Manuale d’uso / di manutenzione del prodotto UM022_02 del fabbricante SIIG
Vai alla pagina of 18
User Manual Small Keyboards Version 02 CUE, a.s., K Nouzovu 6, 143 00 Praha 4, Czech Republic Phone: +420 241 091 240, Fax: +420 241 432 446 www.cuesystem.
User Manual Small Keyboards UM022_02, 21.05.2007 Copyright © CUE, a.s., Praha, Czech Republic 1990 - 2007. All rights reserved. Specifications are subject to change without prior notice.
Table of Contents 1. Introduction .................................................................................................................................... 4 1.1. Overview ....................................................................
1. Introduction 1.1. Overview .................................................................... The elegant and i nnovative wired keyboardCUE-S i s a tabletop programm able control panel that i s available in varieties of solid woo d finishes with stainless steel trim.
2. Front Panel The front panel is equi pped with (8) buttons a nd (8) indication LEDs (tabl etop model only) - see picture. (8) buttons (8) button LEDs (8) buttons Button LEDs are controlled by special pr ogramming commands from a control unit. User Manual Small Keyboards www.
3. Button Labels The separate labels for ea ch button can be printed on a transparen cy foil using l aser or inkjet printer. Dimension of the label are • 6.5 mm x 12 mm for normal button • 6.5 mm x 29 mm for double button. It is necessary to disassembly the control panel to change a label.
4. Addressing 4.1. Addressing of keyboardCUE-S (serial number up to CS0174.0128) and keyboardCUE-S /w The ADDRESS of the keyboardCUE-S and keyb oardCUE-S /w can be set in the range 0 to 9 by the firmware. Standard keyboards have address 0, addres se s 1 to 9 are delivered on a special ord er.
4.2. Addressing of keyboardCUE-S (serial number CS0174.0129 and above) The ADDRESS of the keyboardCUE -S can be set in the range 0 to 255 . Default keyboard ADDRESS is 0. The BUTTON_ID transmitt ed by a panel and BUT T ON_LED_ID (tabletop m odel keyboardCUE-S only) are numbers used in th e programming for button a nd bargraph identification.
4.2.1. Setting-up of ADDRESS SW9 1. Unscrew two screws o n bottom side of the keyboard and remove b ottom cover. 2. Push switch SW9 on PCB bottom side; backlig ht LED’s are switched Off to indi cate Set Address Mode .
5. Mounting 5.1. keyboardCUE-S ........................................................... The keyboardCUE-S is a ta bletop model. There are no special mounting reque sts. 5.2. keyboardCUE-S /w ..................................................... The keyboardCUE -S /w ca n be mounted to the t able or to the wall box (not delivered).
6. Connecting 6.1. keyboardCUE-S ........................................................... This model of the keyboa rd is connected to the sy stem by CUEwir e. The keyboard is equip ped with 3 m length or 10 m length cable with 4 -pin connector . Pin conne ction of the CUEwire connecto r is described in the following table.
7. Specifications and Mechanical Drawings 7.1. keyboardCUE-S ........................................................... Buttons layout ...................................... (8) buttons Indication ............................................. (8) LE Ds System connection .
7.2. keyboardCUE-S /w ..................................................... Buttons layout ...................................... (8) single buttons or (4) double buttons System connection .............................. CUEwire (RS -485), screw terminals Power supply .
8. Software and Firmware License END-USER NOTICE AND LICENSE AGR EEMENT FROM CUE, spol. s r.o. NOTICE TO END-USER CAREFULLY READ THE FOLLOWING LEGAL AGREEMENT (T HIS "LICENSE").
9. Warranty Conditions Warranty Duration CUE provides warranty for all CUE products for a period of 3 years from the day of purchase. Th e provided warranty for touch screens is 2 years from the day of purchase. CUE accepts reclam ation of 5 not pro perly working dots and more (2 dots join – 1 counts).
10. CE Declaration of Conformity airCUE-XM8 CS0254-W, CS0254-O, CS0254-M PED202 CS0165-1, CS0165-2 airCUE-XM8 Docking Station CS0260-W, CS0260-O, CS0260-M PEF150 CS0249-1, CS0249-2 analogCUE CS0004 PE.
11. FCC Caution Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note This equipment has been tested and found to comply with the limits fo r a Class B digital device, purs uant to Part 15 of the FCC Rules.
Notes User Manual Small Keyboards www.cuesystem.com Page 18 of 18.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il SIIG UM022_02 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del SIIG UM022_02 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso SIIG UM022_02 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul SIIG UM022_02 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il SIIG UM022_02, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del SIIG UM022_02.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il SIIG UM022_02. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo SIIG UM022_02 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
