Manuale d’uso / di manutenzione del prodotto P3367VE del fabbricante Axis Communications
Vai alla pagina of 71
AXIS P3367–VE Fixed Dome Network Camera User Manual.
About this document This manual is intended for administrators and users of AXIS P3367–VE Fixed Dome Network Camera, and is applicable to rmware 5.60 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product.
Japan こ の 装 置 は 、 ク ラ ス B 情 報 技 術 装 置 で す 。 こ の 装 置 は 、 家 庭 環 境 で使 用 す る こ と を 目 的 と し てい ま す が 、 こ の .
AXIS P3367–VE Fixed Dome Network Camera T able of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AXIS P3367–VE Fixed Dome Network Camera T able of Contents Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Check the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AXIS P3367–VE Fixed Dome Network Camera Hardware Overview Hardware Overview 7 6 2 1 5 4 3 1 Mounting bracket 2 Unit casing 3 Camera unit 4 Fan output connector 5 Heater .
AXIS P3367–VE Fixed Dome Network Camera Hardware Overview Connectors and Buttons For technical specications, see page 65 . Network Connector RJ45 Ethernet connector with P ower over Ethernet (P oE).
AXIS P3367–VE Fixed Dome Network Camera Hardware Overview LED Indicators LED Color Indication Green Steady for connection to a 1 00 Mbit/s network. Flashes for network activity . Amber Steady for connection to a 10 Mbit/s network. Flashes for network activity .
AXIS P3367–VE Fixed Dome Network Camera Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product.
AXIS P3367–VE Fixed Dome Network Camera Access the Product Access from the Internet Once connected, the Axis product is accessible on your local network (LAN). To access the product from the Internet you must congure your network router to allow incoming data trafc to the product.
AXIS P3367–VE Fixed Dome Network Camera Access the Product Set P ower Line Frequency P ower line frequency is set the rst time the Axis product is accessed and can only be changed from Plain Cong (see page 59 ) or by resetting the product to factory default.
AXIS P3367–VE Fixed Dome Network Camera Access the Product The product’s fan is controlled by the ambient temperature and is turned on and off automatically . If required, the fan can be activated manually by clicking the Fan button. T o show the button, go to Setup > Live View Cong .
AXIS P3367–VE Fixed Dome Network Camera Access the Product Speaker button — Click to turn the speakers on or off. Microphone button – Click to mute or unmute the microphone. In Simplex - speaker only mode , the Microphone and T alk buttons must both be active to send audio to the Axis product.
AXIS P3367–VE Fixed Dome Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.
AXIS P3367–VE Fixed Dome Network Camera Media Streams The AMC Control P anel can be used to congure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured.
AXIS P3367–VE Fixed Dome Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.
AXIS P3367–VE Fixed Dome Network Camera Set Up the Pr oduct Set Up the Product The Axis product can be congured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page.
AXIS P3367–VE Fixed Dome Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality . Y ou can congure the following: • Video stream settings. See page 18 . • Stream proles. See page 20 .
AXIS P3367–VE Fixed Dome Network Camera Video and Audio Pixel Counter The pixel counter shows the number of pixels in an area of the image. The pixel counter is useful in situations where there is a requirement that the image is a certain size, for example in face recognition.
AXIS P3367–VE Fixed Dome Network Camera Video and Audio more bandwidth for increased activity in the scene, and less for lower scene activity . MBR allows you to set a target bit rate that limits the bandwidth consumption. The MBR target bit rate works like the ceiling of a tent.
AXIS P3367–VE Fixed Dome Network Camera Video and Audio 1. Go to Setup > Video & Audio > Camera Settings . 2. Select the new capture mode. 3.
AXIS P3367–VE Fixed Dome Network Camera Video and Audio Exposure Settings Congure the exposure settings to suit the image quality requirements in relation to lighting, frame rate and bandwidth considerations. Exposure control - This setting is used to adapt to the amount of light used.
AXIS P3367–VE Fixed Dome Network Camera Video and Audio Day/Night The IR cut lter prevents infrared (IR) light from reaching the image sensor . In poor lighting conditions, for example at night, or when using an external IR lamp, set the IR cut lter to Off .
AXIS P3367–VE Fixed Dome Network Camera Video and Audio To enable overlays: 1. Go to Video & Audio > Video Stream and select the Image tab . 2. T o include an overlay image, select Include overlay image at the coordinates . The overlay image must rst be uploaded to the Axis product, see Overlay Image .
AXIS P3367–VE Fixed Dome Network Camera Video and Audio 3. T o control the image’s position, enter the X and Y coordinates. The X=0 and Y=0 position is the top left corner . If a part of the image is positioned outside the video image, the overlay image will be moved so that the whole image is visible.
AXIS P3367–VE Fixed Dome Network Camera Video and Audio For installation instructions, refer to the product’s Installation Guide. To set focus and zoom: 1. Install the camera as described in the Installation Guide. 2. Go to Video & Audio > Focus & Zoom .
AXIS P3367–VE Fixed Dome Network Camera Video and Audio The Microphone power option provides DC power for an external microphone. Microphone power should only be used with microphones that have no battery . This setting should not be enabled when using a dynamic or battery powered microphone.
AXIS P3367–VE Fixed Dome Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page.
AXIS P3367–VE Fixed Dome Network Camera Configure the Live View Page Browser Viewer Description AMC Recommended viewer in Internet Explorer (H.264/Motion JPEG). QuickTime H.264. Java applet A slower imaging alternative to AMC (Motion JPEG). Requires one of the following installed on the client: • JVM (J2SE) 1.
AXIS P3367–VE Fixed Dome Network Camera Configure the Live View Page - Pulse activates the output for a dened period of time. The pulse time can be set from 1/1 00 second to 60 seconds. - Active/Inactive displays two buttons, one or each action.
AXIS P3367–VE Fixed Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area.
AXIS P3367–VE Fixed Dome Network Camera PTZ (Pan Tilt Zoom) Guard T our A guard tour displays the video stream from different preset positions, one-by-one, in a predetermined order or at random and for congurable time periods. The enabled guard tour will keep running after the user has logged off or closed the browser .
AXIS P3367–VE Fixed Dome Network Camera PTZ (Pan Tilt Zoom) To disable specic controls, deselect the options under Enable/Disable controls . If using multiple view areas, deselecting a control will only disable the control in the selected view area.
AXIS P3367–VE Fixed Dome Network Camera Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely defocused. To send an alarm, for example an email, an action rule must be set up.
AXIS P3367–VE Fixed Dome Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window .
AXIS P3367–VE Fixed Dome Network Camera Detectors High level (1 00%) Only very large objects trigger motion detection. An object that appears in the window triggers motion detection for a long time before it is considered as non-moving. Ordinary colored objects on ordinary backgrounds trigger motion detection.
AXIS P3367–VE Fixed Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting.
AXIS P3367–VE Fixed Dome Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed.
AXIS P3367–VE Fixed Dome Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected.
AXIS P3367–VE Fixed Dome Network Camera Events - Day/Night Mode – Trigger the rule when the product switches between day mode (IR cut lter on) and night mode (IR cut lter off). This can for example be used to control an external infrared (IR) light connected to an output port.
AXIS P3367–VE Fixed Dome Network Camera Events - Use Schedule – Trigger the rule according to the selected schedule. See Create Schedules on page 43 . Actions Available actions include: • Day/Night Vision Mode – Set day mode (IR cut lter on) or night mode (IR cut lter off).
AXIS P3367–VE Fixed Dome Network Camera Events Recipient Use with action Notes Email Send Images Send Notication Send Video Clip An email recipient can contain multiple email addresses.
AXIS P3367–VE Fixed Dome Network Camera Events Create Schedules Schedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outside ofce hours. Use one of the predened schedules or create a new schedule as described below .
AXIS P3367–VE Fixed Dome Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 45 . • To set up action rules, see page 39 .
AXIS P3367–VE Fixed Dome Network Camera Recordings To play a recording, follow these steps: 1. Go to Recordings > List . 2. T o reduce the number of recordings displayed, select the desired options under Filter and click the Filter button to apply the lters.
AXIS P3367–VE Fixed Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. T o switch languages, go to Setup > Languages and rst upload the new language le.
AXIS P3367–VE Fixed Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords.
AXIS P3367–VE Fixed Dome Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups.
AXIS P3367–VE Fixed Dome Network Camera System Options To install a self-signed certicate: 1. Go to Setup > System Options > Security > Certicates . 2. Click Create self-signed certicate and provide the requested information. To create and install a CA-signed certicate: 1.
AXIS P3367–VE Fixed Dome Network Camera System Options Network Basic T CP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously , and at least one version must always be enabled.
AXIS P3367–VE Fixed Dome Network Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.
AXIS P3367–VE Fixed Dome Network Camera System Options Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons.
AXIS P3367–VE Fixed Dome Network Camera System Options Note • For NAT traversal to work, this must be supported by the router . The router must also support UPnP TM .
AXIS P3367–VE Fixed Dome Network Camera System Options SNMP The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the group of devices and management station running SNMP . Community names are used to identify groups.
AXIS P3367–VE Fixed Dome Network Camera System Options Bonjour The Axis product includes support for Bonjour . Bonjour is enabled by default and the product is automatically detected by operating systems and clients that support this protocol. Bonjour can be disabled under System Options > Network > Bonjour .
AXIS P3367–VE Fixed Dome Network Camera System Options The Axis product can be congured to automatically format SD cards that are inserted into the product. If autoformat is enabled and an SD card is inserted, the product will check if the SD card has the ext4 le system.
AXIS P3367–VE Fixed Dome Network Camera System Options P orts & Devices I/O P orts The Axis product provides one input port and one output port for connection of external devices. For information about how to connect external devices, see Connectors on page 68 .
AXIS P3367–VE Fixed Dome Network Camera System Options See also T roubleshooting on page 60 . System Overview To get an overview of the Axis product’s status and settings, go to System Options > Support > System Overview .
AXIS P3367–VE Fixed Dome Network Camera System Options Plain Cong Plain Cong is for advanced users with experience of Axis product conguration. Most parameters can be set and modied from this page. To open Plain Cong, go to System Options > Advanced > Plain Cong .
AXIS P3367–VE Fixed Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version.
AXIS P3367–VE Fixed Dome Network Camera Troubleshooting Emergency Recovery Procedure If power or network connection is lost during the upgrade, the process fails and the product becomes unresponsive. Flashing red Status indicator indicates a failed upgrade.
AXIS P3367–VE Fixed Dome Network Camera Troubleshooting The IP address has been changed by DHCP IP addresses obtained from a DHCP server are dynamic and may change. If the IP address has been changed, use AXIS IP Utility or AXIS Camera Management to locate the product on the network.
AXIS P3367–VE Fixed Dome Network Camera Troubleshooting Lower frame rate than expected See P erformance Considerations on page 69 . Reduce the number of applications running on the client computer . Limit the number of simultaneous viewers. Check with the network administrator that there is enough bandwidth available.
AXIS P3367–VE Fixed Dome Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other read or write problems occur .
AXIS P3367–VE Fixed Dome Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Models AXIS P3367–VE, 5 MP/HDTV 1 080p, multi-view , vandal resistantance, outdoor Image sensor Progressive scan RGB CMOS 1/3.
AXIS P3367–VE Fixed Dome Network Camera T echnical Specifications Function/group Item Specications Users 20 simultaneous users Unlimited number of users using multicast (H.264) Audio streaming Two-way Audio compression AAC LC 8 kHz 32 kbit/s, 16 kHz 64 kbit/s G.
AXIS P3367–VE Fixed Dome Network Camera T echnical Specifications Function/group Item Specications Installation, management and maintenance AXIS Camera Management and web-based conguration Firmware upgrades over HTTP or FTP , rmware available on www .
AXIS P3367–VE Fixed Dome Network Camera T echnical Specifications Function/group Item Specications Video management software (not included) AXIS Camera Companion (included), AXIS Camera Station and video management software from Axis’ Application Development P artners (not included).
AXIS P3367–VE Fixed Dome Network Camera T echnical Specifications 3. 3 V m a x 50 m A 1 2 3 4 Audio Connector 3.5 mm audio connectors (stereo) 1 2 3 1 Tip 2 Ring 3 Sleeve Audio Input Microphone/Line in Ground Audio Output Line out (mono) Ground SD Card Slot Supports SD cards with up to 64 GB of storage.
AXIS P3367–VE Fixed Dome Network Camera T echnical Specifications • Viewing on poorly performing client computers lowers perceived performance. Frame rate affected.
User Manual V er . M4.2 AXIS P3367–VE Fixed Dome Network Camera Date: November 20 14 © Axis Communications AB, 20 1 1 - 2014 P art No. 60653.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Axis Communications P3367VE è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Axis Communications P3367VE - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Axis Communications P3367VE imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Axis Communications P3367VE ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Axis Communications P3367VE, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Axis Communications P3367VE.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Axis Communications P3367VE. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Axis Communications P3367VE insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
