54 Using F a v orite Channels You can select programs from a list of favorite channels that you preset. Setting y our fav orite channels 1, 7 2 - 6 1 Press MENU. 2 Press V / v to select (Channel), then press . 3 Press V / v to select “Favorite Channels,” then press .
55 Watching the TV MUTING PICTURE WIDE FAVO R I TES F1 F2 MENU SLEEP DISPLA Y MODE SA T/ CABLE PO WER FREEZE T OP MENU D VD/ VCR W atching fav orite channels 1 2 , , ABC Fa vo r ite Channels 1: ABC 2: HBO 3: MTV 4: FO X 5: CBS 6: COMED 7: 7 8: 8 1 Press FAVORITES.
56 2 Press V / v to select (Channel), then press . 3 Press V / v to select “Channel Label,” then press . 4 Press V / v to select “Channel,” then press . 5 Press V / v to scroll through the channel numbers you want to assign a label, then press .
57 Using Advanced Features 1 Receive the picture you want to adjust, then press MENU. 2 Press V / v to select (Screen), then press . 3 Press V / v to select “V Center,” then press . 4 Press V / v / B / b to adjust the position, then press . 5 Press MENU to exit the menu screen.
58 1 Receive the picture you want to adjust, then press MENU. 2 Press V / v to select (Screen), then press . 3 Press V / v to select “H Center,” then press . 4 Press V / v / B / b to adjust the position, then press . 5 Press MENU to exit the menu screen.
59 Using Advanced Features 1 Press MENU. 2 Press V / v to select (Video), then press . 3 Press V / v to select “Mode,” then press . 4 Press V / v to select the Picture Mode you want to adjust, then press . 5 Press V / v to select “Picture,” then press .
60 6 Press V / v / B / b to make the desired adjustment, then press . Adjustable options Option Picture Brightness Color Hue* Sharpness * The adjustment is not available for the followings: – 480i, .
61 Using Advanced Features 1 Press MENU. 2 Press V / v to select (Audio), then press . 3 Press V / v to select the option you want to adjust, then press .
62 Adjustable options Option Treble* Bass* Balance* Selective options Option Steady Sound* Effect** * To adjust any of these options, set “Speaker” in the (Audio) menu to “On,” or “Audio Out” to “Variable” first. ** To adjust the option, set “Speaker” in the (Audio) menu to “On” first.
63 Using Advanced Features 1 Press MENU. 2 Press V / v to select (Audio), then press . 3 Press V / v to select “MTS,” then press . 4 Press V / v to select the desired reception, then press .
64 1 Press MENU. 2 Press V / v to select (Audio), then press . 3 Press V / v to select “Audio Out,” then press . 4 Press V / v to select the desired option, then press . 5 Press MENU to exit the menu screen. Note “Audio Out” can be selected only when the “Speaker” is set to “Off.
65 Using Advanced Features Using the P arental Contr ol Feature The TV programs and movies shown on TV are given a rating signal based on the following rating systems.
66 MUTING PICTURE WIDE FAVO R I TES TV VIDEO 1/2/3 VIDEO 4 VIDEO 5 F1 F2 MENU SLEEP DISPLA Y MODE SA T/ CABLE PO WER FREEZE T OP MENU D VD/ VCR Activ ating the P arental Control f eature 1 Press MENU.
67 Using Advanced Features To view blocked programs You can view blocked programs by entering the password. 1 Press ENT (enter) when tuned to a blocked program. 2 Enter your four-digit password using the 0-9 buttons. The Parental Control feature will be canceled temporarily until you turn the TV off.
68 1 Perform steps 1 to 7 in “Activating the Parental Control feature” on page 66 to display the Lock options. 2 Press V / v to select “Custom,” then press .
69 Using Advanced Features , TV Exit: Set : Back: Select : Parent TV Rating Return Rating Content TV -Y : – TV -Y7: – FV : – TV -G: – TV -PG: – D: – L: – S: – V : – TV -14: D: L: – S: V : TV -MA: L: S: V : Example: TV rating in U.S.
70 Option Description Allow Block Allows programs and movies that are broadcast without a rating. Blocks all programs and movies that are broadcast without a rating. 9 Repeat step 8 for other extenders. All programs that match the ratings you select and higher, except for the extenders that were canceled, will be blocked.
71 Using Advanced Features U.S. TV ratings U.S. TV ratings are for TV programs rated according to the U.S. Television Parental Guidelines. Option TV-Y (All Children) TV-Y7 (Directed to Older Children).
72 About the extenders of U.S. TV ratings TV-Y7, TV-PG, TV-14 and TV-MA ratings have additional content ratings called “extenders” to define additional viewing limits.
73 Using Advanced Features Canadian French Language ratings The Canadian French Language ratings are for TV programs in French broadcast in Canada. Option G (General) 8 ans+ (8+ General — Not recomm.
74 MUTING PICTURE WIDE FAVO R I TES TV VIDEO 1/2/3 VIDEO 4 VIDEO 5 F1 F2 MENU SLEEP DISPLA Y MODE SA T/ CABLE PO WER FREEZE T OP MENU RESET PIC OFF MTS/SAP GUIDE TV/SA T D VD/ VCR 2 - 7 1, 8 Using the Screen Sa ver Function You can reduce image retention to move the picture position and display a white screen.
75 Using Advanced Features T urning Off the TV A utomatically You can set the TV to turn off automatically after a predetermined period of time (15, 30, 45, 60, or 90 minutes).
76 Press SLEEP repeatedly until the desired period of time appears. Each time you press the button, the period of time changes as follows: While the Sleep timer is activated, the (Timer) LED on the TV lights up in red. To cancel the Sleep timer Press SLEEP repeatedly until “Sleep Off” appears.
77 Additional Information Tr ouble symptoms and remedies Tr oubleshooting Self-diagnosis function The TV is equipped with a self-diagnosis function. If there is a problem with your TV, the 1 (Power on/ Stand by) LED on the front panel will flash repeatedly in red.
78 Poor picture. Double images or ghosts. Only snow and noise appear on the screen. Dotted lines or stripes. No color. Color is not correct. Dark picture. The picture is too bright. Picture (stripe) noise. The screen flickers when turning on the TV. No sound.
79 Additional Information Specifications Television system: American TV standard Channel coverage: VHF: 2-13/UHF: 14-69/CATV: 1-125 Antenna: 75-ohm external terminal for VHF/UHF Screen size (measured .
80 Inde x F Favorite channels .................................. 54 Front and rear connectors ..................... 18 Full ........................................................ 45 H H Center ............................................... 58 I Input select .
.
.
.
Printed on 100% recycled paper . Printed in Japan.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony KE 42M1 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony KE 42M1 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony KE 42M1 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony KE 42M1 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony KE 42M1, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony KE 42M1.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony KE 42M1. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony KE 42M1 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
