Manuale d’uso / di manutenzione del prodotto AXIS Q6045 del fabbricante Axis Communications
Vai alla pagina of 67
AXIS Q6045-E Mk II PTZ Dome Network Camera User Manual.
About this document This manual is intended for administrators and users of AXIS Q6045-E Mk II PTZ Dome Network Camera, and is applicable to rmware 5.7 0 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product.
Safety This product complies with IEC/EN/UL 60950-1 and IEC/EN/UL 60950-22, Safety of Information Technology Equipment. The product shall be grounded either through a shielded network cable (STP) or other appropriate method.
AXIS Q6045-E Mk II PTZ Dome Network Camera T able of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Hazard Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AXIS Q6045-E Mk II PTZ Dome Network Camera T able of Contents Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Reset to Factory Default Settings . . . . . . . . . . . . . . . . . .
AXIS Q6045-E Mk II PTZ Dome Network Camera Safety Infor mation Safety Infor mation Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury . WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury .
AXIS Q6045-E Mk II PTZ Dome Network Camera Hardware Overview Hardware Overview NO NO NO TICE TICE TICE Make sure the dome is attached in operation mode, otherwise focus may be affected.
AXIS Q6045-E Mk II PTZ Dome Network Camera Hardware Overview NO NO NO TICE TICE TICE The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall be intended for their specic use. Make sure that the network devices are installed in accordance with the manufacturer’s instructions.
AXIS Q6045-E Mk II PTZ Dome Network Camera Hardware Overview Midspan LED Indicators LED Color Indication Unlit No camera connected. Green Steady when camera connected, normal operation. Green, ashing Slow ash when overcurrent or short circuit condition on the port.
AXIS Q6045-E Mk II PTZ Dome Network Camera Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product.
AXIS Q6045-E Mk II PTZ Dome Network Camera Access the Product Set the Root P assword To access the Axis product, you must set the password for the default administrator user root . This is done in the Congure Root P assword dialog, which opens when the product is accessed for the rst time.
AXIS Q6045-E Mk II PTZ Dome Network Camera Access the Product The product’s heater is controlled by the ambient temperature and is turned on and off automatically . If required, the heater can be activated manually by clicking the Heater button. To show the button, go to Setup > Live View Cong .
AXIS Q6045-E Mk II PTZ Dome Network Camera Access the Product Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the mouse pointer . Click the Center mode button and click in the image to center the camera view on that position.
AXIS Q6045-E Mk II PTZ Dome Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.
AXIS Q6045-E Mk II PTZ Dome Network Camera Media Streams The AMC Control P anel can be used to congure various video settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured.
AXIS Q6045-E Mk II PTZ Dome Network Camera Media Streams Note • <ip>= IP address • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.
AXIS Q6045-E Mk II PTZ Dome Network Camera Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. T o open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page.
AXIS Q6045-E Mk II PTZ Dome Network Camera Video Video It is possible to congure the following video features in your Axis product: • Video stream. See page 18 . • Stream proles. See page 19 . • Camera settings. See page 20 . • Overlay image.
AXIS Q6045-E Mk II PTZ Dome Network Camera Video H.264 H.264, also known as MPEG-4 P art 1 0/AVC, is a video compression standard that provides high quality video streams at low bit rates. An H.264 video stream consists of different types of frames such as I-frames and P-frames.
AXIS Q6045-E Mk II PTZ Dome Network Camera Video To select a default stream prole for the Live View page, go to Setup > Live View Cong . Camera Settings The Video > Camera Settings page provides access to advanced image settings for the Axis product.
AXIS Q6045-E Mk II PTZ Dome Network Camera Video Max gain - Measured in decibels (dB), gain describes the amount of amplication applied to a signal, in this case the visual information in the image. A high level of amplication may provide a better image in very low light situations.
AXIS Q6045-E Mk II PTZ Dome Network Camera Video 5. Dene text overlay characteristics in the relevant elds. 6. Click Save . To modify the date and time format, go to System Options > Date & Time .
AXIS Q6045-E Mk II PTZ Dome Network Camera Video To display the overlay image: 1. Go to Video > Video Stream and select the Image tab . 2. Under Overlay Settings , select Include overlay image at the coordinates . 3. To control the image’s position, enter the X and Y coordinates.
AXIS Q6045-E Mk II PTZ Dome Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page.
AXIS Q6045-E Mk II PTZ Dome Network Camera Configure the Live View Page User Dened Links To display user-dened links in the Live View page, select the Show custom link option, give the link a name and then enter the URL to link to. When dening a web link do not remove the 'http://' from the URL address.
AXIS Q6045-E Mk II PTZ Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) Preset P ositions A preset position is a saved view that can be used to quickly steer the camera to a specic position.
AXIS Q6045-E Mk II PTZ Dome Network Camera PTZ (Pan Tilt Zoom) The product can be mounted in three different horizontal directions. This may cause the view from P an 0° to be changed from the original view . Click Set new P an 0° to set the pan coordinate system to zero in the current direction.
AXIS Q6045-E Mk II PTZ Dome Network Camera PTZ (Pan Tilt Zoom) 90° - 90° - 180°/ 180° 0° 90° - 90° - 180°/ 180° 0° A B B A 1 2 Top view A P an limit start B Pan limit end Gatekeeper The Active Gatekeeper monitors an area such as an entrance gate.
AXIS Q6045-E Mk II PTZ Dome Network Camera PTZ (Pan Tilt Zoom) To modify or remove guard tours, go to PTZ > Guard T our , select the guard tour in the Guard Tour List and click Modify/Remove . Note For products that support Limited Guard T our , the product has a xed minimum view time For more information see the online help .
AXIS Q6045-E Mk II PTZ Dome Network Camera PTZ (Pan Tilt Zoom) When Enable E-ip is selected, as it tilts down and continues to pan backwards, the Axis product will automatically correct the view and ip it 180 degrees. The left limit must be set to –180 degrees and the right limit to 180 degrees for e-ip to work.
AXIS Q6045-E Mk II PTZ Dome Network Camera PTZ (Pan Tilt Zoom) Note Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move to preset positions that require a tilt movement. Control Queue Note • The administrator can enable and disable PTZ controls for selected users.
AXIS Q6045-E Mk II PTZ Dome Network Camera Detectors Detectors Shock Detection Enable Shock Detection from the Detectors menu. Shock detection is used, for example, to generate an alarm if the product is hit by an object or if the product is tampered with.
AXIS Q6045-E Mk II PTZ Dome Network Camera Detectors P arameter Object Size History Sensitivity Description Object size relative to window size. Object memory length. Difference in luminance between background and object. High level (1 00%) Only very large objects trigger motion detection.
AXIS Q6045-E Mk II PTZ Dome Network Camera Detectors 1. Choose Area of interest from the drop-down list. Set the virtual area to detect if an object has disappeared from this area of interest. Important When conguring Object size the view shall be zoomed out to Wide position.
AXIS Q6045-E Mk II PTZ Dome Network Camera Detectors 3. Use the Sensitivity slidebar to dene how sensitive the detection should be. The lower sensitivity selected on the Sensitivity bar , the greater difference in luminance is needed between the object and the background for the detector to be activated.
AXIS Q6045-E Mk II PTZ Dome Network Camera Detectors 2. Choose Object size from the drop-down list. Set the size limits of the object that should be detected. The camera will detect any object whose size falls in between the minimum (blue shape) and maximum (white shape) range.
AXIS Q6045-E Mk II PTZ Dome Network Camera Applications Applications AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications for Axis products. For information about available applications, downloads, trials and licenses, go to www .
AXIS Q6045-E Mk II PTZ Dome Network Camera Applications If the Axis product is reset to factory default, uploaded applications and their settings are removed.
AXIS Q6045-E Mk II PTZ Dome Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected.
AXIS Q6045-E Mk II PTZ Dome Network Camera Events - Live Stream Accessed – T rigger the rule when any stream is accessed and during edge storage playback. This can for example be used to send notications. - Motion Detection – T rigger the rule when motion is detected.
AXIS Q6045-E Mk II PTZ Dome Network Camera Events - Recording – T riggers the rule when the Axis product records to the storage device. The recording status trigger can be used to notify the operator , for example by ashing LED lights, if the product has started or stopped to record to the storage device.
AXIS Q6045-E Mk II PTZ Dome Network Camera Events Recipient Types The following recipients are available: Recipient Use with action Notes Email Send Images Send Notication Send Video Clip An email recipient can contain multiple email addresses.
AXIS Q6045-E Mk II PTZ Dome Network Camera Events 3. Enter the email addresses to send emails to in the To eld. Use commas to separate multiple addresses. 4. Select the email provider from the Provider list. 5. Enter the user ID and password for the email account.
AXIS Q6045-E Mk II PTZ Dome Network Camera Events Connect the Cable CAUTION Modications could have a negative effect on the electromagnetic compatibility (EMC) of the whole system. Take appropriate precautions and make sure to properly connect the shield in both ends.
AXIS Q6045-E Mk II PTZ Dome Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 46 . • To set up action rules, see page 39 .
AXIS Q6045-E Mk II PTZ Dome Network Camera Recordings To play a recording, follow these steps: 1. Go to Recordings > List . 2. To reduce the number of recordings displayed, select the desired options under Filter and click the Filter button to apply the lters.
AXIS Q6045-E Mk II PTZ Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. To switch languages, go to Setup > Languages and rst upload the new language le.
AXIS Q6045-E Mk II PTZ Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords.
AXIS Q6045-E Mk II PTZ Dome Network Camera System Options To enable HTTPS on the Axis product: 1. Go to System Options > Security > HTTPS 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL.
AXIS Q6045-E Mk II PTZ Dome Network Camera System Options Note Installed certicates, except preinstalled CA certicates, will be deleted if the product is reset to factory default. Preinstalled CA certicates that have been deleted will be reinstalled.
AXIS Q6045-E Mk II PTZ Dome Network Camera System Options Network Basic TCP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously , and at least one version must always be enabled.
AXIS Q6045-E Mk II PTZ Dome Network Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.
AXIS Q6045-E Mk II PTZ Dome Network Camera System Options Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons.
AXIS Q6045-E Mk II PTZ Dome Network Camera System Options Note • For NAT traversal to work, this must be supported by the router . The router must also support UPnP TM .
AXIS Q6045-E Mk II PTZ Dome Network Camera System Options AXIS Video MIB (Management Information Base) for video hardware can be used to monitor Axis-specic, hardware-related issues that may need administrative attention. For more information about AXIS Video MIB and to download MIB les, go to www .
AXIS Q6045-E Mk II PTZ Dome Network Camera System Options Bonjour can be disabled under System Options > Network > Bonjour . Storage SD Card NO NO NO TICE TICE TICE To prevent data corruption, the SD card should be unmounted before removal. Note For SD card recommendations see www .
AXIS Q6045-E Mk II PTZ Dome Network Camera System Options Important If autoformat is enabled, only use new or empty SD cards. Any data stored on the card will be lost when the card is inserted into the Axis product. To enable automatic formatting, follow these steps: 1.
AXIS Q6045-E Mk II PTZ Dome Network Camera System Options Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings. Note A restart clears all entries in the Server Report.
AXIS Q6045-E Mk II PTZ Dome Network Camera System Options Crash Report - Generates an archive with debugging information. The report takes several minutes to generate. Advanced Scripting Scripting allows experienced users to customize and use their own scripts.
AXIS Q6045-E Mk II PTZ Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version.
AXIS Q6045-E Mk II PTZ Dome Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www .
AXIS Q6045-E Mk II PTZ Dome Network Camera Troubleshooting Problems with streaming H.264 Problems with AXIS Media Control ( Internet Explorer only ) To enable the updating of video images in Internet Explorer , set the browser to allow ActiveX controls.
AXIS Q6045-E Mk II PTZ Dome Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other read or write problems occur .
AXIS Q6045-E Mk II PTZ Dome Network Camera T echnical Specifications T echnical Specifications Models AXIS Q6045-E Mk II 60 Hz AXIS Q6045-E Mk II 50 Hz Camera Image sensor 1/2.8” Progressive Scan CMOS Lens 4.44–142.6 mm, F1.6–4.4 1, Horizontal angle of view: 62.
AXIS Q6045-E Mk II PTZ Dome Network Camera T echnical Specifications External output activation Video recording to edge storage Pre- and post-alarm video buffering PTZ preset, Overlay text, Send SNMP.
AXIS Q6045-E Mk II PTZ Dome Network Camera T echnical Specifications P erformance Considerations When setting up your system, it is important to consider how various settings and situations will affect performance. Some factors affect the amount of bandwidth (the bit rate) required, others can affect the frame rate, and some affect both.
User Manual V er . M5.6 AXIS Q6045-E Mk II PTZ Dome Network Camera Date: May 20 15 © Axis Communications AB, 20 14 - 20 15 P art No. 1463329.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Axis Communications AXIS Q6045 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Axis Communications AXIS Q6045 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Axis Communications AXIS Q6045 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Axis Communications AXIS Q6045 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Axis Communications AXIS Q6045, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Axis Communications AXIS Q6045.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Axis Communications AXIS Q6045. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Axis Communications AXIS Q6045 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
